Research on stability of interface of jet containing suspended solid particles

Ｎｏｍｅｎｃｌａｔｕｒｅ　αｓ:ｐａｒｔｉｃｌｅｖｏｌｕｍｅｆｒａｃｔｉｏｎ;　ｕｇ:ｇａｓｉｎｓｔａｎｔａｎｅｏｕｓｖｅｌｏｃｉｔｙｖｅｃｔｏｒ;　ｕｓ:ｐａｒｔｉｃｌｅｉｎｓｔａｎｔａｎｅｏｕｓｖｅｌｏｃｉｔｙｖｅｃｔｏｒ;　Ｕ :ｍｅａｎａｘｉａｌｖｅｌｏｃｉｔｙｏｆｔｗｏ＿ｐｈａｓｅｊｅｔ;　Ｕ0 :ｘ＿ａｘｉａｌｖｅｌｏｃｉｔｙｏｆｔｈｅｅｘｉｔ,ｃｈａｒａｃｔｅｒｉｓｔｉｃｖｅ ｌｏｃｉｔｙｏｆｆｌｏｗ＿ｆｉｅｌｄ;　ｐ:ｉｎｓｔａｎｔａｎｅｏｕｓｆｌｏｗ＿ｆｉｅｌｄｐｒｅｓｓｕｒｅ;　 ｐ:ｍｅａｎ…     

LOAD CAPACITY OF OILFILM——LUBRICATED BALL-BEARING WITH SPIRAL GROOVES

In order to improve load capacity and stability of a fluid moving-pressure bearing, at present, measure of cutting grooves on a turning-shaft is generally adopted.The performances of spiral grooves are better in various groovetypes. Therefore, a theoretical analysis and an experimental investigation of the bearing with spiral grooves attract general attention. But the results of most articles published in china are numerical solutions of the computer. Using the methods of parameter perturbation in the paper, an approaching analytical solution of Reynolds equation of the moving-pressure oilfilm-lubricated ball-bearing with spiral grooves has been obtained. We have combined the numerical solutions of the computer, and the influence of the bearing parameters upon the load capacity is discussed; the optimum values of the groove parameter are obtained. The theoretical conclusion of this paper is in good agreement with the experimental data obtained by 651 Institute.     

Effect of suspended solid particles on unstability of two-dimension mixing layer

I.Intr0ducti0nThereexistsalargenumberofmixinglayernowswithsuspendedparticlesinindustryandagriculture,suchasintheburningcourseofc0alpowderandpowderyfuelandinthemixingcourseofpowderymaterials.Bytheoriticalandexperimenta1researches,wecanlearntheinteractionbe…     

含悬浮固粒的旋转射流剪切层稳定性研究

本文在理想不可压旋转圆射流的运动方程中添加了固粒作用项，由此推得了时间增长率的表达式，进而得关于含悬浮固粒放置射流稳定性的修正瑞利稳定性准则，求出了不同固粒质量密度固－气脉动速度比值，固气脉动速度相位差及Ｓｔｏｋｅｓ数情况下旋转射流场的增长率与径向空间波数的关系曲线，在比较这些曲线的基础上，给出了关于固粒属性对旋转射流场稳定性影响的几个重要结论为控制旋转射流场和后续发展提供了依据。     

The distribution of solid particles suspended in a turbulent flow: A stochastic approach

Basic fluid mechanics and stochastic theories are applied to show that the concentration distribution of suspended solid particles in a direction normal to the mean streamlines of a two-dimensional turbulent flow is greatly influenced by the lift force exerted on them in the vicinity of the wall. Analytic solution shows that, when the direction of the mean flow is horizontal, the probability density functionp (y, t) for random displacements of the particles will have a maximum value at a point from the wall where the perpendicular component of the lift force precisely balances particle gravity. Interpretation of experimental observations is presented using this theory.     

系统压力对含悬浮颗粒油液的影响研究

油液在运行过程中不可避免地会产生颗粒物,影响油液的正常使用,甚至出现设备故障,因而分析含悬浮颗粒油液的动态特征,掌握在不同压力变化条件下油液及颗粒物的变化规律具有重要意义。利用两相流体理论建立了含悬浮颗粒油液的悬浮流动力学模型,通过特征线法进行了数值求解,将数值结果与实验数据比较,具有较好的一致性;根据所建模型,分析了不同系统压力条件下悬浮流中各相的脉动规律。结果表明,流场中各相参数的脉动幅值随着系统压力的增加而增大;管路始端和终端各相参数的脉动时刻分别位于1/4脉动周期(T)的奇数倍和偶数倍处,管路中段各相参数的脉动时刻则位于T/8的奇数倍处;悬浮颗粒速度会受到油液速度拖曳力作用,其变化趋势与油液速度基本一致,颗粒浓度分布与油液压力的变化趋势完全相反。     

