Study of DNA coated nanoparticles as possible programmable self-assembly building blocks

Nanoparticles coated with single stranded DNA have been shown to efficiently hybridize to targets of complementary DNA. This property might be used to implement programmable (or algorithmic) self-assembly to build nanoparticle structures. However, we argue that a DNA coated nanoparticle by itself cannot be used as a programmable self-assembly building block since it does not have directed bonds. A general scheme for assembling and purifying nanoparticle eight-mers with eight geometrically well-directed bonds is presented together with some preliminary experimental work.     

Fabrication of bismuth telluride nanotubes via a simple solvothermal process

The unique Bi₂Te₃ tubes were obtained via a simple solvothermal reaction in the presence of ethylenediaminetetraacetic acid disodium salt. The product was characterized by X-ray diffraction, scanning electron microscopy and transmission electron microscopy. Bi₂Te₃ nanosheets are vertically grown off the tube wall to form Bi₂Te₃ tubes. A possible formation mechanism is proposed.     

Control of nanogap junction resistance by imposed pulse voltage

The resistance switching effect of a simple gold nanogap junction was investigated. This device exhibits highly reproducible switching and nonvolatile characteristics. The resistance switching was developed for dependence of the resistance on the applied voltage level. Four separate ranges of resistance were repeatedly controlled by programmed sequential application of voltage pulses, including the operation of data verification.     

Titanium-induced germanium nanocones synthesized by vacuum electron-beam evaporation: growth mechanism and morphology evolution

High-vacuum electron-beam evaporation method is used for large area, metal-nucleated germanium (Ge) nanodots and nanocones on Si₃N₄/Si preparation. Nanodot and nanocone arrays with uniform size in bulk-quantity are synthesized using titanium (Ti) nanocrystals as nucleating center at 750 °C with different Ge deposition amount, respectively. The morphology evolution from nanodot to nanocone is studied by atomic force microscopy (AFM). The structure of the prepared sample is characterized by X-ray diffraction (XRD) and Raman scattering. Ge nanocones formed by this convenient fabrication process could have potential applications on nanoelectronics and vacuum electron field emission.     

Magnetic properties of self-assembled nanostructure films on the base of amorphous Ni granules

We report on structural and magnetic properties of granular films consisting of 2.5 nm Ni nanoparticles. The films are fabricated by the original laser electrodispersion technique, which allows producing nearly monodisperse and amorphous particles. Atomic force microscopy (AFM) study shows that in 8 nm thickness films the particles are self-assembled in clusters with the lateral size 100-150 nm and the height of about 8 nm. Performed by SQUID, the films magnetization measurements reveal superparamagnetic behaviour, characteristic for an ensemble of non-interacting single domain magnetic particulates. It is found that the magnetic moment of the particulate is equal to that of about 3000 individual Ni nanoparticles and the blocking temperature is close to room temperature. Defined from magnetic measurements, the size of single domain particulates correlates well with the size of the clusters determined from AFM images. We propose that exchange interaction plays an important role in the formation of the particulates by aligning the magnetic moments of the individual Ni nanoparticles inside the clusters. Presence of magnetic clusters with high blocking temperature makes the fabricated films potentially useful for high-density magnetic data storage applications.     

Electroless synthesis of large scale Co-Zn-P nanowire arrays and the magnetic behaviour

Co-Zn-P nanowire arrays have been synthesized by electroless deposition in an anodic alumina membrane (AAM). The images of Co-Zn-P nanowire arrays and single nanowires are obtained by both scanning electron microscope (SEM) and transmission electron microscope (TEM), respectively. Selected area electron diffraction (SAED), X-ray diffraction (XRD) and energy dispersive spectra (EDS) are employed to study the morphology and chemical composition of the nanowires. The results indicate that Co-Zn-P nanowire arrays are amorphous in structure. The hysteresis loops characterized by a vibrating sample magnetometer (VSM) show that the easily magnetized direction of Co-Zn-P nanowire arrays is parallel to the nanowire arrays and that there exhibits clearly a magnetic anisotropy as a result of the shape anisotropy.     

Synthesis of ZnS nanorods by annealing precursor ZnS nanoparticles in NaCl flux

ZnS nanorods were fabricated by annealing precursor ZnS nanoparticles, which were prepared by one-step, solid-state reaction of ZnCl₂ and Na₂S through grinding by hand at ambient temperature, in NaCl flux. The as-prepared ZnS nanorods have diameters of 40-80 nm, and lengths up to several micrometers. The structural features and chemical composition of the nanorods were investigated by X-ray diffraction (XRD), transmission electron microscopy (TEM), selected area electron diffraction (SAED), high-resolution transmission electron microscopy (HRTEM), and Raman spectra.     

