Donor–acceptor complexes in copolymerization. LVIII. Alternating diene–dienophile copolymers. 12. Structure of furan–maleic anhydride copolymers prepared from the monomers and the diels-Alder adduct

The copolymerization of furan with maleic anhydride in the presence of a perester or azobisiso-butyronitrile at 50 or 70°C yields an unsaturated equimolar, alternating copolymer in which the furan units have 3,4 unsaturation and 2,5 linkages. The furan–maleic anhydride Diels-Alder adduct undergoes retrograde dissociation in solution at 70°C and, in the presence of radical catalysts, yields the same unsaturated alternating copolymer as is obtained from the monomers. The adduct undergoes homopolymerization in the presence of a rapidly decomposing perester at 50°C to yield a saturated polymer having a rearranged structure containing 3-oxabicyclo[2.2.1]heptane-5,6-dicarboxylic anhydride repeating units with 2,7 linkages.     

Characterization of chloroprene and maleic anhydride copolymer by 13C-NMR spectroscopy and pyrolysis GC/MS

The radical copolymerizations of chloroprene (CP) and maleic anhydride (MAH) were carried out with AIBN in 1,4-dioxane at 60°C. The monomer reactivity ratios were estimated as r₁ (CP) = 0.38 and r₂ (MAH) = 0.07. Microstructures in the copolymer of chloroprene (CP) and maleic anhydride (MAH) were investigated by 75.4 MHz ¹³C-and 300 MHz ¹H-NMR spectroscopies. Resonances were assigned to the monomer sequence dyads CC, CM, and MC (C = chloroprene, M = maleic anhydride). Well resolved fine structure in the ¹³C-NMR spectra showed that 1,2- and 3,4-structural chloroprene units were negligible in the copolymer. The pyrolysis characterization of the copolymer was also investigated by the pyrolysis gas chromatography mass spectrometry (GC/MS). The fragments of CP and MAH monomers and CP-MAH hybrid dimer, CO, and CO₂ were identified after pyrolysis of the copolymer. © 1994 John Wiley & Sons, Inc.     

A study of the ring size in the copolymer of divinyl ether and maleic anhydride by H-NMR spectroscopy

The well-known alternating 1:2 cyclocopolymer of divinyl ether (DVE) and maleic anhydride (MA) possesses a wide spectrum of biological activities, including antitumor. Recent research on the structure of a variety of cyclopolymers has raised a question about the ring size of this cyclocopolymer. In this article we report on an extensive spectroscopic study of its structure. By use of deuterated monomers the H-NMR peaks at δ 2.31, 3.47, 4.06, and 4.49 ppm with an area ratio of 2:1:1:1 were assigned to the hydrogens of methylenes, methines on the backbone anhydride unit, methines on the ring anhydride unit, and methines adjacent to oxygen on the cyclic ether ring, respectively. By examination of the possible isomeric structures of the bicyclic ring, the splitting of each peak group was further assigned for cis and trans disubstitutions on the anhydride unit. The splitting pattern from the 300-MHz NMR spectrum of the DVE-2,3-dideuteriomaleic anhydride (DMA) copolymer confirmed the unsymmetrical ring structure. ¹³C-NMR spectra were consistent with the conclusion from the H-NMR spectra. A chair-form, six-membered ring with predominantly trans geometry in the anhydride ring was assigned to the structure of DVE–MA copolymer. On the basis of little or no change in the ¹³C-NMR spectra of the copolymers prepared at different temperatures it was concluded that there was no significant change in structure with temperature. This led to the assignment of the energetically favored, six-membered ring structure to the copolymer prepared under these conditions. A mechanism for cyclocopolymerization, based on the HOMO–LUMO interaction of the comonomers and the intramolecular radical addition on the preoriented double bond, was proposed. This mechanism leads to the formation of the six-membered ring structure of the copolymer as the only product. A ¹³C-NMR study of the structure of the copolymer prepared in chloroform by Kunitake and Tsukino is being published as a companion article.     

Preparation of Quaternary Amphiphilic Block Copolymer PMA-b-P (NVP/MAH/St) and Its Application in Surface Modification of Aluminum Nitride Powders

Poly(methyl acrylate)-b-poly(N-vinyl pyrrolidone/maleic anhydride/styrene) (PMA-b-P (NVP/MAH/St)) quaternary amphiphilic block copolymer prepared by reversible addition-fragmentation chain transfer (RAFT) was used to improve the anti-hydrolysis and dispersion properties of aluminum nitride (AIN) powders that were modified by copolymers. Its structure was characterized by Fourier transform infrared spectroscopy (FT-IR) and Hydrogen nuclear magnetic spectroscopy (¹H-NMR). The results demonstrate that the molecular weight distribution of the quaternary amphiphilic block copolymers is 1.35–1.60, which is characteristic of controlled molecular weight and narrow molecular weight distribution. Through charge transfer complexes, NVP/MAH/St produces a regular alternating arrangement structure. After being treated with micro-crosslinking, AlN powder modified by copolymer PMA-b-P(NVP/MAH/St) exhibits outstanding resistance to hydrolysis and can be stabilized in hot water at 50 °C for more than 14 h, and the agglomeration of powder particles was improved remarkably.     

