Optical and nonlinear optical characteristics of the Ge and GaAs nanoparticle suspensions prepared by laser ablation

The laser ablation of Ge and GaAs targets placed in water and ethanol was carried out using the fundamental radiation of nanosecond Nd:YLF laser. The results of preparation and the optical and nonlinear optical characterization of the Ge and GaAs nanoparticle suspensions are presented. The considerable shift of the band gap energy of the nanoparticles compared to the bulk semiconductors was observed. The distribution of nanoparticle sizes was estimated in the range of 1.5-10 nm on the basis of the TEM and spectral measurements. The nonlinear refractive indices and nonlinear absorption coefficients of Ge and GaAs nanoparticles were defined by the z-scan technique using second harmonic radiation of picosecond Nd:YAG laser (λ = 532 nm).     

A novel approach for the synthesis of superparamagnetic Mn3O4 nanocrystals by ultrasonic bath

In this study, the synthesis of Mn₃O₄ (husmannite) nanoparticles was carried out in two different alkali media under sonication by ultrasonic bath and conventional method. Manganese acetate was used as precursor, sodium hydroxide and hexamethylenetetramine (HMT) as basic reagents in this synthesis. An ultrasonic bath with low intensity was used for the preparation of nanomaterials. The as prepared samples were characterized with X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, transmission electron microscopy (HRTEM, TEM), energy-dispersive spectrum (EDS), and superconducting quantum interference device (SQUID) analysis. The XRD patterns exhibit the nanocrystals are in pure tetragonal phase. The chemical composition was obtained by EDS analysis and confirmed the presence of Mn and O in the sample. According to the TEM and HRTEM results, both nanorods and nanoparticles of Mn₃O₄ were obtained in the presence of ultrasonic irradiation. The average size of nanoparticles was 10 nm, and the size of nanorods was 12 nm in diameter and 100-900 nm in length for the samples prepared in basic medium with sodium hydroxide. In the conventional method with the same basic medium, the nanorod was not observed and the nearly cubic nanoparticles was appeared with an average size of 2.5 nm. The selected area electron diffraction (SAED) patterns revealed that the nanocrystals are polycrystalline in nature. When HMT was used as a basic reagent in the presence of ultrasonic irradiation, it was led to a higher size of nanoparticles and nanorods than when sodium hydroxide was used as a basic reagent. The average size of nanoparticles was about 15 nm and its shape was nearly cubic. The diameter for nanorods was 50 nm and the length was about a few micrometers.The magnetic measurements were carried out on the sample prepared in sodium hydroxide under ultrasonic irradiation. These measurements as a function of temperature and field strength showed a reduction in ferrimagnetic temperature (T_c = 40 K) as compared to those reported for the bulk (T_c = 43 K). The superparamagnetic behavior was observed at room temperature with no saturation magnetization and hysteresis in the region of measured field strength.     

Fabrication of 550 nm gratings in fused silica by laser induced backside wet etching technique

A series of 550 nm spacing gratings were fabricated in fused silica by laser induced backside wet etching (LIBWE) method using the fourth harmonic of a Q-switched Nd:YAG laser (wavelength: λ = 266 nm; pulse duration: FWHM = 10 ns). During these experiments we used a traditional two-beam interference method: the spatially filtered laser beam was split into two parts, which were interfered at a certain incident angle (2θ = 28°) on the backside surface of the fused silica plate contacting with the liquid absorber (saturated solution of naphthalene-methyl-methacrylate c = 1.85 mol/dm³). We studied the dependence of the quality and the modulation depth of the prepared gratings on the applied laser fluence and the number of laser pulses. The surface of the etched gratings was characterized by atomic force microscope (AFM). The maximum modulation depth was found to be 180-200 nm. Our results proved that the LIBWE procedure is suitable for production of submicrometer sized structures in transparent materials.     

