Synthesis of ((t)Bu3SiNH)2ClW triple bond WCl(NHSi(t)Bu3)2 and its degradation via NH bond activation.

Treatment of NaW2Cl7(THF)5 with 4 equiv of (t)Bu3SiNHLi afforded the C2 W(III) dimer [((t)Bu3SiNH)2WCl]2 (1, d(W triple bond W) = 2.337(2) A), which is a rare, primary amide M2X4Y2 species. Its degradation provided evidence of NH bond activation by the ditungsten bond. Addition of 2 equiv of (t)Bu3SiNHLi or TlOSi(t)Bu3 to 1 yielded H2 and hydride ((t)Bu3SiN)2((t)Bu3SiNH)WH (2, d(WH) = 1.67(3) A) or ((t)Bu3SiN)2((t)Bu3SiO)WH (3). Thermolysis (60 degrees C, 16 h) of 1 in py gave ((t)Bu3SiN)2WHCl(py) (4-py, 40-50%), ((t)Bu3SiN)2WCl2(py) (6-py, 10%), and ((t)Bu3SiN)2HW(mu-Cl)(mu-H)2W(NSi(t)Bu3)py2 (5-py2, 5%), whereas thermolysis in DME produced ((t)Bu3SiN)2WCl(OMe) (7, 30%), ((t)Bu3SiN)2WCl2 (6, 20%), and ((t)Bu3SiN)2HW(mu-Cl)(mu-H)2W(NSi(t)Bu3)DME (5-DME, 3%). Compound 7 was independently produced via thermolysis of 4-py and DME (-MeOEt, -py), and THF and ethylene oxide addition to hydride 2 gave ((t)Bu3SiN)2((t)Bu3SiNH)WO(n)Bu (8) and ((t)Bu3SiN)2((t)Bu3SiNH)WOEt (9), respectively. Dichloride 6 was isolated from SnCl4 treatment of 1 with the loss of H2. Sequential NH bond activations by the W2 core lead to "((t)Bu3SiN)2WHCl" (4) and subsequent thermal degradation products. Thermolysis of 1 in the presence of H2C=CH(t)Bu and PhC triple bond CPh trapped 4 and generated ((t)Bu3SiN)2W((neo)Hex)Cl (10) and a approximately 6:1 mixture of ((t)Bu3SiN)2WCl(cis-CPh=CPhH) (11-cis) and ((t)Bu(3)SiN)2WCl(trans-CPh=CPhH) (11-trans), respectively. Thermolysis of the latter mixture afforded ((t)Bu3SiNH)((t)Bu3SiN)WCl(eta2-PhCCPh) (12) as the major constituent. Alkylation of 1 with MeMgBr produced ((t)Bu3SiN)2W(CH3)2 (13), as did addition of 2 equiv of MeMgBr to 6. X-ray crystal structure determinations of 1, 2, 5-py2, 6-py, 11-trans, and 12 confirmed spectroscopic identifications. A general mechanism that features a sequence of NH activations to generate 4, followed by chloride metathesis, olefin insertion, etc., explains the formation of all products.     

Uranium(III)/(IV) nitrile adducts including UI4(N[triple bond]CPh)4, a synthetically useful uranium(IV) complex