The first example of the copolymerization of cyclic acid anhydrides with oxetane by bulky titanium bisphenolates

The copolymerization of oxetane with glutaric anhydride was found to proceed with bulky titanium bisphenolate ( 1 ) as the initiator. The ¹H NMR spectrum of the produced copolymer shows that the copolymer contains both alternating units and oxytrimethylene units in the polymer main chain. 1 was also effective for the copolymerization of oxetane with other cyclic acid anhydrides, affording the corresponding copolymers. With the titanium bisalkolate complex ( 4 ), a copolymer rich in alternating sequences was obtained.     

Poly[2,2-dimethyl-4-(methoxylcarbonyl) butylene]: Synthesis with an ethylaluminum sesquichloride–peroxide initiator and NMR characterization

The alternating copolymer of isobutylene and methyl acrylate (the polymer of the title) has been obtained by using ethylaluminum sesquichloride (AlEt_1.5Cl_1.5) and 2-methylpentanoyl peroxide as the initiating system in benzene solution. The alternating copolymer is obtained at an acrylate/Al molar ratio of 17. Higher ratios increase the level of acrylate residues in the copolymer isolated; in the absence of AlEt_1.5Cl_1.5, an equal molar feed gives a copolymer with 75 mole % acrylate units. ¹H- and ¹³C-NMR spectra have been used to study the details of polymer structure and support the equal molar, alternating nature of the macromolecule. The details of the methoxy and gem-dimethyl peaks in the PMR spectra are consistent with a Bernoullian process determining the polymer configurational sequences, with P_m = 0.55–0.60.     

Donor-Acceptor Complexes in Copolymerization. XXXVI. Alternating Diene-Dienophile Copolymers. 4. Copolymerization of Furan and 2-Methylfuran with Maleic Anhydride

Abstract

The copolymerization of furan and 2-methylfuran with maleic anhydride in the presence of a radical catalyst yields equimolar, alternating copolymers in which the furan units have a 2,5-linkage (NMR and IR). The copolymerization appears to have a floor temperature of about 40°C. The furan-maleic anhydride Diels-Alder adduct polymerizes in solution in the presence of a radical catalyst at temperatures above 60°C to yield the identical copolymer as is obtained from the monomers. The adduct undergoes a retrograde reaction above 60°C to regenerate the monomers which then copolymerize through excitation of the ground state comonomer charge transfer complex.     

Donor-Acceptor Complexes in Copolymerization. LIX. Alternating Diene-Dienophile Copolymers. 13. Copolymerization of Dicyclopentadiene and Maleic Anhydride

The solution and bulk copolymerization of dicyclopentadiene (DCP) and maleic anhydride (MAH) occurs over the temperature range 80–240°C, upon the addition of a free-radical catalyst which has a short half-life at the reaction temperature. An unsaturated 1/1 MAH/DCP copolymer, derived from the copolymerization of MAH with the norbornene double bond, followed by a Wagner-Meerwein rearrangement, is obtained in the presence of a large excess of DCP at 80° C, while a saturated 2/1 MAH/ DCP copolymer, derived from the cyclocopolymerization of the residual cyclopentene unsaturation, is obtained at higher temperatures or in the presence of excess MAH. The copolymers prepared under other conditions with intermediate MAH/DCP mole ratios contain both 1/1 and 2/1 repeating units. The copolymer obtained from bulk copolymerization above 170° C contains units derived from cyclopentadiene-MAH cyclocopolymerization as well as DCP-MAH copolymerization.     

Copolymerization of furan with maleic anhydride initiated by thioglycolic acid

Copolymerization of furan (F) with maleic anhydride (MAH) initiated by thioglycolic acid (TGA) was studied in various solvents and temperatures in the presence of atmospheric oxygen. Copolymer between F and MAH was readily obtained by using thiol compounds as initiators. The atmospheric oxygen catalyses the copolymerization reaction. The rate of copolymerization is proportional to the concentration [TGA]^0.55 at low concentrations (< 1.0 mol/L), at higher concentrations rates decrease gradually. The copolymerization rate increases with increase in copolymerization temperature and varies with the total monomer concentration as ([F] + [MAH])^1.9. The overall energy of activation as calculated from the Arrhenius plot has been found to be 6.4 Kcal/mol within the temperature range of 25–50°C.     

