Synthesis and characterization of anionic graft copolymers containing poly(ethylene oxide) grafts

Anionic graft copolymers were synthesized through grafting of poly(ethylene glycol) monomethyl ether (MPEG) onto terpolymers containing succicinic anhydride groups. The backbone polymers were prepared through radical terpolymerization of maleic anhydride, styrene, and one of the following monomers: methyl methacrylate, ethylhexyl methacrylate, and diethyl fumarate. MPEG of different molecular weights were grafted onto the backbone through reactions with the cyclic anhydride groups. In this reaction one carboxylic acid group is formed together with each ester bond. The molecular weights of MPEG were found to influence the rate of the grafting reaction and the final degree of conversion. The graft copolymers were characterized by IR, GPC, and ¹H-NMR. Thermal properties were examined by DSC. Graft copolymers containing 50% w/w of MPEG 2000 grafts were found to be almost completely amorphous, presumably because of crosslinking, and hydrogen bonding between carboxylic acid groups in the backbone and the ether oxygens in MPEG grafts. © 1995 John Wiley & Sons, Inc.     

Synthesis of poly(styrene-graft-ethylene oxide) by ethoxylation of amide group containing styrene copolymers

Graft copolymers containing poly(ethylene oxide) side chains on a polystyrene backbone have been synthesized. Styrene copolymers synthesized by free radical mechanism and containing between 5 and 15 mol % acrylamide or methacrylamide were used as backbones. The amide groups in the copolymers were ionized by using potassium tert-butoxide or potassium naphthalene, and grafting was achieved by utilizing the amide anions as initiator sites for the polymerization of ethylene oxide in 2-ethoxyethyl ether at 65°C. The graft copolymers were characterized with respect to molecular weight and composition using elemental analysis, NMR, gel permeation chromatography, IR, and viscosity measurements. The size of the side chains were between 600 and 2000 g/mol. GPC results from a hydrolyzed graft copolymer sample suggest a narrow size distribution for the poly(ethylene oxide) grafts. Solution properties of the graft copolymers were investigated in different toluene/methanol mixtures. The intrinsic viscosities of the graft copolymers were found to depend primarily on the poly(ethylene oxide) content rather than the graft density or the poly(ethylene oxide) chain length. © 1993 John Wiley & Sons, Inc.     

Characterization and demulsification of poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide) copolymers

Four poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide) copolymers with different molecular weights and PPO/PEO composition ratios were synthesized. The characterization of the PEO-PPO-PEO triblock copolymers was studied by surface tension measurement, UV-vis spectra, and surface pressure method. These results clearly showed that the CMC of PEO-PPO-PEO was not a certain value but a concentration range, in contrast to classical surfactant, and two breaks around CMC were reflected in both surface tension isotherm curves and UV-vis absorption spectra. The range of CMC became wider with increasing PPO/PEO composition ratio. Surface pressure Pi-A curves revealed that the amphiphilic triblock copolymer PEO-PPO-PEO molecule was flexible at the air/water interface. We found that the minimum area per molecule at the air/water interface increased with the proportion of PEO chains. The copolymers with the same mass fractions of PEO had similar slopes in the isotherm of the Pi-A curve. From the demulsification experiments a conclusion had been drawn that the dehydration speed increased with decreased content of PEO, but the final dehydration rate of four demulsifiers was approximate. We determined that the coalescence of water drops resulted in the breaking of crude oil emulsions from the micrograph.     

Influence of crystallinity on the morphology of poly(ethylene oxide) containing diblock copolymers

Low-molecular-weight poly(ethylene oxide)-polyalkane (PEO-PA) diblock copolymers have been examined between the order-disorder transition and PEO melting temperature using small-angle neutron scattering (SANS), differential scanning calorimetry (DSC), and dynamic mechanical spectroscopy (DMS). Crystallization imposes layered ordering with polymer stems oriented perpendicular, or tilted, relative to the microdomain interface, thereby disrupting conventional amorphous microdomain morphologies. This effect can be used to switch the high symmetry bicontinuous ordered G phase to lower symmetry cylinders or lamellae.     

