Reactions of 4-Hydrazinocarbonylmethylene 3-Arylsydnones and 3-(4-Hydrazinocarbonylphenyl)sydnones

The phenyl ring of 3-(4-hydrazinocarbonylphenyl)sydnone activates a hydrazinocarbonyl group to undergo a series of reactions for preparing heterocyclic compounds including oxadiazoles, dihydropyrroles, and pyrroles. However, the hydrazinocarbonyl group on the C(4)-CH₂ resists a cyclization under the same reaction conditions.     

Catalytic Kinetic Resolution by Enantioselective Aromatization: Conversion of Racemic Intermediates of the Barton–Zard Reaction into Enantioenriched 3‐Arylpyrroles

Racemic 3,4‐dihydro‐2H‐pyrroles, hypothetical intermediates of the Barton–Zard reaction, were synthesized in a highly diastereoselective manner and fully characterized for the first time. Kinetic resolution of the dihydropyrroles with a quinine‐derived thiourea afforded the (+)‐3‐arylpyrrole products and recovered (+)‐3,4‐dihydro‐2H‐pyrroles with high efficiency (s‐factor up to 153). The resolved (+)‐3,4‐dihydro‐2H‐pyrroles underwent subsequent aromatization with a quinidine‐derived thiourea catalyst to afford (?)‐3‐arylpyrroles with excellent central‐to‐axial chirality transfer. In contrast to the well‐accepted Barton–Zard mechanism, the aromatization of the 3,4‐dihydro‐2H‐pyrroles in the presence of a bifunctional catalyst is believed to proceed by an unprecedented sequence involving syn elimination of HNO₂ and aromatization.     

Concise [4+3] cycloaddition reaction of pyrroles leading to tropinone derivatives

A concise [4+3] cycloaddition reaction of pyrroles with 2-(silyloxy)allyl cations has been developed. The oxyallyl cations stabilized with a methylthio group or geminal methyl groups were generated from the corresponding allylic alcohols under the influence of a Brönsted acid (Tf₂NH), respectively. The use of N-nosyl-protected pyrroles as the four-carbon unit was found to give tropinone derivatives in high yield.     

Electrophilic hydrogen-deuterium exchange of some deactivated pyrroles

The rate coefficients and partial rate factors for the hydrogen-deuterium exchange of some 1-substituted pyrroles (1-substituents = -COCH₃, - COC₆H₅, -SO₂CH₃, -SO₂CF₃, -N(CH₃)₃, -NH(CH₃)₂, -SO₂C₆H₅) in deuterated trifluoroacetic acid have been determined. In all cases the rate of exchange is faster at the 2-position. Similarly, the hydrogen-deuterium exchange of some pyrroles with electron withdrawing substituents in the 2-position indicate a relative reactivity of 4→ 5→ 3-position with the selectivity being greatest for the more electron withdrawing groups. A nitro group in the 3-position of pyrrole shows a relative reactivity of 5→2→4-position for the hydrogen-deuterium exchange in deuterated trifluoroacetic acid. A linear correlation is observed for the log of the rate coefficient of the hydrogen-deuterium exchange at the 4-position of some 2-substituted pyrroles and the difference in the calculated energy of formation of the pyrrole and the corresponding 4-deuterated cation.     

Fixation of Atmospheric Nitrogen: Synthesis of Heterocycles with Atmospheric Nitrogen as the Nitrogen Source

Dry air is the source of molecular nitrogen for reactions with TiL₄, Li, and TMSCl (L = Cl, OiPr; TMS = trimethylsilyl). The nitrogen–titanium complexes thus prepared can be used to synthesize indoles, pyrroles, and lactams from carbonyl compounds. Applying this method to 1 provides access to 2 , the key compound in the synthesis of (±)-lycopodine.     