Donor-Acceptor Complexes in Copolymerization. XXXVII. Alternating Diene-Dienophile Copolymers. 5. Formation of Conjugated Diene-Maleic Anhydride Copolymers through Retrograde Dissociation of Furan-Maleic Anhydride Diels-Alder Adduct

Abstract

The equimolar, alternating copolymer of isoprene, as well as other conjugated dienes, and maleic anhydride is formed by the radical catalyzed reaction of the conjugated diene with maleic anhydride in the presence of furan as well as with the furan-maleic anhydride Diels-Alder adduct. The retrograde dissociation of the cyclic adduct above 60°C regenerates furan and maleic anhydride which in the presence of isoprene forms the isoprene-maleic anhydride ground state complex. The latter yields the corresponding cyclic adduct in the absence of a radical catalyst and undergoes excitation and homopolymerization in the presence of a catalyst.     

Donor-Acceptor Complexes in Copolymerization. XVIII. Alternating Diene–Dienophile Copolymers. 1. Conjugated Diene–Maleic Anhydride Copolymers through Radical-Catalyzed Polymerization

The copolymerization of isoprene, butadiene, and other conjugated dienes with maleic anhydride was readily initiated in polar solvents by conventional free radical catalysts, including peroxides, hydroperoxides, and azobisisobutyronitrile, at high concentrations or at temperatures at which the catalyst had a half-life of 1 hr or less and the total reaction time was 0.5-1 hr. Decreasing the reaction temperature or the rate of catalyst addition resulted in increased yields of Diels-Alder adduct and decreased yields of copolymer. The molecular weight decreased as the temperature increased. Dioxane and tetrahydrofuran peroxides, obtained by the passage of oxygen or UV irradiation in air, also initiated the copolymerization. The soluble diene-maleic anhydride copolymers were equimolar and alternating, had [n] 0.1-6 (cyclohexanone) and contained 75-95% 1,4 structure according to ozonolysis, titration with IC1 and NMR. The IR spectrum of the butadiene–maleic anhydride copolymer indicated 75-95% cis-1,4, 5-20% trans-1,4 and 0-5% 1,2-vinyl unsaturation. The proposed mechanism of polymerization involves a donor-acceptor (diene-dienophile) interaction generating a ground-state charge transfer complex which is readily converted to the cyclic adduct. Under the influence of radicals the ground-state complex is transformed into an excited complex which undergoes polymerization. High concentrations of radicals are necessary to generate polymerizable excited complexes in competition with adduct formation.     

Synthesis and micellization of amphiphilic poly(sebacic anhydride)–poly(ethylene glycol)–poly(sebacic anhydride) block copolymers

Amphiphilic biodegradable block copolymers [poly(sebacic anhydride)–poly(ethylene glycol)–poly(sebacic anhydride)] were synthesized by the melt polycondensation of poly(ethylene glycol) and sebacic anhydride prepolymers. The chemical structure, crystalline nature, and phase behavior of the resulting copolymers were characterized with ¹H NMR, Fourier transform infrared, gel permeation chromatography, and differential scanning calorimetry. Microphase separation of the copolymers occurred, and the crystallinity of the poly(sebacic anhydride) (PSA) blocks diminished when the sebacic anhydride unit content in the copolymer was only 21.6%. ¹H NMR spectra carried out in CDCl₃ and D₂O were used to demonstrate the existence of hydrophobic PSA domains as the core of the micelle. In aqueous media, the copolymers formed micelles after precipitation from water‐miscible solvents. The effects on the micelle sizes due to the micelle preparation conditions, such as the organic phase, dropping rate of the polymer organic solution into the aqueous phase, and copolymer concentrations in the organic phase, were studied. There was an increase in the micelle size as the molecular weight of the PSA block was increased. The diameters of the copolymer micelles were also found to increase as the concentration of the copolymer dissolved in the organic phase was increased, and the dependence of the micelle diameters on the concentration of the copolymer varied with the copolymer composition. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1271–1278, 2006     

Preparation and structural characterization of poly(4-vinylphenylacetate-co-maleic anhydride)

Poly(4-vinylphenylacetate-co-maleic anhydride) was synthesized by free-radical initiation to yield a 1:1 copolymer over a 0.2-0.8 mole fraction range of monomer feed in maleic anhydride. Evidence of 1:1 charge transfer complex between 4-vinylphenylacetate and maleic anhydride was obtained in the UV region at 355 nm. The ¹³C NMR chemical shifts and ¹H NMR integration data indicate that poly(4-vinylphenylacetate-co-maleic anhydride) has an alternating and stereoregular structure. The molecular weight of poly(4-vinylphenylacetate-co-maleic anhydride) was controlled by using specific solvents and initiator concentrations.     

