Coumarin-based Fluorescent Probes for H2S Detection

Although hydrogen sulfide (H₂S) has been known as a toxic gas with unpleasant rotten egg smell, the correlation between H₂S and physiological processes has attracted scientists to develop brand new methods to monitor such a gaseous molecule in vitro and in vivo. Herein, we described a couple of coumarin-based fluorescent probes (1a and 1b) that can be activated by reduction of azide to amine in the presence of H₂S. It should be emphasized that probe 1b demonstrated high selectivity and sensitivity for H₂S over other relevant reactive sulfur species in vitro, as well as identified exogenous H₂S in living cells.     

Studies of Benzothiazole and Benzoselenazole Squaraines as Fluorescent Probes for Albumins Detection

Series of squaraine benzothiazole and benzoselenazole dyes were studied as possible fluorescent probes for the detection of proteins, particularly albumins. It was shown that majority of the studied squaraines give significant fluorescent response on the human serum albumin (HSA) and bovine serum albumin presence. For squaraine dyes with N-hexyl pendent groups (P-1, P-2, P-3, P-5) about 100−540-fold fluorescence intensity increase upon albumins addition was observed. At the same time in presence of other proteins, namely insulin, avidin from hen egg white, immunoglobulin G (IgG), carbonic anhydrase fluorescence enhancement values were considerably lower —up to 43 times in IgG presence. It was noted that generally, squaraines with long N-hexyl pendent groups demonstrate higher emission increase values upon proteins addition comparing with their analogues with short N-ethyl tails. It was shown that fluorescence intensity enhancement for benzothiazole squaraine dye P-3, relates linearly to the HSA concentration over the wide range—from 0.2 to 500 μg/ml. Together with noticeable selectivity of this dye to albumins, existence of wide dynamic range gives possibility to propose P-3 dye as probe for HSA quantification.     

Highly Selective Detection of Al3+ by Carboxamide-Based Fluorescent Chemosensor

We designed a carboxamide-based fluorescent chemosensor HTPQ ((E)-2-(((8-hydroxy-2,3,6,7-tetrahydro-1H,5H-pyrido[3,2,1-ij]quinolin-9-yl)methylene)amino)thiophene-3-carboxamide) for detecting Al³⁺. HTPQ could probe Al³⁺ by fluorescence enhancement. Limit of detection for Al³⁺ toward HTPQ was 1.4 μM. Binding of HTPQ to Al³⁺ was determined to be a 1:1 ratio with the analysis of Job plot and ESI-mass. In addition, HTPQ was able to detect Al³⁺ using the test strip by fluorescent variation. The sensing process of Al³⁺ by HTPQ was presented by UV–vis titration, ESI–MS, Job plot, ¹H NMR titration and DFT calculation.

     

Styryl Dyes as Two-Photon Excited Fluorescent Probes for DNA Detection and Two-Photon Laser Scanning Fluorescence Microscopy of Living Cells

Spectral-fluorescent properties of benzothiazole styryl monomer (Bos-3) and homodimer (DBos-21) dyes in presence of DNA were studied. The dyes enhance their fluorescence intensity in 2–3 orders of magnitude upon interaction with DNA. Studied styrylcyanines in DNA presence demonstrate rather high values of two-photon absorption (TPA) cross-section, which are comparable with the values of TPA cross section of the rhodamine dyes. An applicability of the styrylcyanines as probes for the fluorescence microscopy of living cells was studied. It was shown that both dyes are cell-permeable but homodimer dye DBos-21 produces noticeably brighter staining of HeLa cells comparing with monomer dye Bos-3. Molecules of DBos-21 initially bind to the nucleic acids- containing cell organelles (presumable mitochondria) and are able to penetrate into the cell nucleus. Thus, homodimer styryl DBos-21 dye is viewed as efficient stain for single-photon and two-photon excitation fluorescence imaging of living cells.     

