Endcapping of high performance liquid chromatography packings derived from silica gel

The effect of endcapping a reversed phase chromatographic packing material derived from silica gel depends on the degree of derivatization of the phase. The effect can be dramatic for phases with low loading. Whether an octadecylated silica gel has been endcapped or not can be ascertained by chromatographing the pair naphthalene/1-nitronaphthalene with a water/methanol eluent producing at least k' ≈ 10 for naphthalene. The ratio of the two k' values is 1.4 or higher for an endcapped material, while it is only 1.1 -1.2 for a non-endcapped phase. A similar approach fails to give conclusions of similar utility for octylated silica gels.     

High-performance liquid chromatography of proteins using chemically-modified silica supports

Summary Highly efficient and fast exclusion-chromatographic separations of proteins are possible on chemically-modified, silica stationary phases. By optimizing the pH and the ionic strength of the aqueous eluent secondary interactions of the samples with surface groups can be excluded. Bonded propylamide groups proved to possess optimum properties for exclusion chromatography. With other functional groups adsorption effects cannot be excluded totally. The optimum pore size distribution for protein separation up to relative molecular masses of 500,000 daltnons is between 10nm and 50nm. With these silica-based phases the pore size distribution, the pore volume and the packing characteristics are independent of the eluent, therefore the same column can be used with aqueous as well with organic eluents. It is possible to correlate the elution volume (molecular size) of proteins with those of polystyrene standars. The recovery of the proteins and their biological activity has always been better than 90%. The potentialities of adsorption chromatography of proteins on chemically-bonded stationary plases with different functional groups are demonstrated.     

Study of silica gel and copper silicate gel solubilities in high performance liquid chromatography

Summary After summarizing published results on silica gel and alkyl-bonded silica gel solubilities, the experimental solubility of unmodified silica and copper silicate gel (used in ligand exchange chromatography) in watermethanol-ammonia and water-acetonitrile-ammonia mixtures are given. These results demonstrate that silica gel solubility, measured by a static method, varies greatly with the water volume fraction of a ternary mixture. Curiously, no influence from the organic nature of the solvent was demonstrated. This observation is inconsistent with the fact that the copper silicate gel used in ligand-exchange chromatography with water-methanol-ammonia as mobile phase is attacked more rapidly than with water-acetonitrile-ammonia.An explanation based upon the variations of acid-base properties of silicic acid versus mobile phase dielectric constant values in conjunction with the methanol protophilic properties is proposed. Finally, it is shown that chromatographic columns filled with copper silicate gel have lifetimes of several months, if they are used with a procolumn (of copper silicate gel) and with acetonitrile as organic solvent with a volume fraction greater than 0.5 in the mobile phase.     

The analysis of organic mercury compounds using liquid chromatography with on-line atomic fluorescence spectrometric detection

A new method for the analysis of organic mercury compounds is reported. The organomercurials are separated by high-performance liquid chromatography (HPLC). The compounds are converted to mercury(0) in a continuous-flow system by means of an oxidizing and a subsequent reducing solution. The elemental mercury generated is swept into the cell of an atomic fluorescence spectrometer (AFS) by a stream of argon. The compositions of the oxidizing solution, which contains peroxodisulphate and copper(II) in dilute sulphuric acid, and the reducing solution, which contains alkaline tin(II) chloride, were optimized, as were the gas–liquid separator (GLS), the condensing system and the geometry of the reaction coils. The method is applied to extracts of certified reference material (CRM) and to river sediments. High concentrations of methylmercury were found in the sediment samples. At one location, the presence of ethylmercury is derived from the sample chromatogram.     

Study of qualitative analysis by liquid chromatography using porous polymer gel

Summary The possibility of qualitative analysis by liquid chromatography is discussed in systems of polystyrene gel or chemically bonded octadecyl packing with alcohols as standard compounds. Rekker's hydrophobic fragmental constants are used for identification purposes. Capacity ratios for alcohols can be calculated from the hydrophobicities in spite of changes in solvent mixture ratios if the capacity ratio for an internal standard compound is measured.     

Simultaneous determination of zirconium and hafnium as ternary complexes with 5-Br-PADAP and fluoride using solid-phase extraction and reversed-phase liquid chromatography

