Micellar Effect on the Reaction of Chromium(VI) Oxidation of L‐Sorbose in the Presence and Absence of Picolinic Acid in Aqueous Acid Media: A Kinetic Study

The kinetics and mechanism of chromic acid oxidation of L‐sorbose in the presence and absence of picolinic acid (PA) have been studied under the conditions, [L‐sorbose]_T » [PA]_T » [Cr(VI)]_T, at different temperatures. In the absence of PA, the monomeric chromic acid undergoes esterification with the substrate followed by the acid catalysed redox decomposition of the Cr(VI)‐substrate ester through glycol splitting to formaldehyde and the lactone of C₅‐aldonic acid and Cr(IV) which subsequently participates in the faster reactions. In the presence of PA, the Cr(VI)‐PA complex produced in a pre‐equilibrium step experiences a nucleophilic attack by the substrate to produce a ternary complex which decomposes through glycol splitting giving rise to the organic products and Cr(IV)‐PA complex. Both the uncatalysed and PA‐catalysed paths show the first‐order dependence on [L‐sorbose]_T and [Cr(VI)]_T. The PA‐catalysed path is first‐order in [PA]_T and it shows a fractional order in [H⁺]. The uncatalysed path shows a second‐order dependence on [H⁺]. In the presence of the surfactants like N‐cetylpyridinium chloride (CPC, a cationic surfactant) and sodium dodecyl sulfate (SDS, an anionic sulfate), the reaction orders remain unchanged. CPC has been found to inhibit both the uncatalysed and PA‐catalysed paths while SDS shows the rate accelerating effect for both the uncatalysed and PA‐catalysed paths. The observed micellar effects have been rationalised by considering the distribution of the reactants between the micellar and aqueous phases in terms of the proposed reaction mechanism.     

Self-Foaming Metal-Organic Gels Based on Phytic Acid and Their Mechanical,Moldable, and Load-Bearing Properties.

A catalogue of metal-organic gels are synthesized from phytic acid (PA) and a diversity of metal ions (Fe³⁺, Cr³⁺, Al³⁺, Ce³⁺, Y³⁺, Co²⁺, Ni²⁺, Mn²⁺, Cu²⁺, Zn²⁺, Mg²⁺) upon heating at 80 °C. PA−M gels have various morphologies, including irregular granular (PA−Fe, PA−Al, PA−Ce, PA−Cr, PA−Ni, PA−Co), spongy (PA−Y), and hollow tremella-like (PA−Cu) morphologies. Interestingly for PA−Fe-1 : 4 (PA:Fe³⁺=1 : 4) a large amount of gas is generated during the gelation process leading to a self-foaming gel. The PA−Fe-1 : 4 self-foaming gel shows reversible gel-sol phase transition. The gel is unusually weakened and transformed into a sol at room temperature, and the sol is reversed to gelation when heated again at 80 °C. PA−Fe-1 : 4 gel also shows shapeable and load-bearing properties, and it can bear up to 200 times of its weight, depending on the gas amount fixed in the foam gel and the aging time. This work provides a catalogue of self-foaming supramolecular gels with tunable properties based on naturally abundant resources.     

The synthesis of poly(phenylacetylene)s with bulky chiral silyl groups and the thermal stability of their helical conformation

