Individual dissolution of single-walled carbon nanotubes in aqueous solutions of steroid or sugar compounds and their Raman and near-IR spectral properties

The individual solubilization of single-walled carbon nanotubes (SWNTs), achieved by using ten different anionic-, zwitterionic-, and nonionic-steroid biosurfactants and three different sugar biosurfactants, was examined. Aqueous micelles of anionic cholate analogues, such as sodium cholate (SC), sodium deoxycholate (SDC), sodium taurocholate (STC), sodium taurodeoxycholate (STDC), sodium glycocholate (SGC), as well as N,N-bis(3-D-gluconamidopropyl)cholamide (BIGCHAP) and N,N-bis(3-D-gluconamidopropyl)deoxycholamide (deoxy-BIGCHAP), exhibited good abilities to dissolve the SWNTs individually. Aqueous micelles of nonionic biosurfactants, such as sucrose monocholate (SMC), n-octyl-beta-D-glucoside (OG), n-decyl-beta-D-maltoside (DM), and n-decanoyl-N-methylglucamide (MEGA-10), could dissolve the SWNTs, however, the solubilization abilities were weaker than those of the anionic cholate analogues. In sharp contrast, the solubilization abilities of the zwitterionic micelles of 3-[(3-cholamidopropyl)dimethylammonio]propanesulfonic acid (CHAPS) and 3-[(3-cholamidopropyl)dimethylammonio]-2-hydroxypropanesulfonic acid (CHAPSO) were very low, and almost zero for OG. It is evident that the chemical structures, in particular the substituent groups of the surfactants, play an important role in the solubilization of SWNTs. The near-IR photoluminescence behaviors of the SWNTs dissolved in aqueous micelles and in 1 mM biosurfactants were investigated. The chirality indices of the SWNTs dissolved in these solutions depend on the chemical structures of the biosurfactants. The Raman spectra of the SWNTs dissolved in a 1 mM solution of SC suggest the selective extraction of the metallic SWNTs. Finally, a possible solubilization mechanism using steroid surfactants is described. The SWNTs dissolved individually in water-containing biocompounds are useful in many areas of nano- and materials chemistry.     

Helical superstructures of fullerene peapods and empty single-walled carbon nanotubes formed in water

Aqueous dispersions of fullerene C70-filled carbon nanotubes (C70@SWNTs or peapods) and empty single-walled carbon nanotubes (empty SWNTs) were prepared with the aid of trimethyl-(2-oxo-2-pyrene-1-yl-ethyl)-ammonium bromide (1), which is a carbon nanotube solubilizer. This is the first report describing the preparation and characterization of the transparent dispersion/dissolution of the peapods. The UV-vis-near-IR spectra of C70@SWNTs-1 and empty SWNTs-1 were almost identical. We found by means of transmission electron microscopy and atomic force microscopy that the empty SWNTs and C70-peapods form helical nanostructures in the shapes of rings, irregular rings, lassos, handcuffs, catenanes, pseudorotaxanes, and figure-eight structures. The mechanism of the superstructure formation has been discussed in relation to the unique characteristics of stiff polymer chains with the aid of an off-lattice Monte Carlo simulation.     

Regulation of the near-IR spectral properties of individually dissolved single-walled carbon nanotubes in aqueous solutions of dsDNA