Particulate assisted growth of ZnO nanorods and microrods by pulsed laser deposition

Zinc oxide (ZnO) thin films were deposited on the gallium nitride (GaN) and sapphire (Al₂O₃) substrates by pulsed laser deposition (PLD) without using any metal catalyst. The experiment was carried out at three different laser wavelengths of Nd:YAG laser (λ = 1064 nm, λ = 532 nm) and KrF excimer laser (λ = 248 nm). The ZnO films grown at λ = 532 nm revealed the presence of ZnO nanorods and microrods. The diameter of the rods varies from 250 nm to 2 μm and the length varies between 9 and 22 μm. The scanning electron microscopy (SEM) images of the rods revealed the absence of frozen balls at the tip of the ZnO rods. The growth of ZnO rods has been explained by vapor-solid (V-S) mechanism. The origin of growth of ZnO rods has been attributed to the ejection of micrometric and sub-micrometric sized particulates from the ZnO target. The ZnO films grown at λ = 1064 nm and λ = 248 nm do not show the rod like morphology. X-ray photoelectron spectroscopy (XPS) has not shown the presence of any impurity except zinc and oxygen.     

Spontaneous organisation of ZnS nanoparticles into monocrystalline nanorods with highly enhanced dopant-related emission

A natural self-assembly process of semiconductor nanoparticles leading to the formation of doped, monocrystalline nanorods with highly enhanced dopant-related luminescence properties is reported. ∼4 nm sized, polycrystalline ZnS nanoparticles of zinc-blende (cubic) structure, doped with Cu⁺-Al³⁺ or Mn²⁺ have been aggregated in the aqueous solution and grown into nanorods of length ∼400 nm and aspect ratio ∼12. Transmission electron microscopic (TEM) images indicate crystal growth mechanisms involving both Ostwald-ripening and particle-to-particle oriented-attachment. Sulphur-sulphur catenation is proposed for the covalent-linkage between the attached particles. The nanorods exhibit self-assembly mediated quenching of the lattice defect-related emission accompanied by multifold enhancement in the dopant-related emission. This study demonstrates that the collective behavior of an ensemble of bare nanoparticles, under natural conditions, can lead to the formation of functionalized (doped) nanorods with enhanced luminescence properties.     

Self-assembly of doped semiconductor nanocrystals leading to the formation of highly luminescent nanorods

Meso-scale self-assembly of doped semiconductor nanocrystals leading to the formation of monocrystalline nanorods showing enhanced photo- and electro-luminescence properties are reported. Polycrystalline ZnS: Cu⁺-Al³⁺ nanoparticles of zinc-blended (cubic) structure with an average size of ∼4 nm were aggregated in aqueous solution and grown into nanorods of length ∼400 nm and aspect ratio ∼12. Transmission electron microscope (TEM) images indicate crystal growth mechanisms involving particle-to-particle oriented-attachment assisted by sulphur-sulphur catenation leading to covalent-linkage. The nanorods exhibit self-assembly dependant luminescence properties such as quenching of the lattice defect-related emissions accompanied by enhancement of dopant-related emission, efficient low-voltage electroluminescence (EL) and super-linear voltage-brightness EL characteristics. This study demonstrates the technological importance of aggregation based self-assembly in doped semiconductor nanosystems.     

Controlled synthesis and relationship between luminescent properties and shape/crystal structure of Zn2SiO4:MN phosphor

Mn-doped Zn₂SiO₄ phosphors with different morphology and crystal structure, which show different luminescence and photoluminescence intensity, were synthesized via a low-temperature hydrothermal route without further calcining treatment. As-synthesized zinc silicate nanostructures show green or yellow luminescence depending on their different crystal structure obtained under different preparation conditions. The yellow peak occurring at 575 nm comes from the β-phase zinc silicate, while the green peak centering at 525 nm results from the usual α-phase zinc silicate. From photoluminescence spectra, it is found that Zn₂SiO₄ nanorods have higher photoluminescence intensity than Zn₂SiO₄ nanoparticles. It can be ascribed to reduced surface-damaged region and high crystallinity of nanorods.     

