Cationic ring-opening polymerization of new 1,6-anhydro-β-lactose derivatives

Synthesis and cationic ring-opening polymerization of new 1,6-anhydro-β-lactose derivatives such as hexa-O-methylated (LSHME), tert-butyldimethylsilylated (LSHSE), and benzylated 1,6-anhydro-β-lactoses (LSHBE) were first investigated. The disaccharide monomers were prepared by methylation, tert-butyldimethylsilylation, and benzylation of 1,6-anhydro-β-lactose, respectively. It was found that LSHME was readily polymerized with such Lewis acid catalysts as PF₅ and SbCl₅ to give stereoregular 2,3-di-O-methyl-4-O-(2′,3′,4′,6′-tetra-O-methyl-β-D -galactopyranosyl)-(1→6)-β-D -glucopyranans which are comb-shaped polysaccharide derivatives. However, LSHSE and LSHBE had almost no polymerizability. It was revealed that the ring-opening polymerizability of the anhydrodisaccharide monomers was influenced by the steric hindrance of the hydroxyl-protective groups. Ring-opening copolymerization of LSHME with 1,6-anhydro-2,3,4-tri-O-benzyl-β-D -glucopyranose (LGTBE) in various ratios of monomer feeds was also examined to afford the corresponding copolymers. Structural analyses of the monomers and polymers were carried out by means of high resolution nuclear magnetic resonance spectroscopy.     

Synthesis of stereoregular heteropolysaccharides having amino-groups by ring-opening copolymerization of 1,6-anhydro-azido-sugar derivatives

The cationic, ring-opening copolymerization of 1,6-anhydro-2-azido-3,4-di-0-benzyl-2-deoxy-(2-ABG), -3-azido-2,4-di-0-benzyl-3-deoxy- (3-ABG), -4-azido-2,3-di-0-benzyl-4-deoxy-β-D -glucopyranose (4-ABG) with 1,6-anhydro-2,3,4-tri-0-benzyl-β-D -glucopyranose (LGTBE) was investigated with phosphorus pentafluoride as catalyst at low temperatures, giving highly stereoregular, (1→6)-α-linked copolymers with number-average molecular weights of 3.90 × 10⁴?9.27 × 10⁴. Structure and composition of the copolymers were determined by ¹H- and ¹³C-NMR spectroscopies and elemental analysis, which indicated that copolymerization occurred in a stereoregular manner to give azido groups containing (1→6)-α-linked glucopyranan derivatives. The differences in polymerizability among the three azido monomers are discussed. Regioselective reduction of three kinds of heteropolysacharide derivatives which had different quantities of azido groups at C-2, -3, or -4 position with lithium aluminum hydride and subsequent debenzylation of the copolymers with sodium in liquid ammonia produced amino-group-containing heteropolysaccharides.     

Copolymerization of anhydroglucose and anhydromannose derivatives: Structure,reactivity, and conformational analyses

Phosphorus pentafluoride-catalyzed copolymerization of 1,6-anhydro-2,3,4-tri-O-(p-methylbenzyl)-β-D -glucopyranose (TXGL, monomer G) and 1,6-anhydro-2,3,4-tri-O-benzyl-β-D -mannopyranose (TBMN, monomer M) appears to follow classical copolymerization theory. Reactivity ratios calculated by the procedure of Mayo and Lewis were r_G = 0.90 ± 0.08, r_M = 11.5 ± 0.80, from which sequence distributions were calculated. A conformational analysis of anhydro sugar polymerization is presented to explain differences in reactivity of monomers and their derived cations in polymerization and copolymerization. The polymers and copolymers were characterized by viscosity, ¹H- and ¹³C-NMR spectroscopy, optical rotation, and circular dichroism. The reaction gives stereoregular polymers as have other polymerizations and copolymerizations of this class.     