Hydrophilic–hydrophobic AB diblock copolymers containing poly(trimethylene carbonate) and poly(ethylene oxide) blocks

AB‐type block copolymers with poly(trimethylene carbonate) [poly(TMC); A] and poly(ethylene oxide) [PEO; B; number‐average molecular weight (M_n) = 5000] blocks [poly(TMC)‐b‐PEO] were synthesized via the ring‐opening polymerization of trimethylene carbonate (TMC) in the presence of monohydroxy PEO with stannous octoate as a catalyst. M_n of the resulting copolymers increased with increasing TMC content in the feed at a constant molar ratio of the monomer to the catalyst (monomer/catalyst = 125). The thermal properties of the AB diblock copolymers were investigated with differential scanning calorimetry. The melting temperature of the PEO blocks was lower than that of the homopolymer, and the crystallinity of the PEO block decreased as the length of the poly(TMC) blocks increased. The glass‐transition temperature of the poly(TMC) blocks was dependent on the diblock copolymer composition upon first heating. The static contact angle decreased sharply with increasing PEO content in the diblock copolymers. Compared with poly(TMC), poly(TMC)‐b‐PEO had a higher Young's modulus and lower elongation at break. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4819–4827, 2005     

Colloidal crystals of core-shell type spheres with poly(styrene) core and poly(ethylene oxide) shell

Elastic modulus and crystal growth kinetics have been studied for colloidal crystals of core–shell type colloidal spheres (diameter = 160–200 nm) in aqueous suspension. Crystallization properties of three kinds of spheres, which have poly(styrene) core and poly(ethylene oxide) shell with different oxyethylene chain length (n = 50, 80 and 150), were examined by reflection spectroscopy. The suspensions were deionized exhaustively for more than 1 year using mixed bed of ion-exchange resins. The rigidities of the crystals range from 0.11 to 120 Pa and from 0.56 to 76 Pa for the spheres of n = 50 and 80, respectively, and increase sharply as the sphere volume fraction increase. The g factor, parameter for crystal stability, range from 0.029 to 0.13 and from 0.040 to 0.11 for the spheres of n = 50 and 80, respectively. These g values indicate the formation of stable crystals, and the values were decreased as the sphere volume fraction increased. Two components of crystal growth rate coefficients, fast and slow, were observed in the order from 10⁻³ to 10¹ s⁻¹. This is due to the secondary process in the colloidal crystallization mechanism, corresponding to reorientation from metastable crystals formed in the primary process and/or Ostwald-ripening process. There are no distinct differences in the structural, kinetic and elastic properties among the colloidal crystals of the different core–shell size spheres, nor difference between those of core–shell spheres and silica or poly(styrene) spheres. The results are very reasonably interpreted by the fact that colloidal crystals are formed in a closed container owing to long-range repulsive forces and the Brownian movement of colloidal spheres surrounded by extended electrical double layers, and their formation is not influenced by the rigidity and internal structure of the spheres.     

Poly(ethylene oxide)-poly(styrene oxide)-poly(ethylene oxide) copolymers: Micellization, drug solubilization, and gelling features

Two new poly(ethylene oxide)-poly(styrene oxide) triblock copolymers (PEO-PSO-PEO) with optimized block lengths selected on the basis of previous studies were synthesized with the aim of achieving a maximal solubilization ability and a suitable sustained release, while keeping very low material expense and excellent aqueous copolymer solubility. The self-assembling and gelling properties of these copolymers were characterized by means of light scattering, fluorescence spectroscopy, transmission electron microscopy, and rheometry. Both copolymers formed spherical micelles (12-14 nm) at very low concentrations. At larger concentration (>25 wt%), copolymer solutions showed a rich phase behavior, with the appearance of two types of rheologically active (more viscous) fluids and of physical gels depending on solution temperature and concentration. The copolymer behaved notably different despite their relatively similar block lengths. The ability of the polymeric micellar solutions to solubilize the antifungal drug griseofulvin was evaluated and compared to that reported for other structurally-related block copolymers. Drug solubilization values up to 55 mg g⁻¹ were achieved, which are greater than those obtained by previously analyzed poly(ethylene oxide)-poly(styrene oxide), poly(ethylene oxide)-poly(butylene oxide), and poly(ethylene oxide)-poly(propylene oxide) block copolymers. The results indicate that the selected SO/EO ratio and copolymer block lengths were optimal for simultaneously achieving low critical micelle concentrations (cmc) values and large drug encapsulation ability. The amount of drug released from the polymeric micelles was larger at pH 7.4 than at acidic conditions, although still sustained over 1 day.     