Structural, morphological and photoluminescence properties of W-doped ZnO nanostructures

W-doped ZnO nanostructures were synthesized at substrate temperature of 600 °C by pulsed laser deposition (PLD), from different wt% of WO₃ and ZnO mixed together. The resulting nanostructures have been characterized by X-ray diffraction, scanning electron microscopy, atomic force microscopy and photoluminescence for structural, surface morphology and optical properties as function of W-doping. XRD results show that the films have preferred orientation along a c-axis (0 0 L) plane. We have observed nanorods on all samples, except that W-doped samples show perfectly aligned nanorods. The nanorods exhibit near-band-edge (NBE) ultraviolet (UV) and violet emissions with strong deep-level blue emissions and green emissions at room temperature.     

Photosensitivity of nanocrystalline ZnO films grown by PLD

We have studied the properties of ZnO thin films grown by laser ablation of ZnO targets on (0 0 0 1) sapphire (Al₂O₃), under substrate temperatures around 400 °C. The films were characterized by different methods including X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD) and atomic force microscopy (AFM). XPS analysis revealed that the films are oxygen deficient, and XRD analysis with θ-2θ scans and rocking curves indicate that the ZnO thin films are highly c-axis oriented. All the films are ultraviolet (UV) sensitive. Sensitivity is maximum for the films deposited at lower temperature. The films deposited at higher temperatures show crystallite sizes of typically 500 nm, a high dark current and minimum photoresponse. In all films we observe persistent photoconductivity decay. More densely packed crystallites and a faster decay in photocurrent is observed for films deposited at lower temperature.     

Enhanced near field mediated nanohole fabrication on silicon substrate by femtosecond laser pulse

Investigation of the process of nanohole formation on silicon surface mediated with near electromagnetic field enhancement in vicinity of gold particles is described. Gold nanospheres with diameters of 40, 80 and 200 nm are used. Irradiation of the samples with laser pulse at fluences below the ablation threshold for native Si surface, results in a nanosized surface modification. The nanostructure formation is investigated for the fundamental (λ = 800 nm, 100 fs) and the second harmonic (λ = 400 nm, 250 fs) of the laser radiation generated by ultrashort Ti:sapphire laser system. The near electric field distribution is analyzed by an Finite Difference Time Domain (FDTD) simulation code. The properties of the produced morphological changes on the Si surface are found to depend strongly on the polarization and the wavelength of the laser irradiation. When the laser pulse is linearly polarized the produced nanohole shape is elongated in the E-direction of the polarization. The shape of the hole becomes symmetrical when the laser radiation is circularly polarized. The size of the ablated holes depends on the size of the gold particles, as the smallest holes are produced with the smallest particles. The variation of the laser fluence and the particle size gives possibility of fabricating structures with lateral dimensions ranging from 200 nm to below 40 nm. Explanation of the obtained results is given on the basis simulations of the near field properties using FDTD model and Mie's theory.     

Pulsed laser deposition of fluoride glass thin films

The development of integrated waveguide lasers for different applications such as marking, illumination or medical technology has become highly desirable. Diode pumped planar waveguide lasers emitting in the green visible spectral range, e.g. thin films from praseodymium doped fluorozirconate glass matrix (called ZBLAN, owing to the main components ZrF₄, BaF₂, LaF₃, AlF₃ and NaF) as the active material pumped by a blue laser diode, have aroused great interest. In this work we have investigated the deposition of Pr:ZBLAN thin films using pulsed laser radiation of λ = 193 and λ = 248 nm. The deposition has been carried out on MgF₂ single crystal substrates in a vacuum chamber by varying both processing gas pressure and energy fluence. The existence of an absorption line at 210 nm in Pr:ZBLAN leads to absorption and radiative relaxation of the absorbed laser energy of λ = 193 nm preventing the evaporation of target material. The deposited thin films consist of solidified and molten droplets and irregular particulates only. Furthermore, X-ray radiation has been applied to fluoride glass targets to enhance the absorption in the UV spectral region and to investigate the deposition of X-ray treated targets applying laser radiation of λ = 248 nm. It has been shown that induced F-centres near the target surface are not thermally stable and can be easily ablated. Therefore, λ = 248 nm is not suitable for evaporation of Pr:ZBLAN.     