The synthesis of complexes used to elucidate an understanding of fundamental An(III) and An(IV) coordination chemistry requires the development of suitable organic-soluble precursors. The reaction of oxide-free uranium metal turnings with 1.3 equivalents of elemental iodine in acetonitrile provided the U(III)/U(IV) complex salt, [U(N[triple bond]CMe)9][UI6][I] (1), in which the U(III) cation is surrounded by nine acetonitrile molecules in a tricapped trigonal prismatic arrangement, a [UI6]2- counterion, and a noncoordinating iodide. The U-N distances for the prismatic and capping nitrogens are 2.55(3) and 2.71(5) A, respectively. The same reaction performed in benzonitrile afforded crystalline UI4(N[triple bond]CPh)4 (3) in 78% isolated yield. In the solid state, 3 shows an eight-coordinate U(IV) atom in a "puckered" square antiprismatic geometry with U-N and U-I distances of 2.56(1) and 3.027(1) A, respectively. This benzonitrile UI4 adduct is a versatile U(IV) synthon that is soluble in methylene chloride, benzonitrile, and tetrahydrofuran, and moderately soluble in toluene and benzene, but decomposes in benzonitrile at 198 degrees C to [UI(N[triple bond]CPh)8][UI]6 (4), a U(III)/U(IV) salt analogous to 1. A toluene slurry of 3 treated with 2.2 equiv of Cp*MgCl.THF (Cp* = pentamethylcyclopentadienide) provided Cp*2UI2(N[triple bond]CPh) (5) in low yields. Single-crystal X-ray structure determination shows that the iodide ligands in 5 are in a rare cis configuration with an acute I-U-I angle of 83.16(7) degrees . Treatment of a methylene chloride solution of 3 with KTp* (Tp* = hydridotris(3,5-dimethylpyrazolylborate)) formed green TpUI3 (6) which was converted to yellow Tp*UI3(N[triple bond]CMe) (7) by rinsing with acetonitrile. Addition of 2.2 equiv of KTp* to a toluene solution of 3 followed by heating at 95 degrees C, filtration, and crystallization led to the isolation of the dinuclear species [Tp*UI(dmpz)]2[mu-O] (9) (dmpz = 3,5-dimethylpyrazolide), presumably formed by hydrolytic cleavage of excess KTp* by adventitious water. The Tp* complexes 6, 7, and 9 were characterized by single-crystal X-ray diffraction, NMR, FT-IR, and optical absorbance spectroscopies.     

P(MeNCH2CH2)3N: an efficient catalyst for the desilylation of tert-butyldimethylsilyl ethers

tert-Butyldimethylsilyl (TBDMS) ethers of primary, secondary, and tertiary alcohols and phenolic TBDMS ethers are desilylated to their corresponding alcohols and phenols, respectively, in DMSO, at 80 degrees C, in 68-94% yield in the presence of 0.2-0.4 equiv of P(MeNCH2CH2)3N. Using P(i-PrNCH2-CH2)3N as the catalyst, 85-97% yields of desilylated alcohols were obtained from TBDMS ethers of 1-octanol, 2-phenoxyethanol, and racemic alpha-phenyl ethanol. These are the first examples of desilylations of silyl ethers catalyzed by nonionic bases. Both catalysts were much less effective for the desilylation of tert-butyldiphenylsilyl (TBDPS) ethers (22-45% yield) under the same conditions as used for TBDMS ethers. Possible pathways involving nucleophilic attack of the anion of the solvent molecule (generated by the catalyst) at the Si-O bond of silyl ether or a prior activation of the silyl ether by the catalyst via a P-Si interaction followed by nucleophilic attack of the solvent anion are proposed on the basis of 1H and 31P NMR experimental data.     

Spectroscopic calculations of CH and OH bond dissociation energies for aldehydes, ketones, acids, and alcohols

CH and OH bond dissociation energies were calculated by the spectroscopic and quantum-chemical methods for aldehydes, ketones, acids, and alcohols. The spectroscopic values of CH and OH bond dissociation energies were obtained from the fundamental absorption bands by the variational method in an anharmonic approximation using the Morse-anharmonic basis set. Quantum-chemical calculations were carried out using the 6-311G(3df,3pd)/B3LYP basis set. It is discussed how the bond dissociation energies change with the structure of the molecule.     

Semiempirical computation of homolytic O-H bond dissociation energies of alcohols: comparison of the AM1 and PM3 methods

The heats of formation of various alcohols and alkoxy radicals were calculated using the AM1 and PM3 semiempirical methods, which were then used to calculate the bond dissociation energies of the alcohols. Both restricted Hartree-Fock (RHF) and unrestricted Hartree-Fock (UHF) calculations were performed to determine which technique was most applicable to the computation of bond dissociation energies within the semiempirical frameworks. It was determined that AM1/RHF calculations gave the most accurate results for O-H bond dissociation energies of alcohols. The effect of using configuration interaction calculations to calculate bond dissociation energies within the semiempirical framework was also examined.     