Fabrication of ZnO nanostructures of various dimensions using patterned substrates

ZnO nanostructures were grown on silicon, porous silicon, ZnO/Si and AlN/Si substrates by low-temperature aqueous synthesis method. The shape of nanostructures greatly depends on the underlying surface. Scattered ZnO nanorods were observed on silicon substrate, whereas aligned ZnO nanowires were obtained by introducing sputtered ZnO film as a seed layer. Furthermore, both the combination of nanorods and the bunch of nanowires were found on porous silicon substrates, whereas platelet-like morphology was observed on AlN/Si substrates. XRD patterns suggest the crystalline nature of aqueous-grown ZnO nanostructures and high-resolution transmission electron microscopy images confirm the single-crystalline growth of the ZnO nanorods along [0 0 1] direction. Room-temperature photoluminescence characterization clearly shows a band-edge luminescence along with a visible luminescence in the yellow spectral range.     

Fabrication of a complex InAs ring-and-dot structure by droplet epitaxy

An InAs ring structure accompanying the formation of quantum dots (QDs) was fabricated on (1 0 0)GaAs using droplet epitaxy. The QDs were located in the vicinity of the ring, due to the diffusion of In atoms from the In droplets. In addition, the dots were found to have distributed elliptically and preferentially along the [0 1 1] direction, implying that In itself prefers to diffuse along the [0 1 1] direction, which is the opposite of the favorable diffusion orientation of group III atoms on (1 0 0)GaAs under a commonly used As-stabilized growth condition. This is the first observation of a ring structure accompanying the formation of quantum dots in droplet epitaxy.     

Post-treatment of mesoporous material with high temperature for synthesis super-microporous materials with enhanced hydrothermal stability

Super-microporous silicon material with high hydrothermal stability denoted as MCM-48-T has been prepared from mesoporous MCM-48 by high temperature treatment. The structural and chemical property of MCM-48-T has been characterized by variety of techniques such as small-angle X-ray diffraction (XRD), transmission electron microscopy (TEM), N₂ adsorption-desorption, infrared spectroscopy (IR) and ²⁹Si MAS NMR, etc. The results showed that Si-OH groups are forced to condense by the treatment of high temperature and the pore size of MCM-48-T is around 1.03 nm in the super-microporous range. Besides, the ratio of Q⁴/Q³ increases considerably. Compared with the original material (MCM-48), the hydrothermal stability of MCM-48-T has significantly enhanced.     

Hydrothermal preparation of one-dimensional assemblies of PbS nanoparticles

The preparation of one-dimensional assemblies of PbS nanoparticles is described. By treating the suspension of PbCl₂ powders in aqueous thioacetamide solution at 120 °C for 18 h, PbS nanoparticles were synthesized in regular chain-like patterns. The particles were less than 100 nm in sizes, and were organized into micron-length assemblies. The starting agents have much influence on the morphology of the products. The possible growth mechanism is also discussed.     

Magnetic molecular nanostructures: Design of magnetic molecular materials as monolayers, multilayers and thin films

In this paper we summarize the importance and versatility of the molecular approach in the design and development of novel magnetic molecular materials. These materials processing, in order to obtain controlled molecular structures at the nanoscale, will also be remarked.     

Iron oxide nanoparticles supported on ultradispersed diamond powders: Effect of the preparation procedure

The state of the iron oxide nanoparticles, supported on ultradispersed diamond (UDD) powders is studied by X-ray diffraction, nitrogen physisorption, temperature-programmed reduction, FTIR and Mössbauer spectroscopy. Methanol decomposition to hydrogen and CO is used as a catalytic test. The peculiarities of the iron oxide species strongly depend on the detonation procedure used for the UDD powders preparation as well as on the iron modification procedure.     

Lateral growth of aligned mutilwalled carbon nanotubes under electric field

In this work we report laterally aligned multi-walled carbon nanotube (MWNT) by an electric field during growth. The MWNTs were selectively grown between lateral sides of the catalytic metals on predefined electrodes by chemical-vapor deposition. The electric field distribution for various geometries was simulated using Maxwell 2D simulation in order to realize better alignment of laterally grown carbon nanotubes (CNTs). The experimental results show that the electric field direction at the vicinity of catalyst and nanotubes-substrate interactions are principal factor in aligning CNTs laterally.     

Synthesis and gas sensing characteristic based on metal oxide modification multi wall carbon nanotube composites

A new type of gas sensing material based on metal oxide modification multi wall carbon nanotube (MO/MWCNT) composites is presented since the interface between the composites enhance the carrier density so as to improve the gas sensitivity. Three kinds of MO/MWCNT composite materials, such as ZnO/MWCNT, SnO₂/MWCNT and TiO₂/MWCNT, have been acquired in situ growth using catalytic pyrolysis method. The MO nano particles have decorated on side of MWCNTs, whereas the introduction of SnO₂ nano particles makes part of MWCNT showing two-dimensional form of carbon nano-wall structure. Among four kinds of cathode of ZnO/MWCNTs, SnO₂/MWCNTs, TiO₂/MWCNTs and pure MWCNT composite film, TiO₂/MWCNTs composite has the lowest threshold electric field required to draw current of 12 μA has been found to be ∼1.2 V/μm, and also TiO₂/MWCNTs composite has the highest sensitivity of 16% to ethanol. The TiO₂/MWCNTs composite is superior to the others both in vacuum electron transportation and gas sensitivity.     

