Ordered mesoporous silica materials (SBA-15) with good heat-resistant magnetism

A series of highly ordered mesoporous materials (CF-SBA-15) with heat-resistant magnetism have been successfully prepared from impregnation of cobalt salt, iron salt, and citric acid with as-synthesized SBA-15. XRD and N₂ isotherms indicate that these materials have highly ordered hexagonal mesoporous symmetry and open pore systems. The measurement of magnetic property shows that these materials are ferromagnetic even if calcined at 550 °C for 10 h in air, indicating their good heat-resistant magnetism. These results would be very important for recycle and regeneration of adsorbents and catalysts in practical applications. Moreover, this method may be useful for other mesoporous materials with thermally stable magnetism from a combination of other mesoporous materials such as MCM-41 with magnetic nanoparticles of MnFe₂O₄ and NiFe₂O₄.     

Modification of functionalized mesoporous silica on the formation and the catalytic performance of platinum nanocatalysts

Several functionalized mesoporous silicas (MCM-41 and SBA-15 terminated with amino groups by multistep graft) are prepared and used as carriers for platinum nanoparticles. Modification of the grafted molecules is investigated on the component of the silicas and the formation of nanoparticles. Catalytic performance of the loaded platinum nanocatalysts is tested on selective hydrogenation of ortho-chloronitrobenzene (o-CNB). Results indicate that SBA-15 can be grafted with more amino groups than MCM-41. In most cases, small quantity of platinum precursor benefits the formation of small platinum nanoparticles on the functionalized silicas. The platinum nanocatalysts loaded on the one-step grafted silicas hold better catalytic activity and slightly lower selectivity to ortho-chloroaniline (o-CAN) than those loaded on the two-step grafted silicas. Besides the advantage of reuse, the loaded platinum catalysts on the functionalized silicas have similar catalytic property as the colloidal platinum nanocatalysts.     

Pore size distribution calculation from H NMR signal and N2 adsorption–desorption techniques

The pore size distribution (PSD) of nano-material MCM-41 is determined using two different approaches: N₂ adsorption–desorption and ¹H NMR signal of water confined in silica nano-pores of MCM-41. The first approach is based on the recently modified Kelvin equation [J.V. Rocha, D. Barrera, K. Sapag, Top. Catal. 54(2011) 121–134] which deals with the known underestimation in pore size distribution for the mesoporous materials such as MCM-41 by introducing a correction factor to the classical Kelvin equation. The second method employs the Gibbs–Thompson equation, using NMR, for melting point depression of liquid in confined geometries. The result shows that both approaches give similar pore size distribution to some extent, and also the NMR technique can be considered as an alternative direct method to obtain quantitative results especially for mesoporous materials. The pore diameter estimated for the nano-material used in this study was about 35 and 38 Å for the modified Kelvin and NMR methods respectively. A comparison between these methods and the classical Kelvin equation is also presented.     

Optical oxygen sensing materials based on a novel dirhenium(I) complex assembled in mesoporous silica

A new dirhenium(I) complex fac-[{Re(CO)₃(4,7-dinonadecyl-1,10-phenanthro -line)}₂ (4,4′-bipyridyl)] (trifluoromethanesulfonate)₂ (denoted as D-Re(I) ) is assembled in MCM-41 and SBA-15 type mesoporous silica support. The emission peaks of D-Re(I) in D-Re(I)/MCM-41 and D-Re(I)/SBA-15 are observed at 522 and 517 nm, respectively. Their long excited lifetimes, which are of the order of microseconds, indicate the presence of phosphorescence emission arising from the metal to ligand charge-transfer (MLCT) transition. The luminescence intensities of D-Re(I)/MCM-41 and D-Re(I)/SBA-15 decrease remarkably with increase in the oxygen concentration, meaning that they can be used as optical oxygen sensing materials based on luminescence quenching. The ratios I₀/I₁₀₀ of D-Re(I)/MCM-41 and D-Re(I)/SBA-15 are estimated to be 5.6 and 20.1, respectively. The obtained Stern-Volmer oxygen quenching plots of the mesoporous sensing materials could be fitted well to the two-site Demas model and Lehrer model.     

