Monitoring gold nanorod synthesis by localized surface plasmon resonance

Surfactants can direct the growth of gold nanoparticles to create anisotropic structures in high yield by simple means, yet the exact roles of surfactants and other reactants are not entirely understood. Here we show that one can exploit the geometrical dependence of the localized surface plasmon resonant extinction spectrum of gold nanorods to monitor their synthesis kinetics. By using quantitative measurements of nanorod extinction cross sections, Gans' theory for the spectral extinction of prolate spheroids can be normalized to provide values for the nanorod length and diameter from extinction spectra measured during growth. The nanorod length growth rate was first observed at 0.15 nm/s and decayed during the growth reaction. The rate dependence on nanorod size did not correspond to any simple reaction-limited or diffusion-limited growth mechanisms.     

Determination of DNA based on localized surface plasmon resonance light scattering using unmodified gold bipyramids

The DNA was determined based on resonance light scattering (RLS) spectrometry and the localized surface plasmon resonance. The gold bipyramids were used as the probes and synthesized by a seed-mediated method. Cetyltrimethylammonium bromide was used as stabilizing agent. DNA can be bound to the gold bipyramids due to electrostatic interaction and aggregates, which results in a strong enhancement of the RLS intensity. Under the optimal conditions, the intensity of RLS is directly proportional to the concentration of DNA in the range from 0.1 to 2.0 μg mL(-1).     

Silica-stabilized gold island films for transmission localized surface plasmon sensing

Ultrathin gold films prepared by evaporation of sub-percolation layers (typically up to 10 nm nominal thickness) onto transparent substrates form arrays of well-defined metal islands. Such films display a characteristic surface plasmon (SP) absorption band, conveniently measured by transmission spectroscopy. The SP band intensity and position are sensitive to the film morphology (island shape and inter-island separation) and the effective dielectric constant of the surrounding medium. The latter has been exploited for chemical and biological sensing in the transmission localized surface plasmon resonance (T-LSPR) mode. A major concern in the development of T-LSPR sensors based on Au island films is instability, manifested as change in the SP absorbance following immersion in organic solvents and aqueous solutions. The latter may present a problem in the use of Au island-based transducers for biological sensing, usually carried out in aqueous media. Here, we describe a facile method for stabilizing Au island films while maintaining a high sensitivity of the SP absorbance to analyte binding. Stabilization is achieved by coating the Au islands with an ultrathin silica layer, ca. 1.5 nm thick, deposited by a sol-gel procedure on an intermediate mercaptosilane monolayer. The silica coating is prepared using a modified literature procedure, where a change in the reaction conditions from room temperature to 90 degrees C shortened the deposition time from days to hours. The system was characterized by UV-vis spectroscopy, ellipsometry, XPS, HRSEM, AFM, and cyclic voltammetry. The ultrathin silica coating stabilizes the optical properties of the Au island films toward immersion in water, phosphate buffer saline (PBS), and various organic solvents, thus providing proper conditions where the optical response is sensitive only to changes in the effective dielectric constant of the immediate environment. The silica layer is thin enough to afford high T-LSPR sensitivity, while the hydroxyl groups on its surface enable chemical modification for binding of receptor molecules. The use of silica-encapsulated Au island films as a stable and effective platform for T-LSPR sensing is demonstrated.     

Measurement of antibody binding to protein immobilized on gold nanoparticles by localized surface plasmon spectroscopy

Antibody binding to bovine serum albumin (BSA) and human serum albumin (HSA) immobilized onto gold nanoparticles was studied by means of localized surface plasmon resonance (LSPR) spectroscopy. Amine-modified glass was prepared by self-assembly of amine-terminated silane on substrate, and gold (Au) nanoparticles were deposited on the amine-modified glass substrate. Au nanoparticles deposited on the glass surface were functionalized by BSA and HSA. BSA immobilization was confirmed by LSPR spectroscopy in conjunction with surface-enhanced Raman scattering spectroscopy. Then, LSPR response attributable to the binding of anti-BSA and anti-HSA to BSA- and HSA-functionalized Au nanoparticles, respectively, was examined. Anti-HSA at levels larger than ∼10 nM could be detected by HSA-immobilized chips with LSPR optical response, which was saturated at concentrations greater than ∼650 nM of anti-HSA. Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible to authorized users.     

A novel C-shaped, gold nanoparticle coated, embedded polymer waveguide for localized surface plasmon resonance based detection

In this study, a novel embedded optical waveguide based sensor which utilizes localized surface plasmon resonance of gold nanoparticles coated on a C-shaped polymer waveguide is being reported. The sensor, as designed, can be used as an analysis chip for detection of minor variations in the refractive index of its microenvironment, which makes it suitable for wide scale use as an affinity biosensor. The C-shaped waveguide coupled with microfluidic channel was fabricated by single step patterning of SU8 on an oxidized silicon wafer. The absorbance due to the localized surface plasmon resonance (LSPR) of SU8 waveguide bound gold nano particle (GNP) was found to be linear with refractive index changes between 1.33 and 1.37. A GNP coated C-bent waveguide of 200 μ width with a bend radius of 1 mm gave rise to a sensitivity of ~5 ΔA/RIU at 530 nm as compared to the ~2.5 ΔA/RIU (refractive index units) of the same dimension bare C-bend SU8 waveguide. The resolution of the sensor probe was ~2 × 10(-4) RIU.     