Structural Selectivity of Calix[m]pyrroles[n]furans (m + n = 4) as Ionophores in Ag(I) Ion-Selective Electrodes

A series of octamethylcalix[m]pyrroles[n]furans (m + n = 4), such astrans-octamethylcalix[2]pyrroles[2]furans L ₁ ),cis-octamethylcalix[2]pyrroles[2]furans (L ₂ ) and octamethylcalix[1]pyrrole[3]furans (L ₃ ) have been studied as sensors in liquid membrane ion-selective electrodes for Ag(I) ion. The electrode based on L ₁ , trans-N₂O₂ porphyrinogen, gave the best results with a wide working concentration range of 1.0 × 10^-1 - 1.0 × 10^5.6 M and a Nernstian slope of 57.0 mV/decade. This electrode exhibited a fast response time of 30 s and high selectivity over a number of mono-, di- and tri-valent cations, with only Tl(I) and Hg(II) ion interferences. The effect of anion excluders on the performance of the membrane electrodes has been also studied. The electrode based on L ₁ showed no significant potential changes in the range 2.5 < pH < 7.5. The crystalstructure of L ₃ , NO₃ porphyrinogen, was determined by single crystal X-ray analysis. The crystallographic analysis of L ₃ reveals that its structure is a saddle-shaped 1,3-alternate conformation with enough space to accommodate Ag(I) in the three dimensional cavity.     

Multicomponent Approach Towards the Synthesis of Substituted Pyrroles under Supramolecular Catalysis Using β‐Cyclodextrin as a Catalyst in Water Under Neutral Conditions

Synthesis of substituted pyrroles in H₂O by using β‐cyclodextrin as a supramolecular catalyst is described. This reaction has several advantages over existing methods and provides substituted pyrroles in good‐to‐excellent yields (79–89%). The supramolecular catalysis of the reaction was studied using ¹H‐NMR spectroscopy. β‐Cyclodextrin can be recovered and reused several times without loss of activity.     

From Heteroaromatic Acids and Imines to Azaspirocycles: Stereoselective Synthesis and 3D Shape Analysis

Heteroaromatic carboxylic acids have been directly coupled with imines using propylphosphonic anhydride (T3P) and NEt(iPr)₂ to form azaspirocycles via intermediate N‐acyliminium ions. Spirocyclic indolenines (3H‐indoles), azaindolenines, 2H‐pyrroles and 3H‐pyrroles were all accessed using this metal‐free approach. The reactions typically proceed with high diastereoselectivity and 3D shape analysis confirms that the products formed occupy areas of chemical space that are under‐represented in existing drugs and high throughput screening libraries.     

Direct Synthesis of Highly Substituted Pyrroles and Dihydropyrroles Using Linear Selective Hydroacylation Reactions

Rhodium(I) catalysts incorporating small bite‐angle diphosphine ligands, such as (Cy₂P)₂NMe or bis(diphenylphosphino)methane (dppm), are effective at catalysing the union of aldehydes and propargylic amines to deliver the linear hydroacylation adducts in good yields and with high selectivities. In situ treatment of the hydroacylation adducts with p‐TSA triggers a dehydrative cyclisation to provide the corresponding pyrroles. The use of allylic amines, in place of the propargylic substrates, delivers functionalised dihydropyrroles. The hydroacylation reactions can also be combined in a cascade process with a Rh^I‐catalysed Suzuki‐type coupling employing aryl boronic acids, providing a three‐component assembly of highly substituted pyrroles.     

Synthesis of 2‐Aryl‐5‐oxo‐4‐[2‐(phenylmethylidene)hydrazino]‐2,5‐dihydro‐1H‐pyrrole‐3‐carboxylates by the Reaction between Hydrazones,Acetylenedicarboxylates, and 1‐Aryl‐N,N′‐bis(arylmethylidene)methanediamines

An efficient approach for the preparation of functionalized 2‐aryl‐2,5‐dihydro‐5‐oxo‐4‐[2‐(phenylmethylidene)hydrazino]‐1H‐pyrroles is described. The four‐component reaction between aldehydes, NH₂NH₂?H₂O, dialkyl acetylenedicarboxylates, and 1‐aryl‐N,N′‐bis(arylmethylidene)methanediamines proceeds in EtOH under reflux in good‐to‐excellent yields (Scheme 1). The structures of 4 were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS, and, in the case of 4f , by X‐ray crystallography). A plausible mechanism for this type of reaction is proposed (Scheme 2).     