The polymerization of (−)‐p‐[(tert‐butylmethylphenyl)silyl]phenylacetylene (t‐BuMePhSi*PA) and (+)‐p‐[{methyl(α‐naphthyl)phenyl}silyl]phenylacetylene (MeNpPhSi*PA) with the [(nbd)RhCl]₂ Et₃N catalyst yielded polymers with very high molecular weights over 2 × 10⁶ in high yields. The optical rotations of the formed poly(t‐BuMePhSi*PA) and poly(MeNpPhSi*PA) were as high as −356 and −150° (c = 0.11 g/dL in CHCl₃), respectively. The circular dichroism (CD) spectrum of poly(t‐BuMePhSi*PA) in CHCl₃ exhibited very large molar ellipticities ([θ]) in the UV region: [θ]_max = 9.2 × 10⁴ ° · cm² · dmol⁻¹ at 330 nm and −8.0 × 10⁴ ° · cm² · dmol⁻¹ at 370 nm. The [θ]_max values of poly(MeNpPhSi*PA) were also fairly large: [θ]_max = 7.1 × 10⁴ ° · cm² · dmol⁻¹ at 330 nm and −5.3 × 10⁴ ° · cm² · dmol⁻¹ at 370 nm. The optical rotations of poly(t‐BuMePhSi*PA) and poly(MeNpPhSi*PA), measured in tetrahydrofuran, chloroform, and toluene solutions, were hardly dependent on temperature in the range 22–65 °C. The CD effects of these polymers hardly changed in the temperature range 28–80 °C, either. These results indicate that the helical structures of these polymers are thermally appreciably stable. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 71–77, 2001     

Micellar effect on the reaction of picolinic acid catalyzed chromium(VI) oxidation of dimethyl sulfoxide in aqueous acidic media: A kinetic study

The kinetics and mechanism of picolinic acid (PA) catalyzed oxidation of dimethyl sulfoxide (DMSO) to dimethyl sulfone by chromium(VI) in both aqueous H₂SO₄ and HClO₄ media have been studied in the absence and presence of surfactants at different temperatures. Cr(VI)–PA complex formed in preequilibrium steps is the active oxidant that experiences the nucleophilic attack by DMSO to form a positively charged intermediate ternary complex. Within the proposed ternary complex, an oxygen transfer or a ligand coupling or both occurs to generate the product, dimethyl sulfone. Cr(VI) is ultimately converted to Cr(III)–PA complex. Under the experimental conditions, the process shows a first‐order dependence on each of the reactants (i.e., [Cr(VI)]_T, [PA]_T, [DMSO]_T, and [H⁺]). HCrO₄⁻ has been found kinetically active. The reaction is catalyzed by sodium dodecyl sulfate (SDS, a representative anionic surfactant) monotonically, while cetylpyridinium chloride (CPC, a representative cationic surfactant) retards the reaction continuously. The observed micellar effects have been explained by considering the hydrophobic and electrostatic interaction between the surfactants and reactants. A pseudo‐phase ion exchange (PIE) model has been applied to explain the micellar effect. The Piszkiewicz cooperative model has been applied to determine the kinetic parameters, and it indicates the existence of catalytically productive submicellar aggregates. Because of this reactant‐promoted micellization of the surfactant before or below the cmc value, the present systems do not show any discontinuity at the respective reported cmc values of the surfactants. © 2001 John Wiley & Sons, Inc. Int J Chem Kinet 33: 173–181, 2001     

A New Hydroxo‐bridged Chromium(III) Dimer [Cr(saltn)OH]2·4H2O: Synthesis,Crystal Structure and Magnetic Properties

A new hydroxo‐bridged dimeric Cr(III) complex [Cr(saltn)OH]₂·4H₂O [H₂saltn=N,N′‐bis(salicylidene)trimethylenediamine] has been synthesized and its structural and magnetic properties have been investigated. The complex crystallizes in the triclinic space group P‐1 with one dimeric formula unit in a cell of dimensions a=0.95828(19) nm, b=0.95926(19) nm, c=1.0437(2) nm, α=86.77(3)°, β=82.48(3)°, and γ=64.93(3)°. The geometry around each chromium(III) center is six‐coordinate, distorted‐octahedral. The bridging Cr₂O₂ unit is strictly planar, as required by the crystallographic symmetry. The Cr? O? Cr′ bridging angle is 99.94(16)°, and the distance between Cr…Cr′ is 0.3019 nm. The magnetic susceptibility of the complex has been examined in the range of 2‐300 K. By using the spin‐spin coupled model for an S₁=S₂=3/2 dimeric system , the magnetic data were fitted to give the parameters of g=2.01(1), J=‐0.85(2) cm^‐1, and zJ' =0.18(3)cm^‐1, indicating the presence of a weak antiferromagnetic spin‐exchange interaction between the Cr(III) ions in the binuclear complex.     

