Spectroscopy of stop bands in magnetic photonic crystals

The shape of the spectra of continuous visible-range radiation reflection from the surface (111) of a globular photonic crystal filled with magnetic materials was determined. The bands observed in the reflectance spectrum correspond to the appearance of stop bands of the photonic crystal. It was shown that position of the intensity maximum in the observed reflectance spectra depends on the type of a magnetic material introduced into photonic crystal pores.     

Estimation of Ordering of the Transverse Structure of Mesoporous Photonic Crystals

Optics and Spectroscopy - Homogeneity of the mesoporous photonic crystal structure is estimated by an electron photograph of its surface. A method of crystal surface division into domains by...     

Opals with a thin-film metallic defect-hybrid colloidal plasmonic photonic crystals

Hybrid photonic crystals consisting of a thin-film opal and a thin profiled gold film situated on the surface or inside the opal have been prepared. The optical transmittance spectra of hybrid crystals have been studied. It has been found that the spectra exhibit minima due to diffraction resonances in the photonic crystal and bands of enhanced transmission due to transfer of radiation through the metal film surface by plasmon polaritons. It has been shown that the transmittance spectra of hybrid crystals with a metal film on the surface are subjected to a stronger modification than the hybrids having a metal film inside the crystal.     

New approaches for the fabrication of photonic structures of nonlinear optical materials

We revisited two different strategies to fabricate 1D photonic crystals of nonlinear optical dielectric materials based on ultrafast laser ablation of the surface of an RbTiOPO₄ crystal, and selective etching of ferroelectric domains of the surface of a periodically poled LiNbO₄ crystal. We evaluated their behaviour as Bragg diffraction gratings. We also presented the recent advances we developed in a new procedure of fabrication of 2D and 3D photonic crystals of KTiOPO₄ (KTP) grown on the surface of a KTP substrate by liquid phase epitaxial means within the pores of a silicon macroporous template. Optical, structural, morphological, and compositional characterization for the photonic crystals produced through this technique are presented.     

Surface Tamm states in a photonic crystal slab with asymmetric termination

The reflection and transmission spectra of a finite thickness 2D photonic crystal slab (PCS) based on macroporous silicon are investigated. Periodic photonic crystal region is separated from air by homogeneous silicon interfacial layers. These interfacial layers at the silicon/air boundary being defects of the photonic crystal lattice, define the properties of surface Tamm states in the photonic stop‐bands (PSBs). It is demonstrated experimentally and theoretically that the reflection spectra of a structure with different thicknesses of the interfacial layers on both sides of the PCS depend on the illuminated side. At the same time, the transmission spectra are identical for both light directions in agreement with the reciprocity principle. Analysis shows that the dependence of the reflection spectrum on the side of light entrance is due to scattering losses in the real structure. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Gold film-terminated 3-dimensional photonic crystals

Hybrid metal-dielectric photonic crystals assembled from an opal film coated by a gold film are designed in order to realize optical spectra that emanate from mixing Bloch modes in the opal and surface plasmon polaritons in corrugated gold films. The photonic crystal provides a spatial template for the gold film profile and modifies the electromagnetic vacuum in the vicinity to the gold layer. Reflectance spectroscopy was applied to deconvolute the plasmonic and photonic bandgap components in the optical response of hybrid crystals as opposite to their mixed appearance in the transmission spectra.     

Effect of dimensionality on the spectra of hybrid plasmonic-photonic crystals

Based on colloidal crystals of various dimensionality, hybrid metal-dielectric plasmonic-photonic heterocrystals have been prepared. It has been shown that the spectra of optical transmission of heterocrystals are mostly controlled by the sum of contributions of composing plasmonic and photonic crystals. At the same time, there are a number of phenomena caused by the mutual effect of heterostructure components, which lead to a deviation of observed optical properties from the linear superposition of responses of these crystals. In particular, it has been found that the anomalous transmission controlled by the plasmonic crystal decreases with increasing the dimensionality of the photonic crystal attached to it. At the same time, light reflection on a metallized surface changes light diffraction in photonic crystals and leads to Fabry-Perot oscillation amplification. It has been assumed that an intermediate layer is formed, in which Bloch modes of the photonic crystal and surface plasmon-polaritons of the plasmonic crystal are hybridized.     

