Adsorption in cylindrical pores: Mixed lattice-site/off-site Monte Carlo simulations in pores with heterogeneous wall structure

We present results of grand canonical Monte Carlo simulations of adsorption in cylindrical pores with rough surface modeled by lattice-site approach. Each site is characterized by two parameters: structural and energetic, which locally modify the structure and energy properties of the surface. There are three types of sites, randomly distributed over the wall: attractive, neutral and repulsive with respect to the smooth pore model. The results presented here show how this model affects the mechanism of adsorption and how it changes the forms of adsorption isotherm. We compare our numerical results with the experimental data of adsorption of a simple fluid (CH₄, T = 77 K) in cylindrical silica pore of diameter d = 4 nm (MCM-41 material).     

Attenuated total reflectance spectroscopy of coumarin organosilane molecules adsorbed on a fused silica surface

Attenuated total reflectance (ATR) spectroscopy was used to investigate the adsorption of coumarin organosilane molecules onto a fused silica surface. The difference between the absorption spectra of the molecules on the surface and in solution was explained by the interaction of the adsorbed coumarin organosilane molecules with the hydroxyl groups on the fused silica surface. This interaction produces a perturbation of the π electron distribution and the electronic transitions of the coumarin chromophore of the organosilane molecules adsorbed on the surface. From the kinetics adsorption curves, the calculated enthalpy values of 74.8 ± 5.2 kJ mol⁻¹ and free energy of −38.22 ± 0.70 kJ mol⁻¹ at 23 °C indicates a chemisorption process. The high sensitivity of ATR spectroscopy allows the detection of a monolayer formed by a 10 nM concentration of coumarin organosilane molecules, which covers more than half of the maximum surface coverage at 60 °C.     

The structure of n-alkane binary mixtures adsorbed on graphite

The thermodynamics and structure of the surface adsorbed phase in binary C15-C16 and C15-C17 n-alkane mixtures confined in graphite pores have been studied by differential scanning calorimetry and small-angle X-ray scattering. The previously observed selective adsorption of the longer alkane for chain length differences greater than five carbon atoms is verified but reduced for chain length differences less than or equal to two. With a difference in chain length of one carbon atom, Vegard's law is followed for the melting points of the adsorbed mixture and the (0 2) d-spacing is a continuous function of the mole fraction x. With a two-carbon atom difference, samples aged for 1 week have a lamellar structure for which the entities A_1−xB_x try to be commensurate with the substrate. The same samples aged for 1 month show a continuous parabolic x-dependence for both the melting points and the d-spacings. An explanation in terms of selective probability of adsorption is proposed based on crystallographic considerations.     

Textural and electronic characteristics of mechanochemically activated composites with nanosilica and activated carbon

Nanosilicas (A-50, A-300, A-500)/activated carbon (AC, S_BET = 1520 m²/g) composites were prepared using short-term (5 min) mechanochemical activation (MCA) of powder mixtures in a microbreaker. Smaller silica nanoparticles of A-500 (average diameter d_av = 5.5 nm) can more easily penetrate into broad mesopores and macropores of AC microparticles than larger nanoparticles of A-50 (d_av = 52.4 nm) or A-300 (d_av = 8.1 nm). After MCA of silica/AC, nanopores of non-broken AC nanoparticles remained accessible for adsorbed N₂ molecules. According to ultra-soft X-ray emission spectra (USXES), MCA of silica/AC caused formation of chemical bonds Si-O-C; however, Si-C and Si-Si bonds were practically not formed. A decrease in intensity of OK_α band in respect to CK_α band of silica/AC composites with diminishing sizes of silica nanoparticles is due to both changes in the surface structure of particles and penetration of a greater number of silica nanoparticles into broad pores of AC microparticles and restriction of penetration depth of exciting electron beam into the AC particles.     

