Polymers from 1,3-dipole addition reactions: The nitrilimine dipole from acid hydrazide chlorides

An investigation of the suitability of the 1,3-dipole addition reaction of bisnitrilimines, generated from the corresponding acid hydrazide chlorides, with diyne and dinitrile dipolarophiles was carried out. The reactions of iso- and terephthaloylphenylhydrazide chlorides and 4,4′-oxydibenzoylphenylhydrazide chloride with the dipolarophiles m- and p-diethynylbenzene, m-divinylbenzene, and perfluoroglutaronitrile in the presence of triethylamine gave moderate molecular weight polymers containing pyrazole or triazole units along the polymer backbone. The polymers were soluble in such polar solvents as hexamethylphosphoramide and acids but had inherent viscosities only as high as 0.32. The thermogravimetric analyses of the finely powdered polypyrazoles showed breaks near 500°C. in air and in nitrogen atmospheres.     

Liquid crystalline lonomers. I. Main-chain liquid crystalline polymer containing pendant sulfonate groups

Liquid crystalline polymers containing sodium sulfonate groups pendant to the polymer backbone were synthesized by an interfacial condensation reaction of brilliant yellow, a sulfonate-containing monomer, with 4,4′-dihydroxy-α,α′-dimethyl benzalazine and a 50/50 mixture of sebacoyl and dodecanedioyl dichlorides. Polymers containing up to ca. 4 mol% brilliant yellow were characterized by elemental analysis and ultraviolet spectroscopy. The polymers were thermally stable to about 300°C, and they exhibited a broad nematic mesophase region of 70–100°C. The solution viscosity behavior in chloroform suggested that intramolecular associations of the sulfonate groups occurred at low polymer concentrations and intermolecular associations predominated at higher concentrations.     

Polymers from 1,3-dipole addition reactions. The nitrilimine dipole from tetrazoles

Polymers containing pyrazole and triazole units in the polymer chain were obtained through the 1,3-dipolar addition reaction of bisnitrilimines generated from tetrazoles with diynes and dinitrile dipolarophiles. The reaction of 2,2′-diphenyl-5,5′-m- and p-phenyleneditetrazole with the dipolarophiles m- and p-diethynylbenzene, terephthalonitrile, tetrafluoroterephthalonitrile, perfluoroglutarylnitrile, and 4,4′-dicyanobiphenyl gave a series of thermally stable polymers of high molecular weight. The polypyrazoles were soluble in acid and in some cases in chlorobenzene or 1,2,4-trichlorobenzene and had intrinsic viscosities as high as 1.67, while the polytriazoles were soluble in 1,2,4-trichlorobenzene and chlorobenzene, but not in acid, and had viscosities ranging up to 0.40. The thermogravimetric analyses of the finely powdered polymers showed breaks near 500°C in air and nitrogen atmospheres.     

Synthesis and properties of vinyl‐terminated and silicon‐containing polysulfones and polyketones

4‐Fluorophenylsulfonylphenyl‐terminated polysulfone and 4‐fluorobenzoylphenyl ketone were prepared with bisphenol A and an excess of bis‐(4‐fluorophenyl)sulfone or 4,4′‐difluorobenzophenone, respectively, at 160 °C using potassium carbonate in N,N‐dimethylacetamide. The resulting polymers were reacted with 4‐hydroxystyrene to synthesize vinyl‐terminated polysulfones and ketones. The silicon‐containing polysulfones and ketones were prepared from the vinyl‐terminated polymer precursor and various H‐functional silanes or siloxanes. The synthesis of silicon‐containing polymers was achieved by hydrosilation with a rhodium catalyst. It was shown that the hydrosilation reaction proceeds with 55:45 chemoselectivity. The resulting polymers were investigated by ¹H NMR spectroscopy, DSC, and thermogravimetric analysis. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2937–2942, 2001     

Aromatic polyamides and polyimides derived from 3,3′-diaminobiphenyl: Synthesis,characterization, and molecular simulation study

