SYNTHESIS AND PROPERTIES OF METAL COMPLEXES OF β-DIKETONE BASED SIDE CHAIN LIQUID CRYSTAL POLYSILOXANE

A new type of metal coordinated liquid crystalline polymers has been synthesized by complexation of metal ions with β-diketone based side chain liquid crystal polysiloxane (DKLCP). The complexation of copper ions with DKLCP greatly increases the phase transition temperature T_k from crystalline state to liquid crystalline state and T_(cl) from LC to isotropic state and makes the range of phase transition ΔT (ΔT=T_(cl)-T_k) widened. These complexes are soluble in common organic solvents. However, the incorporation of europium ions into DKLCP molecules gives rise to reduction in liquid crystallinity and crosslinking in some cases. The DKLCP coordinated with suitable amount of Eu ions can show good liquid crystallinity and fluorescent property.     

SYNTHESIS AND MESOGENIC PROPERTY OF Pd-COORDINATING AZO-TYPE SIDE CHAIN LIQUID CRYSTALLINE POLYSILOXANE

A novel palladium-coordinating Azo-type liquid crystalline polysiloxane (Pd-AZLCP) has been synthesized by chelation reaction of polymeric ligand, Azo-type liquid crystalline polysiloxane(AZLCP), with palladium dichloride and potassium chloride in the presence of tetrahydrofuran (THF) as reaction medium instead of dioxane/water system, which has been used since Cope first reported the synthesis of palladium-azobenzene in 1965 . The mesogenic behaviors examined by DSC, temperature-variable X-ray diffraction and polarizing microscopy indicate that the incorporation of Pd ions into the liquid crystal polymer can play a positive effect on the mesogenic property of the parent polymeric ligand. It is exhibited that the isotropization temperature T_i is increased and the mesophase range ΔT has been widened, too.     

SYNTHESIS AND MESOMORPHIC PROPERTIES OF FISHBONE-LIKE LIQUID CRYSTALLINE POLYSILSESQUIOXANES——Ⅰ. FISHBONE-LIKE, β-DIKETONE-BASED LIQUID CRYSTALLINE POLYSILSESQUIOXANES AND THEIR COPPER COMPLEXES*

Two kinds of fishbone-like, β-diketone-based liquid crystalline polysilsesquioxanes(FBDKLCP'S), homopolymeric (H-FBDKLCP) and copolymeric (C-FBDKaLCP) have been first synthesized via the hydrosilylation reaction of a vinyl-terminated β-diketone with the homopolymeric ladderlike polyhydrosilsesquioxane (LPHSQ) and random copolymethylhydrosilsesquioxane (LRPMHSQ) respectively. These new kinds of FBDKLCP with M of 10~4 is thermotroic liquid crystalline polymer and its clearing temperatures T_i's and mesophase range △T's are much higher than those of the corresponding comb-like β-diketone liquid crystalline polysiloxane (DKLCP) by about 200℃. Similar results have been observed with the comparison of the two different structure Cu-coordinating compounds The significant increases in T_((?))'s and △T's of the FBDKLCP and Cu-FBDKLCP are mainly attributed to the great rigidity of the ladderlike polysilsesquioxane backbone.     

SYNTHESIS AND CHARACTERIZATION OF β-DIKETONE BASED SIDE CHAIN LIQUID CRYSTALLINE POLYSILOXANES

A new type of β-diketone based side chain liquid crystalline polysiloxanes (DKLCP) with different length of flexible spacers and end groups have been synthesized by hydrosilation reaction. This is liquid crystal polymers (LCP) using coordinating β-diketone ligand as mesogens. The phase behaviour of DKLCP polymers was studied by differential scanning calorimetry and polarizing microscopy. X-ray diffraction investigations demonstrated that the polysiloxanes with sufficiently long flexible spacers were smectic liquid crystal polymers, while those with much shorter spacers were nematic ones.     

SYNTHESIS AND CHARACTERIZATION OF PALLADIUM COORDINATING IMINE SIDE CHAIN LIQUID CRYSTALLINE POLYSILOXANES

New thermotropic chloro-bridged dinuclear palladium coordinating imine side chain liquid crystalline polysiloxanes have been synthesized. Their mesomorphic properties have been investigated by DSC, X-ray diffraction and polarizing microscopy. The polymeric complexes show nematicdiscotic (Nd) mesophase. It is found that the temperature range of liquid crystalline state of chloro- bridged polymeric complexes is much wider than that of acetato- bridged ones and imine side chain polysiloxane. This indicates that the disc-like chloro-bridged palladium complexing units play a role as mesogen in mesophase.     