Palladium-catalyzed silyl C(sp3)-H bond activation

The first transition-metal-catalyzed activation of silyl C(sp(3))-H bond was realized and synthetically applied. A variety of organic skeletons substituted with SiMe(3) groups could undergo the Pd-catalyzed intramolecular coupling reaction, resulting in an unprecedented synthetic method for yielding six-membered silacycles. It was found that the adjacent Si atom played an essential role for the activation of the C(sp(3))-H bond of the SiMe(3) group; no activation reaction of the C(sp(3))-H bond of the CMe(3) group took place under the same reaction conditions.     

Direct acetoxylation and etherification of anilides using phenyliodine bis(trifluoroacetate)

Treatment of various anilides with 1.5 equiv. of phenyliodine bis(trifluoroacetate) (PIFA) and 1.0 equiv. of BF(3)·OEt(2) in AcOH at room temperature afforded the corresponding para-acetoxylated products with high regioselectivity. In addition, this reaction could be expanded to the etherification of anilides. In the presence of 2.0 equiv. of PIFA and 2.0 equiv. of BF(3)·OEt(2), the reaction of anilides with alcohols provided the corresponding para-etherified products in good yields.     

Carbon-carbon bond activation of R-CN (R = Me, Ar, iPr, tBu) using a cationic Rh(III) complex

Addition of 1.0 equiv of Ph3SiH to [Cp*(PMe3)Rh(Me)(CH2Cl2)]+BAr'4- (1) resulted in release of methane and quantitative formation of [Cp*(PMe3)Rh(SiPh3)(CH2Cl2)]+BAr'4- (2). Subsequent addition of 1.0 equiv of MeCN to 2 caused immediate displacement of dichloromethane to form the eta1-nitrile adduct [Cp*(PMe3)Rh(SiPh3)(NCMe)]+BAr'4- (3). Upon standing at room-temperature overnight, complex 3 converted quantitatively to another product which has been characterized as the C-C activation product, [Cp*(PMe3)Rh(Me)(CNSiPh3)]+BAr'4- (5). Addition of other nitrile substrates (R-CN, R = Ph, (4-CF3)Ph, (4-MeO)Ph, iPr, tBu) to 2 also resulted in C-C activation of the R-CN bond to form [Cp*(PMe3)Rh(R)(CNSiPh3)]+BAr'4-. Evidence for an eta2-iminoacyl intermediate complex, [Cp*(PMe3)Rh(eta2-C(R)=N(SiPh3)]+BAr'4-, is also presented.     

Carbon-carbon bond formation in palladium(II)-catalyzed allylic oxidation: a novel oxidative carbocyclization of allene-substituted olefins

A new efficient palladium(II)-catalyzed oxidative carbocyclization has been developed. It was found that allene-substituted olefins 1 cyclized in the presence of 1 mol % Pd(O2CCF3)2 and p-benzoquinone (2 equiv) to give bicyclic ring systems 2 in good to excellent yields. The cyclization constitutes a new type of carbon-carbon bond forming reaction between an allene and an olefin under oxidative conditions.     

The short N [bond] F bond in N(2)F(+) and how Pauli repulsion influences bond lengths. Theoretical study of N(2)X(+), NF(3)X(+), and NH(3)X(+) (X [double bond] F, H)

Exceptionally short N [bond] F bond distances of only 1.217 A (crystal) and 1.246 A (gas phase) have been reported for N(2)F(+), making it the shortest N [bond] F bond ever observed. To trace the origin of this structural phenomenon, we have analyzed the model systems N(2)X(+), NF(3)X(+), and NH(3)X(+) (X [double bond] F, H) using generalized gradient approximation density functional theory at BP86/TZ2P. In good agreement with experiment, the computations yield an extremely short N [bond] F bond for N(2)F(+): we find N [bond] F bond distances in N(2)F(+), NF(4)(+), and NH(3)F(+) of 1.245, 1.339, and 1.375 A, respectively. The N [bond] X bonding mechanisms are quantitatively analyzed in the framework of Kohn-Sham MO theory. At variance with the current hypothesis, reduced steric and other Pauli repulsion (of substituents or lone pairs at N with F) rather than the extent of s [bond] p hybridization of N (i.e., sp versus sp(3)) are responsible for the much shorter N [bond] F distance in N(2)F(+) compared to NF(4)(+). The results for our nitrogen compounds are furthermore discussed in the more general context of how bond lengths are determined by both bonding and repulsive orbital interactions.     