Functionalized SBA-15 materials for bilirubin adsorption

To investigate the driving force for bilirubin adsorption on mesoporous materials, a comparative study was carried out between pure siliceous SBA-15 and three functionalized SBA-15 mesoporous materials: CH₃-SBA-15 (MS), NH₂-SBA-15 (AS), and CH₃/NH₂-SBA-15 (AMS) that were synthesized by one-pot method. The obtained materials exhibited large surface areas (553-810 m²/g) and pore size (6.6-7.1 nm) demonstrated by XRD and N₂-ad/desorption analysis. The SEM images showed that the materials had similar fiberlike morphology. The functionalization extent was calculated according to ²⁹Si MAS NMR spectra and it was close to the designed value (10%). The synthesized mesoporous materials were used as bilirubin adsorbents and showed higher bilirubin adsorption capacities than the commercial active carbon. The adsorption capacities of amine functionalized samples AMS and AS were larger than those of pure siliceous SBA-15 and MS, indicating that electrostatic interaction was the dominant driving force for bilirubin adsorption on mesoporous materials. Increasing the ionic strength of bilirubin solution by adding NaCl would decrease the bilirubin adsorption capacity of mesoporous material, which further demonstrated that the electrostatic interaction was the dominant driving force for bilirubin adsorption. In addition, the hydrophobic interaction provided by methyl groups could promote the bilirubin adsorption.     

Characterization and adsorptive application of ordered mesoporous silicas

The adsorption behaviour of the n-octane/ethanol binary liquid mixture has been studied on ordered mesoporous silica materials. Adsorption excesses on SBA-15, SBA-16 and MCM-48 solids are measured and described by mathematical functions. The experimental adsorption excess isotherms are presented and discussed. The mesoporous silicas used for liquid-adsorption experiments are characterized by nitrogen adsorption before and after liquid adsorption by the powder X-ray diffraction (XRD) and by the sample controlled thermal analysis (SCTA).     

Adsorption characterization of surfactant-templated ordered mesoporous silicas synthesized with and without hydrothermal treatment

This work reports a systematic study of ordered mesoporous silicas (OMSs) synthesized with and without hydrothermal treatment at 373 K for a series of surfactants of different alkyl chain length (from C10 to C18). For these samples nitrogen adsorption and small angle X-ray scattering (SAXS) data were measured to characterize their adsorption and surface properties. Namely, nitrogen adsorption isotherms were used to evaluate their specific surface area, pore volume and pore size distribution, whereas SAXS data provided information about their structural ordering. It is shown that while the room temperature synthesis afforded OMS samples with cubic MCM-48 structure, an additional 5-day hydrothermal treatment of these samples at 373 K caused their transformation to MCM-41 (two-dimensional hexagonal structure) and improved their pore uniformity, which was manifested by reducing the width of pore size distribution.     

Research progress of nanomaterial-mediated photodynamic therapy in tumor treatment

Journal of Nanoparticle Research - In modern methods of synthesis of nanostructured materials based on mesoporous silica matrices (MCM-41, SBA-15), it is not possible to simultaneously fine adjust...     

Functionalized SBA-15 organosilicas as sorbents of zinc(II) ions

SBA-15 nanoporous silicas functionalized with amine-, thiol-, vinyl-, phenyl- and cyano surface groups were synthesized by using the amphiphilic block copolymer P123 as the structure-directing agent. The obtained materials have a well-developed porous structure - the values of specific surface area are in the range 800-950 m²/g and the sizes of cylindrical mesopores are in the range 7.4-8.6 nm. It was established that the size of the mesopores strongly depends even on small amounts of co-monomers co-condensing with TEOS. Adsorption of Zn(II) ions at the SBA-15/NaCl interface was investigated by means of the radioactive isotope tracer technique over the pH range of 3-11. Surface charge density, adsorption density, pH_50% and ΔpH_10-90% parameters for different concentrations of the carrying electrolyte were evaluated and discussed.     