Compatibility of poly(ethylene oxide)–poly(vinyl acetate) blends

The compatibility of poly(ethylene oxide)–poly(vinyl acetate) (PEO-PVA) blends was examined at five compositions covering the complete range. Samples were prepared by coprecipitation and solution casting. Dynamic mechanical properties were studied at 110 Hz between ?120 and 65°C for dry, quenched, and annealed samples. The study also included tensile testing at 25°C, examination of blend morphology, and DSC measurements at elevated temperatures. Optical microscopy revealed that crystallization of PEO proceeds essentially unhindered at up to 25% poly(vinyl acetate) content by weight. Higher levels of this component drastically reduce spherulite size, and at the highest PVA compositions there was no evidence of crystallization. Thermomechanical spectra of quenched and annealed samples indicate limited mixing of the two components except for the higher (>75%) PVA compositions. Tensile properties show a mutual reinforcement at 10-25% PVA content due to possible polymer segment association. The melting-point depression of PEO is significant above 25% PVA and has been attributed to morphological changes of the PEO crystalline phase.     

Compatibility studies of blends of polycarbonate and poly(ethylene terephthalate)

Blends of bisphenol-A polyarbonate (PC) and poly(ethylene terephthalate) (PET) has been investigated by differential scanning calorimetry and scanning electron microscopy. Blends were prepared by screw extrusion and solution casting with weight fractions of PC in the blends varying from 0.90 to 0.10. From the measured glass transition temperature (T_g) and apparent weight fractions of PC and PET dissolved in each phase, it appears that PET dissolves more in the PC-rich phase than does the PC in the PET-rich phase. The composition-dependent values of the Flory–Huggins polymer–polymer–interaction parameter were determined and found to be from 0.054 to 0.037 for extruded blends at 275°C and from 0.058 to 0.040 for solution casting at 25°C. The interaction parameter decreases with increasing PET concentration. This result is consistent with the values of the T_gs, the microscopy study, and the measured extrudate swell ratios which show that compatibility increases more in the PET-rich compositions than in the PC-rich compositions. The PC–PET blends are not microscopically miscible for all the blend compositions.     

Structural studies of radiation-crosslinked poly(ethylene oxide)

The structure and thermal behavior of freeze-dried gels of radiation-crosslinked high molecular weight poly(ethylene oxide) (PEO) were investigated by optical and electron microscopy, wide-angle x-ray scattering (WAXS), DTA, TGA, and thermomechanical analysis. The gels are highly porous with thin crystalline walls. Small spherulite and hedrite structures are observed on the walls. A model for gel formation in solution is suggested. A statistically homogenous chemical network is formed as a result of intrachain and interchain crosslinking. Simultaneous grafting of macromolecular fragments formed by chain scission also occurs. On increasing the irradiation dose from 1 to 15 Mrad, the degree of crystallinity determined by x-ray diffraction and the total intensity of diffraction gradually decrease. The temperature and enthalpy of melting diminish steeply up to 5 Mrad, fall only slightly from 5 to 8 Mrad, and do not change from 8 to 15 Mrad. By comparing the x-ray and DTA crystallinity values, this is shown to be due not only to reduced crystallinity at higher network density but also to Tree energy changes of entropic origin in crystalline and amorphous regions. Radiation chemical yields, G(-units), for these dose ranges are 100, 38, and 0, respectively. Thermomechanical analysis was used to determine the elastic modulus of compression as a function of the dose absorbed, and the average molecular weight of network chains was estimated. decreases with doses up to 10 Mrad and does not change with further irradiation.     