Surface morphology of metal films deposited on mica at various temperatures observed by atomic force microscopy

Thin films of eight metals with a thickness of 150 nm were deposited on mica substrates by thermal evaporation at various temperatures in a high vacuum. The surface morphology of the metal films was observed by atomic force microscopy (AFM) and the images were characterized quantitatively by a roughness analysis and a bearing analysis (surface height analysis). The films of Au, Ag, Cu, and Al with the high melting points were prepared at homologous temperatures T/T_m = 0.22-0.32, 0.40, and 0.56. The films of In, Sn, Bi, and Pb with the low melting points were prepared at T/T_m = 0.55-0.70, where T and T_m are the absolute temperatures of the mica substrate and the melting point of the metal, respectively. The surface morphology of these metal films was studied based on a structure zone model. The film surfaces of Au, Ag, and Cu prepared at the low temperatures (T/T_m = 0.22-0.24) consist of small round grains with diameters of 30-60 nm and heights of 2-7 nm. The surface heights of these metal films distribute randomly around the surface height at 0 nm and the morphology is caused by self-shadowing during the deposition. The grain size becomes large due to surface diffusion of adatoms and the film surfaces have individual characteristic morphology and roughnesses as T increases. The surface of the Al film becomes very smooth as T increases and the atomically smooth surface is obtained at T/T_m = 0.56-0.67 (250-350 °C). On the other hand, the atomically smooth surface of the Au film is obtained at T/T_m = 0.56 (473 ± 3 °C). The films of In, Sn, Bi, and Pb prepared at T/T_m = 0.55-0.70 also show the individual characteristic surface morphology.     

Photoluminescence of hexagonal boron nitride: Effect of surface oxidation under UV-laser irradiation

We report on the UV laser-induced fluorescence of hexagonal boron nitride (h-BN) following nanosecond laser irradiation under vacuum and in different environments of nitrogen gas and ambient air. The observed fluorescence bands are tentatively ascribed to impurity and mono (V_N) or multiple (m-V_N with m=2 or 3) nitrogen vacancies. A structured fluorescence band between 300 and 350 nm is assigned to impurity-band transition and its complex lineshape is attributed to phonon replicas. An additional band at 340 nm, assigned to V_N vacancies on surface, is observed under vacuum and quenched by adsorbed molecular oxygen. UV-irradiation of h-BN under vacuum results in a broad asymmetric fluorescence at ∼400 nm assigned to m-V_N vacancies; further irradiation breaks more B-N bonds enriching the surface with elemental boron. However, no boron deposit appears under irradiation of samples in ambient atmosphere. This effect is explained by oxygen healing of radiation-induced surface defects. Formation of the oxide layer prevents B-N dissociation and preserves the bulk sample stoichiometry.     

Surface electronic structure of the (3 × 2) reconstruction induced by Yb on a Si(1 1 1) surface

We have investigated the electronic structure of the Yb/Si(1 1 1)-(3 × 2) surface using angle-resolved photoelectron spectroscopy. Five surface states have been identified in the gap of the bulk band projection. Among these five surface state, the dispersions of three of them agree well with those of the surface states of monovalent atom adsorbed Si(1 1 1)-(3 × 1) surfaces. The dispersions of the two other surface states agree well with those observed on the Ca/Si(1 1 1)-(3 × 2) surface, whose basic structure is the same as that of monovalent atom adsorbed Si(1 1 1)-(3 × 1) surfaces. Taking these results into account, we conclude that the five surface states observed in the band gap originate from the orbitals of Si atoms that form a honeycomb-chain-channel structure.     

Role of pH and calcium ions in the adsorption of an alkyl N-aminodimethylphosphonate on steel: An XPS study

The role of pH and calcium ions in the adsorption of an alkyl N-aminodimethylphosphonate on mild steel (E24) surfaces was investigated by XPS. Fe 2p_3/2 and O 1s spectra show that the oxide/hydroxide layer developed on the steel surface, immersed in the diphosphonate solution (7 ≤ pH ≤ 13, without Ca²⁺) or in a filtered cement solution (pH 13, 15.38 mmol l⁻¹ of Ca²⁺), consists of Fe₂O₃, covered by a very thin layer of FeOOH (goethite). The total thickness of the oxide/hydroxide layer is ∼3 nm and is independent of the pH and the presence/absence of Ca²⁺. In the absence of Ca²⁺ ions, the N 1s and P 2p spectra reveal that the adsorption of the diphosphonate on the outer layer of FeOOH takes place only for pH lower than the zero charge pH of goethite (7.55). At pH 7, the adsorbed diphosphonate layer is continuous and its equivalent thickness is ∼24 Å (monolayer). In the presence of Ca²⁺ ions, the C 1s and Ca 2p signals indicate that calcium is present on the steel surface as calcium phosphonate (and Ca(OH)₂, in very small amount). The adsorption of the diphosphonate molecules on the steel surface is promoted in alkaline solution (pH > 7.55) by the doubly charged Ca²⁺ ions that bridge the O⁻ of goethite and the P-O⁻ groups of the diphosphonate molecules. The measured values for the Ca/P intensity ratio are in the range 0.75-1, which suggests that the diphosphonate molecules are adsorbed on steel forming a polymer cross-linked by calcium ions through their phosphono groups. In the presence of Ca²⁺ ions in alkaline solution, the adsorbed diphosphonate layer is discontinuous and the surface coverage is found to be ∼34%.     