Comparative studies of p6m siliceous mesostructures by powder X-ray diffraction and nitrogen adsorption

Two-dimensional mesostructures with p6m symmetry such as MCM-41 and SBA-15 are the subject of intensive studies by using nitrogen and argon adsorption, transmission electron microscopy, and powder X-ray diffraction/scattering techniques. The latter may involve the X-ray diffraction (XRD) or small angle X-ray scattering (SAXS) measurements. The XRD/SAXS patterns for the aforementioned ordered mesostructures often exhibit four or more reflections, the most intensive one, 1 0 0 peak, and three less intensive peaks, 1 1 0, 2 0 0, 2 1 0. So far, analysis of these patterns was usually limited for the evaluation of the unit cell parameter and the identification of the observed peaks. In this work we present an attempt to analyze the XRD/SAXS patterns by including not only the position of observed peaks but also their intensity. It is shown that the intensity of these peaks, especially 1 1 0 peak, depends on the ratio of the pore diameter to the unit cell parameter. In particular, this dependence was studied for the intensity ratio of 1 1 0 and 2 0 0 peaks assuming 2 0 0 peak as a reference reflection because of its nearness to 1 1 0 peak (which minimizes the influence of other factors than the structural ones on the 1 1 0/2 0 0 intensity ratio analysis) and similar intensity to that of 1 1 0 peak. The values of the 1 1 0/2 0 0 intensity ratio were determined for many MCM-41 and SBA-15 samples and analyzed in relation to the pore width/unit cell ratio, where the pore width was estimated on the basis of nitrogen adsorption data or by the XRD/SAXS structure modeling. Comparative analysis of this intensity ratio for numerous MCM-41 and SBA-15 samples allows for a quick estimation of the pore width and provides some information about hexagonality of mesopores in these materials.     

Comparison of silver nanoparticles confined in nanoporous silica prepared by chemical synthesis and by ultra-short pulsed laser ablation in liquid

Hexagonally ordered mesoporous silica materials, MCM-41 and SBA-15, have been synthesized and loaded with Ag nanoparticles, utilizing both chemical synthesis and ultra-short pulsed laser ablation in liquid. In laser ablation, a silver target, immersed in aqueous suspension of ordered mesoporous silica SBA-15, was irradiated by ultra-short laser pulses to generate silver nanoparticles. For comparison, samples of similar silver contents were prepared either by incorporating silver into the SBA-15 during a hydrothermal synthesis or by introducing silver in MCM-41 by template ion-exchange. Samples were characterized by XRD, N₂ physisorption, TEM and UV–vis spectroscopy. All preparations contained significant amount of 5–50 nm size silver agglomerates on the outer surface of the silica particles. The laser ablation process did not cause significant destruction of the SBA-15 structure and metallic silver (Ag⁰) nanoparticles were mainly generated. It is demonstrated that by laser ablation in aqueous silica suspension smaller and more uniform metallic silver particles can be produced and loaded on the surface of the silica support than by synthesis procedures. Catalytic properties of the samples have been tested in the total oxidation of toluene. Because of its favorable Ag dispersity, the Ag/SBA-15 catalyst, generated by the laser ablation method, had better catalytic stability and, relative to its Ag load, higher activity than the conventional Ag/SBA-15 preparations.     

Studies of intrawall porosity in the hexagonally ordered mesostructures of SBA-15 by small angle X-ray scattering and nitrogen adsorption

Ordered mesoporous silicas (OMSs) such as SBA-15 (p6mm symmetry group) synthesized in the presence of block copolymers containing poly(ethylene oxide) blocks possess irregular complementary pores in the walls of ordered mesopores. The X-ray scattering caused by this complementary porosity contributes to the background of the SAXS patterns. This work shows the possibility of using the SAXS data for the study of intrawall channels interconnecting ordered cylinders in SBA-15. The proposed SAXS analysis was tested by using a series of SBA-15 samples obtained at different temperatures of hydrothermal treatment (from 60 to 180 °C). The structural modelling of the SAXS patterns recorded for a series of SBA-15 samples was performed by using the continuous density function (CDF) technique in combination with the derivative difference minimization (DDM) method of full-profile refinement. This method is well suited for extraction of the background curves from the SAXS patterns. The resulting smooth background curves were analyzed by the well-known method in the SAXS theory used for evaluation of heterogeneity distributions, which in this case characterize the intrawall complementary porosity. A relatively good agreement has been observed between the data obtained by SAXS and nitrogen adsorption analysis. The SAXS analysis is sufficiently sensitive for examination of heterogeneous microporosity in SBA-15 materials. The average diameter of intrawall pores for the SBA-15 sample obtained at 60 °C was only about 1.4 nm. However, this diameter increased with the increasing temperature of hydrothermal treatment; namely, it was 1.5, 1.8, 2.6, 2.6, 3.5 and 5.2 nm for the SBA-15 samples hydrothermally treated at 80, 100, 120, 140, 160 and 180 °C, respectively.     