Indole-based Fluorescent Sensors for Selective Detection of Hg2+

A series of indole-based fluorescent chemosensors 1–4 were prepared and investigated characteristick features with transition metal ions. Sensors 1 and 2 were selective for Hg²⁺ ion among a series of metal ions in H₂O–DMSO with association constants of 4.60×10⁴ and 5.90×10⁴?M^?1 and detection limits of 140 and 101.6 μM, respectively.

The Development of a 4-aminonaphthalimide-based Highly Selective Fluorescent Probe for Rapid Detection of HOCl

Journal of Fluorescence - Recently, more and more evidence indicated that intracellular HOCl plays a crucial role in the regulation of inflammation and apoptosis, while excessive HOCl has an impact...     

A Novel Fluorescent Probe for the Highly Selective and Sensitive Detection of Palladium in Aqueous Medium

Based on the Pd⁰-catalyzed Tsuji-Trost allylic oxidative insertion reaction, we developed a fluorescent probe PdL1 for sensing Pd⁰. As expected, probe PdL1 exhibited high selectivity and excellent sensitivity in both absorbance and fluorescence detection of Pd⁰ in CH₃CH₂OH/PBS (10 mM, pH = 7.4, 6:4, v/v) solution. The detection limit was calculated to be as low as 15 nM, which can meet the selective requirements for practical application.     

Performance of 2-Hydroxy-1-Naphthaldehyde-2-Amino Thiazole as a Highly Selective Turn-on Fluorescent Chemosensor for Al(III) Ions Detection and Biological Applications

Journal of Fluorescence - The thiazole based Schiff base 2-hydroxy-1-naphthaldehyde-2-amino thiazole (receptor1) was synthesized through a single step process and characterized by spectroscopic and...     

A Highly Selective Fluorescent Probe for the Detection of Nitroreductase Based on a Naphthalimide Scaffold

The development of fluorescent probes for nitroreductase (NTR) has received intense attention because of its biological significance and wide application. In this work, a novel fluorescent probe for the detection of NTR in aqueous solution was designed and synthesized on a 1,8-naphthalimide scaffold. In the presence of NTR and nicotinamide adenine dinucleotide (NADH) under physiological conditions, the probe was converted into a 4-hydroxy-1,8-naphthalimide derivative and exhibited a sharp fluorescence enhancement at 550 nm, with a high selectivity for NTR over various analytes. The detection limit for NTR was determined to be 9.8 ng/ml by this probe. Due to its low signal background, this probe showed?>?70-fold fluorescence enhancement. Theoretical calculations revealed that the reason for the fluorescence quenching of this probe is the photoinduced electron transfer (PET) from both the nitrobenzene and morpholine groups to the naphthalimide fluorophore.

     

A Highly Selective Fluorescent Probe for Detection of Biological Samples Thiol and Its Application in Living Cells

Probe 1 was designed and synthesized as a new fluorescent molecular probe for thiols in PBS buffer at physiological condition. This fluorescent molecular probe consists of a thiol reaction moiety bound to a coumarin fluorophore. Its fluorescence quantum yield is low, but a drastic enhancement of fluorescence intensity was observed in the presence of thiols. Possible interference with other analytes was examined. Probe 1 displays a highly selective fluorescent enhancement with thiols, and the probe was successfully applied to thiols determination in intracellular, in human urine and blood samples.     

A Significant Fluorescent Aptamer Sensor Based on Carbon Dots and Graphene Oxide for Highly Selective Detection of Progesterone

In this paper, a fluorescent aptamer sensor was constructed based on the carbon dots (CDs) and graphene oxide (GO). This sensor combines the excellent fluorescence performance of CDs with the high specificity of aptamer, which can detect progesterone (P₄) with high sensitivity and selectivity. In the absence of P₄, the CDs-aptamer system and GO form a fluorescence resonance energy transfer process (FRET), which quenches the fluorescence of the CDs. When P₄ is added, the aptamer specifically binds to it, resulting the fluorescence of the CDs is recovered. At optimal conditions, the fluorescence intensity recovered by the CDs has a linear relationship with the concentration of P₄ in the range of 0.1–120 nM and the detection limit is 3.3?×?10^–11 M. Besides, the sensor has satisfactory detection results of P₄ in milk, indicating that constructed method has enormous potential for application in food safety.