Compatibility in poly(ethylene oxide)–poly(methyl methacrylate) blends

The compatibility of poly(ethylene oxide)-poly(methyl methacrylate) (PEO-PMMA) blends were examined covering the complete composition range. Up to 20% of PEO content films were transparent and glass transition temperatures were determined by DSC and by refractive index vs. temperature measurements. Only one T_g was obtained for these samples and the relationship between T_g and composition has been evaluated. At higher PEO content crystallization took place and the films were opaque. Melting temperatuures of PEO in blends were determined by DSC. Melting point depression was observed for increasing proportion of PMMA and the binary interaction parameter has been calculated.     

Hydrophilic poly(ethylene oxide)–aramide segmented block copolymers

The present paper discusses block copolymers with segments of either poly(ethylene oxide), poly(propylene oxide), or mixtures of poly(ethylene oxide)/poly(propylene oxide) and monodisperse aramide segments. The length of the polyether segments as well as the concentration of polyethylene oxide was varied. The synthesized copolymers were analyzed by DSC, FTIR, AFM and DMTA. In addition, the hydrophilicity was studied.The crystallinity of the monodisperse aramide segments was found to be high and the crystals, dispersed in the polyether phase, displayed a nano-ribbon morphology. The PEO segments were able to crystallize and this crystalline phase reduced the low-temperature flexibility. The PEO crystallinity and melting temperature could be strongly reduced by copolymerization with PPO segments. By using mixtures of PEO and PPO segments, hydrophilic copolymers with decent low-temperature properties could be obtained.     

Self-diffusion study of poly (ethylene oxide)-poly (propylene oxide)-poly (ethylene oxide) block copolymers in aqueous solution

The self-diffusion of poly (ethylene oxide)-poly (propylene oxide)-poly (ethylene oxide) block copolymers dissolved in deuterated water was investigated by means of pulsed field gradient NMR (PFG-NMR). The polymer forms micelles in the solution and, with increasing temperature, clouding and phase demixing occurs. The self-diffusion coefficient indicates the association of the polymer molecules in the vicinity of the cloud point because of its maximum with increasing temperature. Above the cloud point, two kinds of diffusing species are observed due to phase separation. The faster diffusing species is attributed to the polymer-poor phase. The self-diffusion coefficient of the polymer-rich phase species decreases with increasing temperature above the cloud point due to further association and dehydration. The correlation length of the diffusing associates, calculated from the self-diffusion coefficient and the viscosity by means of the Stokes-Einstein equation is nearly independent of temperature and concentration up to 30 wt-% polymer concentration. The correlation length is about 1.4 nm. It shows a slight maximum at the cloud point.     

Crystallization of polystyrene–poly(ethylene oxide) multiblock copolymers

The heat of fusion of poly(ethylene oxide) blocks has been measured by DSC on twelve polystyrene–poly(ethylene oxide) multiblock (AB)_n copolymers and two ABA triblock copolymers after conditioning at various times and temperatures. Regardless of the length of polystyrene blocks, copolymers with poly(ethylene oxide) blocks with M?_n = 404 showed no heat of fusion, those with M?_n = 900 almost no peaks, those with M?_n = 1960 small broad peaks, and those with M?_n = 5650 clearly observable peaks. the greatest heat of fusion measured for block copolymers was 60–70% of the value for hompolymer. Small-angle x-ray patterns are given. The relation between crystal growth and block length is discussed.     

Thermoreversible gelation of poly(ethylene oxide) biodegradable polyester block copolymers

The gel to sol transition of aqueous solutions of di‐ and triblock copolymers consisting of poly(ethylene oxide) and biodegradable polyesters was studied as a function of temperature. The molecular weight and the chemical composition of the biodegradable blocks, (poly(l ‐lactic acid), poly(dl ‐lactic acid), poly(dl ‐lactic acid‐co‐caprolactone), and poly(dl ‐lactic acid‐co‐glycolic acid)) were varied to investigate the effects of chain packing and relative hydrophobicity on the gel to sol transition. The block copolymers studied formed micelles at lower concentrations in water, while the concentrated solutions experienced a gel to sol transition as the temperature increased. Further increase in temperature resulted in the precipitation of polymers. With increasing molecular weight and chain packing tendency of hydrophobic biodegradable block, the gel to sol transition occurred at lower concentrations and the transition temperature ranged from 0°C to over 90°C in a relatively narrow concentration range. The results obtained in this study confirm the relationship between gelation properties and polymer structure, as well as provide more information for these polymers in drug delivery applications. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 751–760, 1999     