Acid-catalyzed polymerization of 1,6-anhydro-β-D-glucopyranose

A number of 1,6-anhydrides were polymerized in the melt at 115°C by use of monochloroacetic acid as catalyst. In the early stages of polymerization (up to 40–50% monomer consumed), each monomer was found to disappear by a first-order rate process. The 1,6-anhydrides investigated and their relative rates of polymerization were: 1,6-anhydro-2-O-methyl-β-D -glucopyranose, 1.0; 1,6-anhydro-3,4-di-O-methyl-β-D -glucopyranose, 1.4; 1,6-anhydro-2-O-methyl-β-D -galactopyranose, 2.3; 1,6-anhydro-3-O-methyl-β-D -glucopyranose, 2.6; 1,6-anhydro-4-O-methyl-β-D -glucopyranose, 6.3; 1,6-anhydro-4-O-(β-D -glucopyranosyl) β-D -glucopyranose, 9.0; 1,6-anhydro-β-D -galactopyranose, 17; 1,6-anhydro-β-D -glucopyranose, 37; 1,6-anhydro-β-D -mannopyranose, 91; and 1,6-anhydro-2-deoxy-β-D -arabino-hexopyranose, 240. The effect of substitution on the rate of polymerization suggests this reaction is mechanistically related to the acid hydrolysis of pyranosides. The results suggest that polymerization proceeds in two stages: (1) an initial build-up of dimer followed by (2) a slower growth to higher molecular weight material.     

Synthesis of Hyperbranched Polysaccharide by Thermally Induced Cationic Polymerization of 1,6-Anhydrohexopyranose

The thermally induced cationic polymerizations of 1,6-anhydro-β-D -glucopyranose ( 1a ), 1,6-anhydro-β-D -mannopyranose ( 1b ) and 1,6-anhydro-β-D -galactopyranose ( 1c ) as a latent cyclic AB₄-type monomer were carried out using (S-2-butenyl)tetramethylenesulfonium hexafluoroantimonate ( 2 ) as an initiator. The solution polymerization in propylene carbonate proceeded without gelation to produce the water-soluble hyperbranched polysaccharides ( 3a-c ) with controlled molecular weights and narrow polydispersities. The degree of branching (DB), estimated by the methylation analysis of 3a-c , was in the range of 0.38 – 0.49. The thermally induced cationic polymerization of 1a-c using 2 is a facile method leading to a hyperbranched polysaccharide with a high DB value.     

Copolymerization of 1,6-anhydroglucose and 1,6-anhydromaltose derivatives

The copolymerization of 1,6-anhydro-2,3,4-tri-O-(p-methyl-benzyl)-β-D -glucopyrnose [TXGL, M₁] with 1,6-anhydro-2,3-di-O-benzyl-4-O-(2,3,4,6-tetra-O-benzyl-α-D -glucopyranosyl)-β-D -glucopyranose [HBMA, M₂] has been studied as a method of producing dextrans of controlled composition with a linear backbone and randomly distributed single glucose units as side chains. Copolymers of intrinsic viscosities ranging from 0.51 to 0.05 dl/g are produced. The copolymerization appears to follow classical copolymerization theory but is affected adversely by the low reactivity of the maltose derivative. Reactivity ratios have been calculated for runs catalyzed by 10 mole-% and 20 mole-% phosphorus pentafluoride (PF₅): r₁ = 1.91 ± 0.35, r₂ = 0.28 ± 0.25 and r₁ = 2.21 ± 0.15, r₂ = 0.21 ± 0.10, respectively.     

Talopyranose Derivatives Suitable for the Planned Synthesis of Teichoic Acids Containing Di-Glycosylated Ribitol Units

ABSTRACT

Easily accessible 1,6-anhydro-2,3-O-(S)-benzylidene-β-D-mannopyranose was converted in four steps to 1,6-anhydro-3,4-di-O-benzyl-β-D-talopyranose. Glycosylation of the latter with ethyl 2,3,4-tri-O-acetyl-1-thio-α-L-rhamnopyranoside gave, after further processing, 1-O-allyl-3,4-di-O-benzyl-2-O-(2,3,4-tri-O-benzyl-α-L-rhamnopyranosyl)-L-ribitol.     

Synthesis of a (1→6)-β-Linked N-Acetyl-d-glucosamine Oligosaccharide1

Abstract

1,6-Anhydro-2-deoxy-3,4-di-O-benzyl-2-phthalimido-β-d- glucopyranose (5) was synthesized from 1,6-anhydro-β-d-mannopyranose (1) in five steps. Compound 5 was polymerized under cationic conditions and selectively yielded glucosamine oligomers (degree of polymerization 5-7). Copolymerization of 5 with 1,6-anhydro-2,3,4-tri-O-benzyl-β-d-glucopyranose indicated the low reactivity of 5 with the active cation derived from 5. Deprotection of 2-deoxy-3,4-di-O-benzyl-2-phthalimido-(1→6)-β-d-glucopyranan (7) and N-acetylation gave 2-acetamido-2-deoxy-(1→6)-β-d-glucopyranan (9).     