Mononuclear nickel(III) complexes [Ni(III)(OR)(P(C6H3-3-SiMe3-2-S)3)](-) (R = Me, Ph) containing the terminal alkoxide ligand: relevance to the nickel site of oxidized-form [NiFe] hydrogenases

The unprecedented nickel(III) thiolate [Ni (III)(OR)(P(C 6H 3-3-SiMe 3-2-S) 3)] (-) [R = Ph ( 1), Me ( 3)] containing the terminal Ni (III)-OR bond, characterized by UV-vis, electron paramagnetic resonance, cyclic voltammetry, and single-crystal X-ray diffraction, were isolated from the reaction of [Ni (III)(Cl)(P(C 6H 3-3-SiMe 3-2-S) 3)] (-) with 3 equiv of [Na][OPh] in tetrahydrofuran (THF)-CH 3CN and the reaction of complex 1 with 1 equiv of [Bu 4N][OMe] in THF-CH 3OH, respectively. Interestingly, the addition of complex 1 into the THF-CH 3OH solution of [Me 4N][OH] also yielded complex 3. In contrast to the inertness of complex [Ni (III)(Cl)(P(C 6H 3-3-SiMe 3-2-S) 3)] (-) toward 1 equiv of [Na][OPh], the addition of 1 equiv of [Na][OMe] into a THF-CH 3CN solution of [Ni (III)(Cl)(P(C 6H 3-3-SiMe 3-2-S) 3)] (-) yielded the known [Ni (III)(CH 2CN)(P(C 6H 3-3-SiMe 3-2-S) 3)] (-) ( 4). At 77 K, complexes 1 and 3 exhibit a rhombic signal with g values of 2.31, 2.09, and 2.00 and of 2.28, 2.04, and 2.00, respectively, the characteristic g values of the known trigonal-bipyramidal Ni (III) [Ni (III)(L)(P(C 6H 3-3-SiMe 3-2-S) 3)] (-) (L = SePh, SEt, Cl) complexes. Compared to complexes [Ni (III)(EPh)(P(C 6H 3-3-SiMe 3-2-S) 3)] (-) [E = S ( 2), Se] dominated by one intense absorption band at 592 and 590 nm, respectively, the electronic spectrum of complex 1 coordinated by the less electron-donating phenoxide ligand displays a red shift to 603 nm. In a comparison of the Ni (III)-OMe bond length of 1.885(2) A found in complex 3, the longer Ni (III)-OPh bond distance of 1.910(3) A found in complex 1 may be attributed to the absence of sigma and pi donation from the [OPh]-coordinated ligand to the Ni (III) center.     

Reduction of nitriles with 2-propanol in presence of RhCl(PPh3)3 and RuCl2(PPh3)3

Conclusions The complexes RhCl(PPh₃)₃ and RuCl₂(PPh₃)₃ catalyze hydrogen transfer from 2-propanol to the C N bond of benzonitrile and capronitrile. The reduction rate of the aromatic nitrile is higher than that of the aliphatic nitrile.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 8, pp. 1894–1895, August, 1976.     

Striking stability of a substituted silicon(II) bis(trimethylsilyl)amide and the facile Si-Me bond cleavage without a transition metal catalyst

Silicon(II) bis(trimethylsilyl)amide (LSiN(SiMe(3))(2), L= PhC(NtBu)(2)) (2) has been synthesized by the reaction of LSiHCl(2) with KN(SiMe(3))(2) in 1:2 molar ratio in high yield where 1 equiv of the latter functions as a dehydrochlorinating agent. 2 exhibits a high stability up to 154 °C and can be handled in open air for a short period of time without any appreciable decomposition. An amazing five-membered cyclic silene (3) results from the cleavage of one Si-Me bond of 2 with an adamantyl phosphaalkyne. 3 is the first example of a heavy cyclopentene derivative which consists of four different elements, C, N, Si, and P. Both compounds are characterized by multinuclear NMR spectroscopy, EI-mass spectrometry, and single crystal X-ray diffraction studies.     

