Closed-form solution for two collinear mode-III cracks in an orthotropic elastic strip of finite width

The problem of an orthotropic strip containing two collinear cracks normal to the strip boundaries is considered. The Fourier series method is used to reduce the associated boundary value problem to triple series equations, then to a singular integral equation, which can be solved analytically. Under remote uniform antiplane shear loading, the stress field and the crack sliding displacement are determined analytically and stress intensity factors are also given in a closed form.     

The dynamic behavior of two collinear interface cracks in magneto-electro-elastic materials

In this paper, the dynamic behavior of two collinear symmetric interface cracks between two dissimilar magneto-electro-elastic material half planes under the harmonic anti-plane shear waves loading is investigated by Schmidt method. By using the Fourier transform, the problem can be solved with a set of triple integral equations in which the unknown variable is the jump of the displacements across the crack surfaces. To solve the triple integral equations, the jump of the displacements across the crack surface is expanded in a series of Jacobi polynomials. Numerical solutions of the stress intensity factor, the electric displacement intensity factor and the magnetic flux intensity factor are given. The relations among the electric filed, the magnetic flux field and the stress field are obtained.     

Stress intensity factors for anisotropic layered composites: Part II—isolated double periodic cracks

The formulation in Part I (Theoret. Appl. Fracture Mech. 17, 205–219 (1992)) of this work for collinear cracks in alternate layers of an anisotropic laminate is extended to a system where each of the cracked layer contains a periodic array of parallel cracks. These cracks are also collinear such that they are periodic in two mutually perpendicular directions. Finite Fourier transform is applied at discrete points for one of the space variables reducing the problem to a singular integral equation. The unknown is expressible in terms of the crack opening displacement as in Part I. Displayed graphically are the normalized stress intensity factor, effective stiffness of the laminate, and the interlayer stresses. The local stress intensity factor for the double array crack system is always less than that for a single isolated crack depending on the periodicity ratio. The interlayer stresses directly ahead of the crack are elevated, the intensity of which increases with decreasing distance between the crack tip and interface. Increase in the thickness of the adjoining layer tends to decrease the interlayer stresses nearest to the crack tip, a result that is to be expected.     

两种各向异性材料界面共线裂纹的反平面问题

本文研究两种各向异性材料界面共线裂纹的反平面剪切问题。利用复变函数方法，提出了一般问题公式和某些实际重要问题的封闭形式解。考察了裂纹尖端附近的应力分布并给出了应力强度因子公式。从本文解签的特殊情形，可以直接导出两种各向同性材料界面裂纹，均匀各向异性材料共线裂纹以及均匀各向同性材料共线裂纹的相应问题公式，其中包括已有的经典结果。     

A novel method for residual strength prediction for sheets with multiple site damage: Methodology and experimental validation

A unified method for solving the strip yield model for collinear cracks in finite and infinite sheet is proposed. The method is based on the weight function of a single crack. Two collinear cracks in finite and infinite sheets are used to apply and verify this method. The plastic zone size, crack opening displacement and stress distribution along the ligament between cracks obtained by using the present method are extensively compared with existing available results and finite element solutions, and very good agreements are observed. Combined with the Crack Tip Opening Angle (CTOA) criterion, the unified method is used to predict the crack growth behavior and residual strength for 2024-T3 aluminum alloy sheet with Multiple Site Damage (MSD). Thirty-two sheets with four types of MSD are designed and tested to verify this method. It is shown that the present method is able to predict various crack growth behaviors observed in experiment. The predicted residual strengths are within 9% of the corresponding test results. Compared to the elastic–plastic finite element method, the present method is much more efficient.     

Generalized 2D problem of piezoelectric media containing collinear cracks

The generalized 2D problem in piezoelectric media with collinear cracks is addressed based on Stroh's formulation and the exact electric boundary conditions on the crack faces. Exact solutions are obtained, respectively, for two special cases: one is that a piezoelectric solid withN collinear cracks is subjected to uniform loads at infinity, and the other is that a piezoelectric solid containing a single crack is subjected to a line load at an arbitrary point. It is shown when uniform loads are applied at infinity or on the crack faces that, the stress intensity factors are the same as those of isotropic materials, while the intensity factor of electric displacement is dependent on the material constants and the applied mechanical loads, but not on the applied electric loads. Moreover, it is found that the electric field inside any crack is not equal to zero, which is related to the material properties and applied mechanical-electric loads. The project supported by the National Natural Science Foundation of China (19772004)     

Dynamic behavior of two collinear interface cracks between two dissimilar functionally graded piezoelectric/piezomagnetic material strips

The dynamic interaction of two collinear interface cracks between two dissimilar functionally graded piezoelectric/piezomagnetic material strips subjected to the anti-plane shear harmonic stress waves was investigated. By using the Fourier transform, the problem can be solved with the help of a pair of triple integral equations in which the unknown variable is jump of displacement across the crack surfaces. These equations are solved using the Schmidt method. Numerical examples are provided to show the effect of the functionally graded parameter, the circular frequency of the incident waves and the thickness of the strip upon stress, electric displacement and magnetic flux intensity factors of cracks.     