Amphiphilic Graft Copolymers as Phase-Transfer Catalysts in a Solid-Liquid System

Abstract

Amphiphilic graft copolymers consisting of a hydrophobic backbone and poly(oxyethylene) (PEO) side chains were employed as solidliquid phase-transfer catalysts (PTC) in the substitution of octylbromide by solid potassium phenoxide in toluene. A wide variety of structures were synthesized via ester substitution of poly(phthalimidoacrylate) (PPIA) or poly(phthalimidoacrylate-co-styrene) [poly(PIA-co-St)] with amino-functionalized methoxy-PEO (MPEO-NH₂). The phase-transfer catalytic activity (PTA) of these soluble graft copolymers was studied as a function of the structure of the backbone, the length of the side chains, and the graft density. The graft copolymers of a high degree of grafting showed PTA higher than that of parent PEOs. GPC was used to study the behavior of the graft copolymers in toluene at 90°C. It is believed that the phase-transfer reaction is accelerated in the PEO microphase.     

Elucidation of high ring‐opening polymerizability of methylated 1,6‐anhydro glucose

1,6‐Anhydro glucose was extracted from a wood tar that is a by‐product of charcoal manufacture. After methylation of the 1,6‐anhydro glucose, the starting monomer, 1,6‐anhydro‐2,3,4‐tri‐O‐methyl‐β‐D ‐glucopyranose (LGTME), was obtained. We found that LGTME had high ring‐opening polymerizability and polymerized under mild conditions. With BF₃OEt₂ catalyst under ordinary pressure and N₂ atmosphere at 0 °C, LGTME gave high molecular weight of polymer with 1,6‐α stereoregularity in a high yield, even though benzylated 1,6‐anhydro glucose monomer (LGTBE) gave no polymers by the same polymerization conditions. The GPC profile showed two absorptions corresponding to = 272 × 10³ and = 390 × 10⁴ in the proportion of 4.5:1. Furthermore, under high vacuum condition at 0 °C, LGTME gave the corresponding polymer and the lower molecular weight increased to = 364 × 10³. To reveal the high polymerizability of LGTME, two‐step polymerization was performed. After the first stage of polymerization under ordinary pressure for 6 h at 0 °C, the second LGTME monomer was added to the polymerization mixture and then the polymerization was continued. It was found that the lower molecular weight of the resulting polymer increased to = 394 × 10³ and the yield was 78%. These results suggest that poly(LGTME) after the first‐stage polymerization has stable propagating end which has a restarting ability for the ring‐opening polymerization. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1013–1022, 2009     

An analytical evaluation of anhydrosugar polymerizations

1,6-Anhydro-2,3,4-tri-O-(p-methylbenzyl)-β-D-glucopyranose (TXGL, M₁) has been copolymerized with 1,6-anhydro-2,3,4-tri-O-benzyl-β-D-glucopyranose (TBGL, M₂). Reactivity ratios, calculated by the Mayo and Lewis procedure, are r₁ = r₂ = 1.25 ± 0.25. Within experimental error these values represent azeotropic copolymerization. Therefore preceding interpretations of the relative reactivity of TXGL and other benzylated anhydrosugars are not incorrect because the possible effect of p-methyl substitution was ignored. Analysis of this copolymerization system and the reported copolymerizations of TXGL with 1,6-anhydro-2,3,4-tri-O-benzyl-β-D-manno-(TBMN) and galactopyranoses (TBGA) by the linear method recently proposed by Kelen and Tudos has confirmed that true copolymerization takes place in all the systems mentioned above and that the classical copolymerization theory adequately describes the copolymerization mechanism. Physical properties of the copolymers of TXGL and TBGL indicate the usual high stereoregularity of structure.     