A NOVEL TITANIUM COMPLEX WITH LINKED β-DIKETONATO-INDENYL LIGAND FOR CATALYTIC SYNDIOSPECIFIC POLYMERIZATION OF STYRENE

A novel ligand (3), in which the indenyl group is linked to a β-diketone moiety through a three-carbon bridge, andits titanium complex (4) were synthesized. The titanium complex was employed as a metallocene analog with co-catalystmethylaluminoxane (MAO) in catalytic syndiospecific polymerization of styrene to give highly syndiotactic polystyrene(s-PS, 96%-97%). Polymerization temperature (T_p) strongly influenced the catalytic activity and syndiotacticity of theproduced PS. The activities of catalyst 4 increase from 1.84×10~6 to 3.26×10~6 gPS/molTi·h with the increase of T_p from60℃ to 80℃ and the syndiotacticities of the produced s-PS also increase slightly. Then, both the catalytic activity and thesyndiotacticity of PS decrease at T_p of 90℃.     

STATISTICS OF A NOVEL CLASS OF LIQUID CRYSTAL POLYMERS

A novel class of the liquid crystal polymers with mesogens laterally attached to flexible main chain backbones has been synthesized recently by us. While the flexible backbones tend to take configuration of maximum entropy the mesogenic side groups tend to orientate because of the anisotropie soft dispersion forces. A mean field theory is presented to describe the competition between these two trends which makes it possible for this class of polymers to show anisotropic (liquid crystal) phase within certain temperature range where the polymer main chains and the side chain mesogens will take approximately parallel arrangement, which is different from the normal side chain liquid crystal polymers. The temperature range of the liquid crystal phase, its ordering and phase transition all depend on the flexibility of the backbone, the strengthof the anisotropic forces of the side groups and the hinge elasticity. The results show that the liquid crystalisotropic phase transition is of the first order. The phase diagram, i. e. the dependence of the transition temperature on the structure of the polymers is also given.     

TIME RESOLVED SPECTRA OF Eu(MBA)_3 PHEN COMPLEXES

Time-resolved fluorescence spectra of europium methylbenzoates(MBA)with 1,10-phenanthroline(phen)have been measured at room temperature.Foreach of the europium chelates,where the ligand triple states lie above the ~5D_1 level ofEu~(3-),the spectra providc evidence that the Eu~(3-) ~5D_0 state is populated by nonradiativeenergy transfer from the higher-lying ~5D_1,state.The relaxation time for energy decayfrom ~5D_1 state is measured in the microcrystals to bc of the order of a fewmicroseconds.It is suggested that the ligand C=0 and C=C stretching vibrations andEu-O vibrations,chclate ring and benzene ring vibrations make importantcontributions to the relaxation process.The ~5D\-1—~5D\-0 relaxation time of Eu-(p-MBA)_3phen is shorter than those of Eu(m-MBA)_3phen and Eu(o-MBA)_3phensince nonradiative degradation to ~5D_0 from ~5D_1 appears to be more strongly influencedby the E_u~(3+)sites in the former.     

Temperature-dependent β-Crystal Growth in Isotactic Polypropylene with β-Nucleating Agent after Shear Flow

In our current work, the effect of the shear temperature on the growth of β-crystal in isotactic polypropylene(iPP) with β-nucleating agent is investigated by means of in situ two-dimensional wide-angle X-ray diffraction(2 D-WAXD). At low shear temperatures, the formed shear-induced oriented precursors are hard to relax back to random coiled state due to the weak mobility of molecular chains. Therefore, plenty of oriented α-crystals are induced by shear-induced oriented precursors, while β-crystal is greatly depressed. As the shear temperature increases, oriented β-crystal gradually increases along with the decrease of α-crystal. It is deduced that the shear temperature at which the content of β-crystal increases to the(maximum) value found in quiescent crystallization is almost the same as that at which the accelerating effect of flow on crystallization kinetics is completely erased. Our work manifests its significance in regulating β-crystal and thus in the structure and property manipulation of i PP.     

SYNTHESIS OF SIDE-CHAIN LIQUID CRYSTALLINE POLYSILOXANE CONTAINING SCHIFF′S BASE MESOGENS WITH NO2-END GROUP AND ITS BEHAVIOR IN A DC ELECTRIC FIELD

A side chain liquid crystalline copolysiloxane, which would show electro-optic effects as known from low mass liquid crystal, was synthesized by hydrosilylation reaction, and the two homologous monomers with different length spacers containing Schiff's base mesogen with—NO_2 terminated group were grafted toa polysiloxane main chain. Residual monomer in crude product is effective in reinforcing the response to an electric field over that of pure polymeric liquid crystal.     