     

Semiconducting Polymer Nanoparticles as Fluorescent Probes for Biological Imaging and Sensing

In recent years, semiconducting polymer nanoparticles have emerged as a new class of extraordinarily bright fluorescent probes. These polymer nanoparticles, which are primarily composed of π‐conjugated polymers, exhibit a variety of outstanding features, including exceptional fluorescence brightness, fast radiative rate, good photostability, facile surface functionalization, and low cytotoxicity. These advantageous characteristics make polymer nanoparticles highly promising for applications in biological imaging and sensing. This progress report highlights recent advances in the synthesis, characterization, and applications as bio‐labels or sensors of these highly emissive organic nanoparticles.     

A Sensitive Schiff-Base Fluorescent Chemosensor for the Selective Detection of Zn2+

A Schiff-base fluorescent probe – N, N^/-bis(salicylidene) trans 1, 2 – diaminocyclohexane (H ₂ L) was synthesized and evaluated as a chemoselective Zn²⁺ sensor. Upon treatment with Zn²⁺, the complexation of H ₂ L with Zn²⁺ resulted in a bathochromic shift with a pronounced enhancement in the fluorescence intensity in ethanol solution. Moreover, other common alkali, alkaline earth and transition metal ions failed to induce response or minimal spectral changes. Notably, this chemosensor could distinguish clearly Zn²⁺ from Cd²⁺. The stoichiometric ratio and association constant were evaluated using Benesi – Hildebrand relation giving 1:1 stoichiometry. This further corroborated 1:1 complex formation based on Job’s plot analyses.     

检测活性氧的荧光探针新进展

活性氧对于人体是十分重要的。然而,过量的活性氧是相当有害的,它们会对人体产生氧化损伤,导致细胞死亡。活性氧现在已经引起了化学、生物、医药等多个领域学者的浓厚兴趣,它们被认为和多种病理条件有密切的联系。由于活性氧寿命短、反应活性高,并且大部分都存在于体内很难被捕获,因此它们的分析测定是一项国际性难题。荧光探针作为活性氧的高灵敏的检测分析物,已经得到越来越广泛和深入的研究。由于每一种活性氧都有它独特的生理学活性,因此设计高选择性的,能够检测具体一种活性氧的荧光探针分子就显得十分重要。本文主要对近三年来检测单线态氧、过氧化氢、超氧阴离子和羟自由基这四种活性氧的荧光探针的研究进展进行综述,关注这类荧光探针的检测机理以及具体应用。     

A Highly Selective Fluorescent Chemosensor for Detecting Indium(III) with a Low Detection Limit and its Application

A highly selective chemosensor BHC ((E)-N-benzhydryl-2-((2-hydroxynaphthalen-1-yl)methylene)hydrazine-1-carbothioamide) for detecting indium(III) was synthesized. Sensor BHC can detect In(III) by a fluorescence turn-on method. The detection limit was analyzed to be 0.89 μM. Importantly, this value is the lowest among those previously known for fluorescent turn-on In(III) chemosensors. Based on the analytical methods like ESI-mass, Job plot, and theoretical calculations, the detection mechanism for In(III) was illustrated to be chelation-enhanced fluorescence (CHEF) effect. Additionally, sensor BHC was successfully applied to test strips.     

Stilbene-Like Molecules as Fluorescent Probes Applied for Monitoring of Polymerization Process

