聚乳酸-聚乙二醇单甲醚共混体系的调制DSC分析

采用调制差示扫描量热法(MDSC)研究了聚乳酸(PLA)与聚乙二醇单甲醚(MPEG)共混体系的热性能。研究结果表明,MDSC可有效分辨PLA重结晶和熔融的重叠效应,在测试条件下,PLA的α’-α晶型转变与α晶体的熔融几乎同时进行。随着升温速率的加快和调制周期的延长,当增塑剂的质量分数为15%时,PLA-MPEG共混物分割在不可逆曲线的重结晶焓逐渐升高(最高约28J/g),熔融焓逐渐降低(最低约为3.3J/g);分割在可逆曲线的熔融峰逐渐由多重峰变为单峰,且焓变值逐渐升高(最高约66.1J/g),相应的可逆曲线熔融分割比例达到了95.2%。通过提高升温速率和延长调制周期,可使大部分熔融分割在可逆曲线上,但过快的升温速率和过长的调制周期会导致PLA相转变时的周期数过少,DSC调制功能的分辨率下降,设置测试条件时需综合考虑。     

物理老化对聚乳酸玻璃化转变行为的影响

为考察不同链结构的聚乳酸在物理老化过程中聚集态结构的变化 ,分别在 0℃、2 5℃、37℃对聚 (D ,L 乳酸 ) (PDLLA)、非晶态的低左旋度聚 (L 丙交酯 ) (l PLLA)和左旋聚 (L 丙交酯 ) (PLLA)进行长达 6个月的物理老化 ,用温度调制式差示扫描量热法 (MDSC)研究了它们在物理老化过程中的玻璃化转变行为的变化 .结果表明 ,PDLLA和l PLLA对物理老化十分敏感 ,在一定老化温度下 ,它们的玻璃化转变温度 (Tg)随老化时间延长向高温移动 ,老化过程中产生的非可逆热焓 (ΔHnon)逐渐增加 ,这种趋势在老化 1w内变化明显 ,随后趋缓 ;而老化温度越高 ,Tg 升高和ΔHnon增加的速率都越快 .不同温度下老化 ,PDLLA和l PLLA的ΔHnon 与老化时间的对数都有较好的线性关系 ,ΔHnon的变化速率对温度的倒数作图 ,l PLLA的斜率绝对值比PDLLA的略大 ,说明有较高立构规整性的分子链形成物理缠结需要较高的活化能 .PLLA由于结晶度高而非晶相含量较低 ,未观察到明显的玻璃化转变及其在物理老化过程中的变化 .     

调制差示扫描量热法在高分子材料中的应用

调制差示扫描量热法(MDSC)是在传统线性变温基础上叠加一个正弦震荡温度程序,将总热流量分解为可逆热流(热容成分)和不可逆热流(动力学成分),同时具有较高的灵敏度和分辨率,在研究高分子材料复杂相变时具有独特的优势。近年来,MDSC在研究高分子材料的玻璃化转变、结晶-熔融、热容变化等领域得到了较为广泛的应用。本文对MDSC近年来在高分子材料中的最新研究应用做了详细介绍。     

物理老化对PEK-C、PES-C及其复合材料的玻璃化转变热焓松弛特征的影响

本文用DSC技术研究了物理老化对PEK-C、PES-C及其共混物和复合材料玻璃化转变的影响.老化时间(t)延长,玻璃化转变温度(T_g)、热焓松弛峰温(T_(max))、峰高(△C_(pmax))和热焓(△H)提高;△H与lgt成线性关系.碳黑或碳纤维对PES-C的物理老化行为无影响,而反应性乙炔端基砜(ATS)固化物能限制PEK-C和PES-C在T_g以下温度的物理老化过程.利用物理老化能更为方便地判断多相体系的相容性,结果表明PEK-C/PSF为相容体系,而PEK-C/PES-C相容性较差.     

调制差示扫描量热法研究玻璃化转变温度

对比了DSC与MDSC试验技术的差别， 列举了MDSC的优点，MDSC不但可以给出普通DSC的所有信息，而且给出更多的普通DSC无法提供的信息。MDSC特别适合于复杂转变、弱的转变分析，可以寻找出隐藏在熔融及结晶过程中的玻璃化转变。MDSC对于试验条件的选择比较苛刻，在选择好基本的试验参数的前提下，还需要设置调制周期、调制振幅等参数。     

物理老化对PEK-C、PES-C及其复合材料的玻璃化转变热焓松弛特征的影响

 本文用DSC技术研究了物理老化对PEK-C、PES-C及其共混物和复合材料玻璃化转变的影响.老化时间(t)延长,玻璃化转变温度(T_g)、热焓松弛峰温(T_max)、峰高(△C_pmax)和热焓(△H)提高;△H与lgt成线性关系.碳黑或碳纤维对PES-C的物理老化行为无影响,而反应性乙炔端基砜(ATS)固化物能限制PEK-C和PES-C在T_g以下温度的物理老化过程.利用物理老化能更为方便地判断多相体系的相容性,结果表明PEK-C/PSF为相容体系,而PEK-C/PES-C相容性较差.     