In this article a new synthesis of 3,3′-diaminobiphenyl (3,3′-DABP) is described, along with the preparation and characterization of polyamides and polyimides based on it. Reactivity of this monomer was calculated by a molecular simulation study, using ab initio quantum-mechanical methods. Terephthaloyl and isophthaloyl chloride were used for the synthesis of polyamides, while 3,3′,4,4′-biphenylenetetracarboxylic acid dianhydride and 4,4′-(hexafluoroisopropylidene) diphthalic anhydride were used for the synthesis of polyimides. Medium to high molecular weight polymers were attained, with inherent viscosities near or higher than 1.0 dL/g, the solubility of the 3,3′-DABP polymers was much better than that of the homologous polymers from benzidine (4,4′-DABP), the glass-transition temperatures were lower, by about 40°C, and the thermal resistance, as measured by thermogravimetry, was virtually the same. Amorphous films, made from cast polymer solutions, showed excellent mechanical properties, comparable to conventional aromatic polyamides and polyimides. Theoretical calculations demonstrated that the radius of giration, end-to-end distance and density of poly(3,3′-DABP-isophthalamide) were lower than those of poly(4,4′-DABP-isophthalamide), as a consequence of the chain folding induced in the backbone by the m-substitution in 3,3′-DABP. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4646–4655, 1999     

New polyphenylquinoxalines linked by m-terphenyl flexibilizing groups

Three new monomers with phenylglyoxyloyl groups fixed on the 4,4′-, 4,6′-, and 4,4″-positions of m-terphenyl were synthesized by different pathways. They were used to prepare a series of polyphenylquinoxalines by solution polycondensation with 3,3′-diaminobenzidine and 3,3′,4,4′-tetraaminodiphenyl ether. These polymers exhibited excellent oxidative and thermal stability as shown by thermogravimetric analysis and isothermal aging in circulating air between 300 and 450°C. Clear yellow films, cast from m-cresol solution, were used to measure their softening temperature by thermomechanical analysis (TMA). Numerical data thus obtained, indicated a thermoplastic behavior in the temperature range 300 ± 15°C. Crosslinking of the linear polymers by isothermal heat exposure under argon between 300 and 500°C was investigated by means of TMA. Molded materials were fabricated under constant pressure (996 psi) at 500–525°C with an Instron testing machine. These polymers were also used for preliminary evaluation as matrices for 181-E glass reinforced composites. Flexural values obtained after isothermal aging in air up to 400°C indicated a potential use varying from 150 hr at 350°C to 24 hr at 400°C.     

Liquid crystalline ionomers. II. Main chain liquid crystalline polymers with terminal sulfonate groups

Liquid crystalline ionomers containing sulfonate groups on the terminal unit of the chain were synthesized by an interfacial condensation reaction of 4,4′-dihydroxy-α,α′-dimethyl benzalazine, the monofunctional dye fast yellow (FY), and a 50/50 mixture of sebacoyl and dodecanedioyl dichlorides. The weight-average molecular weights were estimated from inherent viscosity measurements to be between 6000–11,000 and the sodium sulfonate concentrations ranged from 0–18.4 meq/100 g polymer. Elemental analyses, however, indicated much higher molecular weights, which suggested that there was a distribution of chains with one, two, or no FY endgroups. The polymers were semicrystalline and melted at ca. 140°C to form nematic mesophases that were stable over a temperature range of ca. 80°C. They were thermally stable to about 350°C. The ionomeric nature of the polymers was confirmed by the presence of intermolecular associations in nonpolar solvents, as demonstrated by dilute solution viscosity measurements.     

