Structural study of PLGA [copoly (DL-lactic/glycolic acid)], a biodegradable polymer for parenteral sustained release preparations, by tandem mass spectrometry.

A copoly (DL-lactic/glycolic acid) (PLGA), with a weight-average molecular weight of about 8400, has been characterized using fast atom bombardment (FAB)-tandem mass spectrometry in order to determine the sequence. Because of the large molecular size, PLGA was partially hydrolyzed and the terminal hydroxyl groups in the resulting oligomer mixture acetylated as the indicator. The FAB spectrum of this sample showed a complex ion signal pattern containing monomer to octamer. Diagnostic product ions containing useful information for sequence determination were observed in collision-induced dissociation-MS/MS and MS/MS/MS of these oligomer ions. The results of analysis for dimers through pentamers showed that they have random sequences of lactic and glycolic acid, suggesting that the whole structure of PLGA also has a random sequence.     

Studies of structural alterations of humic acids from conifer bark residue during composting by pyrolysis-gas chromatography/mass spectrometry using tetramethylammonium hydroxide (TMAH-py-GC/MS)

Pyrolysis-gas chromatography/mass spectrometry using tetramethylammonium hydroxide (TMAH-py-GC/MS) was used to characterize the humic acids (HAs) produced during the composting of conifer bark. The syringyl to guaiacyl ratios of HAs during composting were estimated from the peak area ratios for 3,4,5-trimethoxy to 3,4-dimethoxy benzene derivatives (0.11–0.50), which are characteristic of conifer species. The peak areas for nitrogen-containing and fatty acid pyrolysate compounds increased significantly during composting, indicating the degree of humification during composting. HA samples from the bark composts contained higher levels of diterpene resin acids, monoterpenes and sesquiterpenes. To investigate the species of terpenes, the HA was extracted with ethanol, and the components of the extract classified into α-HA and hymatomelanic acid (HMA) fractions, respectively. The peak areas for terpenes in the α-HA fraction were much smaller than those in the original HA, indicating that the majority of terpenes were extracted into the HMA fraction. If terpenes were to bind to HMA via unspecified interactions, no peaks would be apparent for the direct injection of HMA in ethanol into the GC/MS without pyrolysis. A comparison of the total ion chromatograms of HMA for the TMAH-py-GC/MS and GC/MS revealed that terpenes in the HA had been incorporated into polymeric structures of HMA. These results indicate that terpenes are transferred from the raw bark and incorporated into HA fractions during the composting processes.     

Fish gut content analysis by thermochemolysis with tetramethylammonium hydroxide (TMAH) and gas chromatography–mass spectrometry (GC–MS)

Gut content analyses of fish are typically conducted using methods based on visual identification. These can lead to inconsistent results because of their subjective nature, especially when sample sizes are limited or food items are not resolvable. New approaches are required to increase the accuracy of gut content analysis. We investigate whether thermochemolysis with TMAH and GC–MS detection can qualitatively and quantitatively analyse the gut contents of two Monacanthid fishes fed seagrass, epiflora and epifauna under controlled conditions. The three food items could be readily differentiated when analysed individually, seagrass could be distinguished from epiphytes (epifauna + epiflora) in the gut, and quantitative data could be obtained using marker compounds unique to a food item. Thermochemolysis with TMAH and GC–MS represents a new technique for the gut content analysis of fish which can complement traditional techniques and be applied to samples that are very small (0.5–2 mg) and contain difficult to separate items.     

Structural analysis of lignin in chestnut wood by pyrolysis-gas chromatography/mass spectrometry

The goal of the study was to determine the percentage of lignin in chestnut wood and to characterize structurally this polymer by pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) according to a possible influence on ring shake defect. The sampling was performed in different sites of Lazio Region in Italy. Wood disks from trees with ring shake defect and without ring shake defect were selected and little amount of heartwood (1-2 g) sampled between 6th and 10th and between 11th and 15th annual growth ring were analyzed. The study allowed quantifying lignin content, which is in average 26% and syringyl/guaiacyl (S/G) ratio, which present an average value of 2.43. Belong the pyrolysis products of wood, the trees characterized by ring shake show a higher concentration of the phenol homosyringaldehyde respect to the healthy trees. There is not any evident difference in the products composition of pyrolysis in respect to trees’ age, especially the critical period of 12-14 years in which ring shake generally becomes more evident. The site of wood provenance is the higher factor of variability in the structure of lignin for many phenols.     