2-(p-N,N-dimethylaminostyryl)benzoxazole (OS), 2-(p-N,N-dimethylaminostyryl)-benzothiazole (SS) and 2-(p-N,N-dimethylaminostyryl)naphtiazole (PS) were prepared and their absorption and fluorescence spectra were measured in various solvents at room temperature. On the basis of the solvatochromic behavior the ground state (μ_g) and excited state (μ_e) dipole moments of these pN,N-dimethylaminostyryl derivatives were evaluated. The dipole moments (μ_g and μ_e) were estimated from solvatochromic shifts of absorption and fluorescence spectra as function of the dielectric constant (ɛ) and refractive index (n) of applied solvents. The absorption spectra only slightly are affected by the solvent polarity in contrast to the fluorescence spectra that are highly solvatochromic and display a large Stokes shift. The analysis of the solvatochromic behavior of the fluorescence spectra as function of Δf (ɛ, n) revealed that the emission occurs from a high polarity excited state. The large dipole moment change along with the strongly red-shifted fluorescence, as the solvent polarity is increased, demonstrate the formation of an intramolecular charge transfer state (ICT). Compounds under the study were used as fluorescence probes for monitoring the kinetics of polymerization. The study on the changes in fluorescence intensity and spectroscopic shifts of studied compounds were carried out during thermally initiated polymerization of methyl methacrylate (MMA) and during photoinitiated polymerization of 2-ethyl-2-(hydroxymethyl)propane-1,3-diol triacrylate (TMPTA).     

A Highly Fluorescent Pyrene-Based Sensor for Selective Detection Of Fe3+ Ion in Aqueous Medium: Computational Investigations

In this work, we introduce a highly selective and sensitive fluorescent sensor based on pyrene derivative for Fe(III) ion sensing in DMSO/water media. 2-(pyrene-2-yl)-1-(pyrene-2-ylmethyl)-1H-benzo[d]imidazole (PEBD) receptor was synthesized via simple condensation reaction and confirmed by spectroscopic techniques. The receptor exhibits fluorescence quenching in the presence of Fe(III) ions at 440 nm. ESI–MS and Job’s method were used to confirm the 1:1 molar binding ratio of the receptor PEBD to Fe(III) ions. Using the Benesi-Hildebrand equation the binding constant value was determined as 8.485?×?10³ M^?1. Furthermore, the limit of detection (LOD, 3σ/K) value was found to be 1.81 µM in DMSO/water (95/5, v/v) media. According to the Environmental Protection Agency (EPA) of the United States, it is lower than the acceptable value of Fe³⁺ in drinking water (0.3 mg/L). The presence of 14 other metal ions such Co²⁺, Cr³⁺, Cu²⁺, Fe²⁺, Hg²⁺, Pb²⁺, K⁺, Ni²⁺, Mg²⁺, Cd²⁺, Ca²⁺, Mn²⁺, Al³⁺, and Zn²⁺ did not interfere with the detection of Fe(III) ions. The fluorescence life-time of the receptor PEBD with and without Fe³⁺ ion was found to be 1.097?×?10^?9 s and 0.9202?×?10^?9 s respectively. Similarly, the quantum yield of the receptor PEBD with Fe³⁺ and without Fe³⁺ ion was calculated, and found as 0.05 and 0.25 respectively. Computational studies of the receptor PEBD were carried out with density functional theory (DFT) using B3LYP/ 6-311G (d, p), LANL2DZ level of theory.

Graphical Abstract

     

Fluorescent Carbon Dot as Nanosensor for Sensitive and Selective Detection of Cefixime Based on Inner Filter Effect

Here a simple and sensitive fluorescent assay for detecting Cefixime based on inner filter effect (IFE) has been proven, which is conceptually different from the previously reported CEF fluorescent assays. In this sensing platform, fluorescent carbon dots (CDs) were prepared by one-pot synthesis and was directly used as fluorophore in IFE. The method is based on the complexation reaction between cefixime and palladium ion in the presence of acidic buffer solution (pH 4). The Pd(II)-CEFcomplex was capable of functioning as a powerful absorber in IFE to influence the excitation of fluorophore (CDs). Production Pd(II)-CEFcomplex induced the absorption band transition from 310 to 400 nm, which resulted in the complementary overlap with the excitation spectra of CDs. Due to the competitive absorption, the excitation of CDs was significantly weakened, resulting in the quenching of CDs. The present IFE-based sensing strategy showed a good linear relationship from 0.2 × 10^?6 M to 8 × 10^?6 M (R² = 0.987) and provided an exciting detection limit of 0.5 × 10^?7 (3δ/slope). The proposed method has been successfully applied for the determination of cefixime in raw milk and human urine samples.