Preparation and characterization of carbamoylphosphonate(CMPO) silane grafted on various mesoporous silicas

The carbamoylphosphosphonate silane (CMPO analogue; 2-(diphenylphosphoryl)-N-(3-(triethoxysilyl)propyl) acetamide) modified mesoporous silica was prepared via a post-synthesis grafting method for the effective purification of rare earth elements. The guest CMPO analogue was synthesized by direct coupling reaction of 2-(diphenylphosphoryl) acetic acid and 3-(triethoxysilyl)propan-1-amine. Various mesoporous silicates such as MCM-41, SBA-15, or amorphous silica nanoparticles were adopted as host materials. The resulting surface-modified mesoporous materials were characterized with respect to their structural integrity, surface area, and pore size and the concentration of the CMPO silane species. These CMPO functionalized periodic mesostructured silicates offer the potential of applications as catalysts, sensors, or environmental sorbents.     

Adsorption studies of thermal stability of SBA-16 mesoporous silicas

Cage-like ordered mesoporous silicas, SBA-16, and ethane-silicas with cubic (Im3m) and (Fm3m) symmetry groups were synthesized with addition of sodium chloride by using tetraethyl orthosilicate (TEOS) as silica precursor, 1,2-bis(triethoxysilyl)ethane (BTESE) as bridged silsesquioxane and poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide) triblock copolymer Pluronic F127 (EO₁₀₆PO₇₀EO₁₀₆) as template at low acid concentrations. The resulting samples were subjected to extraction in order to remove the polymeric template. The as-synthesized and extracted materials were calcined in the range of 350-900 °C to determine their thermal stability. Based on the XRD analysis and nitrogen adsorption data such as the BET specific surface area, volume of primary mesopores, pore wall thickness and pore size distributions, the SBA-16 silicas exhibit relatively high thermal stability because their mesostructural ordering was retained even up to 900 °C. However, an increase in the calcination temperature tended to decrease significantly the BET surface area, volumes of primary and complementary pores, and to less extent the pore size and pore wall thickness due to the structural shrinkage. Furthermore, the as synthesized samples subjected to a short extraction with acidic ethanol solution possessed even better thermal stability. On the other hand, calcination at 550 °C of ethane-silicas caused a complete removal of the ethane bridging groups from the periodic mesoporous organosilicas and their calcination above 800 °C led to the partial collapse of the structure.     

Synthesis of silica-pillared clay (SPC) with ordered mesoporous structure by one-step method without preswelling process

The simultaneous intercalation of surfactants and TEOS into clay interlayers and subsequent intragallery ammonia-catalyzed hydrolysis of TEOS resulted in mesoporous silica-pillared clay (SPC). These SPC materials exhibited refractions corresponding to a basal spacing of 3.7-4.3 nm, a uniform pore size of 2.5-3.16 nm and large surface areas of 567-576 m²/g. Our results indicate that surfactants play a decisive role in pore formation, because they act as micelle-like template during the hydrolysis of TOES. Moreover, the pore size of SPC derivatives is controllable by the molecular length of surfactant. All of the SPC materials reported here exhibit high catalytic activity and selectivity for coker gas oil (CGO) cracking reaction in comparison to parent MCM-41 and Al-MCM-41. The excellent acid catalytic activity, together with their sable, well-organized porous structure, opens up new opportunities for applications in catalysis.     

Studies on ordered mesoporous materials for potential environmental and clean energy applications

Two series of ordered mesoporous materials, SBA-15 silica and CMK-3 carbon were synthesized. The ordered nanostructure of these materials was confirmed by TEM and XRD analysis. Structural parameters including the specific surface area, pore volume and pore size distribution were determined on the basis of nitrogen adsorption data at 77 K. Potential applications of these materials were explored in relation to the CO₂ sequestering, methane storage and fuel desulfurization. Initial studies of both materials showed their usefulness for environmental and clean energy applications. SBA-15 modified with triethanolamine showed a very good adsorption selectivity for CO₂ while its adsorption reversibility was retained. Also, this material after CuCl deposition was useful for removal of fuel thiophenes. However, CMK-3 was shown to be promising material for storage of natural gas. As high as 41 wt.% of methane was stored in this material in the presence of appropriate amount of water.     

