Nonlinear optical properties of Au/ZnO nanoparticle arrays

The triangular-shaped Au/ZnO nanoparticle arrays were fabricated on fused quartz substrate using nanosphere lithography. The structural characterization of the Au/ZnO nanoparticle arrays was investigated by atomic force microscopy. The absorption peak due to the surface plasmon resonance of Au particles at the wavelength of about 570 nm was observed. The nonlinear optical properties of the nanoparticle arrays were measured using the z-scan method at a wavelength of 532 nm with pulse duration of 10 ns. The real and imaginary part of third-order nonlinear optical susceptibility, Re χ⁽³⁾ and Im χ⁽³⁾, were determined to be 1.15 × 10⁻⁶ and −5.36 × 10⁻⁷ esu, respectively. The results show that the Au/ZnO nanoparticle arrays have great potential for future optical devices.     

Femtosecond Z-scan measurement of third-order optical nonlinearities in anatase TiO2 thin films

Anatase phase TiO₂ films have been grown on fused silica substrate by pulsed laser deposition technique at substrate temperature of 750 °C under the oxygen pressure of 5 Pa. From the transmission spectra, the optical band gap and linear refractive index of the TiO₂ films were determined. The third-order optical nonlinearities of the films were measured by Z-scan method using a femtosecond laser (50 fs) at the wavelength of 800 nm. The real and imaginary parts of third-order nonlinear susceptibility χ⁽³⁾ were determined to be −7.1 × 10⁻¹¹esu and −4.42 × 10⁻¹²esu, respectively. The figure of merit, T, defined by T=βλ/n₂, was calculated to be 0.8, which meets the requirement of all-optical switching devices. The results show that the anatase TiO₂ films have great potential applications for nonlinear optical devices.     

Third-order optical nonlinearity of (Ba0.7Sr0.3)TiO3 ferroelectric thin films fabricated by soft solution processing

(Ba_0.7Sr_0.3)TiO₃ (BST) ferroelectric thin films with perovskite crystal structure were fabricated by soft solution processing on a quartz substrate. The third-order nonlinear optical properties were investigated by using Z-scan technique. Positive nonlinear refractive index and nonlinear absorption coefficient were determined to be 4×10⁻⁷ esu and 1.2×10⁻⁶ m/w, respectively. The real part and imaginary part of third-order optical nonlinear susceptibility were calculated and the values were 6.43×10⁻⁸ and 5.14×10⁻⁸ esu, respectively. All of these results show ferroelectric BST thin film is promising for applications in nonlinear optical devices.     

Anisotropic nonlinear optical absorption of gold nanorods in a silica matrix

Nanocomposite films consisting of gold nanospheres or gold nanorods embedded in a silica matrix have been prepared using a hybrid deposition technique consisting of plasma-enhanced chemical vapor deposition of SiO₂ and co-sputtering of gold, followed by annealing at 900 °C. Subsequent irradiation with 30 MeV heavy ions (Cu⁵⁺) was used to form gold nanorods. Linear and nonlinear optical properties of this material are closely related with the surface plasmon resonance in the visible. The nonlinear absorption coefficient (α₂@532 nm) for the films containing gold nanospheres was measured by Z-scan and P-scan techniques, and it was found to be isotropic and equal to −4.8 × 10⁻² cm/W. On the contrary, gold nanorods films exhibited two distinct surface plasmon resonance absorption bands giving rise to a strong anisotropic behavior, namely a polarization-dependent linear absorption and saturable absorption. Z-scan and P-scan measurements using various light polarization directions yielded nonlinear absorption coefficient (α₂@532 nm) values varying from −0.9 × 10⁻² cm/W up to −3.0 × 10⁻² cm/W. Linearity of the P-scan method in the context of nanocomposite saturable absorption is also discussed.     

Fabrication of PECVD-grown fluorinated hydrocarbon nanoparticles and circular nanoring arrays using nanosphere lithography

Nanosphere lithography (NSL) masks were created by spin-coating of polystyrene particles onto silicon surfaces. Fluorinated hydrocarbon films were coated on the nanosphere lithography masks using plasma-enhanced chemical vapor deposition (PECVD) to obtain ordered arrays of fluorinated hydrocarbon. Atomic force microscope images show hexagonally ordered nanodots of dimension 225 ± 11 nm with a height of 23 ± 4 nm. Every hexagon encloses a circular ring of diameter 540 ± 24 nm having a height and width of 13.5 ± 0.6 nm and 203 ± 16 nm, respectively. FTIR analysis shows two distinct zones of atomic bonding of CH_x and CF_x in the plasma coated ordered fluorinated hydrocarbon films.     