Vinylic nucleophilic substitution in functionalized 2-vinylpyrroles: a route to a new family of stable enols

2-(2-Cyano-1-ethylthioethenyl)pyrroles easy exchange their ethylthio group for hydroxyl (NaOH, H₂O-methanol, 40-45 °C, 1 h) to give 2-(2-cyano-1-hydroxyethenyl)pyrroles, a new family of stable enols, in 50-94% yields. The vinylic nucleophilic substitution proceeds at the double bond of both the starting pyrroles and their cyclic isomers, 3-iminopyrrolizines. X-ray structure analysis and NMR spectra show the enols to be stabilized by exceptionally strong intramolecular H-bonding.     

Synthesis and characterisation of a calix[4]pyrrole functional polystyrene via ‘click chemistry’ and its use in the extraction of halide anion salts

A polystyrene with pendant calix[4]pyrroles was prepared via ‘click reaction’ strategy. First, a poly(styrene-co-chloromethylstyrene) with approximately 12% of chloro groups was prepared by conventional free radical polymerisation. The chloro groups were then converted to azido groups using NaN₃ in N,N-dimethylformamide. An alkyne-functionalised calix[4]pyrrole was then coupled to the azido-functionalised polystyrene by click chemistry with high efficiency. The resulting polystyrene with pendant calix[4]pyrroles was used to extract fluoride and chloride anions (as their tetrabutylammonium salts) from their aqueous solutions to organic media.     

Expeditious synthesis of diverse spiro fused quinoxaline derivatives using magnetically separable core–shell CoFe2O4@SiO2‐SO3H nanocatalyst under ultrasonication

A magnetically separable core–shell CoFe₂O₄@SiO₂‐SO₃H nanocatalyst has been successfully exploited as a heterogeneous acid catalyst in the synthesis of diversely substituted biologically important spiro fused pyrrolo/indolo[1,2‐a]quinoxaline derivatives through the condensation of N‐(2‐aminophenyl)pyrroles/indoles and various cyclic conjugated 1,2‐diones in ethanol under ultrasonic irradiation. Room temperature synthesis, short reaction time, wide substrate scope, good to excellent yield of products and use of a magnetically separable and recyclable nanocatalyst make this method attractive and practicable.     

Nickel(II) complexes with mono(imino)pyrrole ligands: preparation,structure and ethylene polymerization behavior

A series of unsymmetrical mono(imine)pyrroles (L1–L3) were synthesized by microwave irradiation from 2-acetylpyrrole and a series of dimethylanilines with two methyl groups at different positions on the aniline ring. A simplified synthetic method was initiated to prepare the corresponding nickel complexes NiL₂ (1–3) with direct condensation of mono(imine)pyrrole and nickel chloride. The compounds were determined using a suite of techniques (i.e. ¹H NMR, ¹³C NMR, IR, EA, MS). L1–L3 and 3 were further characterized by X-ray crystal diffraction. The structure of 3 showed that the ligand chelated to nickel with 2?:?1 M ratio, in spite of a 1?:?1 rate of charge. Application of 1–3 in ethylene polymerization indicated that mono(imino)pyrrole nickel complexes showed low activities. The polymerization reaction time and temperature, as well as the ligand structure, influenced the catalytic performance to some extent. Experimental data showed higher activity as –CH₃ on the aniline ring is closer to the imine group.     