Ultra fast melting process in femtosecond laser crystallization of thin a-Si layer

In this paper, we investigated the mechanism of crystallization induced by femtosecond laser irradiation for an amorphous Si (a-Si) thin layer on a crystalline Si (c-Si) substrate. The fundamental, SHG, THG wavelength of a Ti:Sapphire laser was used for the crystallization process. To investigate the processed areas we performed Laser Scanning Microscopy (LSM), Transmission Electron Microscopy (TEM) and Imaging Pump-Probe measurements. Except for 267 nm femtosecond laser irradiation, the crystallization occurred well. The threshold fluences for the crystallization using 800 nm and 400 nm femtosecond laser irradiations were 100 mJ/cm² and 30 mJ/cm², respectively. TEM observation revealed that the crystallization occurred by epitaxial growth from the boundary surface between the a-Si layer and c-Si substrate. The melting depths estimated by Imaging Pump-Probe measurements became shallower when the shorter wavelength was used.     

Adsorption of octadecyltrichlorosilane on mesoporous SBA-15

Adsorption of octadecyltrichlorosilane (OTS) on mesoporous SBA-15 has been studied by using Brunauer-Emmett-Teller (BET) surface area analysis, scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDAX), Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS) and thermo-gravimetric analysis (TGA) techniques. BET surface area analysis shows decrease of surface area from 930 to 416 m²/g after OTS adsorption. SEM pictures show close attachment of SBA-15 particles. EDAX measurements show increase of carbon weight percentage and decrease of oxygen and silicon weight percentage. XPS results closely support EDAX analysis. FTIR spectra shows presence of methyl (-CH₃) and methylene (-CH₂) bands and oriented OTS monolayer on SBA-15. Thermo-gravimetric analysis shows that the OTS adsorbed on SBA-15 are stable up to a temperature of 230 °C and that the OTS monolayers decompose between 230 and 400 °C.     

Adsorption mode of the chiral modifier cinchonidine on Au(1 1 1)

The adsorption of the chiral modifier cinchonidine on Au(l 1 1) in UHV has been studied by means of TPD, LEED and XPS. In the monolayer the molecule is bound via nitrogen lone pair electrons of its quinoline part rather than via the π-system of this aromatic moiety. Intact molecular desorption is only observed for the multilayers. Decomposition in the first monolayer upon heating occurs above 400 K, indicating a stronger interaction in the monolayer. No long-range ordered structures were observed via LEED. Long-time exposure leads to rearrangement and further stabilization of the first molecular monolayer. Quinoline is bound to gold via the nitrogen lone pair as well. The binding energy of 9.6 kcal/mol is characteristic for physisorption.     

Nitrogen plasma cleaning of Ge(1 0 0) surfaces

We propose a dry method of cleaning Ge(1 0 0) surfaces based on nitrogen plasma treatment. Our in situ Auger electron spectroscopy (AES) and low-energy electron diffraction (LEED) analyses demonstrate that surface contamination remaining after wet treatment was effectively removed by nitrogen radical irradiation at low substrate temperatures. The nitrogen plasma cleaned Ge(1 0 0) surface shows a well-ordered 2 × 1 reconstruction, which indicates the formation of a contamination-free Ge(1 0 0) surface with good crystallinity. We discuss the possible reaction mechanism considering how chemisorbed carbon impurities are removed by selective C-N bond formation and subsequent thermal desorption. These findings imply the advantage of plasma nitridation of Ge surfaces for fabricating nitride gate dielectrics, in which we can expect surface pre-cleaning at the initial stage of the plasma treatment.     