Numerical study on the stability and mixing of vertical round buoyant jet in shallow water

IntroductionAsimplewaytodisposeofthelargequantitiesofwasteheatresultingfromsteamelectricpowergeneration ,istodischargetheheatedcondenserwaterthroughasubmergedroundoutfalllocatedatthebottomofthereceivingwater.Inrecentyears,suchkindsofhighvelocityinjectionsystemshaveincreasinglybeenusedaseffectivemixingdevices,frequently ,thesedevicesarelocatedinwatersofonlyafewportdiametersdeep ,anddischargingareaisrelativelysmall.Thusanunderstandingoftheinducedexcesstemperaturedistribution ,inrelationshiptothe…     

悬浮固粒分区存在对射流稳定性的影响

本文利用气固两相耦合模型,理论推导出大雷诺数下悬浮固粒分区存在的射流稳定性方程,通过数值计算得到了固粒存在不同流域时流场扰动放大因子曲线和波速曲线。进而,在分析所得稳定性曲线的基础上,得到了关于固粒充满全流场、存在于射流区及存在于非射流区对流场中扰动增长及扰动传播影响的重要结论。这些结论对气固两相射流场的发展的认识和工程实际中实施对气固两相射流场的人工控制有指导意义。     

超空化条件下液体射流热稳定性研究

基于线性稳定性理论,建立了描述超空化条件下液体射流热稳定性的数学模型,并对数学模型及其求解方法进行了验证;在此基础上,对超空化条件下液体射流与周围气体间的温差对射流稳定性的影响进行了研究。研究结果表明,液体射流与周围气体间存在温差时,射流稳定性变差,扰动波波数范围拓宽,且拓宽的程度随温差的增加有明显加大的趋势;温度扰动对射流稳定性的影响与扰动模式关系不大;温度扰动会在一定程度上削弱超空化对射流稳定性的作用,并有可能完全抑制超空化对扰动波最大波数的作用,只有当超空化达到一定程度后,才能克服温度扰动的抑制作用,使扰动波最大波数变大。     

随从力作用下热弹耦合轴向运动梁的稳定性

研究了切向均布随从力作用下热弹耦合轴向运动梁的稳定性问题。建立了热弹耦合轴向运动梁 在随从力作用下的运动微分方程,采用归一化幂级数法,推导出了2种边界条件下热弹耦合轴向运动梁在随 从力作用下的特征方程。计算了系统的前3阶量纲一复频率,分析了量纲一运动速度、量纲一热弹耦合系数 和量纲一随从力等参数对梁的稳定性的影响。     

Formation and stability of a charged jet in a strong electric field

The shape of a charged jet is determined in the approximation of a strong electric field. The stability of the jet with respect to both axisymmetric and nonaxisymmetric perturbations of the sinusoidal type is investigated in the linear approximation. The domains of predominance of the axisymmetric and bending modes and the longitudinal partition mode are determined. Experimental data on the longitudinal partition of a polymeric jet into several daughter jets are given.     

Variation of velocity profile of jet and its effect on interfacial stability

IntroductionSincenineteencentury ,thestabilityofgas_liquidtwo_phasejethasattractedalotofpeoplefortheoreticalstudybecauseofitswideapplicationsinindustry .Thestabilitybehavioriscloselyrelatedtotheshapeofbasicvelocityprofile,andthevelocityprofilesmeasuredfromexperimentsarenotaccurateenough ,itisworthwhiletostudythevelocitymodelinthenumericalsimulation .Insimplermodels,top_hatprofile[1,2 ]issuggestedasbasicflowfortheinviscidandincompressibleliquidandgas.Tocompareitwithrealisticflow ,Suetal.[3]ass…     

Asymptotic analysis on weakly forced vibration of axially moving viscoelastic beam constituted by standard linear solid model

The weakly forced vibration of an axially moving viscoelastic beam is investigated.The viscoelastic material of the beam is constituted by the standard linear solid model with the material time derivative involved.The nonlinear equations governing the transverse vibration are derived from the dynamical,constitutive,and geometrical relations.The method of multiple scales is used to determine the steady-state response.The modulation equation is derived from the solvability condition of eliminating secular terms.Closed-form expressions of the amplitude and existence condition of nontrivial steady-state response are derived from the modulation equation.The stability of nontrivial steady-state response is examined via the Routh-Hurwitz criterion.     