Copolymerization of 1,6-anhydro-ß-D-galactopyranose and 1,6-anhydro-ß-D-mannopyranose derivatives

1,6-Anhydro-2,3,4-tri-O-(p-methylbenzyl)-ß-D -galactopyranose (TXGal,M₁) has been copolymerized with 1,6-anhydro-2,3,4-tri-O-benzyl-ß-D -mannopyranose (TBMan,M₂), the products characterized by NMR, specific rotation, and viscosity, and the reactivity ratios calculated. The reactivity ratios r₁ = 0.37 ± 0.15 and r₂ = 38 ± 4 indicate that the anhydromannose derivative is about 100 times as reactive as that of anhydrogalactose. A comparison of glucose, mannose, and galactose copolymerizations suggests that the reactivity differences of the three propagating cations are comparatively small and the reactivity differences of the monomers large. This result is consistent with a mechanism proposed earlier. Methyl substitution on the aromatic rings of the p-xylyl groups inhibits the initiation process significantly relative to benzyl, but propagation only slightly.     

Synthesis and ring-opening polymerization of new 1,4-anhydro-glucopyranose derivatives

Three new 1,4-anhydro-glucopyranose derivatives having different hydroxyl protective groups such as 1,4-anhydro-2,3,6-tri-O-methyl-α-D -glucopyranose (AMGLU), 1,4-anhydro-6-O-benzyl-2,3-di-O-methyl-α-D -glucopyranose (A6BMG), and 1,4-anhydro-2,3-di-O-methyl-6-O-trityl-α-D -glucopyranose (A6TMG) were synthesized from methyl α-D -glucopyranoside in good yields. Their polymerizability was compared with that of 1,4-anhydro-2,3,6-tri-O-benzyl-α-D -glucopyranose (ABGLU) reported previously. The trimethylated monomer, AMGLU, was polymerized by a PF₅ catalyst to give 1,5-α-furanosidic polymer having number-average molecular weights (M̄_n) in the range of 2.8 × 10³ to 6.8 × 10³. The ¹³C-NMR spectrum was compared with that of methylated amylose and cellulose. Other anhydro monomers, A6BMG and A6TMG, gave the corresponding 1,5-α furanosidic polymers having M̄_n = 17.1 × 10³ and 1.8 × 10³, respectively. Thus, the substituents at the C2 and C6 positions were found to play an important role for the ring-opening polymerizability of the 1,4-anhydro-glucose monomers. In addition, debenzylation of the tribenzylated polymer gave free (1 → 5)-α-D -glucofuranan. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 841–850, 1998     

Synthesis of amphiphilic block–graft copolymers [poly(styrene‐b‐ethylene‐co‐butylene‐b‐styrene)‐g‐poly(acrylic acid)] and their aggregation in water

Novel block–graft copolymers [poly(styrene‐b‐ethylene‐co‐butylene‐b‐styrene)‐g‐poly(tert‐butyl acrylate)] were synthesized by the atom transfer radical polymerization (ATRP) of tert‐butyl acrylate (tBA) with chloromethylated poly(styrene‐b‐ethylene‐co‐butylene‐b‐styrene) (SEBS) as a macromolecular initiator. The copolymers were composed of triblock SEBS as the backbone and tBA as grafts attached to the polystyrene end blocks. The macromolecular initiator (chloromethylated SEBS) was prepared by successive hydrogenation and chloromethylation of SEBS. The degree of chloromethylation, ranging from 1.6 to 36.5 mol % according to the styrene units in SEBS, was attained with adjustments in the amount of SnCl₄ and the reaction time with a slight effect on the monodispersity of the starting material (SEBS). The ATRP mechanism of the copolymerization was supported by the kinetic data and the linear increase in the molecular weights of the products with conversion. The graft density was controlled with changes in the functionality of the chloromethylated SEBS. The average length of the graft chain, ranging from a few repeat units to about two hundred, was adjusted with changes in the reaction time and alterations in the initiator/catalyst/ligand molar ratio. Incomplete initiation was detected at a low conversion; moreover, for initiators with low functionality, sluggish initiation was overcome with suitable reaction conditions. The block–graft copolymers were hydrolyzed into amphiphilic ones containing poly(acrylic acid) grafts. The aggregation behavior of the amphiphilic copolymers was studied with dynamic light scattering and transmission electron microscopy, and the aggregates showed a variety of morphologies. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1253–1266, 2002     

Thermogelling hydrogels of poly(ε-caprolactone-co-D,L-lactide)–poly(ethylene glycol)–poly(ε-caprolactone-co-D,L-lactide) and poly(ε-caprolactone-co-L-lactide)–poly(ethylene glycol)–poly(ε-caprolactone-co-L-lactide) aqueous solutions