Two different single-walled carbon nanotubes (SWNTs), the so-called HiPco and CoMoCAT, have been individually dissolved in aqueous solutions of double-stranded DNA (dsDNA). Atomic force microscopy (AFM) revealed the fine structures of the dsDNA-wrapped SWNTs. The near-IR absorption and photoluminescence (PL) spectra of aqueous solutions of dsDNA-wrapped SWNTs were recorded and, in pure water, we observed only a single two-dimensional PL spot from (6,5) SWNTs for both HiPco and CoMoCAT. In sharp contrast, when Tris-EDTA (TE) buffer was used in place of pure water, the PL-mapping images of the solutions showed chirality indices of (6,5), (7,5), (7,6), (8,4), (9,4), and (10,2) for HiPco-SWNTs, and (6,5) and (7,5) for CoMoCAT-SWNTs. The first semiconducting bands in the near-IR absorption spectra of solutions of dsDNA-wrapped SWNTs are different. To explain the observed differences in the near-IR absorption and PL behavior we conducted several experiments and found that the near-IR optical properties of the SWNTs can be modulated by changing the pH of the solutions. The pH break-points for near-IR absorption bleaching and PL quenching are different and the phenomena are explained by differences in the numbers of holes generated on the SWNTs. These findings are important from both fundamental and applied viewpoints.     

Investigation of SDS, DTAB and CTAB micelle microviscosities by electron spin resonance

Electron spin resonance spectroscopy (ESR) of the nitroxide labelled fatty acid probes (5-, 16-doxyl stearic acid) was used to monitor the micelle microviscosity of three surfactants at various concentrations in aqueous solution: sodium dodecyl sulphate (SDS), dodecyltrimethylammonium bromide (DTAB) and cetyltrimethylammonium bromide (CTAB). At low surfactant concentration, there is no micelle, the ESR probe is dissolved in water/surfactant homogeneous phase and gives his microviscosity. At higher surfactant concentration, an abrupt increase in microviscosity indicates the apparition of micelles and, the solubilization of the probes in micelles. The microviscosity of the three surfactants, in a large surfactant range, was obtained as well as the critical micelle concentration (CMC). The microviscosity increased slightly with the increase in surfactant concentration. Phosphate buffer lowered the CMC value and generally increased the microviscosity.     

Sol-gel Transition of Methylcellulose Solution in the Coexistence of Hexadecyltrimethylammonium Bromide and Sodium Chloride

The sol-gel transition of methylcellulose (MC) solution in the presence of NaCl and hexade-cyltrimethylammonium bromide (HTAB), together with MC/NaCl solution in the presence of HTAB and MC/HATB solution in the presence of NaCl, was investigated by the rheolog-ical measurements. It has been found that the sol-gel transition temperature of MC solution decreases linearly with the concentration of NaCl in solution but increases linearly with the concentration of HTAB in solution, respectively. However, the sol-gel transition temperature of MC/NaCl solution in the presence of HTAB keeps the same value, independent of theconcentration of HTAB in solution. On the other hand, the sol-gel transition temperature of MC/HTAB solution decreases linearly with the concentration of NaCl in solution. The experimental results suggest that, for MC/NaCl solution in the presence of HTAB, the salt-induced spherical micelles of HTAB should have formed in bulk solution. For MC solution in the absence of NaCl, no spherical micelles have been formed in bulk solution, though the concentration of HTAB in our experiment is almost one order of magnitude higher than the critical micelle concentration of HTAB in polymer-free solution. In fact, due to adsorption of HTAB on MC chains, the realconcentration of HTAB in bulk solution, is much less than the apparent concentration of HTAB dissolved in MC solution.     

阳离子表面活性剂R16HTAB及其复配体系的流变性能

用稳态和动态流变学方法研究了3-十六烷氧基-2-羟丙基三甲基溴化铵（R16HTAB）单纯以及水杨酸钠（NaSal）存在下溶液的流变特性．无盐体系中,在测定的浓度范围内,表面活性剂与零剪切黏度呈指数关系（η0∝c^2．53）．水杨酸钠的加入促进了体系由球状向蠕虫状胶束转化．Cox—Merz规则和Cole-Cole图证明,混合体系生成了蠕虫状胶束．与传统的CTAB比较,无论水杨酸钠存在与否,R16HTAB水溶液的流变性能均较好,这主要归因于羟丙基基团的插入,使得R16HTAB和NaSal分子之间形成氢键连接,生成了更加稳定的三维网络结构．应用冷冻蚀刻电子显微镜技术进一步证实了体系中蠕虫状胶柬的存在．     