Synthesis of thiol-functionalized MCM-41 mesoporous silicas and its application in Cu(II), Pb(II), Ag(I), and Cr(III) removal

Thiol-functionalized MCM-41 mesoporous silicas were synthesized via evaporation-induced self-assembly. The mesoporous silicas obtained were characterized by X-ray diffraction (XRD), nitrogen adsorption–desorption analysis, Fourier transform infrared spectroscopy (FTIR), elemental analysis (EA), transmission electron microscopy (TEM), and scanning electron microscopy (SEM). The products were used as adsorbents to remove heavy metal ions from water. The mesoporous silicas (adsorbent A) with high pore diameter (centered at 5.27 nm) exhibited the largest adsorption capacity, with a BET surface area of 421.9 m² g^?1 and pore volume of 0.556 cm³ g^?1. Different anions influenced the adsorption of Cu(II) in the order NO₃ ^? < OAc^? < SO₄ ^2? < CO₃ ^2? < Cit^? < Cl^?. Analysis of adsorption isotherms showed that Cu²⁺, Pb²⁺, Ag⁺, and Cr³⁺ adsorption fit the Redlich–Peterson nonlinear model. The mesoporous silicas synthesized in the work can be used as adsorbents to remove heavy metal ions from water effectively. The removal rate was high, and the adsorbent could be regenerated by acid treatment without changing its properties.     

Preparation of highly ordered mesoporous AlSBA-15-SO3H hybrid material for the catalytic synthesis of chalcone under solvent-free condition

Single-step preparation of SBA-15 materials functionalized with both propylsulfonic acid groups and aluminum species (AlSBA-15-SO₃H) was carried out by hydrothermal treatment of a mixture of aluminum isopropoxide, 3-mercaptopropyltriethoxysilane, tetraethoxysilane, and triblock copolymer surfactant. At Si/Al molar ratio of 11-96, the materials exhibited well-ordered hexagonally arranged mesopores with pore diameter of ca. 9 nm, BET surface area of 546.9-666.0 m² g⁻¹, and pore volume of 0.82-1.03 cm³ g⁻¹. As-prepared AlSBA-15-SO₃H was successfully used in the Claisen-Schmidt condensation reaction of benzaldehyde with acetophenone to produce chalcone under solvent-free condition, and the influence of the reaction parameters including temperatures, molar ratios of BZD to APN, and aluminum loadings were considered during the chalcone synthesis procedure. It showed that AlSBA-15-SO₃H exhibited significantly high catalytic activity and selectivity, outperforming the reference catalysts such as sulfuric acid, ZSM-5, and acidic MCM-49. In addition, the catalytic stability and regeneration of AlSBA-15-SO₃H was studied.     

Theoretical studies of argon adsorption in MCM-41 mesoporous systems

Adsorption isotherms are predicted for spherical adsorbates in cylindrical channels of MCM-41 mesoporous materials over a wide range of temperatures by using the “fragment method”. This prediction shows that an equilibrium capillary condensation is impossible for pores with diameters smaller than 2.5 nm. The adsorbate distribution in relatively large pore channels was described by the quasi-chemical approximation (QCA) that takes into account direct pair correlations between interacting molecules. In order to improve the lattice-gas model in the vicinity of the critical point, a calibration function that takes into account information from the fragment method, was introduced into the QCA equations. The influence of the size factor of pores on argon adsorption isotherms was demonstrated.     

Synthesis and characterization of MCM-41 decorated with CuO particles

CuO particles have decorated on the external surface of MCM-41 by in situ introducing cupric nitrate during the hydrothermal synthesis followed by the calcination. The textural and structural properties of CuO/MCM-41 are compared with those of pure MCM-41. The results show that CuO particles are about 40 nm in size and are not agglomerated. The addition of cupric nitrate to the synthesis gel leads to materials with somewhat reduced quality as evidenced from X-ray diffraction patterns and nitrogen adsorption measurements. CuO/MCM-41 is less ordered relative to pure MCM-41 and there are inter-aggregate pores resulting in a higher average pore diameter in the material. The formation of CuO particles on the external surface of MCM-41 and the possible reason for the less ordered structure of CuO/MCM-41 are also discussed in the present paper.