Solid-phase extraction (SPE) along with reversed-phase liquid chromatography (RP-LC) was used for the simultaneous determination of Zr(IV) and Hf(IV) by means of their ternary chelates with fluoride and 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (5-Br-PADAP). The conditions of SPE sorption were examined in detail: type of SPE column, volume of the sample, volume of the eluent, concentrations of metal ions, fluoride salt, chromogenic reagent, organic phase, and pH. It was established that the sorption of Zr(IV) and Hf(IV), as their ternary chelates, on SPE Zorbax SPE C18 (EC) cartridge was the most efficient, when the sample containing metal ion (Zr(IV), Hf(IV), both, up to 2 μg), 5-Br-PADAP 1.5×10⁻⁴, NaF 7.5×10⁻⁵ mol l⁻¹, methanol 40%, pH 4.5±1 was applied for the SPE sorption. The chelates were discarded from SPE cartridge using acetonitrile/water (99.75+0.25, v/v) eluent containing 3.8×10⁻⁴ mol l⁻¹ sodium fluoride and subsequently separated by RP-LC method. The RP-LC separation of both chelates was optimized and Zorbax SB-C18 analytical LC column along with acetonitrile/water (65+35, v/v) eluent containing the 1.5×10⁻⁴ mol l⁻¹ sodium fluoride was used. The established SPE/LC conditions allow Zr(IV) 0.08-2.0 μg and Hf(IV) 0.04-2.0 μg determination in a sample volume up to 150 ml. The detection limits, 0.03 μg Hf(IV) and 0.05 μg Zr(IV), were obtained. Recoveries, (94±2)% for Hf(IV) chelate and (106±2)% for Zr(IV) chelate were obtained, when 1 μg of Zr(IV) and Hf(IV) ions were determined by the present SPE/LC method from the sample volume of 100 ml. The established, pre-concentration SPE conditions, along with the LC separation and determination allow the assay of Zr(IV) and Hf(IV) in complicated matrix materials. The present SPE/LC method was applied to the determination of Zr(IV) and Hf(IV) in tap water and reference geological material (rock, NCS DC 73303; certified content: Zr, 27.7×10⁻³% (w/w) and Hf, 6.5×10⁻⁴% (w/w)).     

Phenylcarbamate derivatives of cellulose and amylose immobilized onto silica gel as chiral stationary phases for high-performance liquid chromatography

Three polysaccharide phenylcarbamate derivatives [cellulose 2,3-bis(3,5-dimethylphenylcarbamate)-6-(3,5-dimethylphenylcarbamate)/(2-methacryloyloxyethylcarbamate), cellulose 2,3-bis(3,5-dichlorophenylcarbamate)-6-(3,5-dichlorophenylcarbamate)/(2-methacryloyloxyethylcarbamate), and amylose 2,3-bis(3, 5-dimethylphenylcarbamate)-6-(3,5-dimethylphenylcarbamate)/(2-methacryloyloxyethylcarbamate)] with vinyl groups were prepared and coated onto silica gel to immobilize them via radical copolymerization with 2,3-dimethylbutadiene. The copolymerization efficiently proceeded, and the coated polysaccharide derivatives were mostly immobilized on the surface of the silica gel. The immobilized polysaccharide derivatives showed high chiral recognition abilities similar to those of the corresponding coated polysaccharide derivatives. They could be used with an eluent containing chloroform, which dissolved the polysaccharide derivatives. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4704–4710, 2004     

High-performance liquid chromatography of sugars on copper (II) modified silica gel

Summary A sensitive method of sugar analysis by HPLC is described in which a copper (II) modified silica gel as stationary phase is used. Detection is based on UV absorption of a complex formed between the sugar, copper, and ammonia.     

Evaluation of dead time calculation in liquid chromatography using a linearization procedure for homologous series

A mathematical method for the calculation of the dead time (t_m) in HPLC was evaluated using a computer simulation approach, in which artificial perturbations were introduced to Simulated homolog retention times. The calculation was based on a modified and extended Grobler and Bálisz (GB) method. Investigated wav how the precision of the calculated t_M is affected by: statistical fluctuations in retention times and which, and how many homolog retention times are used. Based on these simulations a two-step procedure for the t_M calculation is proposed: In the first step the linearity of log t_{R, n} vs carbon number n is checked using as many homolog retention times as possible. The slope value b^o of the first linear regression in the GB method is used for the selection of homolog retention times in the final t_M calculation. In the second step the optimal selection of homologs is made and the final t_M calculation is carried out. Guidelines for homolog selection are given.     

Separation of enantiomers by high performance liquid chromatography using chiral eluents

Simple procedures are presented for separating the enantiomers of α-methyldopa, 5-hydroxytryptophan, tryptophan, triiodothyronine and thyroxine, which require neither special sorbents nor difficult-to-obtain or unstable reagents. The method for α-methyldopa, 5-hydroxytryptophan and tryptophan is based on the use of L-phenylalanine copper complex as the chiral constituent of the mobile phase; LiChrosorb® RP-18 serves as the stationary phase. The procedure for triiodothyronine and thyroxine is grounded on the L-proline copper complex as the chiral reagent and LiChrosorb® Si 60 as the stationary phase. In all observed cases, the D-enantiomer is eluted prior to the respective L-enantiomer. Chirality inversion of the mobile phase (application of the D-phenylalanine copper complex) reverses the order of elution; a racemic eluent (DL-phenylalanine copper complex) leads to no separation. In addition to the enantiomers of α-amino acids, the enantiomers of α-hydroxy acids (mandelic acid) can be separated.     