Fourfold alkyl wrapping of a copper(II) porphyrin thwarts macrocycle π–π stacking in a compact supramolecular package

Porphyrins are valuable constituents in optoelectronic, catalytic, and other applications, yet control of intermolecular π–π stacking is invariably essential to attain the desired properties. Superstructures built onto the porphyrin, often via meso‐aryl groups, can afford facial encumbrance that suppresses π–π stacking, although some molecular designs have provided insufficient facial coverage and many have entailed cumbersome syntheses. In this study, a copper(II) porphyrin bearing four meso substituents, namely, {10,20‐bis[2,6‐bis(octyloxy)phenyl]‐5,15‐dibromoporphinato}copper(II), [Cu(C₆₄H₈₂Br₂N₄O₄)], was prepared by metalation of the corresponding free‐base porphyrin and was characterized by single‐crystal X‐ray diffraction. The crystal structure reveals a dihedral angle of 111.1 (2)° for the plane of the meso‐aryl group relative to the plane of the porphyrin, with both aryl groups tilted in the same direction. Each of the four octyloxy groups exhibits a gauche conformation for the –OCH₂CH₂– unit but is extended with four or five anti (–CH₂CH₂–/H) conformations thereafter, causing each octyl group to span the dimension of the macrocycle. In a global frame of reference where the two Br atoms define the north/south poles and the two aryl groups are at antipodes on the equator, two octyl groups of one aryl unit project over the northern hemisphere (covering pyrroles A and B), whereas those of the other aryl unit project over the southern hemisphere (covering pyrroles C and D). Together, the four octyl groups ensheath the two faces of the porphyrin in a self‐wrapped assembly. The closest approach of the Cu atom to an octyl methylene C atom (position 6) is 3.5817 (18) Å, the mean separations of neighboring porphyrin planes are 8.059 (4) and 4.693 (8) Å along the a and c axes, respectively, and the center‐to‐center distances between the Cu atoms of neighboring porphyrins are 10.2725 (4), 12.2540 (6), and 12.7472 (6) Å along the a, b, and c axes, respectively. The Hirshfeld surface analysis and two‐dimensional (2D) fingerprint plots provide information concerning contact interactions in the supramolecular assembly of the solid crystal.     

Access to Indoles via Diels–Alder Reactions of 5‐Methylthio‐2‐vinylpyrroles with Maleimides

Diels–Alder reactions of 5‐methylthio‐2‐vinyl‐1H‐pyrroles with maleimides followed by isomerization gave tetrahydroindoles in moderate to good yield. Aromatization using activated MnO₂ in refluxing toluene gave the corresponding 2‐methylthioindoles in good yields, and demethylthioation using Raney nickel gave the 2‐H indoles in excellent yields. The protection of the adducts produced aromatization in improved yield, demonstrating the effectiveness of the methylthio group as a protecting group for pyrroles; however, 5‐methylthio‐2‐vinylpyrrole was shown to perform with slightly less efficiency than 2‐vinylpyrrole in Diels–Alder reactions, indicating the protective group was more deactivating than desired. This route toward indoles offers high convergency and conveniently available starting materials that are easily purified. Bis‐methylthioated vinylpyrroles were shown to have potential as highly activated Diels–Alder dienes.     

Perfluoroalkylated Calix[4]pyrroles: Fluoride Ion Extraction from an Aqueous Medium

Octaalkenyl calix[4]pyrrole ((CH₂=CH(CH₂)₂)₈C4P) is highly useful for the postfunctionalization of different calix[4]pyrroles with desired functionalities. Functionalization with perfluoroalkyl chains [CF₃(CF₂)_n ; R_fn ] gave perfluoroalkyl calix[4]pyrroles (R_fn (CH₂)₄)₈C4P; n =6, 8), having >60 % fluorine content, which created a hydrophobic environment inside the calix[4]pyrrole cavity and recognized fluoride and chloride ions in solution as well as in the solid state. The fluoride ion is extracted efficiently from aqueous CsF and TBAF solutions by using (R_f6(CH₂)₄)₈C4P, as droplets. The fluorinated chain generated a hydrophobic environment which broke the hydration shell associated with the anion and separated out fluoride ions as droplets from aqueous medium. Furthermore, the fluoride ions competitively replaced chloride ions from the (R_f6(CH₂)₄)₈C4P cavity.     