Optical properties of mesoporous one-dimensional photonic crystals

The systematic features in the reflectance spectra of broadband optical radiation from the surface of one-dimensional photonic crystals based on mesoporous structures are presented. The dispersion dependence for electromagnetic waves in the mesoporous one-dimensional photonic crystal is established. On its basis, reflectance and transmittance spectra are calculated for particular structures, and the microscopic parameters of the samples under study are determined. The developed theory is used to explain the shape of reflectance spectra in mesoporous photonic crystals based on silicon, quartz, and aluminum oxide.     

孔雀羽毛不同色区的色彩分析

孔雀羽毛是生物结构色的典型代表。作者采用扫描电镜和光纤光谱仪观察了羽毛表面结构和反射光谱,低倍SEM表面观察结果表明孔雀尾羽“眼斑”处艳丽的色彩源于光子晶体的微结构特性,不同的色彩部位源于微结构不同的表面形状及不同的结构周期;反射光谱表明,反射光谱的峰位随着入射角度的改变而改变,填充液填充后反射峰位发生移动。该研究为制作类似孔雀羽毛光子晶体结构的功能复合材料提供了依据。     

Diffraction mechanism of specular reflection of light from photonic crystals

The spectra of specular reflection and diffraction of light for a resonant two-dimensional photonic crystal consisting of semiconductor cylinders embedded in a dielectric matrix, as well as the exciton-polariton band structure of this crystal, are studied theoretically. It is shown that specular reflection of light from a photonic crystal can be considerably enhanced by diffraction in the photonic crystal and reflection from its inner boundary with vacuum.     

Spectral properties of a one-dimensional resonant photonic crystal

The eigenexcitation and transmission spectra of a one-dimensional resonant photonic crystal are studied for TM and TE polarized electromagnetic waves. The crystal considered is a layered structure consisting of alternating isotropic layers and layers of a resonantly absorbing gas. The performed calculations show that the band structure of the spectra of the resonant photonic crystal significantly changes as the angle of incidence and the density of the resonant gas are varied. The structure of the spectra of additional transmission in the bandgap of the resonant photonic crystal is studied taking into account the decay of electromagnetic modes. The possibilities of controlling the spectrum of electromagnetic modes are indicated.

     

Design of leaky modes of two-dimensional photonic crystal slabs to enhance the luminescence from Er3N@C80 fullerenes

We develop an effective way to engineer a two-dimensional GaAs photonic crystal slab with its leaky eigenmodes at desired wavelengths by investigating its spectral dispersion, particularly in terms of transmission efficiency spectra at different launch angles of the light beam. Structural parameters for the photonic crystal slab with leaky eigenmode wavelengths at both 1492 nm and 1519 nm are obtained. This may lead to the enhanced luminescence from erbium-doped trinitride-template fullerenes (Er₃N@C₈₀) on the surface of the photonic crystal slabs.     

Influence of Light Scattering on Transmission Spectra of Photonic Crystals of Anodized Alumina

The light scattering is found to have a great influence on the transmission spectra of photonic crystal of anodic alumina. The incident light is diffracted by a regular array of branched channels or pores obeying the Bragg law. The intensity of transmission light decreases with the increasing etching time because of the increasing porosity or enlarging scatterers. The variation of intensity and widths of dips in transmission spectra of the porous alumina membrane versus the incidence angle shows the quite different characteristics from the other photonic crystal such as colloidal photonic crystal.     