Growth of Co nanoparticles on a nanostructured θ-Al2O3 film on CoAl(1 0 0)

We have investigated the growth of Co nanoparticles on θ-Al₂O₃/CoAl(1 0 0) by means of Auger electron spectroscopy (AES), high-resolution electron energy loss spectroscopy (EELS), low energy electron diffraction (LEED) and scanning tunneling microscopy (STM). Due to Volmer-Weber growth, Co forms particles with a mean diameter of approximately 2.5 nm and height of 0.8 nm. Even on the entirely covered oxide, there is no Ostwald ripening and Co particles stay structurally isolated. The nanoparticles exhibit a small size distribution and tend to form chains, as predetermined by the streak structure of the oxide template. For sufficient high coverages Co-core-CoO-shell nanoparticles may be evidenced, which is explained as a result of surfactant oxygen. The nanostructured particles may open the door to numerous applications, such as in catalysis and magnetoelectronic applications, where large areas of ordered nanodots are desired.     

Detection of hydrogen with SnO2-coated ZnO nanorods

SnO₂-coated ZnO nanorods on c-plane sapphire substrates were synthesized by pulsed laser deposition. The thickness of the polycrystalline SnO₂ was ∼10 nm, as determined by high-resolution transmission electron microscopy, while the diameter of the ZnO nanorods was ∼30 nm. The sensitivity of the SnO₂/ZnO structures to hydrogen was tested by depositing Ti/Au Ohmic contacts on a random array of the nanorods and measuring the current at fixed voltage. There was no response to 500 ppm H₂ in N₂ at room temperature, but we obtained a sensitivity of ∼70% at 400 °C. The SnO₂/ZnO structures exhibit drift in their recovery characteristics and for sequential detection of hydrogen, as generally reported for SnO₂ thin film sensors.     

Pump-dependent luminescence in the Ag nanoparticles doped by Erbium

A substantial spectral shift of the UV-laser induced luminescence in the Ag nanoparticles (NP) doped by Er³⁺ ions attached to ITO substrates was observed at T = 4.2 K. We have established high energy spectral shift of principal luminescent maxima (from wavelength equal to about 1.45 up to 1.15 μm) with increasing of the pumping nanosecond nitrogen laser power density up to 1.1 GW/cm² operating at λ = 337 nm. With increasing Erbium content with respect to Ag the spectral shift and spectral line broadening increase. It may be caused by specific features of trapping level occupation kinetics on interfaces NP/ITO substrate. The observed process is fully reversible. The luminescence is observed only during excitation by the 337 nm laser pulses and is absent for laser pulses operating at other wavelengths (like excimer laser at 218 nm and nitrogen laser at 371 nm).     

Small size TiO2 nanoparticles prepared by laser ablation in water

Titanium dioxide nanoparticles in distilled H₂O solvent were prepared by laser ablation. The experiments were performed irradiating a Ti target with a second harmonic (532 nm) output of a Nd:YAG laser varying the operative fluence between 1 and 10 J cm⁻² and for an ablation time ranging from 10 to 30 min. Electron microscopy measurements have evidenced the predominant presence of nanoparticles with diameter smaller than 10 nm together with agglomerations of 100-200 nm whose content increases with the laser fluence. At low laser fluence the particles’ size distribution shows that more than 85% of the nanoparticles have a size smaller than 5 nm while at mid and high fluences the presence of 5-7 nm nanoparticles is predominant. XPS analysis has revealed the presence of different titanium suboxide phases with the prevalence of Ti-O bonds from TiO₂ species. The optical bandgap values, determined by UV-vis absorption measurements, are compatible with the anatase phase.     

Non-linear optical properties of silver nanoparticles prepared by hydrogen reduction method

Silver nanoparticles have been prepared using hydrogen gas as the reducing agent for silver nitrate and poly(vinyl pyrrolidone) as the capping agent; the reaction was carried out at 70 °C for 3 h. The size of the nanoparticles was found to be about 20 nm as analyzed using transmission electron micrographs. The X-ray diffraction pattern revealed the face-centered cubic (fcc) structure of silver nanoparticles. The linear absorption of Ag nanoparticles, α, is obtained about 3.71 cm⁻¹. The non-linear refractive indices of silver nanoparticles were defined by the z-scan technique using CW He-Ne laser (λ = 632.8 nm) at different incident intensities. The magnitude of non-linear refractive index (n₂) was measured to be in the order of 10⁻⁷ (cm²/W) with a negative sign. Therefore self-defocusing phenomena is taking placed for Ag nanoparticles.     