Growth and spectral properties of Nd:GdVO4 laser crystal

In this paper, the Czochralski growth, absorption spectra, and photoluminescence spectra of Nd:GdVO₄ crystals are studied. From its absorption spectra, Nd:GdVO₄ is found to exhibit an anisotropic optical absorption effect, and its effective Judd-Ofelt parameters are calculated: Ω₂=10.281×10⁻²⁰ cm², Ω₄=5.426×10⁻²⁰ cm² and Ω₆=9.943×10⁻²⁰ cm². By these parameters, the absorption oscillator strengths, emission oscillator strengths, transition probabilities, fluorescence branch ratios, energy lifetimes, and integrated emission cross-sections are also derived. The photoluminescence spectra of Nd:GdVO₄ crystal consist of a wide emission band of host and the characteristic emission bands of Nd³⁺. Based on the excitation spectrum, both the two evident peaks locating at 345 and 371 nm are ascribed to the characteristic excitation of Nd³⁺, and an energy transfer from the host to its doping Nd³⁺ ions is indicated.     

EDXRF measurements on gold diffusion-doped Bi1.8Pb0.35Sr1.9Ca2.1Cu3Oy

Gold (Au) diffusion in superconducting Bi_1.8Pb_0.35Sr_1.9Ca_2.1Cu₃O_y was investigated over the temperature range 500-800 °C by the energy dispersive X-ray fluorescence (EDXRF) technique. It is found that the Au diffusion coefficient decreases as the diffusion-annealing temperature decreases. The temperature dependences of Au diffusion coefficient in grains and over grain boundaries are described by the relations D₁=6.7×10⁻⁵exp(−1.19 eV/k_BT) and D₂=9.7×10⁻⁴exp(−1.09 eV/k_BT), respectively. The diffusion doping of Bi-2223 by Au causes a significant increase of the lattice parameter c by about 0.19%. For the Au-diffused samples, dc electrical resistivity and transport critical current density measurements indicated the critical transition temperature increased from 100 to 104 K and the critical current density increased from 40 to 125 A cm⁻², in comparison with those of undoped samples. From scanning electron microscope (SEM) and X-ray diffraction (XRD) measurements it is observed that Au doping of the sample also improved the surface morphology and increased the ratio of the high-T_c phase to the low-T_c phase. The possible reasons for the observed improvement in microstructure and superconducting properties of the samples due to Au diffusion are also discussed.     

Spectral properties of Nd:Ca2Nb2O7 crystal

This paper reports the spectral properties of Nd³⁺:Ca₂Nb₂O₇. The spectral parameters of Nd³⁺ in Nd³⁺:Ca₂Nb₂O₇ crystal have been investigated based on Judd-Ofelt theory. The spectral parameters were obtained. The parameters of line strengths Ω_λ are Ω₂=4.967×10⁻²⁰ cm², Ω₄=5.431×10⁻²⁰ cm², Ω₆=5.693×10⁻²⁰ cm². The radiative lifetime, the fluorescence lifetime and the quantum efficiency are 122 μs, 103 μs and 84.4%, respectively. The fluorescence branch ratios calculated: β₁=0.425, β₂=0.479, β₃=0.091, β₄=0.004. The emission cross section at 1068 nm is 6.204×10⁻²⁰ cm².     

Organic thin films based on a dicyanovinyl-quaterthiophene: Influence of electrode configuration on third-order nonlinear optical properties measured by electroabsorption spectroscopy

Electroabsorption (EA) studies at room temperature on organic thin films based on a dicyanovinyl-quaterthiophene 4T-V(CN)₂ are reported. An electric field modulation is applied to the samples for two different electrode geometries, i.e. sandwich and coplanar versus the organic layer. Changes in optical absorption coefficient of 4T-V(CN)₂ based thin films are measured and analyzed to determine the character of the optical transition in the visible range (400-800 nm). Depending on the experimental electrode configuration, magnitude of electroabsorption responses are different, possibly due to different distribution of the externally applied electric field. The results indicate a higher resolution of EA response for the sandwich electrode configuration and confirm the charge transfer exciton character of 4T-V(CN)₂ in contrast to the unsubstituted quaterthiophene 4T. Finally, a third-order nonlinear susceptibility χ⁽³⁾ (−ω; ω, 0, 0) of 16 × 10⁻¹² e.s.u. is obtained.     