Peroxide-catalyzed grafting of maleic anhydride onto molten polyethylene in the presence of polar organic compounds

The crosslinking of LDPE resulting from reaction with dicumyl peroxide at 180°C is increased in the presence of maleic anhydride (MAH). The presence of electron-donating nitrogen-containing compounds (amides, lactams, disubstituted aromatic amines, and amine oxides), phosphorous-containing compounds (phosphites, phosphates, phosphonates, phosphoramides, and phosphine oxides) and sulfur-containing compounds (sulfoxides, aryl disulfides, and thiazyl disulfides) which inhibit the homopolymerization of MAH but not that of methyl methacrylate, prevents crosslinking and yields soluble PE containing MAH units. Crosslinking, due to coupling of PE^˙ macroradicals formed by hydrogen abstraction from PE by excited MAH, is prevented by electron donation from the additive to the MAH⁺ cation which is present in the MAH+?MAH excimer as well as in the excimer which is appended to the PE.     

Structure and properties of chlorinated polyvinyl chloride graft copolymer with higher property

In this work, maleic anhydride (MAH) was grafted onto chlorinated polyvinyl chloride (CPVC) with high chlorine content (66 wt%) via in‐situ chlorinating graft copolymerization (ISCGC) to obtain the material with improved mechanical strength, softening point, and thermal stability of the material. The structure of the graft product (CPVC‐cg‐MAH) was characterized by FTIR, ¹H NMR, GPC, and UV. CPVC‐cg‐MAH contains less vinylidene chloride (CCl₂) units and double bond than corresponding CPVC. Meanwhile, the number–average molecular weight (M_n) and weight–average molecular weight (M_w) of CPVC‐cg‐MAH are increased, but distribution of molecular weight (M_w/M_n) is decreased. Then, the tensile strength and notched impact strength of CPVC‐cg‐MAH increased by 14.5 and 34.6%, respectively. Furthermore, the results of DMA, DSC, TG, and Vicat softening point showed that the loss peak of CPVC‐cg‐MAH was higher evidently than CPVC and moved to high temperature, the glass transition temperature (T_g) of CPVC‐cg‐MAH was consistent with CPVC, initial weight loss temperature, and maximum weight loss rate temperature of CPVC‐cg‐MAH increased by 7.2°C and 6.1°C, respectively, and the Vicat softening temperature of CPVC‐cg‐MAH increased by 15°C and up to 130°C. Copyright © 2011 John Wiley & Sons, Ltd.     

Controlled alternating copolymerization of St with MAh in the presence of DBTTC

The copolymerization of styrene (St) with maleic anhydride (MAh) performed at 22 °C in the presence of dibenzyl trithiocarbonate exhibits controlled nature evidenced by: narrow molecular weight distribution, controlled molecular weight and first-order polymerization kinetics. The composition analysis of the copolymers obtained by ¹³C NMR spectra shows the molar fraction of St in obtained copolymers is almost equal to 0.5 throughout the copolymerization. The sequence structure of the copolymer was obtained from DEPT experiments by recording the spectra at π/4 and 3π/4, and then combining them together, the results showed that the copolymers obtained possessed well-defined alternating structure. The experiment shows that charge-transfer-complex formed from St and MAh participates in both initiation and chain growth throughout the copolymerization.     

New method of synthesis of electroactive polyamide with amine‐capped aniline pentamer in the main chain

A novel way to prepare an electroactive polyamide (alternating copolymer) is presented. Well‐defined molecular structure polyamide with amine‐capped aniline pentamer in the main chain was obtained. The copolymer has been characterized by Fourier‐transform infrared (FTIR) spectra, ¹H NMR, elemental analysis (EA), and gel permeation chromatography (GPC). Its chemical oxidation process was studied by UV–vis spectra and the electrochemical analysis was checked by cyclic voltammetry (CV). It was found that the obtained electroactive polyamide shows three redox peaks in the cyclic voltammetry, which is different from the polyaniline. Moreover, the thermal properties of the copolymer were evaluated by thermogravimetric analysis (TGA). The electrical conductivity is about 2.5 × 10^?6 S cm^?1 at room temperature. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 477–482, 2006     

A polarity‐activation strategy for the high incorporation of 1‐alkenes into functional copolymers via RAFT copolymerization