Poly(Ether sulfone)s made from 4,4′-dihydroxystilbene and 4,4′-difluorodiphenylsulfone: Synthesis,crosslinking, and epoxidation with hydrogen peroxide

High molecular weight polymers from trans-4,4′-dihydroxystilbene, bisphenols, and 4,4′-difluorodiphenylsulfone were synthesized by a nucleophilic displacement reaction using DMAc as solvent in the presence of potassium carbonate. Characterization and crosslinking studies of these polymers were carried out by DSC, TGA, TMA, x-ray diffraction, and solution and solid NMR. It was found that all polymers can be crosslinked to some extent on heating to 350°C. We also studied the epoxidation of these polymers with hydrogen peroxide in the presence of methyltrioctylammonium tetrakis (diperoxotungsto) phosphate (3—) as the catalyst in a biphasic system. The epoxidized polymers are thermally cross-linkable. Very efficient crosslinking was obtained by heating the epoxidized polymers at 350°C under nitrogen. © 1995 John Wiley & Sons, Inc.     

Thermooxidatively stable articulated benzobisoxazole and benzobisthiazole polymers

Articulated all-para polymers with 2,6-benzobisoxazole and 2,6-benzobisthiazole units in the backbone weree synthesized by copolycondensation in polyphosphoric acid of 4,6-diamino-1,3-benzenediol dihydrochloride and 2,5-diamino-1,4-benzenedithiol dihydrochloride, respectively, with terephthalic acid and reactive 3,3′-biphenyl or 4,4′-(2,2′-bipyridyl) monomers. Inherent viscosities of up to 13.18 dL/g (CH₃SO₃H, 25°C, 0.2 g/dL) were achieved. The average length of the rodlike all-para segments between the relatively flexible biphenyl or bipyridyl units was controlled by the stoichiometry of the copolycondensation reactions. Dependent upon the solids content of the polymerization mixture and the mole proportion of the flexible units in the polymer backbone, copolycondensation proceeded in the liquid-crystalline state to give polymerization mixtures which exhibited lower bulk viscosities than comparable copolycondensation reactions that remained in the isotropic state. Films which exhibited optical birefringence under crossed polars could be cast from methanesulfonic acid solutions of the polymers. Thermooxidative stability of the articulated polymers was evaluated by isothermal aging in air at 371°C. Stability for the polymers was found to decrease slightly with increased content of the flexible biphenyl structure in the polymer backbone. The biphenyl structure was found to be more thermooxidatively stable than the bipyridyl structure.     

Polymers from 1,3-dipole addition reactions: The sydnone dipole

An investigation of the suitability of certain 1,3 dipole addition reactions as polymerization reactions was carried out. Reaction of p-phenylene-3,3′-disydnone and N,N′-hexamethylenedisydnone with the dipolarophiles m- and p-diethynylbenzene, m-divinylbenzene, and p-benzoquinone gave moderate molecular weight polymers containing pyrazole or pyrazoline units along the polymer backbone. The polymers are crystalline and have inherent viscosities of 0.4–0.6. The thermogravimetric analyses of the finely powdered polyprazoles showed breaks near 420°C. in air and 500°C. in nitrogen atmospheres.     

Phenyl-substituted polyquinoxalines

Four phenyl-substituted polyquinoxalines have been prepared by the reaction of combinations of two tetraamines, 3,3′-diaminobenzidine and 3,3,′4,4′-tetraaminodiphenyl ether, with two bisbenzils, 4,4′-dibenzil and 4,4′-oxydibenzil. The polymers were prepared by melt and solution polymerizations. Melt condensations were performed at 180, 220, and 280°C. and samples were periodically removed and characterized. The solution polymerizations consisted of two stages, initially forming an intermediate molecular weight polymer (η_inh 0.6–1.0) which was advanced at 400°C. to final polymer (η_inh 1.5 to 2.2). Clear yellow films, cast from m-cresol solution, exhibited good toughness and flexibility. The phenyl-substituted polyquinoxalines exhibited excellent oxidative and thermal stability. Polymer decomposition temperatures in air were generally about 550°C. Isothermal aging at 371°C. (700°F.) in air showed weight retentions as high as 93 and 50% after 100 and 200 hr., respectively. Weight-average molecular weight determination by light-scattering technique on a polymer with an η_inh of 2.16 suggested a value of 247,000. Certain physical properties of the phenyl-substituted polyquinoxalines are compared with those of the corresponding ordinary polyquinoxalines to illustrate the advantageous effect of introducing a phenyl group on the quinoxaline ring.     