Nonlinear optical properties in SrTiO3 thin films by pulsed laser deposition

Well-crystallized 250 nm-thick SrTiO₃ thin films on fused-quartz substrate were prepared by pulsed laser deposition. The band-gap of SrTiO₃ thin film by transmittance spectra is equal to 3.50 eV, larger than 3.22 eV for the bulk crystal. The nonlinear optical properties of the films were examined with picosecond pulses at 1.064 μm excitation. A large two-photon absorption (TPA) with absorption coefficient of 87.7 cm/GW was obtained, larger than 51.7 cm/GW for BaTiO₃ thin films. The nonlinear refractive index n₂ is equal to 5.7×10⁻¹⁰ esu with a negative sign, larger than 0.267×10⁻¹¹ esu for bulk SrTiO₃. The large TPA is attributed to intermediate energy levels introduced by the grain boundaries, and the optical limiting behaviors stemming from both TPA and negative nonlinear refraction were also discussed.     

Refractive index, oscillator parameters and temperature-tuned energy band gap of Tl4In3GaS8-layered single crystals

Transmission and reflection measurements in the wavelength region 450-1100 nm were carried out on Tl₄In₃GaS₈-layered single crystals. The analysis of the room temperature absorption data revealed the presence of both optical indirect and direct transitions with band gap energies of 2.32 and 2.52 eV, respectively. The rate of change of the indirect band gap with temperature dE_gi/dT=-6.0×10⁻⁴ eV/K was determined from transmission measurements in the temperature range of 10-300 K. The absolute zero value of the band gap energy was obtained as E_gi(0)=2.44 eV. The dispersion of the refractive index is discussed in terms of the Wemple-DiDomenico single-effective-oscillator model. The refractive index dispersion parameters: oscillator energy, dispersion energy, oscillator strength and zero-frequency refractive index were found to be 4.87 eV, 26.77 eV, 8.48×10¹³ m⁻² and 2.55, respectively.     

Third-order optical nonlinearities of lead-free (Na1−xKx)0.5Bi0.5TiO3 thin films

(Na_1−xK_x)_0.5Bi_0.5TiO₃ (NKBT) (x = 0.1, 0.2, and 0.3) thin films with good surface morphology and rhombohedral perovskite structure were fabricated on quartz substrates by a sol-gel process. The fundamental optical constants (the band gaps, linear refractive indices and absorption coefficients) of the films were obtained through optical transmittance measurements. The nonlinear optical properties were investigated by Z-scan technique performed at 532 nm with a picosecond laser. A two-photon absorption effect closely related with potassium-doping content was found in thin films, and the nonlinear refractive index n₂ increases evidently with potassium-doping. The real part of the third-order nonlinear susceptibility χ⁽³⁾ is much larger than its imaginary part, indicating that the third-order optical nonlinear response of the NKBT films is dominated by the optical nonlinear refractive behavior. These results show that NKBT thin films have potential applications in nonlinear optics.     

Nonlinear optical properties and photoinduced anisotropy of an azobenzene ionic liquid-crystalline polymer

The nonlinear optical properties and photoinduced anisotropy of an azobenzene ionic liquid-crystalline polymer were investigated. The single beam Z-scan measurement showed the polymer film possessed a value of nonlinear refractive index n₂ = −1.07 × 10⁻⁹ cm²/W under a picosecond 532 nm excitation. Photoinduced anisotropy in the polymer was studied through dichroism and photoinduced birefringence. A photoinduced birefringence value Δn ∼ 10⁻² was achieved in the polymer film. The mechanism for the nonlinear optical response and the physical process of photoinduced anisotropy in the polymer were discussed.     

Synthesis, microstructure and photoluminescence of Eu/Tb activated Y2SiO5 nanophosphors by new silicate sources

Y_2−xTb_xSiO₅ and Y_2−xEu_xSiO₅ nanophosphors with seven different kinds of silicate sources were synthesized by sol-gel method. The structures have been investigated to be composed of nanometer-size grains of 30-60 nm through X-ray diffraction (XRD) and scanning electron microscopy (SEM) was used to compare the different morphology of patterns from seven different silicon sources. The photoluminescence of Y_2−xTb_xSiO₅ was investigated as a function of silicate sources and the results revealed that these nanometer materials showed the characteristic emission ⁵D₄ → ⁷F_J (J = 6, 5, 4, 3) of Tb ions. The characteristic emission ⁵D₀ → ⁷F_J (J = 1, 2, 4) of Eu ions was also found in the materials of Y_2−xEu_xSiO₅.     