Differentiation of resin-modified paints by pyrolysis-gas chromatography/mass spectrometry and principal component analysis

The combination of pyrolysis (Py) with gas chromatography/mass spectrometry (GC/MS) is already well established for polymer analysis. A first approach is reported using this method for detailed quality monitoring of a complex technical polymer system. Six similar solvent-based paints (one standard and five modifications) have been used for evaluation. The major pyrolysis products were identified and qualitative and quantitative modifications were detected and specified. Principal component analysis (PCA) was applied for visualization of differences and similarities.     

The effect of afforestation on the soil organic carbon (SOC) of a peaty gley soil using on-line thermally assisted hydrolysis and methylation (THM) in the presence of 13C-labelled tetramethylammonium hydroxide (TMAH)

In Britain substantial areas of both deep and shallow peatland have been afforested with conifers since the 1950s. However, information about the effects of afforestation on the properties of soil organic carbon (SOC) is lacking. Investigating the geochemical changes that take place when lignin- and tannin-derived phenols are degraded and incorporated into SOC will provide us with an insight into soil carbon dynamics at the molecular level. Here we compare the phenolic distributions in two different peaty gley soil profiles using on-line thermally assisted hydrolysis and methylation (THM) in the presence of both unlabelled and ¹³C-labelled tetramethylammonium hydroxide (TMAH). The two soil profiles were beneath respectively an unforested moorland (ML) and a second rotation Sitka spruce (Picea sitchensis) afforested moorland (SS), from Harwood (Northumberland, northeast England, UK). THM of these soils in the presence of ¹³C-labelled TMAH enabled us to assess the relative contributions of lignin, demethylated lignin, and non-lignin phenolics. The lignin phenolic distributions differed in both soil profiles reflecting changing source and decay dynamics within and between the sites. A progressive degradation of syringyl (S) and guaiacyl (G) phenolics was observed in the ML soil, compared with an increase of such components in the organic/mineral horizons of the SS soil. A significant tannin input was observed, particularly in the upper horizons of the SS soil. The S/G ratio gradually decreased with increasing burial in the ML soil, whilst a change in vegetation input and land preparation was recorded by this ratio in the SS soil. Overall, this suggests that afforestation influences the phenolic compositional profiles in these peaty gley soils as a result of one or more of the following processes: changing vegetation input, horizon inversion prior to planting, root input or leaching. This highlights the potential of using lignin and tannins as molecular indicators to assess the effects of afforestation on SOC.     

Differentiation of resin-modified paints by pyrolysis-gas chromatography/mass spectrometry and principal component analysis

The combination of pyrolysis (Py) with gas chromatography/mass spectrometry (GC/MS) is already well established for polymer analysis. A first approach is reported using this method for detailed quality monitoring of a complex technical polymer system. Six similar solvent-based paints (one standard and five modifications) have been used for evaluation. The major pyrolysis products were identified and qualitative and quantitative modifications were detected and specified. Principal component analysis (PCA) was applied for visualization of differences and similarities.     

Synthesis of Rhus succedanea lacquer film and analysis by pyrolysis-gas chromatography/mass spectrometry

Laccol, a major component of lacquer sap from Rhus succedanea, was synthesized by a Witting reaction, and then mixed with acetone powder separated from raw lacquer sap to synthesize lacquer films. The resulting lacquer films were analyzed by pyrolysis gas chromatography/mass spectrometry (Py-GC/MS), and the results were compared with that of natural lacquer film to evaluate the polymerization mechanism and film structure. The results showed that saturated and monoenyl laccol components were present only in the natural lacquer film, but not in the synthesized lacquer films. Meanwhile, alkylphenols, alkebulphenols, alkanes, and alkenes having longer carbon chains than the side chains were detected in the synthesized laccol, suggesting that the polymerization of synthetic laccol proceeds through the laccase-catalyzed nucleus-side chain CO coupling and autoxidative side chain to side chain CC coupling like natural lacquer film. The synthesized laccol films showed shallow color and hardness, which would make them useful as good preservative surface-coating materials.     

