Study of the magnetorheological response of aqueous magnetite suspensions stabilized by acrylic acid polymers

In this paper we describe the magnetorheological (MR) behavior of aqueous suspensions consisting of magnetite particles stabilized by poly(acrylic acid) polymers (PAA). A previous work on the colloidal stability of the same systems for different pH values and polymer concentrations demonstrated that the addition of PAA polymers has a very significant effect on the stability. In the present contribution, we study the MR effect of the suspensions stabilized by two different commercial polymers, as a function of pH, magnetic field strength and magnetite volume fraction. All the results are discussed in terms of the interfacial properties of the systems. It is demonstrated that for a given concentration of micrometer particles, the rheological response strongly depends on pH, on the volume fraction of magnetite particles, on the type of polymer added for increasing the stability and on the magnetic field strength. Changing the polymer used provokes clear rheological differences for the same sample conditions (field strength, volume fraction and pH). This is suggested to be due to the hydrophobic/hydrophilic balance of the polymer affecting the magnetic field ability to form magnetic structures by aggregation of the magnetized particles. The results are compared to the predictions of the so-called standard chain model, based on the assumption that the MR effect is the result of the balance between the magnetic interactions (tending to establish some degree of order in the suspension by formation of particle chains in the direction of the field) and hydrodynamic ones (tending to destroy the formed structures by viscous stress on the chains). It is found that the behavior of the yield stress does not agree well with the predictions of the model when the relative proportion of both particle and polymer confers optimum stability to the dispersions. This is likely due to the fact that the presence of the stabilizing polyelectrolyte provokes that the magnetic field is not as effective in structuring the suspension as deduced from the chain model.     

Interpolymer complex formation of some nonionogenic polymers with linear and crosslinked polyacrylic acid

The formation of interpolymer complexes on the surface of crosslinked poly (acrylic acid) with some nonionogenic polymers is compared with the complex formation in analogous linear polymer systems. The behavior of these systems is compared with that of complexes of two oppositely charged polyelectrolytes. The concentration redistribution of the linear polymer in the system polyelectrolyte network-polymer solution and the degree of swelling of this network in these solutions were determined. © 1994 John Wiley & Sons, Inc.     

Reversible flocculation of silica suspensions by water-soluble polymers

The possibility to concentrate, then redisperse colloidal suspensions is not only of great theoretical interest, but is also relevant to the industrial process of solid-liquid separation, which must often be followed by a redispersion stage. Up to now, these consecutive operations were unrealizable in the presence of polymers, since flocculation and adsorption were generally considered irreversible in this case. Previous studies have pointed out the occurrence of two main flocculation mechanisms: charge neutralization and interparticle bridging. The use of copolymers makes it possible to take into account these two different mechanisms together. Using this fact we prepared new copolymers of acrylamide with N-vinylimidazole via radical polymerization and characterized them by light scattering, viscometry, potentiometric titrations, and UV studies. One peculiarity of the chosen system is its dependence on pH: actually the degree of neutralization of such cationic polyelectrolytes does vary with pH, especially near the pK value. This paper shows that these copolymers may induce reversible flocculation of negatively charged suspensions, e.g., silica suspensions, by simple pH adjustment. Performances of the system were followed by various physico-chemical methods. The observed results are explained in terms of flocculation mechanisms as a function of pH.     

Stabilization of solid/liquid suspensions

The stability of colloidal graphite dispersions was investigated. A mixed stabilizer (CELAD) consisting of a non-ionic cellulose derivative and an anionic polymer was used to facilitate the grinding process and to stabilize the aqueous dispersions. Measurements of turbidity, ultramicroscopy and scanning electron microscopy were carried out to determine the size of the particles. Adherent films were obtained by spraying the dispersions onto glass plates. The 20 μm thick films had an electrical resistance within the 20–40 Ω cm range. They proved to be suitable for spray application onto the exernal glass cone of cathode ray tubes.     

Viscosity behavior of silica suspensions flocculated by associating polymers

Associating polymers are hydrophilic long-chain molecules containing a small number of hydrophobic groups, and act as flocculants in aqueous suspensions. The effects of associating and nonassociating polymers on viscosity behavior are studied for silica suspensions. Since flocculation is induced by polymer bridging, the viscosity behavior is converted from Newtonian to shear-thinning profiles. The additions of surfactant cause an increase in viscosity for suspensions prepared with associating polymer, whereas the flow behavior of suspensions with nonassociating polymer is not significantly influenced. In adsorption of associating polymers onto silica particles, the chain may adopt a conformation with a water-soluble backbone attached to the particle surfaces. The hydrophobic groups extending from the chains adsorbed onto different particles can form a micelle by association with surfactant. Therefore, the bridging flocculation is enhanced by surfactant. The cooperative micellar formation between associating polymer and surfactant is responsible for viscosity increase in suspensions.     