Single beam Z-scan measurement of the third order optical nonlinearities of styryl7 dye

The optical nonlinearity of styryl7 dye in ethanol solution at different concentrations has been studied using pulsed Nd:YAG laser at 532 nm as the source of excitation. The optical responses were characterized by measuring the intensity dependent refractive index (n₂) of the medium using the Z-scan technique. The open aperture Z-scan trace of the dye in solution displayed saturable absorption. The closed aperture Z-scan trace of the dye exhibited a negative nonlinearity. The styryl7 dye at 1 mM concentration exhibited nonlinear refractive co-efficient n₂ = −1.24 × 10⁻⁸ cm²/W, nonlinear absorption coefficient β = − 3.9 × 10⁻⁴ cm/W and real and imaginary parts of third-order nonlinear optical susceptibility χ³ = 3.26 × 10⁻⁶ esu in ethanol. These results showed that the dye has potential application in nonlinear optics.     

Method for measurements of second-order nonlinear optical coefficient based on Z-scan

The method for measuring second-order nonlinear optical coefficients based on well-known Z-scan is presented. The influence of linear absorption coefficients on normalized transmittance is discussed. Using this method, we obtained the second-order nonlinear coefficient d₃₁(5%MgO:LiNbO₃) = 4.5 × 10⁻¹² m/v at 1064 nm, which agrees well with theoretical calculations and previous well-known values.     

Strong nonlinear optical refractive effect of self-assembled multilayer films containing tetrasulfonated iron phthalocyanine

Multilayer films containing anionic iron phthalocyanine tetrasulfonate (FePcTsNa₄) and cationic poly(diallydimethyl ammonium chloride) were prepared using electrostatic self-assembled layer-by-layer technique. The growth of the film was monitored by ultraviolet-visible absorption spectroscopy, and the morphology of the film was characterized by atomic force microscopy. Polarized visible spectra showed that macrocycles of FePcTsNa₄ in the film presented a flat orientation relative to the plane of the solid substrates. The third-order nonlinear optical properties of the film were studied by using Z-scan technique with laser duration of 21 ps at the wavelength of 532 nm. The FePcTsNa₄/PDDA film exhibited strong self-focusing effect with n₂ value of 4.13 × 10⁻¹⁵ m²/W, which is 4 orders larger than that of FePcTsNa₄ aqueous solution.     

Influence of B2O3 to the inhomogeneous broadening and spectroscopic properties of Er/Yb codoped fluorophosphate glasses

In a three-components fluorophosphate glass system, the introduction of H₃BO₃ brings some valuable influence to the spectroscopic and thermal properties of the glasses. With H₃BO₃ increases from 2 to 20 mol%, Ω₆, S_ed4I13/2, FWHM, T_g and fluorescence lifetime change from 3.21×10⁻²⁰ cm², 1.77×10⁻²⁰ cm², 45 nm, 480 °C and 8.8 ms to 4.66×10⁻²⁰ cm², 2.11×10⁻²⁰ cm², 50 nm, 541 °C and 7.4 ms, respectively. σ_abs, σ_emi, FWHM×τ_f×σ_emi has a maximum when H₃BO₃ is 11 mol%. T_g and T_x−T_g increases with H₃BO₃ introduction. Results showed that in fluorophosphate glasses, proper amount of B₂O₃ can be used as a modifier to suppress upconversion and improve spectroscopic properties, broadband property and crystallization stability of the glasses while keeps the fluorescence lifetime relatively high.     

Spectroscopic investigations of Nd-, Er-, Er/Yb-, and Tm-ions doped SiO2-Al2O3-CaF2-GdF3 glasses