Copper‐Catalyzed One‐Pot Synthesis of Functionalized Pyrroles from Sulfonyl Azides,Alkynes, and (p‐Toluenesulfonyl)methyl Isocyanide

Ketenimine intermediates generated by the addition of copper acetylides to sulfonyl azides are trapped by (p‐toluenesulfonyl)methyl isocyanide (TsCH₂NC), in the presence of Et₃N, to afford functionalized pyrroles in moderate‐to‐good yields.     

(Perhalogenmethylthio)heterocyclen. X. Säurekatalysierte Substitutionen an (Perchlorfluormethylthio)pyrrolen und deren agrobiologische Wirkung

(Perhalomethylthio)heterocycles. X

1 IX. Mitt.: s. [1].

. Acid-catalyzed substitutions on (perchlorofluoromethylthio)pyrroles and their agro-biological activities In the presence of C₄F₉SO₃H the (perhalomethylthio)pyrroles 1a–c react with Cl_3?nF_nCSCl (n = 1–3) to give mixtures of the 2,5- and 2,4-disubstituted pyrroles 2a–f and 3a–h . 2a and 3a react with CF₃SCl (catalyst CF₃SO₃H) yielding 2,3,5-tris (trifloromethylthio)pyrrole ( 4a ), which under similar conditions reacts further to give 2,3,4,5-tetrakis (trifluoromethylthio)pyrrole ( 5 ). As a by-product during the conversion of 3a to 4a 2,3,4-tris (trifluoromethylthio)pyrrole ( 4b ) is formed. The pyrroles 2a , 4a and 5 form the mercury salts 6a–c ; compound 5 yields also a silver salt 7 . The ¹H- and ¹⁹F-NMR. spectra are discussed and the agro-biological properties of the compounds investigated.     

Reactions of a Ruthenium Complex with Substituted N‐Propargyl Pyrroles

In an investigation into the chemical reactions of N‐propargyl pyrroles 1 a – c , containing aldehyde, keto, and ester groups on the pyrrole ring, with [Ru]?Cl ([Ru]=Cp(PPh₃)₂Ru; Cp=C₅H₅), an aldehyde group in the pyrrole ring is found to play a crucial role in stimulating the cyclization reaction. The reaction of 1 a , containing an aldehyde group, with [Ru]?Cl in the presence of NH₄PF₆ yields the vinylidene complex 2 a , which further reacts with allyl amine to give the carbene complex 6 a with a pyrrolizine group. However, if 1 a is first reacted with allyl amine to yield the iminenyne 8 a , then the reaction of 8 a with [Ru]?Cl in the presence of NH₄PF₆ yields the ruthenium complex 9 a , containing a cationic pyrrolopyrazinium group, which has been fully characterized by XRD analysis. These results can be adequately explained by coordination of the triple bond of the propargyl group to the ruthenium metal center first, followed by two processes, that is, formation of a vinylidene intermediate or direct nucleophilic attack. Additionally, the deprotonation of 2 a by R₄NOH yields the neutral acetylide complex 3 a . In the presence of NH₄PF₆, the attempted alkylation of 3 a resulted in the formation the Fischer‐type amino–carbene complex 5 a as a result of the presence of NH₃, which served as a nucleophile. With KPF₆, the alkylation of 3 a with ethyl and benzyl bromoacetates afforded the disubstituted vinylidene complexes 10 a and 11 a , containing ester groups, which underwent deprotonation reactions to give the furyl complexes 12 a and 13 a , respectively. For 13 a , containing an O‐benzyl group, subsequent 1,3‐migration of the benzyl group was observed to yield product 14 a with a lactone unit. Similar reactivity was not observed for the corresponding N‐propargyl pyrroles 1 b and 1 c , which contained keto and ester groups, respectively, on the pyrrole ring.