DYNAMIC STABILITY OF AXIALLY MOVING VISCOELASTIC BEAMS WITH PULSATING SPEED

IntroductionThe class of systems with axially moving materials involves power transmission chains,band saw blades and paper sheets during processing. Vibration of such systems is generallyundesirable. The traveling tensioned Euler-Bernoulli beam is the pr…     

基于初弯曲单元的某弦支穹顶非线性稳定承载力分析

在单元的随动坐标系下,建立了初始弯曲对杆单元轴向刚度影响的计算公式,导出了考虑初始弯曲的非线性杆单元刚度矩阵;从经典的梁-柱理论出发,给出了考虑初始弯曲的非线性空间梁单元切线刚度矩阵推导过程。将建立的初始弯曲单元应用于弦支穹顶结构算例的非线性稳定承载力分析,研究了杆件初始弯曲对结构整体非线性稳定性能的影响,结果表明,杆件初始弯曲的存在会降低结构的整体刚度和极限承载力,而在不同的初始预应力状态下,极限荷载随初始弯曲增加都基本呈线性下降,并且其关系曲线基本平行。本文建立的基于初弯曲单元的非线性分析方法,可推广应用于各种类型空间网格结构的非线性分析,为结构设计方案的选择提供更为科学的依据。     

Rotation speed measurement of moving particles in a CFB riser

This paper presents a study on measuring rotation speed of moving glass beads with an average diameter of 500 p.m in a pilot-scale circulating fluidized bed （CFB） riser with a high-speed digital imaging system. Two methods have been developed to calculate particle rotation speed from the particle images. The first method consists of a fully automated algorithm based on cross-correlation of gray distribution of particle images for particles whose rotation axes are （nearly） perpendicular to the imaging plane, and the second method calculates the speed of particle rotation by identifying its rotation axis using two or more characteristic points on its surface. The reliability of the two methods is verified by using a small sphere with known speed and direction of rotation. The first method is shown to be capable of measuring accurately the rotation speed for the particle with a rotation axis （nearly） perpendicular to the imaging plane and filtering off other particles using an appropriate threshold of correlation coefficient. The second method is shown to be capable of yielding both the speed and direction of particle rotation, with a measurement error of less than 10%. Results of both methods on real glass beads in a CFB riser are compared against each other.     

多孔药型罩聚能射流的稳定性

基于Herrmann改进的Grneisen状态方程,对多孔药型罩受冲击压缩产生的温升进行了估算,从理论上分析了孔隙度对射流断裂时间的影响。使用脉冲X光测试并结合侵彻实验研究了药型罩初始孔隙度为9.3%和11.4%时聚能射流的稳定性。研究结果表明,在一定孔隙度范围内,射流的稳定性随孔隙度的增加而增强。     

Dynamics of large solid particles in bioconvective sedimentation

Settling of one or two large solid particles in a bioconvection flow induced by gyrotactic motile microorganisms is investigated using a 2D numerical model. The results of varying the initial positions of large particles on the bioconvection flow pattern are investigated. The Chimera method is utilized to generate subgrids around the moving particles. It is demonstrated that the introduction of a single large particle displaces bioconvection plume and changes its shape. The introduction of two particles on the same side of the bioconvection plume further displaces the plume while the introduction of two particles on opposite sides reduces this displacement. The influence of the bioconvection plume on the particles' settling paths and particles' settling velocities is investigated. Copyright © 2006 John Wiley & Sons, Ltd.     

Direct numerical simulation of particle dispersion in a turbulent jet considering inter-particle collisions

To investigate the behaviour of inter-particle collision and its effects on particle dispersion, direct numerical simulation of a three-dimensional two-phase turbulent jet was conducted. The finite volume method and the fractional-step projection algorithm were used to solve the governing equations of the gas phase fluid and the Lagrangian method was applied to trace the particles. The deterministic hard-sphere model was used to describe the inter-particle collision. In order to allow an analysis of inter-particle collisions independent of the effect of particles on the flow, two-way coupling was neglected. The inter-particle collision occurs frequently in the local regions with higher particle concentration of the flow field. Under the influence of the local accumulation and the turbulent transport effects, the variation of the average inter-particle collision number with the Stokes number takes on a complex non-linear relationship. The particle distribution is more uniform as a result of inter-particle collisions, and the lateral and the spanwise dispersion of the particles considering inter-particle collision also increase. Furthermore, for the case of particles with the Rosin–Rammler distribution (the medial particle size is set d₅₀ = 36.7 μm), the collision number is significantly larger than that of the particles at the Stokes number of 10, and their effects on calculated results are also more significant.     

Dependence of the stagnation temperature of a jet of gas containing solid particles on the concentration of particles and their velocity

This article gives the results of experiments on the measurement of the stagnation temperature of a two-phase jet, issuing from a nozzle. The experiments were made using a mixture of air and aluminum oxide (particle diameter 50) with a ratio of the mass flow rate of the solid phase to the mass flow rate of the gas equal to 0.3–2.5, and at initial temperatures of the mixture of 150–450°C. It follows from the results of the experiments that the stagnation temperature of a two-phase flow considerably exceeds the temperature of the mixture at the inlet of the nozzle.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 4, pp. 175–176, July–August, 1970.