Low-temperature preparation of F-doped TiO2 film and its photocatalytic activity under solar light

A novel and simple method for preparing F-doped anatase TiO₂ (defined as FTO) film with high photocatalytic activity was developed using titanium-n-butoxide and NH₄F as TiO₂ and fluorine precursors under mild condition, i.e. low temperature (lower than 373 K) and ambient pressure. The prepared samples were characterized by XRD, SEM, X-ray photoelectron spectroscopy (XPS), diffuse reflectance spectrum (DRS), photoluminescence spectrum (PL) and TG-DSC analysis. The photocatalytic activity was evaluated by decomposing X-3B under artificial solar light. The results showed that the crystallinity of TiO₂ was improved by F-doping. F⁻ ions can prevent the grain growth, and the transformation of anatase to rutile phase was also inhibited. The doped fluorine atoms existed in two chemical forms, and the ones incorporated into TiO₂ lattice might take a positive role in photocatalysis. Compared with surface fluorination samples, FTO film exhibited better photocatalytic activity. The high photocatalytic activity of FTO may due to extrinsic absorption through the creation of oxygen vacancies rather than the excitation of the intrinsic absorption band of bulk TiO₂. Furthermore, the FTO can be recycled with little photocatalytic activity depression. Without any further treatment besides rinsing, after 6 recycle utilization, the photocatalytic activity of FTO film was still higher than 79%.     

Effect of substrate bias voltages on the diffusion barrier properties of Zr-N films in Cu metallization

Zr-N diffusion barriers were deposited on the Si substrates by rf reactive magnetron sputtering under various substrate bias voltages. Cu films were subsequently sputtered onto the Zr-N films by dc pulse magnetron sputtering without breaking vacuum. The Cu/Zr-N/Si specimens were then annealed up to 650 °C in N₂ ambient for an hour. The effects of deposition bias on growth rate, film resistivity, microstructure, and diffusion barrier properties of Zr-N films were investigated. An increase in negative substrate bias resulted in a decrease in deposition rate together with a decrease in resistivity. It was found that the sheet resistances of Cu/Zr-N(−200 V)/Si contact system were lower than those of Cu/Zr-N(−50 V)/Si specimens after annealing at 650 °C. Cu/Zr-N(−200 V)/Si contact systems showed better thermal stability so that the Cu₃Si phase could not be detected.     

Functionalization of magnetic nanoparticles with 3-aminopropyl silane

Superparamagnetic maghemite nanoparticles were functionalized with 3-aminopropyl triethoxy silane (APS). The influence of the different experimental parameters (temperature, pH, and reactant concentration) on the efficiency of the APS bonding directly to the maghemite nanoparticles or after their coating with a thin layer of silica was systematically studied. The functionalization was followed with measurements of the ζ-potential and direct measurements of the surface APS concentration on the nanoparticles. The surface concentration of the APS was much higher in the case when the APS was bonded to the silica-coated nanoparticles compared to bonding directly to the surfaces of the iron-oxide nanoparticles.     

Fabrication of magnetic composite nanofibers of poly(ε-caprolactone) with FePt nanoparticles by coaxial electrospinning

In this article, composite nanofibers of poly(ε-caprolactone) (PCL) with iron–platinum (FePt) nanoparticles were successfully fabricated via coaxial electrospinning. The structure and morphology of FePt/PCL composite nanofibers were observed using transmission electron microscope and scanning electron microscope, respectively. The magnetic behavior of FePt/PCL composite nanofibers was investigated by alternating gradient magnetometer at room temperature.     

Influence of cetyltrimethylammonium bromide on the morphology of AWO4 (A = Ca, Sr) prepared by cyclic microwave irradiation

AWO₄ (A = Ca, Sr) was prepared from metal salts [Ca(NO₃)₂·4H₂O or Sr(NO₃)₂], Na₂WO₄·2H₂O and different moles of cetyltrimethylammonium bromide (CTAB) in water by cyclic microwave irradiation. The structure of AWO₄ was characterized by X-ray diffraction (XRD) and selected area electron diffraction (SAED). Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) revealed the presence of nanoparticles in clusters with different morphologies; spheres, peaches with notches, dumb-bells and bundles, influenced by CTAB. Six Raman vibrational peaks of scheelite structure were detected at 908, 835, 793, 399, 332 and 210 cm⁻¹ for CaWO₄ and 917, 833, 795, 372, 336 and 192 cm⁻¹ for SrWO₄, which are assigned as ν₁(A_g), ν₃(B_g), ν₃(E_g), ν₄(B_g), ν₂(A_g) and ν_f.r.(A_g), respectively. Fourier transform infrared (FTIR) spectra provided the evidence of W-O stretching vibration in [WO₄]²⁻ tetrahedrons at 793 cm⁻¹ for CaWO₄ and 807 cm⁻¹ for SrWO₄. The peaks of photoluminescence (PL) spectra were at 428-434 nm for CaWO₄, and 447-451 nm for SrWO₄.