Thermogelling poly(ε-caprolactone-co-D,L -lactide)–poly(ethylene glycol)–poly(ε-caprolactone-co-D,L -lactide) and poly(ε-caprolactone-co-L -lactide)–poly(ethylene glycol)–poly(ε-caprolactone-co-L -lactide) triblock copolymers were synthesized through the ring-opening polymerization of ε-caprolactone and D,L -lactide or L -lactide in the presence of poly(ethylene glycol). The polymerization reaction was carried out in 1,3,5-trimethylbenzene with Sn(Oct)₂ as the catalyst at various temperatures, and the yields were about 96%. The molecular weights and polydispersities (M_w/M_n) by gel permeation chromatography were in the ranges of 5140–6750 and 1.35–1.45, respectively. The differential scanning calorimetry results showed that the melting temperatures of the poly(ε-caprolactone) components were between 30 and 40 °C. By the subtle tuning of the chemical compositions and microstructures of these triblock copolymers, the aqueous solutions underwent sol–gel transitions as the temperature increased, with the suitable lower critical solution temperature in the range of 17–28 °C at different concentrations. Transesterification in the polymerization process generated the redistribution of sequences, which remarkably affected the sol–gel transition temperature. The amphiphilic copolymers formed micelles in aqueous solutions with a diameter of 62 nm and a critical micelle concentration of about 0.032 wt % at 20 °C. Micelles aggregated as the temperature increased, leading to gel formation. The sol–gel transition was studied, with a focus on the structure–property relationship. It is expected to have potential applications in drug delivery and tissue engineering. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4091–4099, 2007     

Synthesis of gradient copolymers with complexing groups by RAFT polymerization and their solubility in supercritical CO2

We report the synthesis of new gradient fluorinated copolymers with complexing groups and soluble in supercritical carbon dioxide (scCO₂). Poly(1,1,2,2‐tetrahydroperfluorodecyl acrylate‐co‐acetoacetoxyethyl methacrylate) (poly(FDA‐co‐AAEM)) and poly(1,1,2,2‐tetrahydroperfluorodecyl acrylate‐co‐vinylbenzylphosphonic acid diethylester) (poly(FDA‐co‐VBPDE)) gradient copolymers were synthesized by reversible addition fragmentation chain transfer polymerization in α,α,α‐trifluorotoluene. Poly(1,1,2,2‐tetrahydroperfluorodecyl acrylate‐co‐vinylbenzylphosphonic diacid) (poly(FDA‐co‐VBPDA)) gradient copolymer was efficiently obtained by cleavage of the phosphonic ester groups of poly(FDA‐co‐VBPDE). The cloud points of these gradient copolymers in dense CO₂ were measured in a variable volume view cell at temperatures between 25 and 65 °C. The gradient copolymers show very good solubility in compressed CO₂ with the decreasing order: poly(FDA‐co‐AAEM) ≈ poly(FDA‐co‐VBPDE) > poly(FDA‐co‐VBPDA). Following a green chemistry strategy, poly(FDA‐co‐AAEM) gradient copolymer was successfully synthesized in scCO₂ with a good control over number‐average molecular weight and composition. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5448–5460, 2009     

SYNTHESIS OF POLY(METHYL METHACRYLATE)-SILICA NANO-COMPOSITE

ABSTRACT

Transparent organic/pre-ceramic composite films of poly(methyl methacrylate) [PMMA] and perhydropolysilazane [PHPS] were synthesized by blending poly(methyl methacrylate-co-2-hydroxyethyl methacrylate) [P(MMA-co-HEMA)] random copolymers and PHPS. In the blend films, P(MMA-graft-PHPS) graft copolymers were formed, PMMA and PHPS were microscopically phase-separated in the solid state. Morphology of the microphase separation was investigated by transmission electron microscopy by changing HEMA content of the random copolymers and blend ratio of PHPS to HEMA. To convert PHPS to silica glass, the blend films were calcinated at 100°C. The morphology of the microphase separation of the films was not changed by the calcinations; the calcinated films were transparent. When the molar content of HEMA of P(MMA-co-HEMA) and the molar content of PHPS to HEMA in feed were 14.5% and 150%, respectively, the morphology was well ordered lamellae of PMMA and silica.     