Synthesis and reactivity of tris(imido)rhenium complexes containing rhenium-main group element bonds. silicon-carbon bond activations of PhSiH(3) by silyl complexes

The synthesis and reactivity of a series of complexes of the (DippN=)(3)Re (Dipp = 2,6-(i)Pr(2)C(6)H(3)) fragment are reported. The anionic, Re(V) complex (THF)(2)Li(micro,micro-NDipp)(2)Re(=NDipp) (1), prepared by the reaction of (DippN=)(3)ReCl with (THF)(3)LiSi(SiMe(3))(3) or (t)BuLi (2 equiv) in the presence of THF (4 equiv), served as an important starting material for the synthesis of rhenium-element-bonded complexes. For example, treatment of 1 with ClSiR(3) gave the corresponding silyl complexes (DippN=)(3)ReSiR(3) (SiR(3) = SiMe(3) (2a), SiHPh(2) (2b), SiH(2)Ph (2c)). Complexes 2a-c are thought to exist in equilibrium between the Re(VII) (DippN=)(3)ReSiR(3) and Re(V) (DippN=)(2)ReN(SiR(3))Dipp isomers. Complexes 2a,b reacted with PhSiH(3) to give reaction mixtures that included 2c, Ph(2)SiH(2), SiH(4), and C(6)H(6). The silane and organic products arise from Si-C bond formation and cleavage. Treatment of 2a with CO gave (DippN=)(2)Re[N(SiMe(3))Dipp](CO) (3), which appears to result from trapping of the reactive Re(V) isomer of 2a by CO. Complex 1 reacted with the main group halides MeI, Ph(3)GeCl, Me(3)SnCl, Ph(2)PCl, and PhSeCl to give the corresponding rhenium complexes (DippN=)(3)ReER(n) (ER(n)() = Me (4), GePh(3) (5), SnMe(3) (6), PPh(2) (7), SePh (8)) in high yields. X-ray diffraction data for 5 indicate that the germyl ligand is bonded to rhenium, but positional disorder of the phenyl and Dipp groups prevented refinement of accurate metric parameters.     

Molecular structures of tris(dipivaloylmethanato) complexes of the lanthanide metals, Ln(dpm)3, studied by gas electron diffraction and density functional theory calculations: a comparison of the Ln-O Bond distances and enthalpies in Ln(dpm)3 complexes and the cubic sesquioxides, Ln2O3

The molecular structures of tris(dipivaloylmethanato)neodymium(III), Nd(dpm)3, and tris(dipivaloylmethanato)ytterbium(III), Yb(dpm)3, have been determined by gas electron diffraction (GED) and structure optimizations through density functional theory (DFT) calculations. Both molecules were found to have D3 molecular symmetry. The most important structure parameters (r(a) structure) are as follows (GED/DFT): Nd-O = 2.322(5)/2.383 A, Yb-O = 2.208(5)/2.243 A, O-Nb-O = 72.1(3)/71.3 degrees , and O-Yb-O = 75.3(2)/75.8 degrees . The twist angles of the LnO6 coordination polyhedron, defined as zero for prismatic and 30 degrees for antiprismatic coordination, were theta = 19.1(3)/14.2 degrees for Nd and 20.4(2)/19.2 degrees for Yb. Structure optimizations of La(dpm)3, Gd(dpm)3 Er(dpm)3, and Lu(dpm)3 by DFT also yielded equilibrium structures of D3 symmetry with bond distances of La-O = 2.438 A, Gd-O = 2.322 A, Er-O = 2.267 A, and Lu-O = 2.232 A. The Ln-O bond distances in 12 Ln(dpm)3 complexes studied by GED decrease in a nearly linear manner with the increasing atomic number (Z) of the metal atom, as do the Ln-O bond distances in the cubic modifications of 14 sesquioxides, Ln2O3. The bond distances in the dpm complexes are, however, about 2% shorter. The mean Ln-O bond rupture enthalpies of the cubic sesquioxides calculated from thermodynamic data in the literature vary in an irregular manner with the atomic number; the La-O, Gd-O, Tb-O, and Lu-O bonds are nearly equally strong, and the remaining bonds are significantly weaker. The Ln-O bond rupture enthalpies previously reported for 11 Ln(dpm)3 complexes are on the average 13 kJ mol(-1) or about 5% smaller than in the sesquioxides, but they vary in a similar manner along the series: it is suggested that the pattern reflects variations in the absolute enthalpies of the gaseous Ln atoms.     