Characterization of humic acids in sediments from dam reservoirs by pyrolysis-gas chromatography/mass spectrometry using tetramethylammonium hydroxide: Influence of the structural features of humic acids on iron(II) binding capacity

The structural features of humic acids (HAs) isolated from sediments on the bottom of dam reservoirs that can affect their binding capacities for Fe(II) were investigated by pyrolysis-gas chromatography/mass spectroscopy using tetramethylammonium hydroxide (TMAH-py-GC/MS). The binding capacities for Fe(II) increased with increasing O/C molar ratio, suggesting that the oxygen-containing functional group content plays a role in the binding of Fe(II). However, it was not possible to identify specific binding-sites for Fe(II) by TMAH-py-GC/MS analysis. Although C_16:1ω7, iso-C_15:0 and anteiso-C_17:0 fatty acids, which serve as molecular markers of anaerobic microbial activity, were detected in all of the HA samples, the contents of these acids were not correlated with binding capacities for Fe(II). However, the ratio of C_16:0 to C_16:1ω7 fatty acids, which is used as an index of anaerobic bacterial activity, increased with increasing Fe(II) binding capacities of the HAs. It thus appears likely that the activities of anaerobic bacteria on the bottom of dam reservoirs contribute to alterations in the structural features for HAs, and that this process results in increased binding capacities for Fe(II).     

Gas chromatography/mass spectrometry and pyrolysis-gas chromatography/mass spectrometry for the chemical characterisation of modern and archaeological figs (Ficus carica)

Gas chromatography/mass spectrometry (GC/MS) after alkaline hydrolysis, solvent extraction and trimethylsilylation, and analytical pyrolysis using hexamethyldisilazane (HMDS) for in situ derivatisation followed by gas chromatographic/mass spectrometric analysis (Pyrolysis-silylation-GC/MS) were used to investigate the hydrolysable and soluble constituents, and the polymerised macromolecules of an archaeological fig (Ficus carica) recovered in Zaragoza (Spain), as well as of modern figs. The main aim was to study the compositional alterations undergone by the fig tissues in a particular archaeological environment: the fig was in a vessel and covered by a layer of a mixture of orpiment and gypsum. A comparison between the GC/MS results from modern and archaeological figs revealed that degradative reactions took place, leading to the disappearance/depletion of reactive (unsaturated fatty acids) and sensitive compounds (phytosterols and triterpenes). Py-silylation-GC/MS data provided evidence of a significant degradation of the saccharide and lipid components of the fig tissue, which left a residue enriched in polyphenols and polyesters.     

Characterisation of varnishes used in violins by pyrolysis-gas chromatography/mass spectrometry

The correct characterisation and a detailed knowledge of the materials originally used in violin varnishes, like natural resins, is crucial for the conservation in museums and for a suitable restoration technique. The study presented here reports on the potential of pyrolysis (Py) coupled with gas chromatography (GC) and mass spectrometry (MS) for the identification of chemical markers of each resin; this technique is very sensitive and selective, it needs a small quantity of sample and does not require chemical treatments. To improve the chromatographic behaviour of polar compounds the derivatising agent tetramethylammonium hydroxide (TMAH) in combination with pyrolysis has been used, in the so-called TMAH thermochemolysis or thermally assisted hydrolysis and methylation (THM), or more simply pyrolysis-methylation. The natural resins studied were colophony, sandarac, manila copal, elemi, amber and benzoin, mainly composed of terpenic compounds, with the exception of the latter, composed of aromatic compounds. Many compounds were identified; in particular, methyl esters of resinous acids that, individually or in a group, can be used as chemical markers. However, through this technique it was not possible to distinguish between the sandarac and manila copal resins because their chromatographic behaviour is very similar. Finally, the procedure applied has been employed in the characterisation of original varnish samples.     

Thermal degradation of deoxybenzoin polymers studied by pyrolysis-gas chromatography/mass spectrometry

The thermal degradation behavior of novel ultra-fire-resistant polymers and copolymers containing deoxybenzoin units in the backbone was studied by pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS). The polymers were synthesized by the polycondensation of 4,4′-bishydroxydeoxybenzoin (BHDB) with isophthaloyl chloride (to give polyarylates), phenylphosphonic dichloride (to give polyphosphonates), and their mixtures (to give poly(arylate-co-phosphonate) copolymers). The thermal decomposition, under nitrogen conditions, of BHDB-polyarylate was characterized by a simultaneous degradation of both the bisphenolic (deoxybenzoin) and isophthalate sub-units, whereas a three-step decomposition phenomenon was observed for the BHDB-polyphosphonate. BHDB-polymers containing phosphonate groups in the backbone did not show any phosphorus-based volatile decomposition products, whereas the corresponding bisphenol A-based polyphosphonates released volatile decomposition products comprised mainly of phosphorus-containing compounds.     

