Four-way calibration applied to the simultaneous determination of folic acid and methotrexate in urine samples

First-, second- and third-order calibration methods were investigated for the simultaneous determination of folic acid and methotrexate. The interest in the determination of these compounds is related to the fact that methotrexate inhibits the body’s absorption of folic acid and prolonged treatment with methotrexate may lead to folic acid deficiency, and to the use of folic acid to cope with toxic side effects of methotrexate. Both analytes were converted into highly fluorescent compounds by oxidation with potassium permanganate, and the kinetics of the reaction was continuously monitored by recording the kinetics curves of fluorescence emission, the evolution with time of the emission spectra and the excitation–emission matrices (EEMs) of the samples at different reaction times. Direct determination of mixtures of both drugs in urine was accomplished on the basis of the evolution of the kinetics of EEMs by fluorescence measurements and four-way parallel-factor analysis (PARAFAC) or multiway partial least squares (N-PLS) chemometric calibration. The core consistency diagnostic (CORCONDIA) was employed to determine the correct number of factors in PARAFAC and the procedure converged to a choice of three factors, attributed to folic acid, methotrexate and to the sum of fluorescent species present in the urine.      

Determining sulfamonomethoxine and its acetyl/hydroxyl metabolites in chicken plasma under organic solvent-free conditions

A quantitative technique is described for a sample preparation followed by high performance liquid chromatography method for the simultaneous determination of sulfamonomethoxine and its metabolites, N ⁴-acetyl SMM and 2,6-dihydroxy SMM, in chicken plasma. The average recoveries, analytical total time, and limits of quantitation were ≥80% (relative standard deviations (SD) ≤6%), <30 min sample-1 (12 samples in 2 h), and ≤0.09 μg ml⁻¹, respectively. The procedure, performed under 100% aqueous conditions, uses no organic solvents and toxic reagents at all and is, therefore, harmless to the environment and humans.      

Determination of trace elements in suspensions and filtrates of drinking and surface water by wavelength-dispersive X-ray fluorescence spectrometry

An X-ray fluorescence method (XRF) is presented that allowed low detection limits (at the 0.1–23 ng mL⁻¹ level) to be obtained for Cr, Mn, Fe, Ni, Zn, Sr, Pb, Bi and Br in water. The samples were prepared using a thin layer method. Trace elements were determined via the calibration curve and standard addition. Absorption effects and inhomogenities in prepared samples were checked for using the emission–transmission method and internal standards, respectively. The results from the XRF method were compared with the results from the inductively coupled plasma atomic emission spectrometry method.      

Determination of the titanium content of human transferrin by inductively-coupled plasma-atomic-emission spectroscopy

We report a simple method that combines dialysis, as a purification method, with the multielement capability of ICP to determine the titanium-to-transferrin mole ratio at physiological pH, under buffer conditions. The method, by means of which titanium and transferrin are determined simultaneously, enabled us to assess the binding capacities of different titanocene complexes. Figure Titanocene dichloride     

Arsine and selenium hydride trapping in a novel quartz device for atomic-absorption spectrometry

A novel quartz device has been designed to trap arsine and selenium hydride and subsequently to volatilize the collected analyte and atomize it for atomic-absorption spectrometric detection. The device is actually the multiple microflame quartz-tube atomizer (multiatomizer) with inlet arm modified to serve as the trap and to accommodate the oxygen-delivery capillary used to combust hydrogen during the trapping step. The effect of relevant experimental conditions (trap temperature during trapping and hydrogen flow rate and trap temperature during volatilization) on collection and volatilization efficiency was investigated. Under the optimum conditions collection and volatilization efficiency for arsenic and selenium were 50 and 70%, respectively.      

Speciation of alkylated metals and metalloids in the environment

The analytical methodology for speciation of metals and metalloids associated with alkyl groups and biomacromolecules is critically reviewed. Alkylated metals and metalloids are not only known to be produced by microbial methylation within most anaerobic compartments in the environment, but also in the course of enzymatic transformations during human metabolism. Because of the toxicological relevance of these compounds present in trace to ultratrace concentrations, firm species identification and exact quantification are essential. While many instrumental techniques coupling chromatography (GC, HPLC, CE, GE) with plasma mass spectrometry (ICP-MS) are available for quantification, methods used for structural identification often suffer from inadequate sensitivity (EI-MS, ESI-MS, MALDI-MS, FT-ICRMS). Other problems encountered are sample derivatisation artefacts, lack of suitable standards for quantification, lack of equilibrium between spikes and sample, and the integrity of metal–protein association during separation, in particular during SDS-PAGE. Selected application examples with respect to mercury and arsenic speciation will be discussed critically.      