A new synthetic methodology for the preparation of copolymers having high incorporation of 1‐alkene together with multifunctionalities has been developed by polarity‐activated reversible addition‐fragmentation chain transfer (RAFT) copolymerization. This approach provides well‐defined alternating poly(1‐decene‐alt‐maleic anhydride), expanding the monomer types for living copolymerizations. Although neither 1‐decene (DE) nor maleic anhydride (MAn) has significant reactivity in RAFT homopolymerization, their copolymers have been synthesized by RAFT copolymerizations. The controlled characteristics of DE‐MAn copolymerizations were verified by increased copolymer molecular weights during the copolymerization process. Ternary copolymers of DE and MAn, with high conversion of DE, could be obtained by using additive amounts (5 mol %) of vinyl acetate or styrene (ST), demonstrating further enhanced monomer reactivities and complex chain structures. When ST was selected as the third monomer, copolymers with block structures were obtained, because of fast consumption of ST in the copolymerization. Moreover, a wide variety of well‐defined multifunctional copolymers were prepared by RAFT copolymerizations of various functional 1‐alkenes with MAn. For each copolymerization, gel permeation chromatography analysis showed that the resulting copolymer had well‐controlled M_n values and fairly low polydispersities (PDI = 1.3–1.4), and ¹H and ¹³C NMR spectroscopies indicated strong alternating tendency during copolymerization with high incorporation of 1‐alkene units, up to 50 mol %. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3488–3498, 2008     

Donor-Acceptor Complexes in Copolymerization. XXXV. Alternating Diene-Dienophile Copolymers. 3. Copolymerization of cis- and trans-1, 3-Pentadiene with Maleic Anhydride and Acrylonitrile… AlEt1.5CI1.5

Abstract

The copolymerization of the cis or trans isomers of 1,3-pentadiene with maleic anhydride in the presence of a peroxide catalyst yields identical equimolar, alternating copolymers in which the pentadiene units have a cis-1, 4 configuration (IR, NMR). The copolymerization of the cis or trans isomers of 1, 3-pentadiene with acrylonitrile in the presence of ethyl aluminum sesquichloride yields identical equimolar, alternating copolymers in which the pentadiene units have a trans-1,4 configuration (IR, NMR). Although the trans isomer forms cyclic adducts with both maleic anhydride and acrylonitrile, the cis isomer does not undergo the Diels-Alder reaction with these dienophlles. The formation of identical copolymers from cis- and trans-1, 3-pentadiene is attributed to isomerization of the diene-dienophile charge transfer complex in the excited state, resulting in the generation of the same homopolymerizable exciplex from both isomers.     

Functional copolymer/organo‐MMT nanoarchitectures. XIX. Nanofabrication and characterization of poly(MA‐alt‐1‐octadecene)‐g‐PLA layered silicate nanocomposites with nanoporous core–shell morphology

Novel bioengineering functional copolymer‐g‐biopolymer‐based layered silicate nanocomposites were fabricated by catalytic interlamellar bulk graft copolymerization of L‐lactic acid (LA) monomer onto alternating copolymer of maleic anhydride (MA) with 1‐octadecene as a reactive matrix polymer in the presence of preintercalated LA…organo‐MMT clay (reactive ODA‐MMT and non‐reactive DMDA‐MMT) complexes as nanofillers and tin(oct)₂ as a catalyst under vacuum at 80°C. To characterize the functional copolymer layered silicate nanocomposites and understand the mechanism of in situ processing, interfacial interactions and nanostructure formation in these nanosystems, we have utilized a combination of variuous methods such as FT‐IR spectroscopy, X‐ray diffraction (XRD), dynamic mechanical (DMA), thermal (DSC and TGA‐DTG), SEM and TEM morphology. It was found that in situ graft copolymerization occurred through the following steps: (i) esterification of anhydride units of copolymer with LA; (ii) intercalation of LA between silicate galleries; (iii) intercalation of matrix copolymer into silicate layers through in situ amidization of anhydride units with octadecyl amine intercalant; and (iv) interlamellar graft copolymerization via in situ intercalating/exfoliating processing. The main properties and observed micro‐ and nanoporous surface and internal core–shell morphology of the nanocomposites significantly depend on the origin of MMT clays and type of in situ processing (ion exchanging, amidization reaction, strong H‐bonding and self‐organized hydrophobic/hydrophilic interfacial interactions). This developed approach can be applied to a wide range of anhydride‐containing copolymers such as random, alternating and graft copolymers of MA to synthesize new generation of polymer‐g‐biopolymer silicate layered nanocomposites and nanofibers for nanoengineering and nanomedicine applications. Copyright © 2014 John Wiley & Sons, Ltd.