Nitrene Insertion into CC and CH Bonds of Diamide Diimine Ligands Ligated to Chromium and Iron

The impact of redox non‐innocence (RNI) on chemical reactivity is a forefront theme in coordination chemistry. A diamide diimine ligand, [{‐CH?N(1,2‐C₆H₄)NH(2,6‐iPr₂C₆H₃)}₂]ⁿ (n=0 to ?4), (dadi)ⁿ, chelates Cr and Fe to give [(dadi)M] ([ 1 Cr(thf)] and [ 1 Fe]). Calculations show [ 1 Cr(thf)] (and [ 1 Cr]) to have a d⁴ Cr configuration antiferromagnetically coupled to (dadi)^2?*, and [ 1 Fe] to be S=2. Treatment with RN₃ provides products where RN is formally inserted into the C? C bond of the diimine or into a C? H bond of the diimine. Calculations on the process support a mechanism in which a transient imide (imidyl) aziridinates the diimine, which subsequently ring opens.     

Monomere und dimere Chrom(III)-Phthalocyanine: Synthese und Eigenschaften von Hydroxopyridinophthalocyaninatochrom(III) und μ-Oxodi(pyridinophthalocyaninatochrom(III))

Monomeric and Dimeric Chromium(III) Phthalocyanines: Synthesis and Properties of Hydroxopyridinophthalocyaninatochromium(III) and μ-Oxodi(pyridinophthalocyaninatochromium(III)) Heating of ?[Cr(OH)Pc^2?]”? in pyridine (Py) gives the paramagnetic (T = 273 K) complexes [Cr(OH)(Py)Pc^2?] (μ_Cr = 3.84 μ_B) and [(Cr(Py)Pc^2?)₂O] (μ_Cr = 1.24 μ_B) by consecutive substitution and condensation reactions. The UV-VIS spectra are characterized by the typical B, Q, and N regions of the Pc^2? ligand being shifted hypsochromically for the dimer with respect to the monomer due to excitonic coupling (1.5 kK). Regions of weak absorbance between 8 and 13 resp. 19 kK are assigned to trip-quartet transitions for both complexes. A weak band at 870 cm^?1 in the FIR/MIR spectra is assigned to v_as(Cr? O? Cr). In the resonance Raman(RR) spectra v(Cr? O) at 514 cm^?1 resp. v_s(Cr? O? Cr) at 426 cm^?1 is selectively enhanced. Further strong RR-lines of the μ-Oxo dimer at 110 and 631 cm^?1 are assigned to a (Py? Cr? O)- resp. internal pyridine deformation of a_1g symmetry. An assignment as 2v_as(Cr? O? Cr) is proposed for the remarkable RR line at 1740 cm^?1.     

Ligand exchange reactions of some Cr(III) complexes investigated by cyclic voltammetry

From cyclic linear sweep voltammograms of some Cr(III) complexes it is evident that after electron transfer ligand groups are expelled relatively slowly inDMSO and the tetra coordinated complex is formed. The rate constants could be determined in some cases by the methods of cyclic voltammetry. The following compounds were examined: [Cr(en)₃]³⁺, [Cr(acac)(en)₂]²⁺, [Cr(acac)₃]. [Cr(dien)₂]³⁺, [Cr(DMSO)₆]³⁺, [Cr(ur)₆]³⁺. For [Cr(en)₃]³⁺ the energy of activation could be determined as well.The dependence of the velocity of ligand elimination on complex structure is discussed.