The melting behaviors of the Nb(1 1 0) nanofilm: a molecular dynamics study

By using molecular dynamics (MD) and the modified analytic embedded atom method (MAEAM), we have studied the melting point, the melting mechanism and the correspondingly dynamical behaviors of a Nb(1 1 0) nanofilm. Firstly, in accordance to the MD time dependence of the potential energy, the melting point of this nanofilm has been roughly estimated. Then, the melting mechanism of the nanofilm have been analyzed in detail with the application of the structure factor. The results clearly indicate that the melting transition of the 8th, 9th, and 10th atomic layer of the nanofilm has been characterized by the exponential, polynomial and linear sequence respectively when the thickness of the quasiliquid film attains to about 1.3 nm. Thirdly, the dynamical behaviors of the nanofilm melting, such as the melting front propagation velocity and the kinetic coefficient, which have also been analyzed, demonstrate that the melting front propagation velocity has linearly increased with the incremental temperature and the evaluated kinetic coefficient has approximately equaled 1.43m/(sK). Finally, by extrapolating the melting front propagation velocity to zero, we can accurately deduce the melting point of the Nb(1 1 0) nanofilm to 2568.3 K, which is much lower than the counterpart (2740 K) of the bulk niobium.     

Nonlinear optical properties of Au/ZnO nanoparticle arrays

The triangular-shaped Au/ZnO nanoparticle arrays were fabricated on fused quartz substrate using nanosphere lithography. The structural characterization of the Au/ZnO nanoparticle arrays was investigated by atomic force microscopy. The absorption peak due to the surface plasmon resonance of Au particles at the wavelength of about 570 nm was observed. The nonlinear optical properties of the nanoparticle arrays were measured using the z-scan method at a wavelength of 532 nm with pulse duration of 10 ns. The real and imaginary part of third-order nonlinear optical susceptibility, Re χ⁽³⁾ and Im χ⁽³⁾, were determined to be 1.15 × 10⁻⁶ and −5.36 × 10⁻⁷ esu, respectively. The results show that the Au/ZnO nanoparticle arrays have great potential for future optical devices.     

Monolayer adsorption of water on NaCl(1 0 0)

Density functional theory calculations have been applied to investigate the adsorption geometry of water overlayers on the NaCl(1 0 0) surface in the monolayer regime. Competition between H-H intermolecular repulsion and the attraction of the polar molecules to the surface ions results in the most stable structure having a 2 × 1 adsorption symmetry with an adsorption energy of 415 meV. Overlayers of 1 × 1 symmetry, as observed in experiment, have slightly lower adsorption energies. The layers are also unstable with respect to rotation of individual molecules. Multiple hydrogens/oxygens interacting with a single substrate ion can pull that ion out of the surface, although the examples considered are energetically very unfavourable. Overlayers of 1 × 1 symmetry with a coverage of one water molecule per NaCl do not have a high enough adsorption energy to wet the surface.     

Self-assembled monolayers of radical molecules physisorbed on HOPG(0 0 0 1) substrate studied by scanning tunnelling microscopy and electron paramagnetic resonance techniques

In this paper, we present a combined STM and EPR study on the adsorption and self-organization of monolayers formed from 2-(14-Carboxytetradecyl)-2-ethyl-4,4-dimethyl-3-oxazolidinyloxy (16DS) and 4′,4′-Dimethylspiro(5α-cholestane-3,2′-oxazolidin)-3′-yloxy (CSL) adsorbed on a highly oriented pyrolitic graphite HOPG(0 0 0 1) substrate. Both 16DS and CSL molecules are persistent free radicals containing a paramagnetic doxyl group. The STM measurements of 16DS on HOPG(0 0 0 1) were performed at the liquid-solid interface while the studies of CSL on HOPG(0 0 0 1) were carried out under ultrahigh vacuum conditions. It was found that the 16DS molecules on the HOPG(0 0 0 1) surface form a highly-ordered monolayer with a domain structure. The high-resolution STM images show structural details of 16DS molecules on HOPG(0 0 0 1) revealing the paramagnetic doxyl group. In contrast, CSL molecules on HOPG(0 0 0 1) form a well-ordered monolayer without domain structure. The EPR results indicate that both compounds deposited on HOPG(0 0 0 1) substrate are not reduced and retain their paramagnetic character. We believe that the molecular systems described can be used in single spin detection experiments using an electron spin noise-scanning tunnelling microscopy (ESN-STM) technique. In particular, the possibility of obtaining contrast spin signals from the paramagnetic and diamagnetic parts of molecules increases the significance of our results.     