A simple terminator for high efficiency liquid chromatography columns

A comparison is made between a flat bottom column terminator and a cone terminator on. 1.27 cm O.D. and 2.54 cm O.D. columns. The cone terminator results in a doubling of the column efficiency, is simple and inexpensive, and is universally adaptable to any diameter column.     

Aminolysis of 2-Aryl-5-R-5,6-dihydro-7H-[1,2,4]triazolo[5,1-<Emphasis Type="Italic">b</Emphasis>]1,3]thiazin-7-ones

We have established that the products of aminolysis of 2-aryl-5-R-5,6-dihydro-7H-[1,2,4]triazolo-[5,1-b][1,3]thiazin-7-ones in boiling ethanol are 3-R-3-(5-aryl-4H-1,2,4-triazol-3-ylsulfanyl)-propanamides, and at 180°C–210°C (depending on the structure of the substituent R): 3-phenyl-4,5-dihydro-1H-1,2,4-triazoline-5-thione and 3-arylacrylamides or 3-(3-aryl-5-thioxo-4,5-dihydro-1H-1,2,4-triazol-1-yl)propanamides. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1587–1592, October, 2005.     

模板法制备大孔硅胶微球及其在高效液相色谱蛋白质分离中的应用

以弱阳离子交换聚合物微球(WCX)为模板、N-三甲氧基硅基丙基-N,N,N-三甲基氯化铵(TMSPTMA)为结构导向剂、四乙氧基硅烷(TEOS)为硅胶前驱体,在三乙醇胺弱碱催化作用下,水解缩合形成有机聚合物与二氧化硅复合微球,将此复合微球煅烧后得到大孔二氧化硅微球。探索了不同反应条件对二氧化硅微球的形貌、表面结构和分散性的影响;当TMSPTMA、TEOS与三乙醇胺的体积比为1∶2∶2时可以得到孔径在50~150 nm之间、粒径在2μm左右的硅胶微球。对所制备的大孔硅胶微球表面进行C18(十八烷基二甲基氯硅烷)键合修饰,然后将键合的填料装填到50 mm×4.6 mm的色谱柱中,考察了其对常见的几种标准蛋白质和市售大豆分离蛋白质的分离效果,结果显示这种填料在高效液相色谱蛋白质分离中具有一定的潜力。     

高效液相色谱法测定铬超富集植物李氏禾根系分泌物中的有机酸

建立了高效液相色谱（HPLC）测定Cr超富集植物李氏禾根系分泌物中低相对分子质量有机酸的分析方法。采用XSelect HSS T3色谱柱（250 mm×4.6 mm,5 μm,Waters）,以40 mmol/L磷酸二氢钾-磷酸缓冲溶液（pH=2.40）作流动相,流速1.0 mL/min,柱温25℃,在波长205 nm处检测。该方法在13 min内简便快速地分离出8种有机酸（草酸、酒石酸、苹果酸、乳酸、甲酸、乙酸、马来酸和柠檬酸）,且峰形良好。有机酸的检出限（LOD）为0.12~12.32 mg/L;草酸的加标回收率为73.15%,其他有机酸的加标回收率为94.54%~109.98%。李氏禾的根系分泌物中各有机酸含量分别为酒石酸（130.90±1.44）μg/g（根干重）、苹果酸（1031.34±4.38）μg/g（根干重）、乳酸（65.54±1.01）μg/g（根干重）、马来酸（0.96000±0.00367）μg/g（根干重）和柠檬酸（201.50±1.13）μg/g（根干重）。该方法简便快速,灵敏可靠,适用于植物根系分泌物样品中有机酸的测定。     

大黄素键合硅胶高效液相色谱柱的制备和应用

采用中间体法,先将大黄素配体与γ-[（2,3）-环氧丙氧]丙基三甲氧基硅烷（KH-560）偶联剂反应制备含配体的硅氧烷试剂,然后再与硅胶键合,最终制得大黄素键合硅胶液相色谱固定相（以下简称ESP）。通过红外光谱、元素分析和热重分析表征固定相的结构。以萘作为溶质探针,甲醇-水（60：40,v/v）为流动相,流速为0.8 mL/min,测得ESP柱的柱效。采用传统的反相C₁₈和苯基柱作参比,将ESP应用于系列中性、碱性和酸性芳香族化合物以及实际样品风油精的分离分析,并探讨相关的色谱分离机理。结果表明,配体大黄素被成功地键合到球形硅胶表面,测得配体键合量为0.23 mmol/g,ESP柱理论塔板数约为19874 N/m。ESP的偶联剂链和蒽醌环提供了疏水性的结构基础,大黄素配体还能为溶质提供π-π或p-π、电荷转移、氢键、偶极-偶极等作用点。多位点的协同作用使得ESP柱具有独特和优秀的色谱分离选择性,并且无需调节pH值,采用简单而廉价的甲醇-水流动相就能实现胺类、酚类等极性样品的基线分离,实验条件简单、方便。