On the dynamic behaviour of a piezoelectric laminate with multiple interfacial collinear cracks

This paper investigates the dynamic behaviour of a piezoelectric laminate containing multiple interfacial collinear cracks subjected to steady-state electro-mechanical loads. Both the permeable and impermeable boundary conditions are examined and discussed. Based on the use of integral transform techniques, the problem is reduced to a set of singular integral equations, which can be solved using Chebyshev polynomial expansions. Numerical results are provided to show the effect of the geometry of interacting collinear cracks, the applied electric fields, the electric boundary conditions along the crack faces and the loading frequency on the resulting dynamic stress intensity and electric displacement intensity factors.     

Dynamic stress intensity factors of two collinear cracks in orthotropic medium subjected to time-harmonic disturbance

Dynamic stresses are obtained for an infinite orthotropic medium weakened by two collinear cracks. Time-harmonic elastic waves are interrupted at normal incidence by the line cracks. Fourier transform is applied reducing the problem to solving a pair of dual integral equations. Solution method involves expanding the crack surface displacement in a series of functions that vanish along a collinear line outside the cracks. The unknown coefficients in the series are evaluated by using the Schmidt method. Dynamic stress intensity factors are computed and displayed graphically for an orthotropic medium that corresponds to the elastic properties of boron-epoxy composite.     

层状磁电复合材料界面共线裂纹平面问题分析

本文研究了面内电磁势载荷作用下双层压电压磁复合材料中共线界面裂纹问题．考虑了压电材料的导磁性质和压磁材料的介电性质,引入了界面电位移和磁感强度的连续性条件．利用Fourier 变换得到一组第二类Cauchy 型奇异积分方程．进一步导出了相应问题的应力强度因子、电位移强度因子和磁感强度强度因子的表达式,给出了应力强度因子的数值结果．结果表明电磁载荷会导致界面裂纹尖端I、II 混合型应力奇异性,同时还伴随着电位移和磁感强度的奇异性．比较了双裂纹左右端的应力强度因子,发现在面内极化方向上施加面内磁势载荷时共线裂纹内侧尖端区域的两个法向应力场发生互相干涉增强．     

Transient response of a magnetoelectroelastic solid with two collinear dielectric cracks under impacts

Dynamic analysis of two collinear electro-magnetically dielectric cracks in a piezoelectromagnetic material is made under in-plane magneto-electro-mechanical impacts. Generalized semi-permeable crack-face boundary conditions are proposed to simulate realistic opening cracks with dielectric. Ideal boundary conditions of a combination of electrically permeable or impermeable and magnetically permeable or impermeable assumptions are several limiting cases of the semi-permeable dielectric crack. Utilizing the Laplace and Fourier transforms, the mixed initial-boundary-value problem is reduced to solving singular integral equations with Cauchy kernel. Dynamic intensity factors of stress, electric displacement, magnetic induction and crack opening displacement (COD) near the inner and outer crack tips are determined in the Laplace transform domain. Numerical results for a special magnetoelectroelastic solid are calculated to show the influences of the dielectric permittivity and magnetic permeability inside the cracks on the crack-face electric displacement and magnetic induction. By means of a numerical inversion of the Laplace transform, the variations of the normalized intensity factors of stress and COD are discussed against applied magnetoelectric impact loadings and the geometry of the cracks for fully impermeable, vacuum, fully permeable cracks and shown in graphics.     

双周期裂纹压电材料反平面剪切问题断裂力学分析

研究压电材料双周期裂纹反平面剪切与平面电场作用的问题．运用复变函数方法，获得了该问题严格的闭合解，并由此给出了裂纹尖端应力强度因子和电位移强度因子的精确公式．数值算例显示了裂纹分布特征对材料断裂行为的重要影响．叠间小裂纹能够对主裂纹的应力和电位移场起着屏蔽作用，相反行间小裂纹却起着放大作用，至于钻石形分布裂纹的影响规律则更为复杂．对于某些特殊情形给予了解答并导出一系列有意义的结果。     

Multi-interface cracks in a piezoelectric layer bonded to two half-piezoelectric spaces under anti-plane shear loading

The behavior of four parallel symmetry permeable interface cracks in a piezoelectric layer bonded to two half-piezoelectric spaces under anti-plane shear loading is investigated. By using the Fourier transform, the problem can be solved with the help of two pairs of triple integral equations. These equations are solved by the Schmidt method. This process is quite different from that papers adopted previously. The normalized stress and electrical displacement intensity factors are determined for different geometric and property parameters for permeable crack surface conditions. Numerical examples are provided to show the effect of the geometry of the interacting cracks, the thickness and the materials constants of the piezoelectric layer upon the stress and electric displacement intensity factors of the cracks. It is found that the electric displacement intensity factors for the permeable crack surface conditions are much smaller than the results for the impermeable crack surface conditions.     