SPME in environmental analysis

Recent advances in the use of solid-phase microextraction (SPME) in environmental analysis, including fiber coatings, derivatization techniques, and in-tube SPME, are reviewed in this article. Several calibration methods for SPME, including traditional calibration methods, the equilibrium extraction method, the exhaustive extraction method, and several diffusion-based calibration methods, are presented. Recent developed SPME devices for on-site sampling and several applications of SPME in environmental analysis are also introduced.      

Classification of bacteria by simultaneous methylation–solid phase microextraction and gas chromatography/mass spectrometry analysis of fatty acid methyl esters

Direct methylation and solid-phase microextraction (SPME) were used as a sample preparation technique for classification of bacteria based on fatty acid methyl ester (FAME) profiles. Methanolic tetramethylammonium hydroxide was applied as a dual-function reagent to saponify and derivatize whole-cell bacterial fatty acids into FAMEs in one step, and SPME was used to extract the bacterial FAMEs from the headspace. Compared with traditional alkaline saponification and sample preparation using liquid–liquid extraction, the method presented in this work avoids using comparatively large amounts of inorganic and organic solvents and greatly decreases the sample preparation time as well. Characteristic gas chromatography/mass spectrometry (GC/MS) of FAME profiles was achieved for six bacterial species. The difference between Gram-positive and Gram-negative bacteria was clearly visualized with the application of principal component analysis of the GC/MS data of bacterial FAMEs. A cross-validation study using ten bootstrap Latin partitions and the fuzzy rule building expert system demonstrated 87 ± 3% correct classification efficiency.      

Application of anodized aluminum in fluorescence detection of biological species

Thin nanoporous alumina obtained by anodization of aluminum films offers promising advantages for application in fluorescence-based biological sensors including convenient preparation, increased density of binding sites, and improved collection efficiency of fluorescence. These advantages are illustrated in the detection of streptavidin using biotin covalently bound to the surface of alumina nanopores. Fluorescence intensity enhancement as high as 7 times is observed in nanopores in comparison to flat glass surface.      

Recent advances in capillary electrophoretic analysis of individual cells

Because variability exists within populations of cells, single-cell analysis has become increasingly important for probing complex cellular environments. Capillary electrophoresis (CE) is an excellent technique for identifying and quantifying the contents of single cells owing to its small volume requirements and fast, efficient separations with highly sensitive detection. Recent progress in both whole-cell and subcellular sampling has allowed researchers to study cellular function in the areas of neuroscience, oncology, enzymology, immunology, and gene expression.      

Headspace mass spectrometry methodology: application to oil spill identification in soils

In the present work we report the results obtained with a methodology based on direct coupling of a headspace generator to a mass spectrometer for the identification of different types of petroleum crudes in polluted soils. With no prior treatment, the samples are subjected to the headspace generation process and the volatiles generated are introduced directly into the mass spectrometer, thereby obtaining a fingerprint of volatiles in the sample analysed. The mass spectrum corresponding to the mass/charge ratios (m/z) contains the information related to the composition of the headspace and is used as the analytical signal for the characterization of the samples. The signals obtained for the different samples were treated by chemometric techniques to obtain the desired information. The main advantage of the proposed methodology is that no prior chromatographic separation and no sample manipulation are required. The method is rapid, simple and, in view of the results, highly promising for the implementation of a new approach for oil spill identification in soils. Figure PCA score plots illustrate clear discrimination of types of crude oil in polluted soil samples (e.g. results are shown for vertisol)     

Determination of Etofenprox in environmental samples by HPLC after anionic surfactant micelle-mediated extraction (coacervation extraction)

A method is described for determination of residues of the insecticide Etofenprox in environmental samples. Anionic surfactant micelle-mediated extraction (coacervation extraction) was evaluated for isolation of Etofenprox before HPLC. The optimum conditions used for extraction included: 0.09 g sodium dodecanesulfonate (SDoS), 3.1 mL (3.3, for concentrations below 0.04 mg L⁻¹) 12 mol L⁻¹ HCl, 5 min vortex stirring, 5 min centrifugation at 4000 rpm, 2 h equilibration time. The limits of quantification (LOQ) and detection (LOD) were 0.01 and 0.004 mg L⁻¹, respectively, and recoveries obtained from five real samples ranged from 94.33±2.48 to 100.13±2.71%. The precision of the method was good; relative standard deviations (RSD) were less than 7%.      