Temperature dependence of the photonic bandgap and the orientational order parameter for a cholesteric photonic crystal

The reflection spectra of a cholesteric photonic crystal have been measured. The experimental spectra are described by a theoretical expression that follows from the analytical solution of the Maxwell equations. The photonic bandgap width Δν has been determined. The photonic bandgap width changes abruptly as the position of the diffraction band changes. The temperature dependence of the relative bandgap width Δν/ν₀ and the order parameter for a photonic crystal are described by Landau’s theory of phase transitions.     

微波光子晶体的实验研究

制造了工作于微波波段的三角形光子晶体,并测量了光子晶体的透射谱和存在缺陷时的光子晶体的透射谱。在此基础上,研究了它的缺陷模,并讨论了光子晶体的潜在应用     

Luminescence spectra of a cholesteric photonic crystal

The transmission and luminescence spectra of a cholesteric photonic crystal doped with an organic dye are measured. The density of photon states is calculated using the material parameters obtained from the comparison of the experimental and theoretical spectra. The shape of the luminescence spectra is modified with respect to the density of photon states owing to the difference in the structure of the normal modes of the photonic crystal near the short-wavelength and long-wavelength edges of the photonic quasi-band gap upon the “pushing” of the photon states from the gap and to the nonvanishing orientation ordering of the luminescent molecules. The luminescence spectrum calculated taking into account the chiral structure of the photonic crystal agrees with the experimental spectrum.     

Beaming of light and enhanced transmission via surface modes of photonic crystals

We report beaming and enhanced transmission of electromagnetic waves by use of surface corrugated photonic crystals. The modes of a finite-size photonic crystal composed of dielectric rods in free space have been analyzed by the plane-wave expansion method. We show the existence of surface propagating modes when the surface of the finite-size photonic crystal is corrugated. We theoretically and experimentally demonstrate that the transmission through photonic crystal waveguides can be substantially increased by the existence of surface propagating modes at the input surface. In addition, the power emitted from the photonic crystal waveguide is confined to a narrow angular region when an appropriate surface corrugation is added to the output surface of the photonic crystal.     

Calculation of Angular-Dependent Reflectance and Polarimetry Spectra of Nanoporous Anodic Alumina-Based Photonic Crystal Slabs

Calculations of angular-dependent reflectance and polarimetry spectra of nanoporous anodic alumina-based two-dimensional photonic crystal slabs are presented. The calculations are obtained using a scattering matrix numerical model that gives the polarization change as a function of the incidence angle and of the wavelength. The results reveal that the incident light can couple to several modes propagating in the photonic crystal slab at different angles with respect to the sample surface, and that the number of these modes increases with increasing pore depth. Two different lattice structures are studied: triangular and square. For the triangular lattice the off-diagonal components of the Jones Matrix show a certain amount of cross-polarization, while for the square lattice, there is no cross-polarization.     

Enlargement of complete two-dimensional band gap by using photonic crystal heterostructure

A two-dimensional photonic crystal heterostructure, which consists of two photonic crystals of a square lattice of circular columns with reverse dielectric configurations, is proposed. Photonic band gap properties are calculated using a plane-wave method and the transmission spectra are obtained. After optimization, the relative width of the complete band gap reached 13.8% based on the simple unit-cell shape and crystal lattice. The photonic crystal heterostructure opens up new ways of engineering photonic band gap materials and designing photonic crystal devices.     

Tuning of the photonic band gaps and the reflection spectra of a one-dimensional photonic crystal based on silicon and a liquid crystal

The reflection spectra and the photonic band gaps of a one-dimensional composite photonic crystal are calculated for different filling factors (the ratio of the thickness of a silicon layer to the lattice constant A). A change in the refractive index of the filler in a photonic crystal leads to the shift of both edges for certain side photonic bands. It is shown that, with a change in the refractive index from 1.49 to 1.69, the shift of the edges (the tuning effect) can reach the value A/λ = 0.04 for the main photonic band and 0.08 for a side band. An additional criterion for designing a photonic crystal is the estimation of the sharpness of the edges of photonic bands in the reflection spectra.