Solubility measurement of methane in aqueous solution of sodium dodecyl sulfate at ambient temperature and near hydrate conditions

Solubility data of methane in aqueous solutions of sodium dodecyl sulfate (SDS) with different concentrations were measured at ambient temperature and near hydrate conditions. The critical micelle concentration (CMC) and the number of methane molecules dissolved in each micelle of the methane + water + SDS system were calculated and compared with those of the ethylene + water + SDS system. The results demonstrated that the micelles could be formed in the SDS concentration range where an efficient promotion effect on hydrate formation was previously reported; the micelle solubilization to methane molecules was remarkable near hydrate conditions, and the ethylene molecules could be solubilized in micelles in preference to methane molecules.     

The solubilization of n-pentane gas in sodium dodecyl sulfate-polyethylene glycol solutions with and without electrolyte

The solubility of n-pentane gas in aqueous solution of sodium dodecyl sulfate (SDS), SDS-0.1 wt% polyethylene oxide (PEG), SDS-0.1 wt% PEG+NaCl (0.1 mol/l), and SDS-0.1 wt% PEG+NaOH (0.1 mol/l) has been determined at 318.15 K. The concentration of SDS (m(SDS)) is up to 50 mmol/kg. The solubility increases linearly with the concentration of SDS above its critical micelle concentration (CMC) or critical aggregation concentration (CAC), indicating that micelles in the solutions solubilize the gas molecules and the solubility of n-pentane gas in the micelles is independent of the SDS concentration. It was found that the solubilization ability of micelles bound to PEG and free micelles to n-pentane gas is almost the same. The solubility of n-pentane gas in micelle phase is three magnitudes higher than that in the bulk solution. The solubilization property of SDS is changed by the addition of PEG, although the solubilizing effect of the polymer alone is not considerable. NaCl and NaOH affect the solubilization noticeably and increase the interaction strength between SDS and PEG. The standard Gibbs energies for the transfer of n-pentane gas from bulk phase to micelle phase are large negative values, indicating that the hydrocarbon gas prefers to exist in the hydrophobic interior of the micelles.     

Encapsulation of curcumin in cationic micelles suppresses alkaline hydrolysis

The alkaline hydrolysis of curcumin was studied in three types of micelles composed of the cationic surfactants cetyl trimethylammonium bromide (CTAB) and dodecyl trimethylammonium bromide (DTAB) and the anionic surfactant sodium dodecyl sulfate (SDS). At pH 13, curcumin undergoes rapid degradation by alkaline hydrolysis in the SDS micellar solution. In contrast, alkaline hydrolysis of curcumin is greatly suppressed in the presence of either CTAB or DTAB micelles, with a yield of suppression close to 90%. The results from fluorescence spectroscopic studies reveal that while curcumin remains encapsulated in CTAB and DTAB micelles at pH 13, curcumin is dissociated from the SDS micelles to the aqueous phase at this pH. The absence of encapsulation and stabilization in the SDS micellar solution results in rapid hydrolysis of curcumin.     

单分子链胶束的胶束化行为与相关新概念的提出

采用水溶液均聚合方法,制备了阳离子型表面活性单体（2-丙烯酰胺基）乙基十四烷基二甲基溴化铵（AMC14AB）的均聚物,使用荧光探针法、表面张力测定及电导测定法,重点考察了均聚物P（AMC14AB）在水溶液中的胶束化行为与表面吸附现象．在水溶液中,均聚物P（AMC14AB）呈现单分子链胶束的聚集形态,具有零临界胶束浓度（CMC=0）,从开始加入P（AMC14AB）起,水溶液中随即产生单分子链胶束,不存在Krafft温度．P（AMC14AB）在溶液表面也发生表面吸附,使水的表面张力下降,即P（AMC14AB）也具有表面活性;随着浓度增大,表面吸附量增大,水的表面张力持续下降;当表面吸附达到饱和时,表面张力一浓度曲线上出现突变点,该点应该定义为饱和的表面吸附浓度（SSAC）,而不应该再称为临界胶束浓度．P（AMC14AB）单分子链胶束溶液对疏水有机物（甲苯）的增溶情况,明显不同于普通小分子表面活性剂十六烷基二甲基溴化铵（CTAB）的多分子胶束溶液,甲苯增溶量-P（AMC14AB）浓度的关系曲线上无突变点,而且对甲苯的增溶能力高于CTAB的多分子胶束溶液．     