Multipolar surface plasmon peaks on gold nanotriangles

In this paper, we report on the observation of multipolar surface plasmon excitation in lithographically designed gold nanotriangles, investigated by means of far-field extinction microspectroscopy in the wavelength range of 400-1000 nm. Several bands are observed in the visible and near infrared regions when increasing the side length of the triangles. The assignment of these peaks to successive in-plane multipolar plasmon modes is supported by calculations using the discrete dipole approximation method. We show that the lowest three multipolar excitations are clearly resolved in the visible and near infrared range. These new spectral features could be very promising in nanooptics or for chemosensing and biosensing applications.     

A spherical harmonic transform spectral analysis of a localized surface plasmon on a gold nano shell

We perform a study of the localized surface plasmon (LSP) modes of a gold nano shell having a silica core by means of discrete dipole approximation (DDA) and spherical harmonics transform for selected wavelengths. We demonstrate an efficient solution for the near and intermediate field terms by the dyadic Green function approach and determine the optical extinction efficiency by the far field term. Using this approach, we combine the advantages of a spectral analysis along with a DDA flexibility to solve an arbitrary shaped model and demonstrate the LSP dominant mode wavelength dependency. Our approach provides a metric which may be used to quantify the effects of minor changes in the model structure, or the external dielectric environment, in optical experiments. © 2014 Wiley Periodicals, Inc.     

High-sensitivity biosensors fabricated by tailoring the localized surface plasmon resonance property of core-shell gold nanorods

An enhanced sensitive biosensor has been developed to detect biological targets by tailoring the localized surface plasmon resonance property of core–shell gold nanorods. In this new concept, a shell layer is produced on gold nanorods by generating a layer of chalcogenide on the gold nanorod surface after attachment of the recognition reagent, namely, goat IgG and antigen of schistosomiasis japonica. The bioactivity of these attached biomolecules is retained and the sensitivity of this biosensor is thus enhanced significantly. The plasmonic properties of the gold nanorods attached with the biomolecules can be adjusted and the plasmon resonance wavelength can be red-shifted up to several hundred nanometers in the visible or near infrared (NIR) region, which is extremely important to biosensing applications. This leads to a lager red-shift in the localized surface plasmon resonance absorption compared to the original gold nanorod-based sensor and hence offers greatly enhanced sensitivity in the detection of schistosomiasis japonica. The human serum infected with schistosomiasis japonica diluted to 1:50,000 (volume ratio, serum/buffer solution) can be detected readily. The technique offers enhanced sensitivity and can be easily extended to other sensing applications based on not only immuno-recognition but also other types of specific reactions.     

Nanoscale actuation of thermoreversible polymer brushes coupled with localized surface plasmon resonance of gold nanoparticles

This paper describes the fabrication of hybrid nanoassemblies with polymer brushes and gold nanoparticles enabling detection of nanoscale optical changes based on localized surface plasmon resonance. The reversible and thermosensitive nanoscale actuation is achieved by combining stimuli-responsive polymer brushes and gold nanoparticles independently and selectively assembled on substrates. These hybrid nanoassemblies are assembled on numerous substrates and will be applicable for optoelectronics, nanoactuator, and nanosensor applications.     

Synthesis of gold/polydopamine composite surfaces on glass substrates for localized surface plasmon resonance and catalysis

Composite materials of polydopamine (PDA) and gold nanoparticles on glass substrates (Au/PDA@slide) were obtained via a simple chemical process. First, PDA films (PDA@slide) were formed by immersing slides in 20 mg ml⁻¹ dopamine aqueous solution at pH = 8.5 for 1 h. Then, PDA@slide was dipped in 0.02 M chloroauric acid (HAuCl₄) aqueous solution for a certain time, Au/PDA@slide being formed. Gold nanoparticles were obtained by the reductive properties of PDA. The morphology and chemical composition of the composite material were characterized using scanning electron microscopy, X‐ray diffraction and X‐ray photoelectron spectroscopy. The catalytic properties of Au/PDA@slide were evaluated using the reduction of 4‐nitrophenol (4‐NP) in the presence of sodium borohydride (NaBH₄) aqueous solution at room temperature. The catalytic activity of the optimal Au/PDA@slide was so satisfactory that the reduction of 4‐NP was completed within 10 min. Moreover, the Au/PDA@slide composite material was stable up to five cycles without significant loss of its catalytic activity. In addition, Au/PDA@slide also exhibited photocatalytic ability, photodegrading 2.5 ml of 17.5 mg l⁻¹ methyl orange in 100 min. By measuring the UV–visible absorption bands of Au/PDA@slide, it was proved that the condition of the strongest surface plasmon resonance of Au/PDA@slide was the optimal condition for catalytic reduction of 4‐NP.     