Laser ablation inductively coupled plasma mass spectrometry for direct analysis of the spatial distribution of trace elements in metallurgical-grade silicon

The spatial distribution and concentration of impurities in metallurgical-grade silicon (MG-Si) samples (97–99% w/w Si) were investigated by use of laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). The spatial resolution (120 μm) and low limits of detection (mg kg⁻¹) for quality assurance of such materials were studied in detail. The volume-dependent precision and accuracy of non-matrix-matched calibration for quantification of minor elements, using NIST SRM 610 (silicate standard), indicates that LA-ICP-MS is well suited to rapid process control of such materials. Quantitative results from LA-ICP-MS were compared with previously reported literature data obtained by use of ICP-OES and rf-GD-OES. In particular, the distribution of element impurities and their relationship to their different segregation coefficients in silicon is demonstrated. Dedicated to Professor Klaus G. Heumann     

Impedimetric genosensors for the detection of DNA hybridization

Impedance spectroscopy is proposed as the transduction principle for detecting the hybridization of DNA complementary strands. In our experiments, different DNA oligonucleotides were used as model gene substances. The gene probe is first immobilized on a graphite-epoxy composite working electrode based genosensor. Detection principle is based on changes of impedance spectra of a redox marker, the ferro/ferricyanide couple, after hybridization with target DNA. Resistance offered to the electrochemical reaction serves as the working signal, allowing for an unlabelled gene assay.      

31P NMR study on the autophosphorylation of insulin receptors in the plasma membrane

A nonradioactive ³¹P nuclear magnetic resonance (NMR) spectroscopy protocol has been developed and used to investigate in vitro autophosphorylation of insulin receptors. Optimum experimental conditions have been explored, and the effects of Mn²⁺ and phosphocreatine (PCr) on the determination of the phosphorylation reaction have been assayed. The method was used to monitor the time courses of the phosphorylation reaction in solution. The results from this NMR study were in agreement with observations of insulin receptor phosphorylation made by using Western blotting.      

Dual nebulizer sample introduction system for simultaneous determination of volatile elemental hydrides and other elements

A dual sample introduction system was explored for volatile hydride generation in inductively coupled plasma–optical emission spectrometry (ICP–OES) performed in the radially viewed mode. The system consists of two pneumatic nebulizers connected to the conventional spray chamber of the instrument via a simple adaptor. This configuration permits hydride generation but still allows other elements to be determined by pneumatic nebulization. This work was focused on the optimization of the plasma operating conditions for the determination of As, Hg, Sb and Se and other elements. The excitation conditions of the ICP–OES instrument operated with the dual sample introduction system were also explored. Results showed that the analytical performance of the dual system for the determination of As, Hg, Sb and Se was superior to those of conventional nebulization systems. The dual system also enabled the determination of elements that do not form volatile hydrides, but with less sensitivity than conventional nebulization systems. An evaluation of the plasma robustness showed that the gases generated in the hydride reactions did not significantly affect the plasma discharge. Similar to conventional hydride generation techniques, the analysis was susceptible to nonspectroscopic interferences produced by transition metals. Finally, the applicability of the dual nebulization system to practical ICP–OES studies was demonstrated by determining the trace elements in an oyster tissue standard reference material.      

Development of a competitive ELISA for the quantification of F5 conjugate in HER2-targeted STEALTH immunoliposome doxorubicin in plasma samples

HER2 (human epidermal growth factor receptor 2, erbB2, or neu) is overexpressed by a large number of tumor types and has been identified as an important target for cancer therapy. F5 is a single-chain human antibody fragment that recognizes HER2 receptor and is covalently conjugated to PEGylated lipid to form F5 conjugate (F5CG) in the product HER2 targeted STEALTH immunoliposome doxorubicin. Here we described the method development of a competitive enzyme-linked immunosorbent assay (ELISA) for the determination of total concentration of F5 conjugate in plasma samples. The method involved the biotinylation of F5CG, detergent treatment of plasma sample to solubilize F5CG into monomeric form, and competitive ELISA for solubilized F5CG competitively binding to anti-F5CG antibody with biotinylated F5CG for the determination of total F5CG in plasma. The detection range of this method was from 0.2 ng/mL to 125 ng/mL for F5CG in plasma. The lower limit of quantification (LLOQ) was 0.2 ng/mL. This method was established and used for the measurement of F5CG concentration to provide information about F5CG circulation after the administration of immunoliposome in preclinical studies.      

Colorimetric detection of immunoglobulin G by use of functionalized gold nanoparticles on polyethylenimine film

A method based on use of functionalized gold nanoparticles on polyethylenimine film has been developed for colorimetric detection of immunoglobulin G (IgG). The immunogold nanoparticles were immobilized on quartz slides by recognition between antibody and antigen, with the antigen chemically adsorbed on the polyethylenimine film. By measurement of the UV–visible spectra of the immobilized immunogold, detection of h-IgG was achieved. The detection limit for h-IgG by use of this method can be as low as 0.01 μg mL⁻¹. This method is quite promising for numerous applications in immunoassay. Figure