星形聚氧乙烯及星形杂臂氧化乙烯-苯乙烯共聚物的合成

以原子转移自由基偶联法合成了多臂星形聚合物S-PEO和星形杂臂共聚物PEO-PS。以傅立叶红外光谱(FT-IR)和核磁共振(1H NMR)分析方法确定了产物的结构。以GPC分析测试了产物的分子量和分子量分布。GPC分析结果表明所得聚合物分子量增大,分子量分布窄,偶联反应效率可高达99%以上。     

Self-consistent-field analysis of the micellization of carboxy-modified poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymers

The micellization properties of carboxy-modified Pluronics P85 (poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) triblock copolymers) are investigated by means of a molecularly realistic self-consistent-field theory. We consider the, so-called, carboxylic acid end-standing P85 (CAE-85) case where the carboxylic group is located at the end of both PEO parts and the carboxylic acid center-standing P85 (CAC-85) case where each of the carboxylic group presents between the PEO and PPO blocks. The micellization of these copolymers depends on the pH, the added electrolyte concentration phis, and the temperature. It is shown that the aggregation number (Nagg) decreases, whereas the critical micellization concentration (CMC) increases with pH. For the case of increasing phis, the Nagg increases and the CMC decreases. The critical micellization temperature (CMT) and cloud point temperature (CPT) increase with pH at low phis and decrease at increasing phis. The changing from CAE-85 to CAC-85 leads to increasing CMC and CMT, but lower CPT.     

Self-aggregation and phase behavior of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) block copolymers in aqueous solution

The phase behavior and aggregation properties of block copolymers of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (Pluronics, poloxamers) in aqueous solution have recently attracted much attention. Both experimental and theoretical studies are reviewed, not comprehensively, but with the focus on studies, partly cooperative, partly independent, performed by groups in Uppsala (light scattering and fluorescence), Roskilde (rheology and calorimetry), Risø (SANS), Graz (x-ray and speed of sound), and Lund (theoretical model calculations).The phase behavior of these copolymers is similar in many respects to that of conventional nonionic surfactants, with the appearance of hexagonal, cubic, and lamellar liquid crystalline phases at high concentrations. In the isotropic solution phase the critical concentration for micelle formation is strongly temperature dependent, and at a given concentration the monomer to micelle transition occurs gradually over a broad temperature range, partly due to the broad size polydispersity of both the PO- and EO-blocks. For some Pluronic copolymers a transition from globular to long rod-like micelles occurs above a transition temperature, resulting in a strong and sudden increase of viscosity and viscoelasticity of the solution.Size and aggregation numbers have been determined for the globular micelles in some cases, and also the rod-like micelles have been characterized. NMR and fluorescence measurements have provided further information on the properties of the micellar core and mantle. In combination, results from different measurements on the same Pluronics material indicate that the aggregation number of the micelles increases with the temperature, whereas the hydrodynmic radius varies much less. The PEO-mantle of the micelles seems to contract with increasing temperature. The core appears to contain appreciable amounts of PEO in addition to PPO (and also some water). The segregation between core and mantle is not as distinct as in normal micelles, a conclusion which is in line with the predictions from the model calculations.     

Segmented block copolymers of poly(ethylene glycol) and poly(ethylene terephthalate)

A new series of segmented copolymers were synthesized from poly(ethylene terephthalate) (PET) oligomers and poly(ethylene glycol) (PEG) by a two‐step solution polymerization reaction. PET oligomers were obtained by glycolysis depolymerization. Structural features were defined by infrared and nuclear magnetic resonance (NMR) spectroscopy. The copolymer composition was calculated via ¹H NMR spectroscopy. The content of soft PEG segments was higher than that of hard PET segments. A single glass‐transition temperature was detected for all the synthesized segmented copolymers. This observation was found to be independent of the initial PET‐to‐PEG molar ratio. The molar masses of the copolymers were determined by gel permeation chromatography (GPC). © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4448–4457, 2004