Phase Behavior of Liquid Crystals Formed in [C12mim]CI/H2O and [C12mim] Cl/Alcohols Systems

Phase behaviors of different binary systems involving 1-dodecyl-3-methylimidazolium chlo- ride （[C12mim]Cl） and H20, [C12mim]Cl and different alcohols （1-butanol, 1-pentanol, 1- hexanol and 1-octanol） are investigated at 25 ℃. Hexagonal liquid crystal phase （H1） is identified in [C12mim]Cl/H2O system, and lamellar liquid-crystalline （Lα） phase is found in [C12mim]Cl/alcohols systems by using polarized optical microscopy and small-angle X-ray scattering techniques. The formation of such phases is considered as a synergetic result of the solvatophobic force and the hydrogen-bonded network comprising an imidazoliuin ring, chloride ion and water （or alcohols）, which can be confirmed by Fourier transform infrared spectra. It is noticeable that in [C12mim]Cl/1-octanol system, the lattice spacings of lamellar phase increase with increasing C12mimCl concentration, which is opposite to the results of [C12mim]Cl/H2O system. This may result mainly from stronger static repulsion among hydrophilic headgroups of imidazolium salts arranged in the bilayers of lamellar structures. Further measurements by differential scanning calorimetry indicate that the lamellar phase is stable within a wide temperature range above room temperature. However, the lattice spacings decrease with the increase of temperature, which may. be due to the softening of the hydrocarbon chain of [C12mim]Cl molecules. In different alcohols systems, it is found that the lamellar lyotropic liquid crystal structure is easier to be formed when the carbon chain length becomes longer.     

CARBON-13 NMR STUDY ON MOLECULAR MOTION OF 1, 2-POLYBUTADIENE——TEMPERATURE DEPENDENCE OF MOLECULAR MOTION

Proton-decoupled, ~(13)C FT-NMR (operating at 50.3 MHz) is used to determine spin-latticerelaxation time (T_1), nuclear Overhauser enhancement (NOE), linewidth and chemical shift of 1,2-polybutadiene as a function of temperature in CDCl_3 solution and the temperature dependence ofmolecular motion of 1,2-polybutadiene has been investigated with these NMR relaxation parameters.It is found that jumps of NOE and linewidth vs. temperature appear between-1℃and -30℃. Theminimum of nT_1 vs. temperature for all carbons occur at about -45℃.     

SYNTHESIS AND CHARACTERIZATION OF LIQUID CRYSTAL POLYESTERS WITH T-SHAPED TWO-DIMENSIONAL MESOGENIC UNITS(Ⅲ)*

A new series of liquid crystal polyesters with T-shaped two-dimensional mesogenic units weresynthesized by melt polycondensation of the diacetates of 2-(4'-alkoxy -phenyl)-hydroquinones with 4,4'-alkylenedioxydibenzoic acid. The polymers were characterized by using polarized microscopy, DSC and X-ray diffraction. It was realized that all the polymers have nematic thermotropic liquid crystallinecharacteristics. The melting temperature (T_m) and isotropization temperature (T_i) of the polymers changeregularly with varying lengths of the alkoxy side group and the length of the alkylene group in the main chainin company with an even-odd effect. The mesophase temperature range also varies regularly with the polymerstructure. It is shown that the mesophase range has been widened.     

Synthesis and polarized photoluminescence of novel phosphorescent cyclometalated platinum dimer

A novel phosphorescent cyclometalated platinum dimer with bis-[2-(p-dodecyloxyphenyl) pyridyll-hexane-1,6-diol as ligand and 1,3-(1-n-hexyl,3-n-heptadecyl)diketone as ancillary ligand was synthesized.The chemical structure and liquid crystal property of the dimer were characterized by ~1H NMR,ESl-MS,polarizing optical microscopy(POM) and differential scanning calorimetry (DSC).The aligned film of title compound on the rubbed polyimide film is intensely emissive at room temperature with emission maximum at 516nm.The luminescence dichroic ratio((?) ) at 516 nm is 3.1.     

SIMULTANEOUS SAXS／WAXS／DSC STUDIES ON MICROSTRUCTURE OF CONVENTIONAL AND METALLOCENE-BASED ETHYLENE-BUTENE COPOLYMERS

The fractions of one metallocene-based (mPE) and one conventional (znPE) ethylene-butene copolymer eluted at 80-82℃ from temperature rising elution fractionation were selected for DSC and time-resolved small angle X-ray scattering (SAXS) and wide angle X-ray scattering (WAXS) characterization. The DSC and WAXS results show that two crystal structures exist in both mPE and znPE: structure A with higher melting temperature and structure B with lower melting temperature. It was found that original znPE (s-znPE) contains more highly ordered structure A than original mPE (s-mPE) in spite of the higher comonomer content of znPE. Another structure C is also identified because of higher crystallinity measured by WAXS than by DSC and is attributed to the interfacial region. The SAXS data were analyzed with correlation function and two maxima were observed in s-mPE and s-znPE, in agreement with the conclusion of two crystal populations drawn from DSC and WAXS results. These two crystal populatiorts have close long periods in s-mPE, but very different long periods in s-znPE. In contrast, freshly crystallized mPE and znPE (f-mPE and f-znPE) contain only a single crystal population with a broader distribution of long period     