Nonlinear optical detection of proteins based on localized surface plasmons in surface immobilized gold nanospheres

A new nonlinear optical method is presented to detect proteins binding to a gold surface without using fluorescent-dye labeling. After exposure of the protein-binding surface to a gold nanosphere solution, the nanospheres are immobilized above a gold surface with a nanogap supported by the protein. The gold nanospheres immobilized on the gold surface show strong localized surface plasmon (LSP) resonance, and the formation of this structure results in a marked increase in the optical second harmonic (SH) activity of the gold surface arising from a large enhancement of the electric field localized adjacent to the nanospheres on the LSP resonance. The SH image, therefore, gives a high contrast ratio, 7.0:1, of protein-binding spots to control spots. The contrast ratio is much greater than those obtained by linear reflectivity imaging.     

Tunable localized surface plasmon resonances in tungsten oxide nanocrystals

Transition-metal oxide nanocrystals are interesting candidates for localized surface plasmon resonance hosts because they exhibit fascinating properties arising from the unique character of their outer-d valence electrons. WO(3-δ) nanoparticles are known to have intense visible and near-IR absorption, but the origin of the optical absorption has remained unclear. Here we demonstrate that metallic phases of WO(3-δ) nanoparticles exhibit a strong and tunable localized surface plasmon resonance, which opens up the possibility of rationally designing plasmonic tungsten oxide nanoparticles for light harvesting, bioimaging, and sensing.     

Waveguide surface plasmon resonance studies of surface reactions on gold electrodes

We describe the fabrication and characterisation of gold-coated graded index channel waveguide sensors designed for simultaneous electrochemical and surface plasmon resonance studies. The active sensing electrode area is a thin gold film between 0.5 and 5 mm in length and 200 microm wide deposited on top of a 3 microm wide waveguide which forms one arm of a Y-junction while the other arm of the Y-junction serves as a reference. Using these devices we have measured simultaneously the changes in transmittance through the device whilst carrying out cyclic voltammetry in either sulfuric or perchloric acid solution or during the deposition of an UPD layer of copper at the gold surface. In all cases we obtain stable and reproducible results which demonstrate the very high sensitivity of the devices to sub-monolayer changes occurring at the gold electrode surface. The response of these integrated optoelectrochemical devices is discussed in terms of a numerical model for the propagation of light within the waveguide structure.     

Ultrafast dephasing time of localized surface plasmon polariton resonance and the involved damping mechanisms in colloidal gold nanoparticles

In this contribution, for the first time precise in situ measurements of the ultrafast dephasing time T₂ of localized surface plasmon polariton resonances in colloidal gold nanoparticles with the objective to identify the involved damping mechanisms are presented. T₂ is an essential parameter that does not only allow one to determine the field enhancement factor that is of great importance for many applications of nanoparticles, but also reflects the role of different dephasing mechanisms. The most essential result is the observation of a chemical interface damping which causes a dramatic shortening of the dephasing time. While T_2∞ = 9.4 fs can be obtained from the bulk dielectric function, the value shrinks to 3.7 fs if the nanoparticles are in aqueous solution.     

A study of electrolytic coagulation of gold sols by the method of localized surface plasmon resonance spectroscopy

Surface plasmon resonance spectroscopy has been employed to study the aggregation of gold sols with average nanoparticle sizes of 15–35 nm under the action of an indifferent electrolyte (NaCl). The structure of resulting aggregates has been established as depending on the coagulation regime. In the regime of fast coagulation, anisotropic aggregates with branched structure are initially formed; then, they are transformed into denser aggregates with a lower degree of anisotropy. The change of the aggregate structure accelerates with an increase in hydrosol concentration. At the same time, slow coagulation obviously yields denser aggregates, the structure of which is independent of the sol concentration and particle size. A procedure has been proposed for estimating the critical coagulation concentration of gold hydrosols based on the analysis of variations in their extinction. It has been found that the critical coagulation concentration increases with a reduction in the sol concentration and gold nanoparticle size.     

Amplification of localized surface plasmon resonance signals by a gold nanorod assembly and ultra-sensitive detection of mercury

Controlled assembly of gold nanorods induced by Na(3)PO(4) leads to a significant amplification of localized surface plasmon resonance (LSPR) signals. The strong affinity between Au and Hg alters the coupled LSPR signals due to the amalgamation of Hg and Au. This allows detection of Hg in aqueous solutions with ultra-high sensitivity and excellent selectivity, without sample pretreatment.     

Nanostructured materials with localized surface plasmon resonance for photocatalysis

Localized surface plasmon resonance（LSPR） enhanced photocatalysis has fascinated much interest and considerable efforts have been devoted toward the development of plasmonic photocatalysts.In the past decades,noble metal nanoparticles（Au and Ag） with LSPR feature have found wide applications in solar energy conversion.Numerous metal-based photocatalysts have been proposed including metal/semiconductor heterostructures and plasmonic bimetallic or multimetallic nanostructures.However,high cost and...