Basic solution of two parallel non-symmetric permeable cracks in piezoelectric materials

The behavior of two parallel non-symmetric cracks in piezoelectric materials subjected to the anti-plane shear loading was studied by the Schmidt method for the permeable crack electric boundary conditions. Through the Fourier transform, the present problem can be solved with two pairs of dual integral equations ip which the unknown variables are the jumps of displacements across crack surfaces. To solve the dual integral equations, the jumps of displacements across crack surfaces were directly expanded in a series of Jacobi polynomials. Finally, the relations between electric displacement intensity factors and stress intensity factors at crack tips can be obtained. Numerical examples are provided to show the effect of the distance between two cracks upon stress and electric displacement intensity factors at crack tips. Contrary to the impermeable crack surface condition solution, it is found that electric displacement intensity factors for the permeable crack surface conditions are much smaller than those for the impermeable crack surface conditions. At the same time, it can be found that the crack shielding effect is also present in the piezoelectric materials.     

DYNAMIC BEHAVIOR OF TWO COLLINEAR PERMEABLE CRACKS IN A PIEZOELECTRIC LAYER BONDED TO TWO HALF SPACES

IntroductionIn the fracture mechanics studies for piezoelectric materials,differently electricboundary conditions at the crack surfaces have been proposed by many researchers.Forexample,for the sake of analytical simplification,the assumption that the cra…     

Analysis of Two Collinear Cracks in a Piezoelectric Layer Bonded to Two Half Spaces Subjected to Anti-plane Shear

In this paper, the behavior of two collinear anti-plane shear cracks in a piezoelectric layer bonded to two half spaces is investigated by a new method for the impermeable crack face conditions. The cracks are parallel to the interfaces in the mid-plane of the piezoelectric layer. By using the Fourier transform, the problem can be solved with two pairs of triple integral equations. These equations are solved using the Schmidt method. This process is quite different from that adopted previously. Numerical examples are provided to show the effect of the geometry of the interacting cracks and the piezoelectric constants of the material upon the stress intensity factor of the cracks.     

Isolated crack in three-dimensional piezoelectric solid. Part II: Stress intensity factors for circular crack

This is part II of the work concerned with finding the stress intensity factors for a circular crack in a solid with piezoelectric behavior. The method of solution involves reducing the problem to a system of hypersingular integral equations by application of the unit concentrated displacement discontinuity and the unit concentrated electric potential discontinuity derived in part I [1]. The near crack border elastic displacement, electric potential, stress and electric displacement are obtained. Stress and electric displacement intensity factors can be expressed in terms of the displacement and the potential discontinuity on the crack surface. Analogy is established between the boundary integral equations for arbitrary shaped cracks in a piezoelectric and elastic medium such that once the stress intensity factors in the piezoelectric medium can be determined directly from that of the elastic medium. Results for the penny-shaped crack are obtained as an example.     

Interaction between collinear periodic cracks in an infinite piezoelectric body

The problem of collinear periodic cracks in an infinite piezoelectric body is studied. Effect of saturation strips at the crack-tips is taken into account. By means of the Stroh formalism and the conformal mapping technique, the general periodic solutions for collinear cracks are obtained. The stress intensity factors and the size of saturation strips are derived analytically, and their dependencies on the ratio of the periodicity on the half-length of the crack are analyzed in detail. Numerical results show the following two facts. (1) When h/l>4.0, the stress intensity factors become almost identical to those of a single crack in an infinite piezoelectric body. This indicates that the interaction between cracks can be ignored in establishing the criterion for the crack initiation in this case. (2) The speed of the saturation strip size of periodic cracks approaching that of a single crack depends on the electric load applied at infinity. In general, a large electric load at infinity is associated with a slow approaching speed.     

Closed form solution for two unequal collinear semi-permeable straight cracks in a piezoelectric media

The problem of two unequal collinear straight cracks weakening a poled transversely isotropic piezoelectric ceramic is addressed under semi-permeable electric boundary conditions on the crack faces. The plate has been subjected to combined in-plane normal(to the faces of the cracks) mechanical and electric loads. Problem is formulated employing Stroh formalism and solved using complex variable technique. The elastic field, electric field and energy release rate are obtained in closed analytic form. A case study is presented for poled PZT-5H cracked plate to study the effect of prescribed mechanical load, electric load, inter-crack distance and crack lengths on crack arrest parameters stress intensity factor (SIF), electric displacement intensity factor (EDIF) and mechanical and total energy release rates (ERR). Moreover a comparative study is done of impermeable and semi-permeable crack face boundary conditions on SIF, EDIF and ERR, and results obtained is presented graphically. It is observed that the effect of dielectric medium in the crack gap cannot be ignored.     

Electrothermal stress in conductive body with collinear cracks

The temperature and stress field in a thin plate with collinear cracks interrupting an electric current field are determined. This is accomplished by using a complex function method that allows a direct means of finding the distribution of the electric current, the temperature and stress field. Temperature dependency for the heat-transfer coefficient, coefficient of linear expansion and the elastic modulus are considered. As an example, temperature distribution is calculated for an alloy (No. GH2132) plate with two collinear cracks under high temperature. Relationships between the stress, temperature, electric density and crack length are obtained. Crack trajectories emanating from existing crack are predicted by application of the strain energy density criterion which can also be used for finding the load carrying capacity of the cracked plate.