Stabilization of small unilamellar DMPC-liposomes by uncharged polymers

 Polymer-free and polymer-bearing small unilamellar (SUV) liposomes from dimyristoyl-phosphatidylcholine (DMPC) were prepared under standardized conditions. Polymer-bearing liposomes were formed by incorporating an uncharged polymer [hydrolyzed poly(vinyl alcohol) (PVA), poly(vinyl alcohol-co-vinylacetal) (PVA-Al), poly(vinyl alcohol-co-vinyl propional) (PVA-Prol) poly(vinyl alcohol-co-vinyl butiral) (PVA-Bul) copolymer or poly(vinyl pyrrolidone) (PVP)] into the membrane bilayer of vesicles. The kinetic (long-term) stability of the liposome dispersions stored in distilled water, in physiological NaCl solution and at various pH values, respectively, were studied. The physical stability of vesicles was tested by measuring the size and the zeta potential of liposomes by means of a Malvern Zetasizer 4 apparatus. It was shown that most of these polymers are effective steric stabilizers for the DMPC-liposomes. Among the polymers, the PVA-Bul and PVA-Prol copolymers and the PVP of high molecular mass exhibited the most efficient stabilizing effect at each pH studied, indicating that the formation of a relatively thick polymer layer around the lipid bilayers ensures an enhanced and prolonged physical stability of liposomes. Also, the butiral or propional side chain in the PVA-based copolymers presumably promotes the anchoring of macromolecules to the vesicles. Using these macromolecules, the colloidal interactions between vesicles can be modified and so the physical stability of liposomes and the kinetic stability of liposome dispersions can also be controlled. Received: 20 May 1997 Accepted: 03 September 1997     

Equilibrium sorption of sulfuric acid by weakly basic polyacrylic anionites

The sorption of sulfuric acid on Amberlite IRA 67 and (2) Lewatit VP.OC.1072 weakly basic polyacrylic anionites in the free-base form was studied. It was demonstrated that the bisulfate form of the anionites was not produced. In contrast to the sorption of hydrochloric acid, the solution of resinates formed during the sorption of sulfuric acid is nonideal. A model of exchange of doubly charged anions on fixed singly charged ion-exchange sites of polyacrylic anionites was developed based on the theory of ion-exchange equilibria. The model was used to analyze the isotherms of equilibrium sorption of sulfuric acid on IRA 67 and Lewatit VP.OC.1072 anionites in the free-base form.     

ESR spectra of irradiated polyacrylic acid

In view of the interest in acrylic acid co-polymerized with other polymers by radiation to promote enhanced crosslinking, a knowledge of the intermediate reaction products is highly desirable. ESR techniques have been used to study the nature and stability of the radicals formed. Acrylic acid was polymerized by exposure to gamma radiation; the nature of the radicals, their decay at various temperatures, and the effect of inhibitors were investigated.The ESR spectrum at room temperature is similar to that described by earlier workers; its dependence on temperature and impurities, as well as its decay, were investigated. From this work, there is reason to believe that the described triplet also contains a central singlet of ΔH_ms19 G; the addition of impurities to the acrylic acid causes the triplet to decay more rapidly, thus leaving the predominant singlet mentioned above. It was also found that the lines in the outer “wings” of the irradiated specimen disappear on heating; at the same time a new line, possibly a singlet of ΔH_ms131 G, either became more intense or more obvious. Some tentative explanations of this behaviour are advanced.     

Gamma-resonance investigation of iron-containing polyacrylic acid

Journal of Structural Chemistry -     

Stabilization of vesicular and supported membranes by glycolipid oxime polymers

We report herein new synthetic glycolipid dimers and polymers that provide unprecedented stability to both supported (SLBs) and vesicular lipid bilayers against dehydration and serum exposure. These novel physical properties will enable pharmaceutical delivery and development of SLB bioanalytical devices.     