Novel self-dyed wholly aromatic polyamide–hydrazides covalently bonded with azo groups in their main chains

Thermal characteristics of several novel self-dyed wholly aromatic polyamide–hydrazides covalently bonded with azo groups in their main chains and containing o-hydroxy group as a substituent group in the aryl ring of the aminohydrazide part of the polymers have been investigated in nitrogen and in air atmospheres using differential scanning calorimetry, thermogravimetric analyses, infrared spectroscopy, and elemental analyses. The effect of introducing different predetermined proportions of para- and meta-phenylene moieties into the backbone chain of the polymers on their thermal characteristics has been evaluated. Azopolymers having different molecular masses of all para-oriented phenylene type units were also thermally characterized. These polymers were prepared by a low temperature solution polycondensation reaction of either 4-amino-3-hydroxybenzhydrazide or 3-amino-4-hydroxybenzhydrazide with an equimolar amount of either 4,4′-azodibenzoyl chloride (4,4′ADBC), 3,3′-azodibenzoyl chloride (3,3′ADBC), or mixtures of various molar ratios of 4,4′ADBC and 3,3′ADBC in anhydrous N,N-dimethyl acetamide containing 3 % m v^?1 LiCl as a solvent at ?10 °C. All the polymers have the same structural formula except the mode of linking phenylene units in the polymer chain. The content of para- and meta-phenylene moieties was varied within these polymers so that the changes in the latter were 10 mol% from polymer to polymer, starting from an overall content of 0–100 mol%. The results reveal that these polymers are characterized by high thermal stability and could be cyclodehydrated into linear aromatic polymers with alternating 1,3,4-oxadiazole and benzoxazole structural units within the same polymer approximately in the region of 200–480 °C, either in nitrogen or in air atmospheres by losing water from the hydrazide and o-hydroxybenzamide groups, respectively. Along with the cyclodehydration, the polymer may lose molecular nitrogen from the azo groups. This is not a true degradation, but rather a thermo-chemical transformation reaction of the evaluated polymers into the corresponding poly(1,3,4-oxadiazolyl-benzoxazoles). The resulting poly(1,3,4-oxadiazolyl-benzoxazoles) start to decompose in the temperature range above 330–560 °C, either in nitrogen or in air atmospheres without mass loss at a lower temperature. The thermal and thermo-oxidative stabilities of the polymers are affected by the nature and amount of arylene groups incorporated into their chains, being higher for polymers with greater content of para-oriented phenylene rings, which permits more interchain hydrogen bonds as a result of greater chain symmetry, packing efficiency, and rod-like structure. Increasing the content of para-oriented phenylene rings leads to a strong improvement in both the initial decomposition temperature as well as in the residual mass at a particular temperature. The stability of the polymers was found to be independent of their molecular masses. This confirms that high thermal stability is not a polymer property which would depends upon the length of its macromolecular chains, but rather upon its chemical structure in which all and every atomic group contributes by its own thermal stability to the macroscopic properties of the whole polymer.     

Preparation and properties of a new aromatic polyamide with an ethoxycarbonyl pendant group: Poly(4,4′‐diamino‐2′‐ethoxycarbonyl‐benzanilide terephthalamide)