Tuning the optical properties of a water-soluble cationic poly(p-phenylenevinylene): surfactant complexation with a conjugated polyelectrolyte

In this work, we investigate the emission and absorbance properties of the novel water-soluble cationic conjugated polymer poly{2,5-bis[3-(N,N,N-triethylammonium bromide)-1-oxapropyl]-1,4-phenylenevinylene}, denoted here as P2, in the presence of varying amounts of the anionic surfactant sodium dodecylsulfate (SDS). We show that the absolute photoluminescence quantum efficiency (PLQE), the absorption wavelength, and the emission wavelength of an aqueous solution of P2 can be adjusted according to the surfactant/polymer ratio in aqueous solution. In particular, we show that the addition of SDS to P2 increases the polyelectrolyte's PLQE to approximately 40%. An observed red shift in the emission spectra upon addition of the surfactant is attributed to the reduction in electrostatic repulsive interactions between side chains that minimize the benzene ring twisting along the backbone structure. At the surfactant's critical micelle concentration, the P2 chains wrap around the outer surface of the SDS micelles. This work has implications on the development of new stable poly(p-phenylenevinylene)-based photovoltaic and electroluminescent materials with tunable optical properties.     

Interaction of slightly cross-linked gels of poly(diallyldimethylammonium bromide) with sodium dodecyl sulfate. Diffusion of surfactant ions in gel

The dynamics of the changing microenvironment of the fluorescent probe pyrene in slightly cross-linked networks of poly(diallyldimethylmmonium bromide) during diffusion of sodium dodecyl sulfate (SDS) in the gel phase has been investigated by fluorescence spectroscopy. Values of the spectral ratio I₃/I₁ for pyrene monomer included in SDS micelles in the swollen networks fall between the corresponding values for pyrene in water and for pyrene dissolved in SDS micelles in aqueous solution. In the narrow interval of the surfactant concentrations in the gel phase, the formation of pyrene excimers is observed. The values of the critical micelle concentration in the gel phase (ca. 5 × 10^?4 to 8 × 10^?4 mol/L) are tenfold lower than in aqueous solutions of the surfactant. The effective micellar diffusion coeffecient D in the gel phase increases with increasing swelling of the network. © 1993 John Wiley & Sons, Inc.     

Structure and physico-chemical properties in mixed aqueous solution of sodium alkvicarboxylate-alkyltrimethylammonium bromide

The physico-chemical properties of organized assemblies (micelle or vesicle ) from sodium alkylcarboxylate - alkyltrimethyl -ammonium bromide mixture have been investigated systematically. In different mixed cationic-anionic surfactant systems, micelles and vesicles can coexist or be transformed into each other on different conditions. The experimental results are explained prelimilarily from the viewpoint of molecular packing geometry. The solubilization of organic compound in the mixed surfactant system was also studied in detail.     