Synthesis of graft copolymers by combination of radical photopolymerization and iniferter process

Various PS‐based graft copolymers including polystyrene‐graft‐poly(methyl methacrylate) and poly(styrene‐graft‐poly(ethylene glycol) methacrylate) are prepared via subsequent visible light radical photopolymerization and iniferter processes. Thus, poly(styrene‐co‐4‐chloromethylstyrene) P(S‐co‐VBC) is synthesized by light induced free‐radical polymerization. Then, chloride moieties are substituted with triphenylmethyl (trityl) groups to give trityl‐substituted PS (PS‐trityl) under visible light irradiation using dimanganese decacarbonyl (Mn₂(CO)₁₀) photochemistry. Side chains are then grafted from PS‐trityl backbone via iniferter process to give desired graft copolymers in a controlled manner. The precursor intermediates and the final graft copolymers are analyzed by ¹H NMR, FT‐IR, and GPC measurements. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1344–1348     

Poly(L‐glutamic acid) grafted with oligo(2‐(2‐(2‐methoxyethoxy)ethoxy)ethyl methacrylate): Thermal phase transition,secondary structure,and self‐assembly

Thermoresponsive and pH‐responsive graft copolymers, poly(L ‐glutamate)‐g‐oligo(2‐(2‐(2‐methoxyethoxy)ethoxy)ethyl methacrylate) and poly(L ‐glutamic acid‐co‐(L ‐glutamate‐g‐oligo(2‐(2‐(2‐methoxyethoxy)ethoxy)ethyl methacrylate))), were synthesized by ring‐opening polymerization (ROP) of N‐carboxyanhydride (NCA) monomers and subsequent atom transfer radical polymerization of 2‐(2‐(2‐methoxyethoxy)ethoxy)ethyl methacrylate. The thermoresponsiveness of graft copolymers could be tuned by the molecular weight of oligo(2‐(2‐(2‐methoxyethoxy)ethoxy)ethyl methacrylate) (OMEO₃MA), composition of poly(L ‐glutamic acid) (PLGA) backbone and pH of the aqueous solution. The α‐helical contents of graft copolymers could be influenced by OMEO₃MA length and pH of the aqueous solution. In addition, the graft copolymers exhibited tunable self‐assembly behavior. The hydrodynamic radius (R_h) and critical micellization concentration values of micelles were relevant to the length of OMEO₃MA and the composition of biodegradable PLGA backbone. The R_h could also be adjusted by the temperature and pH values. Lastly, in vitro methyl thiazolyl tetrazolium (MTT) assay revealed that the graft copolymers were biocompatible to HeLa cells. Therefore, with good biocompatibility, well‐defined secondary structure, and mono‐, dual‐responsiveness, these graft copolymers are promising stimuli‐responsive materials for biomedical applications. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Complex,degradable polyester materials via ketoxime ether‐based functionalization: Amphiphilic,multifunctional graft copolymers and their resulting solution‐state aggregates

Degradable, amphiphilic graft copolymers of poly(ε‐caprolactone)‐graft‐poly(ethylene oxide), PCL‐g‐PEO, were synthesized via a grafting onto strategy taking advantage of the ketones presented along the backbone of the statistical copolymer poly(ε‐caprolactone)‐co‐(2‐oxepane‐1,5‐dione), (PCL‐co‐OPD). Through the formation of stable ketoxime ether linkages, 3 kDa PEO grafts and p‐methoxybenzyl side chains were incorporated onto the polyester backbone with a high degree of fidelity and efficiency, as verified by NMR spectroscopies and GPC analysis (90% grafting efficiency in some cases). The resulting block graft copolymers displayed significant thermal differences, specifically a depression in the observed melting transition temperature, T_m, in comparison with the parent PCL and PEO polymers. These amphiphilic block graft copolymers undergo self‐assembly in aqueous solution with the P(CL‐co‐OPD‐co‐(OPD‐g‐PEO)) polymer forming spherical micelles and a P(CL‐co‐OPD‐co‐(OPD‐g‐PEO)‐co‐(OPD‐g‐pMeOBn)) forming cylindrical or rod‐like micelles, as observed by transmission electron microscopy and atomic force microscopy. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3553–3563, 2010