A new aromatic polyamide containing a pendant ethoxycarbonyl group was successfully synthesized from the reaction between 4,4′‐diamino‐2′‐ethoxycarbonylbenzanilide and terephthaloyl chloride. The new polymer was soluble in organic solvents such as N‐methyl‐2‐pyrrolidone and dimethylacetamide, and a tough and transparent film was cast from the polymer solution with viscosities ranging from 2.6 to 5.6 dL/g. When the polymer film was heat‐treated at a temperature greater than 300 °C, a cyclization reaction occurred between the ethoxycarbonyl group and the adjacent amide bond to form a benzoxazinone unit in the polymer backbone. The thermal decomposition onset temperature of the cyclized film was about 523 °C, which was somewhat lower than that of poly(p‐phenylene terephthalamide) (PPTA; 566 °C); however, the decomposition rate was slower than that of PPTA to yield a higher char residue. The dispersion temperature of the uncyclized poly(4,4′‐diamino‐2′‐ethoxycarbonylbenzanilide terephthalamide) (PDEBTA) was about 340 °C, whereas that of the cyclized PDEBTA was not clear. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 936–942, 2000     

Synthesis and characterization of main chain liquid crystalline ionomers containing sulphonate groups

A series of main chain liquid crystalline ionomers containing sulphonate groups pendent to the polymer backbone were synthesized by an interfacial condensation reaction of 4,4′‐bis(1,10‐sebacyloxo)benzoic acid, brilliant yellow (BY), and 4,4′‐biphenyldiol. 4,4′‐Bis(1,10‐sebacyloxo)benzoic acid exhibited nematic schlieren texture during heating and cooling. The ionomers are thermotropic liquid crystalline polymers and thermally stable to about 270°C. They exhibit broad mesophase regions over a range of 220°C and the same nematic mesomogen with a colourful thread texture as B₀‐LCP, which implies that the introduction of an ionic group did not change the texture of the B₀‐LCP. However, the thermotropic liquid crystalline properties were somewhat weakened when the concentration of BY was more than 5%. The inherent viscosity in N,N‐dimethylformamide solution suggested that intermolecular associations of sulphonate groups occurred at low concentration, and intermolecular associations predominated at higher concentration.     

Synthesis of regiocontrolled poly(4,6-di-n-butoxy-1,3-phenylene) by oxidative coupling polymerization

Poly(4,6-di-n-butoxy-1,3-phenylene) ( 6 ) was prepared by oxidative coupling polymerization of 1,3-di-n-butoxybenzene ( 1 ) or 2,2′,4,4′-tetra-n-butoxy biphenyl (3). Polymerizations were conducted in nitrobenzene in the presence of FeCl₃ at room temperature and produced polymers with number-average molecular weights up to 42,000. The effects of various factors, such as amount of FeCl₃ and reaction temperature and time were studied. The structure of polymer 6 was characterized by 270 MHz ¹H- and 68.5 MHz ¹³C-NMR spectroscopies and was estimated to consist of almost completely 1,3-linkage. The regiocontrolled polymer was readily soluble in common organic solvents. Thermogravimetric analysis of polymer 6 showed 10% weight loss at 390°C in nitrogen. © 1997 John Wiley & Sons, Inc. J Polym Chem 35 : 2259–2266, 1997     

Poly(enamine-ketones) from hydrogen-terminated aromatic dipropynones and aromatic diamines

Poly(enamine-ketones) were prepared by the nucleophilic (Michael-type) addition of various aromatic diamines to 1,1′-(1,3- or 1,4-phenylene)bis(2-propyn-1-one)(1,3 or 1,4-PPO) in m-cresol at 5–23°C. The low molecular weight polymers (inherent viscosity of 0.25 dL/g) exhibited limited solubility in organic solvents. Glass transition temperatures were generally undetectable by differential scanning calorimetry while polymer decomposition temperatures (10% weight loss), as measured by thermogravimetric analysis, were observed from 355 to 419°C. Polymers prepared from 1,4-PPO were semi-crystalline as shown by wide-angle X-ray diffraction. The poly(enamine-ketone) structure was confirmed by matching infrared spectral characteristics of the polymers with those of well-characterized model enamine ketones.     