文物中多糖类胶结材料的热裂解-气相色谱/质谱识别

热裂解-气相色谱/质谱(Py-GC/MS)技术能够实现微量样品中有机组分的准确、快速检测,非常适用于文物中各类天然有机材料的定性分析。该研究以中国古代书画、建筑、器物等文化遗产中常用的淀粉、桃胶,以及西方文化遗产中常用的阿拉伯胶等多糖类胶结材料为研究对象,系统分析并总结各类材料的Py-GC/MS特征裂解组分及辨别方法。研究发现,淀粉、桃胶、阿拉伯胶在色谱保留时间前段的裂解产物基本一致,主要是小分子呋喃、酮类组分;在保留时间中段3类材料的裂解产物主要是呋喃型酮等组分,但不同材料的具体裂解组分差异明显;在保留时间后段,3类材料检出多种单糖衍生物以及单糖低聚体衍生物,其中桃胶与阿拉伯胶裂解组分较为接近,但与淀粉完全不同。因此,可根据不同保留时间段淀粉、桃胶、阿拉伯胶裂解产物的差异实现3类材料的辨别,其中1,6-脱水-β-D-吡喃葡萄糖只在淀粉中检出且色谱峰强度高,可以作为识别淀粉的特征组分;此外,可根据桃胶、阿拉伯胶在保留时间后段的裂解产物主要质谱碎片离子m/z 60、m/z 101的提取离子流图分布特征实现其辨别。基于所建立的Py-GC/MS方法,研究推断故宫旧藏清代剔红云龙纹天球瓶瓶口部...     

Rapid molecular assessment of the bioturbation extent in sandy soil horizons under pine using ester-bound lipids by on-line thermally assisted hydrolysis and methylation-gas chromatography/mass spectrometry

Each plant species has a unique chemical composition, and also within a given plant the various tissues differ from one another in their chemistry. These different compositions can be traced back after decay of the plant parts when they are transformed into soil organic matter (SOM). As a result, the composition of SOM reflects not only the plant origin, but also the various tissues, and the composition consequently provides an estimate of the contribution of above-ground vs. below-ground litter. From the latter distribution the extent of bioturbation (mixing of above-ground litter with the mineral soil) can be assessed.Application of thermally assisted hydrolysis and methylation (THM) using tetramethylammonium hydroxide (TMAH) and subsequent analysis by gas chromatography/mass spectrometry (GC/MS) releases all typical cutin- and suberin-derived aliphatic monomers (mono-, di- and trihydroxyalkanoic acids, alpha,omega-alkanedioic acids) as their methyl esters and/or ethers in a rapid manner. Using the distribution of omega-hydroxyalkanoic acids that are present in pine needle cutin (C(12) and C(14)) and not in root suberin, and those that are present in roots but not in needles (C(20) and C(22)), the extent of bioturbation (mixing of above-ground plant litter with the mineral soil) can be assessed. Similarly, the (9,16-dihydroxyhexadecanoic acid+9,10,18-trihydroxyoctadecanoic acid)/(C(20) + C(22) alpha,omega-alkanedioic acids) ratio reflects the degree of bioturbation. Three mineral soil profiles under Corsican pine with an A horizon that exhibited extensive bioturbation phenomena, and underlying C horizons with hardly any or no bioturbation, were investigated in order to examine the applicability of such an approach. It appeared that the A horizons contained all four mentioned omega-hydroxyalkanoic acids, while the C horizons contained virtually only the C(20) and C(22) members. The results not only suggest that bioturbation occurs in the A horizons, but also that possible illuviation or other transport mechanisms of omega-hydroxyalkanoic acids seem hardly ever or never to occur, which is a prerequisite for applying this biomarker approach in assessing degrees of bioturbation.     

Poly(amic acid) and polyimide characterization using gas chromatography/mass spectrometry and particle beam liquid chromatography/mass spectrometry

A number of polymers were hydrolyzed in NH₄OH and studied using gas chromatography/ mass spectrometry (GC/MS) and particle beam liquid chromatography/mass spectrometry (particle beam LC/MS) techniques. The polymers studied in this report were as follows: BPDA-PDA, BPDA-PDA-ODA, BPDA-PDA-GFDA, PMDA-ODA, and BTDA-APB. Some of the polymer samples were hydrolyzed in both their acid and imide forms to see if any mass spectrometric differences could be detected. ln all cases, the acid and imide spectra looked the same. GC/MS was unable to determine either the amine or acid portion of these polymers via a direct injection of the sample, but when the samples were first extracted with diethyl ether and this ether extract was injected into the chromatograph, the amine portion of the polymers was readily detected. The acid portion was, again, not detected in either the sample or the ether extract. The particle beam was able to detect both the amine and acid monomeric units in the nonextracted sample.     