Stable atomic structure and magnetism of Pt–Cr binary surface alloys on Pt(0 0 1): First-principle calculations

The possibility of Pt–Cr surface alloys formation on Pt(0 0 1) was investigated and their magnetism was calculated by the full-potential linearized augmented plane wave (FLAPW) method with eight different atomic configurations. The most stable structure was calculated to be the Pt-segregated L1₂ ferromagnetic surface alloy. A₃B types (L1₂ or D0₂₂) were more stable compared to AB types (L1₀). It implies that the A₃B type surface alloys may be formed when depositing a monolayer of Cr on Pt(0 0 1). It was found from the total energy calculations that there exists a strong tendency of the Pt segregation. The segregation further stabilizes the surface alloy significantly. The work function of the most stable surface alloy was calculated to be 6.02 eV and the magnetic moment of the surface Cr was much enhanced to 3.3 μ_B. It is a quite interesting finding that the coupling between Cr and Pt atoms on the surface plane is ferromagnetic in the Pt-segregated L1₂ ferromagnetic surface alloy, while the coupling is antiferromagnetic in the bulk.     

Structural investigation of n-hexadecanoic acid multilayers on mica surface: Atomic force microscopy study

The structure of n-hexadecanoic acid (HA) multilayers formed by spreading an ethanol solution containing this molecule onto a freshly cleaved mica surface has been studied by atomic force microscopy (AFM). AFM images of multilayers obtained with different coating time showed that HA molecules first formed some sporadic domains on mica surface. With the proceeding of the coating process, these domains gradually enlarged and coalesced, until formed a continuous film finally. It was observed that HA molecules were always adsorbed on mica surface with tilted even-numbered layers structure. The height of the repeated tilted bilayer film was measured to be approximately 3.8 ± 0.2 nm, which implied a ∼60° tilt molecular conformation of the HA bilayers on mica surface. Phase image confirmed that the HA multilayers terminated with the hydrophilic carboxylic acid groups. The formation mechanism of the HA multilayers was discussed in detail. Thus, resulted hydrophilic surfaces are of special interest for further study in biological or man-made member systems.     

Comparative study of the GaAs(1 0 0) surface cleaned by atomic hydrogen

In attempt to correlate electronic properties and chemical composition of atomic hydrogen cleaned GaAs(1 0 0) surface, high-resolution photoemission yield spectroscopy (PYS) combined with Auger electron spectroscopy (AES) and mass spectrometry has been used. Our room temperature investigation clearly shows that the variations of surface composition and the electronic properties of a space charge layer as a function of atomic hydrogen dose display three successive interaction stages. There exists a contamination etching stage which is observed up to around 250 L of atomic hydrogen dose followed by a transition stage and a degradation stage which is observed beyond 700 L of exposure. In the first stage, a linear shift in the surface Fermi level is observed towards the conduction band by 0.14 eV, in agreement to the observed restoration of the surface stoichiometry and contamination removal. The next stage is characterized by a drop in ionization energy and work function, which quantitatively agrees with the observed Ga-enrichment as well as the tail of the electronic states attributed to the breaking As-dimers. As a result of the strong hydrogenation, the interface Fermi level E_F − E_v has been pinned at the value of 0.75 eV what corresponds to the degradation stage of the GaAs(1 0 0) surface that exhibits metallic density of states associated with Ga_As antisites defects. The results are discussed quantitatively in terms of the surface molecule approach and compared to those obtained by other groups.     

Excess surface work—A modelless way of getting surface energies and specific surface areas directly from sorption isotherms

Sorption isotherms can be easily transformed into excess surface work (ESW) isotherms, computed as the product of the adsorbed amount and the change in chemical potential. Plotted against the amount adsorbed at least one minimum is yield. Thermodynamically ESW is the sum of the surface free energy and the isobaric isothermal work of sorption. Therefore, ESW is not a model, instead it is just another way of presenting an isotherm. From the amount adsorbed in the first minimum one can obtain a specific surface area similar to the BET surface area. The depth of the ESW in the minimum gives a sorption energy, which corresponds approximately to the loss of degrees of freedom of the sorptive. In this contribution the ESW plots of various sorption isotherms on highly ordered alumina with cylindrical pores of 25 nm width and mesoporous SBA 15 will be presented and discussed.