Dynamic mechanical relaxation effects in some poly(arylene sulfones)

Poly-4,4′-oxydiphenylenesulfonyl and poly-4,4′-methylenediphenylenesulfonyl were synthesized by an electrophilic substitution polymerization of the arylene monosulfonyl chloride monomers. The glass-transition temperatures T_g of these polymers were determined by calorimetric and dynamic mechanical measurements, and the number-average molecular weights were determined by vapor-pressure osmometry. Both polymers were found to have the same T_g at equivalent molecular weight; the limiting value at high molecular weight is 238°C. Both polymers have two dynamic mechanical relaxation peaks at temperatures far below T_g. One is in the neighborhood of 0°C, and the other is at ?110°C. Plausible origins for these relaxations, and the absence of any near 0°C in poly(4,4′-isopropylidenediphenylene-co-4,4′-sulfonyldiphenylene dioxide), are discussed.     

Synthesis of high molecular weight poly(ether ketone)s by polycondensation of activated bis(aryl chloride)s with bisphenolates

The ability to achieve high molecular weight poly(ether ketone)s from the polycondensation of bis(aryl chloride)s with bis(phenolate)s has been consistently demonstrated. The polymerizations presented here help to delineate for specific bis(aryl chloride)/bisphenolate pairs the reaction conditions required to obtain high molecular weight polymers. Polycondensation of 1,3-bis(4-chlorobenzoyl)-5-tert-butylbenzene ( 6 ) and 2,2′-bis(4-chlorobenzoyl)-biphenyl ( 15 ) with various bisphenolates as well as of 2,2′-bis(4-hydroxyphenoxy)biphenyl ( 33 ) with 4,4′-dichlorobenzophenone ( 41 ) and 1,3-bis(4-chlorobenzoyl)benzene ( 43 ) were used as representative model systems to select reaction conditions that led to high molecular weight polymers. © 1995 John Wiley & Sons, Inc.     

Carborane polymers. IV. Polysiloxanes

Carboranes attached to silicon through straight-chain alkyl groups were prepared and characterized for thermal stability by TGA and molecular weight change on heating. The monomers for these polymers were prepared generally by platinum-catalyzed addition of a silylhydride to an alkenyl or dialkenyl carborane. Polymerization was effected by hydrolysis-condensation of chlorosilanes, ring opening of cyclosiloxanes, and condensation of alkoxy and chlorosilanes. Two types of polymer structures were prepared, one contained m-carborane in the chain backbone, the other contained o-carborane as pendant alkylcarborane groups. Both types were obtained as elastomers; however, higher proportions of carborane in the polymers reduced elasticity and finally resulted in nonelastomers. TGA of the backbone carborane siloxane polymer indicated degradation at 370°C. in nitrogen and at 235°C. in air. Chain scission, as determined by molecular weight decrease, was observed on heating in nitrogen at 350°C. TGA of the pendant carborane siloxane polymer indicated that degradation in nitrogen and in air occurred at greater than 400°C. However, chain scission, as determined by molecular weight decrease, was observed upon heating at 300°C. in nitrogen.     

Synthesis of conjugated polymers with azobenzene moieties in the main chain

Poly(phenylenevinylene)‐based conjugated polymers with azobenzene groups in the main chains were prepared by the Pd‐catalyzed coupling polymerization of divinylarenes with dihaloarenes. The Pd‐catalyzed coupling polymerization of 4,4′‐divinylazobenzene with dihaloarenes such as 1,3‐dibromobenzene, 1,4‐dibromo‐2,5‐dihexylbenzene, 4,4′‐dibromoazobenzene, and 4,4′‐diiodoazobenzene resulted in polymers with poor solubility. In contrast, soluble polymers containing azobenzene moieties in the main chains were attainable from divinylbenzenes with 4,4′‐dihaloazobenzenes if either or both of the monomers possessed hexyl groups on the aromatic rings. The number‐average molecular weight of the polymer exceeded 10,000 under optimized conditions, and the polymer showed a remarkably redshifted absorption in the visible region (456 nm). ¹H NMR and IR spectra supported that the polymers having only trans‐geometry for the double bonds. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1057–1063, 2000