Functionalized CdS nanospheres and nanorods

Functionalized nanoparticles are discussed. Surfaces of CdS:Mn/ZnS core/shell nanospheres (Qdots) were converted from hydrophobic to hydrophilic by growth of a SiO₂ shell. The colloidal dispersion was stabilize by adding a surfactant with a negative surface charge, and a cell-penetrating-peptide, TAT, was attached through a primary amine group. The TAT functionalized Qdots were shown to pass the blood-brain-barrier and luminescence in the infused half of the brain.In addition, nanorods of S²⁻ rich CdS were synthesized by reaction of excess S with Cd precursors in the presence of ethylene diamine. The photoluminescence (PL) peak from the S²⁻ rich CdS nanorods was broad with a maximum at ∼710 nm, which was 40 nm longer in wavelength than the PL peak from Cd²⁺ rich CdS (∼670 nm) nanorods. The influence of surface electron or hole trap states on the luminescent pathway of CdS nanorods were used to explain these shifts in wavelength. Nanocrystals of Au with ∼2 nm diameters were grown on S²⁻ rich surfaces of CdS nanorods. Significant quenching of photoluminescence was observed from Au nanocrystals on CdS nanorods due to interfacial charge separation. Charge separation by Au nanocrystals on CdS resulted in enhanced UV photocatalytic degradation of Procion red mix-5B (PRB) dye in aqueous solution.     

Passively Q-switched erbium-doped fiber laser based on gold nanorods

We have demonstrated that the gold nanorods (GNRs) can be used as effective saturable absorbers for passively Q-switched erbium-doped fiber laser (EDFL). Two types of GNRs were synthesized by a seed-mediated growth method. The longitudinal surface plasmon resonance wavelengths of the GNRs with different aspect ratios were around 1068 and 1442 nm, respectively. The GNRs were mixed with sodium carboxymethylcellulose (NaCMC) to form GNRs-NaCMC films with different absorption wavelengths. Using these GNRs-NaCMC films, 9.6-μs pulses with a repetition rate of ∼22.9 kHz and 10.4-μs pulses with a repetition rate of ∼22.4 kHz were obtained from the passively Q-switched EDFLs at a pump power of ∼120 mW, respectively.     

Preparation and characterization of SnO2 nanoparticles using high power pulsed laser

Tin dioxide (SnO₂) nanoparticles having 3 nm size were synthesized by irradiating pure tin metal using high power Nd:YAG laser in deionized water. Formation of nano-SnO₂ crystallites was confirmed by X-ray diffraction (XRD) and AFM study. UV-vis absorption spectral studies showed a peak at 240 nm. FTIR spectrum showed a band in the range of 400-700 cm⁻¹ which was assigned to Sn-O antisymmetric vibrations. Photoluminescence spectrum of synthesized SnO₂ nanoparticles showed peak corresponding to 3.175, 2.901 and 2.613 eV respectively.     

Intra-cavity second harmonic generation with Nd:YVO4/BIBO laser at 542 nm

We report, for the first time, an efficient intra-cavity second-harmonic generation (SHG) at 1084 nm in a nonlinear optical crystal, BiB₃O₆(BIBO) at the direction of (θ, ?) = (170.1°, 90°), performed with a LD end-pumped cw Nd:YVO₄ laser. With 590 mW diode pump power, a continuous-wave (cw) SHG output power of 19 mW at 542 nm yellow-green color has been obtained using a 1.5 mm-thick BIBO crystal. The optical conversion efficiency was 3.22%. It was found that the output wavelength could be 532 nm, 537 nm or 542 nm according to regulating the angle of BIBO.