MULTIPLE MELTING BEHAVIOR OF β-CRYSTALLINE PHASE POLYPROPYLENE

Differential scanning calorimetry and X-ray diffraction experiments on β-nucleated polypropylene were made on the samples crystallized at different temperatures and processed by injection molding. The crystal perfection was shown to vary with crystallization temperature. The observed multiple peaks could be related to a ill-phase with defective inclination of the chains, a recrystallized or original β_2-phase of more perfect inclination, and the α-phase. Injection molded samples could be analyzed from the established DSC interpretation.     

CRYSTALLIZATION AND MELTING OF NYLON 610

Differential scanning calorimetry was used to study the crystallization andmelting of nylon 610. For nylon 610 crystallized from the melt state (260℃), the overall rateof bulk crystallization can be described by a simple Avrami equation with Avrami exponentn ≈ 2, independent of crystallization temperature. With the experimentally obtainedT_m~0 (235℃ ～ 255℃) of nylon 610, the fold surface free energy σ_e was determined to be35 ～38 erg/cm~2. The effects of annealing temperature and time on the melting of quenchednylon 610 were also investigated. For nylon 610 quenched at room temperature there isonly one DSC endotherm peak DSC scans on annealed samples exhibited an endothermpeak at approximately 10℃ above the annealing temperature. The size and position of theendothermic peak is strongly related to annealing temperature and time. An additionalthird melting was observed when quenched nylon 610 was annealed at high temperaturefor a sufficiently long residence time. The existence of the third melting peak suggests thatmore than one kind of distribution of lamella thickness may occur when quenched nylon610 is annealed. The implications of these results in terms of crystal thickening mechanismwere discussed.     

Osmium Complexes Useful in the Preparation of Metal Thin Film and Highly Efficient Electroluminescent Devices

Treatment of β-diketone ligand, such as hfacH (hexafluoroacetylacetone), with Os3(CO)12 in a stainless steel autoclave at elevated temperature afforded the corresponding mononuclear osmium complex [Os(CO)3(hfac)(tfa)] (1) in good yield. This complex is highly volatile and displays moderate stability at the higher temperatures; thus, it can be utilized for depositing metal thin-film material with overall quality comparable or better than those deposited using the commercially available chemi…     

Investigation on the gelation behavior of biodegradable poly(butylene succinate) during isothermal crystallization process

The early stage of polymer crystallization may be viewed as physical gelation process,i.e.,the phase transition of polymer from liquid to solid.Determination of the gel point is of significance in polymer processing.In this work,the gelation behavior of poly(butylene succinate)(PBS) at different temperatures has been investigated by rheological method.It was found that during the isothermal crystallization process of PBS,both the storage modulus(G′) and the loss modulus(G″) increase with time,and the rheological response of the system varies from viscous-dominated(G′G″),meaning the phase transition from liquid to solid.The physical gel point was determined by the intersection point of loss tangent curves measured under different frequencies.The gel time(t_c) for PBS was found to increase with increasing crystallization temperature.The relative crystallinity of PBS at the gel point is very low(2.5%-8.5%) and increases with increasing the crystallization temperature.The low crystallinity of PBS at the gel point suggests that only a few junctions are necessary to form a spanning network,indicating that the network is"loosely"connected,in another word,the critical gel is soft.Due to the elevated crystallinity at gel point under higher crystallization temperature,the gel strength S_g increases, while the relaxation exponent n decreases with increasing the crystallization temperature.These experimental results suggest that rheological method is an effective tool for verifying the gel point of biodegradable semi-crystalline polymers.     

THE EFFECT OF HOT DRAWN ON THE PHYSICAL AGING OF ATACTIC POLYSTYRENE

The physical aging behavior of atactic polystyrene (aPS) films achievedunder different drawing conditions has been studied by optical birefringence and modulatedifferential scanning calorimeter (m.d.s.c.). The results show that on annealing at specifictemperature below glass transition temperatue (T_g), the enthalpy relaxation (△H) and T_gdecrease with increasing of birefringence (△n). On the other hand, the effect of moleculardraw ratio (MDR) is confusing: △H and T_g decrease with increasing of MDR in the earlystage of aging, but the MDR's effect become unobvious with the development of aging.It may be concluded that the ordered domain generated by the drawing below or aboveglass transition temperature will affect the development of physical aging behavior. Theviewpoint of cohesional entanglement is used to account for the above observations.