Diffusion in polyacrylic acid aqueous solutions

The four diffusion coefficients for the ternary system polyacrylic acid (mol. weight 5000)-polyacrylic acid (mol. weight 115000)-water have been measured at 25°C and at one average polyelectrolytes concentration. The experimental values of main and cross terms have been briefly discussed. The large cross term D ₁₂ in the system with water as solvent shows that, contrary to intuition, different molecular weight species do interact with each other.     

Study of cross-linking parameters of polyacrylic acid hydrogels

Swelling of modified polyacrylic acid hydrogels under conditions of a photoinitiated polymerization of acrylic acid to give a sealing hydrogel for fireproof multiple glazing units was studied. Mechanisms by which cross-links are formed in the gel are suggested and the possibility of controlling the degrees of swelling and cross-linking is discussed.     

Adsorption of polyacrylic acid and polyacrylamide on montmorillonite

The effect of process duration, temperature, and concentration on the adsorption of polyacrylic acid and polyacrylamide by montmorillonite is studied. It is shown that the pattern of interaction of the studied polyelectrolytes with the sorbent surface is determined by the nature of the polymers, the prevalence of acid-base sites, and the pore structure of the mineral.     

High-temperature degradation of polyacrylic acid in aqueous solution

Poly(acrylic acid) (PAA) was decarboxylated in aqueous solution as a function of pH and ionic strength in the temperature range 100–350°C. Degradation kinetics were first order with respect to acid functionality. The rate of decarboxylation at high pH (E_α = 51.1 kcal/mol) was much slower than that at low pH (E_α = 20.3 kcal/mol). At intermediate pH, the reactivity was found to depend on the degree of dissociation of PAA as a functions of ionic strength, pH, and temperature. No monomer was observed in the reaction product. © 1996 John Wiley & Sons, Inc.     

The dynamics of sorption of sulfuric acid by weakly basic polyacrylic anion exchangers

The nonequilibrium dynamics of sorption of sulfuric acid by free base forms of Amberlite IRA-67 and Lewatite VP.OC.1072 weakly basic anion exchangers is studied. It is established that, in hydrodynamic regimes of filtration, which are typical of OH filters of the first stage of water-desalting plants, the limiting stage of sorption kinetics is inside diffusion. It is concluded that the process is correctly described by an asymptotic solution to the inside-diffusion model of sorption dynamics. Original Russian Text ? A.V. Mamchenko, T.V. Kushnir, 2009, published in Zhurnal Fizicheskoi Khimii, 2009, Vol. 83, No. 5, pp. 967–971.     

Behavior of metal complexes of polyacrylic acid in solutions

Metal complexes of polyacrylic acid containing Li, Li, and Cu, or Li and Zn have been studied in saline aqueous solutions using molecular hydrodynamics and light scattering methods. Intrinsic viscosities, weight-average molar masses, hydrodynamic radii, and radii of gyration were obtained. It was shown that the macromolecules of polymetalloacrylates containing divalent metals form small and large supramolecular structures, their dimensions, and composition being dependent on the ionic strength of the solution.     

Taste sensing with polyacrylic acid grafted cellulose membrane

There are reports of fabrication of taste sensor by adsorbing lipids into Millipore filter paper, which improved the taste sensing efficiency of membrane remarkably. We have made an attempt to prepare taste sensor material by grafting polyacrylic acid (PAA) to cellulose. The research work covers polymer membrane preparation, morphology study, and structural characterization of the membrane and study of the taste sensing characteristics of this membrane for five different taste substances. FTIR spectroscopic analysis and SEM were done to get an idea about the structure and morphology of the PAA grafted cellulose membrane. Surface charge density of the membrane was estimated. The sensor characteristics like temporal stability, response stability, response to different taste substances, and reproducibility of sensing performance were studied using PAA grafted cellulose membrane. Sensor device prepared with this membrane has shown distinct response patterns for different taste substances in terms of membrane potential. Threshold concentrations of PAA grafted cellulose membrane for HCl, NaCl, quinine-hydrochloride (Q-HCl), sucrose and monosodium glutamate are 0.001 mM, 0.01 mM, 0.08 mM, 0.08 mM and 0.01 mM, respectively. The threshold concentrations except that in Q-HCl are below human threshold concentrations. Membranes also showed characteristic response patterns for organic acids like acetic acid, citric acid, formic acid, etc., mineral acids like HCl, H₂SO₄ and HNO₃, etc., salts, bitter substances, sweet substances and umami substances. Sensor device prepared with this membrane has excellent shelf life.