Assessment of the degradation of polyurethane foams after artificial and natural ageing by using pyrolysis-gas chromatography/mass spectrometry and headspace-solid phase microextraction-gas chromatography/mass spectrometry

Polyurethane foams are widely present in museum collections either as part of the artefacts, or as a material for their conservation. Unfortunately many of PU foam artefacts are in poor condition and often exhibit specific conservation issues. Their fast thermal and photochemical degradations have been the aim of previous researches. It is now accepted that hydrolysis predominates for polyester-based polyurethane PU(ES) whereas oxidation is the principal cause of degradation for polyether-based polyurethane PU(ET) variety. Only a few studies have been devoted to volatile organic compounds (VOCs) emitted by polyurethanes and, to our knowledge, none were performed on polyurethane foams by using headspace-solid phase microextraction (HS-SPME). The objective of the work described here is to assess the impact of some environmental factors (humidity, temperature and daylight) on the degradation of PU foams by evaluating their volatile fractions. We investigated morphological changes, polymerized fractions and volatile fractions of (i) one modern produced PU(ES) foam and one modern PU(ET) foam artificially aged in different conditions as well as (ii) four naturally aged foams collected from various daily life objects and selected for the representativeness of their analytical data. Characterization procedure used was based on attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) and non-invasive headspace solid-phase microextraction coupled with gas chromatography and mass spectrometry (HS-SPME-GC/MS). In this paper, the formation of alcohol and acid raw products for PU(ES) and glycol derivatives for PU(ET) during natural and artificial ageing is confirmed. These main products can be considered as degradation markers for PU foams. Results show that artificial and natural ageing provide similar analytical results, and confirm that the dominant degradation paths for PU(ES) and for PU(ET) are hydrolysis and photo-oxidation, respectively. Lastly, we highlight that non-invasive HS-SPME-GC/MS analysis allows to distinguish between PU(ES) and PU(ET) at any point of their degradations.     

Analysis of catechins and condensed tannins by thermally assisted hydrolysis/methylation-GC/MS and by a novel two step methylation

The objective of this study is to observe high molecular weight markers of catechins and condensed tannins by thermally assisted hydrolysis/methylation (THM)-GC/MS. Techniques for formation of intact methylated flavanols of catechins using THM in the presence of trimethylsulfonium hydroxide (TMSH), and, of a dimer marker of condensed tannins using a novel two step methylation technique, are presented. The two step methylation procedure involves pre-methylation of the sample with trimethylsilyl diazomethane (TMS-diazomethane) followed by THM. The dimer marker, a methylated product containing the C–C linkage between adjacent flavanol units, has a molecular weight of 540. Intact methylated flavanols of catechins were also successfully observed as high molecular weight compounds including partially methylated catechin and epicatechin (3-flavanol, 3′,4′,5,7-tetramethoxy, cis/trans; m/z = 346), epigallocatechin and gallocatechin (3-flavanol, 3′,4′,5,5′,7-pentamethoxy, cis/trans; m/z = 376). These techniques were successfully applied to the analysis of series of condensed tannins isolated from plants, and catechins and other phenolics present in (hot water) extracts of tea leaves. In green tea the major catechins were identified as epicatechin and epigallocatechin along with flavonols and tannin dimers.     

Simultaneous analysis of tannin and lignin signatures in soils by thermally assisted hydrolysis and methylation using 13C-labeled TMAH

Tannin, condensed and hydrolysable, and lignin are two of the most abundant natural biopolymers in the environment. Yet it is still not possible using one analytical technique to simultaneously track each of their dynamics in litter and soils. Thermally assisted hydrolysis and methylation (THM) using tetramethylammonium hydroxide (TMAH) has been employed to investigate the cycling of tannin and lignin forms in one analysis, but sometimes with equivocal results as many of the products released may originate from both biopolymers. In this study we applied ¹³C-labeled TMAH in the analysis of soil organic matter in a soil profile under Corsican pine, an input lacking in hydrolysable tannins, to show the potential of this tool in tracking complex phenol chemistry. This method successfully allowed for a qualitative distinction among tannin and lignin input as well as permitting the inference of ring specific decay of condensed tannins.