This paper reports on the absorption, visible and near-infrared luminescence properties of Nd³⁺, Er³⁺, Er³⁺/2Yb³⁺, and Tm³⁺ doped oxyfluoride aluminosilicate glasses. From the measured absorption spectra, Judd-Ofelt (J-O) intensity parameters (Ω₂, Ω₄ and Ω₆) have been calculated for all the studied ions. Decay lifetime curves were measured for the visible emissions of Er³⁺ (558 nm, green), and Tm³⁺ (650 and 795 nm), respectively. The near infrared emission spectrum of Nd³⁺ doped glass has shown full width at half maximum (FWHM) around 45 nm (for the ⁴F_3/2→⁴I_9/2 transition), 45 nm (for the ⁴F_3/2→⁴I_11/2 transition), and 60 nm (for the ⁴F_3/2→⁴I_13/2 transition), respectively, with 800 nm laser diode (LD) excitation. For Er³⁺, and Er³⁺/2Yb³⁺ co-doped glasses, the characteristic near infrared emission bands were spectrally centered at 1532 and 1544 nm, respectively, with 980 nm laser diode excitation, exhibiting full width at half maximum around 50 and 90 nm for the erbium ⁴I_13/2→⁴I_15/2 transition. The measured maximum decay times of ⁴I_13/2→⁴I_15/2 transition (at wavelength 1532 and 1544 nm) are about 5.280 and 5.719 ms for 1Er³⁺ and 1Er³⁺/2Yb³⁺ (mol%) co-doped glasses, respectively. The maximum stimulated emission cross sections for ⁴I_13/2→⁴I_15/2 transition of Er³⁺ and Er³⁺/Yb³⁺ are 10.81×10⁻²¹ and 5.723×10^-21 cm². These glasses with better thermal stability, bright visible emissions and broad near-infrared emissions should have potential applications in broadly tunable laser sources, interesting optical luminescent materials and broadband optical amplification at low-loss telecommunication windows.     

On a possible variation of the proton-to-electron mass ratio: H2 spectra in the line of sight of high-redshift quasars and in the laboratory

Recently the finding of an indication for a decrease of the proton-to-electron mass ratio μ = m_p/m_e by 0.002% in the past 12 billion years was reported in the form of a Letter [E. Reinhold, R. Buning, U. Hollenstein, P. Petitjean, A. Ivanchik, W. Ubachs, Phys. Rev. Lett. 96 (2006) 151101]. Here we will further detail the methods that led to that result and put it in perspective. Laser spectroscopy on molecular hydrogen, using a narrow-band and tunable extreme ultraviolet laser system at the Laser Centre Vrije Universiteit Amsterdam, results in transition wavelengths of spectral lines in the Lyman and Werner band systems at an accuracy of (4-11) × 10⁻⁸, depending on the wavelength region. This corresponds to an absolute accuracy of 0.000004-0.000010 nm. A database of 233 accurately calibrated H₂ lines is presented here for future reference and comparison with astronomical observations. Recent observations of the same spectroscopic features in cold hydrogen clouds at redshifts z = 2.5947325 and z = 3.0248970 in the line of sight of two quasar light sources (Q 0405−443 and Q 0347−383) resulted in 76 reliably determined transition wavelengths of H₂ lines at accuracies in the range 2 × 10⁻⁷ to 1 × 10⁻⁶. Those observations were performed with the Ultraviolet and Visible Echelle Spectrograph at the Very Large Telescope of the European Southern Observatory at Paranal, Chile. A third ingredient in the analysis is the calculation of an improved set of sensitivity coefficients K_i, a parameter associated with each spectral line, representing the dependence of the transition wavelength on a possible variation of the proton-to-electron mass ratio μ. The new model for calculation of the K_i sensitivity coefficients is based on a Dunham representation of ground state and excited state level energies, derived from the most accurate data available in literature for the ground electronic state and the presently determined level energies in the and C¹Π_u states. Moreover, the model includes adiabatic corrections to electronic energies as well as local perturbation effects between B and C levels. The full analysis and a tabulation of the resulting K_i coefficients is given in this paper. A statistical analysis of the data yields an indication for a variation of the proton-to-electron mass ratio of Δμ/μ = (2.45 ± 0.59) × 10⁻⁵ for a weighted fit and Δμ/μ = (1.99 ± 0.58) × 10⁻⁵ for an unweighted fit. This result, indicating the decrease of μ, has a statistical significance of 3.5σ. Mass-variations as discussed relate to inertial or kinematic masses, rather than gravitational masses. Separate treatment of the data gives a similar positive result for each of the quasars Q 0405−443 and Q 0347−383. The statistical analysis is further documented and possible systematic shifts underlying the data, with the possibility of mimicking a non-zero Δμ/μ value, are discussed. The observed decrease in μ corresponds to a rate of change of d lnμ/dt = −2 × 10⁻¹⁵ per year, if a linear variation with time is assumed. Experiments for detecting a possible variation of μ in the modern epoch via ultra-precision experiments on H₂ quadrupole transitions are proposed.