Apparent Molar Volume and Apparent Molar Adiabatic Compressibility Studies of 2,6-Di-tert-butyl-4-methylphenol and 2-tert-Butyl-4-methoxyphenol in Aqueous Micelle Solutions of Hexadecyltrimethylammonium Chloride as a Function of Surfactant Concentration and Temperature

Ultrasonic velocities and densities of aqueous solutions of cetyltrimethylammonium chloride have been measured at concentrations below 0.35 mol kg^-1 at 25, 35, and 45°C. Apparent molar volume and apparent molar adiabatic compressibility properties of the aqueous surfactant solutions were derived from these data. Apparent molar volumes and apparent molar adiabatic compressibilities of 2,6-di-tert-butyl-4-methylphenol and 2-tert-butyl-4-methoxyphenol dissolved in aqueous micellar solutions of cetyltrimethylammonium chloride were determined as a function of surfactant concentration and temperature. The results obtained for the binary and ternary systems are compared with those previously published for binary aqueous cetyltrimethylammonium bromide systems and for ternary systems of this surfactant containing the same additives. The degree of counterion dissociation from the micelles and the effect this has on the extent of hydration of the head group region of the micelle are shown to have an effect on the solubilization sites of hydrophobic-like additives in these micelles.     

Spectrophotometric study of interaction and solubilization of procaine hydrochloride in micellar systems

The interaction of Procaine hydrochloride (PC) with cationic, anionic and non-ionic surfactants; cetyltrimethylammonium bromide (CTAB), sodium dodecyl sulfate (SDS) and triton X-100, were investigated. The effect of ionic and non-ionic micelles on solubilization of Procaine in aqueous micellar solution of SDS, CTAB and triton X-100 were studied at pH 6.8 and 29°C using absorption spectrophotometry. By using pseudo-phase model, the partition coefficient between the bulk water and micelles, K_x, was calculated. The results showed that the micelles of CTAB enhanced the solubility of Procaine higher than SDS micelles (K_x = 96 and 166 for SDS and CTAB micelles, respectively) but triton X-100 did not enhanced the solubility of drug because of weak interaction with Procaine. From the resulting binding constant for Procaine-ionic surfactants interactions (K_b = 175 and 128 for SDS and CTAB surfactants, respectively), it was concluded that both electrostatic and hydrophobic interactions affect the interaction of surfactants with cationic procaine. Electrostatic interactions have a great role in the binding and consequently distribution of Procaine in micelle/water phases. These interactions for anionic surfactant (SDS) are higher than for cationic surfactant (CTAB). Gibbs free energy of binding and distribution of procaine between the bulk water and studied surfactant micelles were calculated.      

Dissolution behavior of homologously generated surfactant molecular complexes (SMC) in aqueous media: A clue to the elucidation of the phenomenon "solubilization"

The solution behavior of homologously obtained crystalline surfactant molecular complexes (SMCs) that are generated between quaternary ammonium bromide and several additive materials has shed light on the recognition of fundamentals of solubilization. It has been revealed that the SMCs derived from long-alkyl-chain surfactants are sufficiently dissolved in water through the path of micellar dispersion above the cmc's of the complex surfactants, whereas the short-chain homologues cannot dissolve in water but dissociate the complexes, resulting in a heterogeneous phase made up of the liberated additives. The fact agrees perfectly with the familiar aspects of solubilization by surfactant; i.e., the longer the alkyl chain of the surfactant becomes, the more effective it is for solubilization. Based on these results, it has been deduced that the possibility for any pair of surfactant and solubilizate (additive) to realize solubilization simply depends on the relative importance of equilibrium of dissociation or association of the SMC species in aqueous medium.     

Solubilization of a water-insoluble dye in aqueous NaBr solutions of alkylpyridinium bromides and its relation to micellar size and shape

In order to investigate the effect of added salt on micelle size, shape, and structure the solubilization of Orange OT in aqueous NaBr solutions of decylpyridinium bromide (DePB), dodecylpyridinium bromide (DPB), tetradecylpyridinium bromide (TPB), and hexadecylpyridinium bromide (CPB) has been examined. The solubilization powers of DePB and DPB micelles increase with increasing NaBr concentration up to 2.86 and 3.07 mol dm^–3, respectively, but above these concentrations remain unaltered. This suggests that spherical micelles of DePB and DPB can have a maximum and constant size at NaBr concentrations higher than these threshold concentrations. On the other hand, the solubilization powers of TPB and CPB micelles increase in the whole range of NaBr concentration studied. The dependencies of the solubilization powers of their micelles on the counterion concentration change at 0.10 and 0.03 mol dm^–3 NaBr, respectively, as suggests that TPB and CPB micelles undergo the sphere–rod transition at those concentrations. Orange OT is a more suitable probe for detecting the presence of the maximum- and constant-size spherical micelle than Sudan Red B.     