A weak,short metal-metal bond in a chromium(II) amidinate complex

Treatment of chromium(II) chloride with 2 equiv of Li[tBuNC(CH3)NtBu], Li[iPrNC(CH3)NiPr], or Li[tBuNC(CH3)NEt] (prepared from the corresponding carbodiimides and methyllithium) afforded Cr[tBuNC(CH3)NtBu]2 (1, 50%), Cr[iPrNC(CH3)NiPr]2 (2, 54%), and [Cr(tBuNC(CH3)NEt)2]2 (3, 58%) as deep blue, purple, and amber or metallic green crystals, respectively. Cr[tBuNC(CH3)NtBu]2 and Cr[iPrNC(CH3)NiPr]2 possess monomeric structures in the solid state with tetrahedral and square planar geometries about the chromium centers, respectively. [Cr(tBuNC(CH3)NEt)2]2 exists as a dimer in the solid state, with two mu2-amidinate ligands, two eta2-amidinate ligands, and a chromium-chromium bond length of 1.9601(12) A. [Cr(tBuNC(CH3)NEt)2]2 is diamagnetic in the solid state, as determined by magnetic susceptibility measurement and CP/MAS 13C NMR spectroscopy. However, [Cr(tBuNC(CH3)NEt)2]2 dissociates into paramagnetic monomers in solution, as determined by observation of extremely broad peaks in the 1H NMR spectra in cyclohexane-d12 and benzene-d6, a solution magnetic moment measurement, and by solution molecular weight measurements in benzene. The combined results suggest that the chromium-chromium bond strength in [Cr(tBuNC(CH3)NEt)2]2 is weak and cannot exceed the difference in solvation energies between the dimer and two monomers, plus any increase in metal-nitrogen bond strengths in the monomers.     

Iodination of alpha-Phosphino Enolate Complexes of Palladium(II) and Platinum(II). Synthesis and Crystal Structures of [(dmba)Pd{Ph(2)PC(I)C(O)Ph}] and of the Dipalladium(II) Complex [(dmba)Pd{Ph(2)PCC(O)Ph}Pd(I)(tmeda)] Obtained by Palladium(0) Insertion into the Carbon-Iodine Bond

Electrophilic attack of 1 equiv of I(2) on a PC(sp)2 carbon of the Pt(II) complex (1) afforded (2) in 90% yield. Complex 2 was subsequently deprotonated by NaOEt in ethanol to give the bis(enolato) complex (3). This alpha-phosphino, alpha-iodo enolato complex was obtained directly and quantitatively by the reaction of 1 with 1 equiv of N-iodosuccinimide (NIS). When 2 equiv of NIS was used, the symmetrical complex (4) was formed selectively. In contrast to I(2), NIS was also able to functionalize the phosphino enolate ligand of complexes to give the corresponding iodo derivatives (C N = dmba (5) or 8-mq (6)). These represent the first examples in which a phosphino enolate C-H bond has been directly functionalized, i.e. replaced by a C-X bond. Attempts to use this procedure with or with were unsuccessful. Reaction of 5 with Pd(dba)(2) in the presence of tetramethylenediamine (tmeda) or 2,2'-bipyridine (bipy) afforded (7) and (8), respectively. The solid state structures of complexes 5 and 7.CH(2)Cl(2) have been determined by single-crystal X-ray diffraction: 5 crystallizes in the monoclinic space group P2(1)/n with Z = 4 in a unit cell of dimensions a = 12.867(3) ?, b = 10.625(3) ?, c = 19.509(6) ?, and beta = 102.23(2) degrees; 7.CH(2)Cl(2) crystallizes in the monoclinic space group C2/c with Z = 8 in a unit cell of dimensions a = 35.906(3) ?, b = 13.565(3) ?, c = 15.775(2) ?, and beta = 95.099(10) degrees. Complex 7 contains two palladium(II) centers, in a square-planar environment, connected by the P-C unit of a phosphino enolate ligand which adopts an unprecedented &mgr;-eta(2)(P,C):eta(2)(P,O) bonding mode. The two coordination planes are almost orthogonal and make a dihedral angle of 88.0(2) degrees, which minimizes the steric hindrance between the ligands.     