醋酸纤维素／聚乙烯基吡咯烷酮共混体系的相容性研究（Ⅰ）

用ＤＳＣ，ＤＭＴＡ研究了醋酸纤维素（ＣＤＡ），聚乙烯基吮咯烷酮（ＰＶＰ）及ＣＤＡ／ＰＶＰ共混体系的玻璃化转变行为．用精密量热法测定了该体系的混合热焓．结果表明：共混体系只存在一个玻璃化转变温度（Ｔｇ），其值随共混组成的变化而改变；共混体系的混合热焓为负值，其绝对值随组成中ＰＶＰ含量的增加而减少．力学性能研究表明，共混体系具有协同效应．上述试验结果证明，ＣＤＡ和ＰＶＰ是一对相容性高聚物．     

尼龙6与半芳香性非晶尼龙原位共混物的结构与性能

一种半芳香的非晶尼龙共聚物溶解于熔融的己内酰胺中,引发后者负离子开环聚合原位制备尼龙6与非晶尼龙的共混物.与纯尼龙6相比较,此原位共混物的强度与模量显著提高.非晶区呈现单一的玻璃化转变,表明共混物为均相体系,其组分的相容性源于负离子聚合过程中链交换反应引起的共聚.与纯尼龙6相比较,此共混物的熔点与结晶度显著降低.此外,与纯尼龙6只存在α晶不同,共混物中伴生有大量的γ晶.当非晶尼龙含量为20 wt%时,绝大部分晶体为γ晶.然而,共混物中球晶仅有一定程度细化.共混物强度和模量的提高被认为主要源于非晶区分子活动能力降低以及γ晶相对含量的提高.     

T_g以下温度退火对无规聚苯乙烯性能的影响

用调幅式ＤＳＣ等新技术研究了物理老化对无规聚苯乙烯多种性能的影响．随着老化时间的延长，试样的玻璃化转变温度、热焓松弛、峰温、峰高和热焓提高；老化使材料的初始模量，屈服应力和断裂强度都有不同程度的提高；使样品的溶剂扩散速率降低，但对样品的密度和声传播速度几乎没有影响．以上这些结果可从物理老化引起试样中凝聚缠结增加的观点来进行解释．     

聚乳酸/羧基化聚丙烯共混物的形态与热性能研究

以扫描电子显微镜、热重分析仪、差示扫描量热仪、热台偏光显微镜分别研究了聚乳酸/羧基化聚丙烯共混体系的相形态、热性能和结晶形态.结果显示,共混物熔体冷却时,聚乳酸和羧基化聚丙烯均形成球晶,但羧基化聚丙烯球晶较大而十字消光较暗,聚乳酸球晶尺寸较小而十字消光较亮,且聚乳酸球晶产生规则的、不连续的同心环线——裂纹,裂纹厚度约为1~2μm,且裂纹内部有微纤存在.当聚乳酸含量≤50%时,由于聚丙烯上羧基的存在而使共混体系具有较好的相容性.共混物的热分解过程分为三个阶段,热分解温度的变化是聚丙烯上的羧基、聚乳酸和聚丙烯骨架分解三种机制共同作用的结果,少量聚乳酸能够明显提高共混物中聚丙烯上羧基的热稳定性.共混物中的羧基化聚丙烯组分可以发挥稀释剂的作用,大幅度降低了聚乳酸的冷结晶温度.聚乳酸含量≥50%时,共混熔体降温时DSC谱图中聚乳酸和羧基化聚丙烯分别结晶,而聚乳酸含量<50%时,只观察到羧基化聚丙烯的结晶行为.     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

Summary of development of the theory of stability of colloids and thin films

In this review, the research of the author in the field of colloidal systems is summarized. The factors influencing colloidal stability are systematized and analyzed. Examples are presented to illustrate the practical utilization of the theory of stability of colloids and thin films.This review was prepared on the basis of the works of the author, which were awarded the State Premium for 1991 in the field of science and technology, chemistry section.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1708–1717, August, 1992.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Thermodynamics of the formation of oxosulfides of rare-earth elements

The enthalpies of solution of several oxosulfides of rare-earth elements and the high-temperature enthalpies of oxosulfides and oxosulfates of lanthanum and yttrium were measured using solution calorimetry and high-temperature microcalorimetry techniques. Standard enthalpies of formation and some thermodynamic properties of oxosulfides and oxosulfates were calculated. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2 pp. 294–297, February, 1997.     

恶臭嗅辨实验室建设探讨

针对恶臭测试的环境影响问题,提出了解决的实例方案,并对方案的要点及优缺点进行讨论,此方案在实际操作中具有较好的效果。