Structure and properties of aqueous dispersions of sodium dodecyl sulfate with carbon nanotubes

The dispersing action of the surfactant (sodium dodecyl sulfate, SDS) on the carbon nanotubes (CNT) in aqueous medium has been studied. Electron microscopy, molecular docking, NMR and IR spectroscopies were applied to determine the physical-chemical properties of CNT dispersions in SDS—water solutions. It was established that micellar adsorption of the surfactant on the surface of carbon material and solubilization of SDS in aqueous medium contribute to improving CNT dispersing in water solutions. It was shown that the non-polar hydrocarbon radicals of a single surfactant molecule form the highest possible number of contacts with the graphene surface. Upon increase of the SDS in solution these radicals form micelles connected with the surface of the nanotubes. At the sufficiently high SDS concentration the nanotube surface becomes covered with an adsorbed layer of surfactant micelles. Water molecules and sodium cations are concentrated in spaces between micelles. The observed pattern of micellar adsorption is somewhat similar to a loose bilayer of surfactant molecules.     

Recoverable solution reaction of HiPco carbon nanotubes with hydrogen peroxide

There is increasing interest in developing single-walled carbon nanotubes (SWNTs)-based optical biosensors for remote or in vitro and in vivo sensing because the near-IR optical properties of SWNTs are very sensitive to surrounding environmental changes. Many enzyme-catalyzed reactions yield hydrogen peroxide (H(2)O(2)) as a product. To our knowledge, there is no report on the interaction of H(2)O(2) with SWNTs from the optical sensing point of view. Here, we study the reaction of H(2)O(2) with an aqueous suspension of water-soluble (ws) HiPco SWNTs encased in the surfactant sodium dodecyl sulfate (SDS). The SWNTs are optically sensitive to hydrogen peroxide in pH 6.0 buffer solutions through suppression of the near-IR absorption band intensity. Interestingly, the suppressed spectral intensity of the nanotubes recovers by increasing the pH, by decomposing the H(2)O(2) into H(2)O and O(2) with the enzyme catalase, and by dialytically removing H(2)O(2). Preliminary studies on the mechanisms suggest that H(2)O(2) withdraws electrons from the SWNT valence band by charge transfer, which suppresses the nanotube spectral intensity. The findings suggest possible enzyme-assisted molecular recognition applications by selective optical detection of biological species whose enzyme-catalyzed products include hydrogen peroxide.     

Synthesis and characterization of ZnS-montmorillonite nanocomposites and their application for degrading eosin B

Nanocomposites of zinc sulfide (ZnS) and montmorillonite (MMT) were prepared via a hydrothermal route. In this method, the MMT treated with hexadecyltrimethyl ammonium bromide (HTAB) aqueous solution was dispersed in the aqueous solution of thiourea and Zn(OOCHCH(3))(2)2H(2)O, and heated at 170 degrees C for about 4 h, resulting in ZnS-MMT composites. The as-prepared nanocomposites were characterized with X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and nitrogen sorption analysis. It was demonstrated that the interlayer space of MMT was enlarged from 0.98 to 3.77 nm after the treatment with HTAB aqueous solution, and the ZnS nanoparticles were deposited on the layers of MMT. Nitrogen sorption analysis demonstrated that the specific surface area of the samples decreased from 39.2 m(2)/g of the pristine MMT to 5.9 m(2)/g of the final ZnS-MMT composites. The resulting ZnS-MMT nanocomposites (50.0 mg) could degrade eosin B completely in aqueous solution (75 ml, 3.2x10(-5) M) within 20 min under UV irradiation.