Synthesis, characterization, and structures of Mn(DMHP)3 x 12H2O and Mn(DMHP)2Cl x 0.5H2O

This report describes the synthesis, characterization, and X-ray crystal structures of two Mn(III) complexes, Mn(DMHP)3 x 12H2O and Mn(DMHP)2Cl x 0.5H2O (DMHP = 1,2-dimethyl-3-hydroxy-4-pyridinone). Mn(DMHP)2Cl was prepared from the reaction of Mn(II) chloride with 2 equiv of DMHP under reflux in the presence of triethylamine. Mn(DMHP)3 was obtained by reacting Mn(II) acetate with 3 equiv of DMHP in the presence of sodium acetate. Mn(DMHP)3 could also be prepared by reacting Mn(OAc)3 x 2H2O with 3 equiv of DMHP in the presence of triethylamine. Both Mn(III) complexes have been characterized by elemental analysis, infrared spectroscopy, electronic paramagnetic resonance, electrospray ionization spectroscopy, electrochemical method, and X-ray crystallography. The X-ray crystal structure of Mn(DMHP)2Cl x 0.5H2O revealed a rare example of five-coordinated Mn(III) complexes with two bidentate ligands and a square pyramidal coordination geometry. Surprisingly, the average Mn-O (hydroxy) bond distance in Mn(DMHP)2Cl x 0.5H2O is approximately 0.025 A longer than that of the average Mn-O (carbonyl) bond, suggesting an extensive delocalization of electrons in the two pyridinone rings. The structure of Mn(DMHP)3 x 12H2O, a rare example of six-coordinate high-spin Mn(III) complexes without Jahn-Teller distortion, is isostructural to M(DMHP)3 x 12H2O (M = Al, Ga, Fe, and In). The electrochemical data for Mn(DMHP)3 suggests that the Mn(III) oxidation state is highly stabilized by three DMHP ligands. DMHP has the potential as a chelator for the removal of excess intracellular Mn and the treatment of chronic Mn toxicity.     

Ga(OTf)3-catalyzed direct substitution of alcohols with sulfur nucleophiles

It is reported that Ga(OTf)(3) catalyzes the direct displacement of alcohols with sulfur nucleophiles. The products are versatile intermediates that can be utilized in carbon-carbon, carbon-sulfur bond formation or used in modified Julia olefination reactions. The only byproduct generated is water.     

Synthesis, photophysics, electrochemistry, theoretical, and transient absorption studies of luminescent copper(I) and silver(I) diynyl complexes. X-ray crystal structures of [Cu3(micro-dppm)3(micro3-eta1-C triple bond CC triple bond CPh)2]PF6 and [Cu3(micro-dppm)3(micro3-eta1-C triple bond CC triple bond CH)2]PF6

A series of soluble trinuclear copper(I) and silver(I) complexes containing bicapped diynyl ligands, [M(3)(micro-dppm)(3)(micro(3)-eta(1)-C triple bond CC triple bond CR)(2)]PF(6) (M = Cu, R = Ph, C(6)H(4)-CH(3)-p, C(6)H(4)-OCH(3)-p, (n)C(6)H(13), H; M = Ag, R = Ph, C(6)H(4)-OCH(3)-p), has been synthesized and their electronic, photophysical, and electrochemical properties studied. The X-ray crystal structures of [Cu(3)(micro-dppm)(3)(micro(3)-eta(1)-C triple bond CC triple bond CPh)(2)]PF(6) and [Cu(3)(micro-dppm)(3)(micro(3)-eta(1)-C triple bond CC triple bond CH)(2)]PF(6) have been determined.