---

Untersuchung von Ligandenaustauschreaktionen einiger Cr(III)-Komplexe mittels cyclischer Voltammetrie

Zusammenfassung Bei der Reduktion einiger der folgenden Cr(III)-Komplexe inDMSO läßt sich auf Grund der Voltammogramme auf eine Ligandenabspaltung und Bildung der vierfach koordinierten Cr(II)-Komplexe schließen: [Cr(en)₃]³⁺, [Cr(acac)(en)₂]²⁺, [Cr(acac)₃], [Cr(dien)₂]³⁺, [Cr(DMSO)₆]³⁺, [Cr(ur)₆]³⁺. Für das [Cr(en)₃]³⁺ konnten Geschwindigkeitskonstante und Aktivierungsenergie dieser nachgelagerten Reaktion bestimmt werden.Der Einfluß der Struktur des Komplexes auf die Zerfallsgeschwindigkeit wird diskutiert.

     

Nitrene Insertion into C?C and C?H Bonds of Diamide Diimine Ligands Ligated to Chromium and Iron

The impact of redox non‐innocence (RNI) on chemical reactivity is a forefront theme in coordination chemistry. A diamide diimine ligand, [{‐CHN(1,2‐C₆H₄)NH(2,6‐iPr₂C₆H₃)}₂]ⁿ (n=0 to −4), (dadi)ⁿ, chelates Cr and Fe to give [(dadi)M] ([ 1 Cr(thf)] and [ 1 Fe]). Calculations show [ 1 Cr(thf)] (and [ 1 Cr]) to have a d⁴ Cr configuration antiferromagnetically coupled to (dadi)²⁻*, and [ 1 Fe] to be S=2. Treatment with RN₃ provides products where RN is formally inserted into the C C bond of the diimine or into a C H bond of the diimine. Calculations on the process support a mechanism in which a transient imide (imidyl) aziridinates the diimine, which subsequently ring opens.     

Chromium Complexes Supported by Phenyl Ether-Pyrazolyl [N,O] Ligands as Catalysts for the Oligo- and Polymerization of Ethylene

A new series of Cr (III) complexes [Cr{1-(3-phenoxypropyl)-1H-pyrazole}Cl₃]₂ (Cr1), [Cr{1-(3-phenoxypropyl)-3,5-dimethyl-1H-pyrazole}Cl₃]₂ (Cr2 ), and [Cr{1-(3-phenoxypropyl)-3-phenyl-1H-pyrazole}Cl₃]₂ (Cr3) have been synthesized and characterized by elemental analysis, high-resolution mass spectrometry (HRMS) and IR spectroscopy. Upon activation with methylaluminoxane (MAO), chromium precatalysts Cr2 and Cr3 showed moderate activity in ethylene oligomerization [TOF = 17,900–29,200 mol (ethylene)·mol (Cr)⁻¹·h⁻¹ at 80 °C] with Schultz-Flory distribution of oligomers (K = 0.54–0.66) and production of polymer varying from 2.8 to 6.7 wt.%. On the other hand, under identical oligomerization conditions, Cr1 /MAO behaved as a polymerization catalyst generating predominantly polyethylene (63.7 wt%). The amount of 1-butene is the largest component in the liquid fraction suggesting that these precatalysts operate via a Cossee-Arlman mechanism. The catalytic activities, selectivity and product distribution are quite sensitive to the R-group at the 3- and 5-position of the pyrazolyl ring. Based on the electronic and steric effects of R- substituents, it is possible to stablish a trend of activity: Cr2 (Pz^Me2) > Cr3 (Pz^Ph) > Cr1 (Pz). Moreover, the effect of oligomerization parameters (cocatalyst, temperature, [Al]/[Cr] molar ratio, time) on the activity and on the product distribution were examined.     

New homoleptic metal complexes of Schiff bases derived from 2,4-di-p-tolyl-3-azabicyclo[3.3.1]nonan-9-one

New bidentate Schiff-base ligands 2-(2,4-di-p-tolyl-3-azabicyclo[3.3.1]nonan-9-ylidene)hydrazinecarbothioamide HL¹ and 2-(2,4-di-p-tolyl-3-azabicyclo[3.3.1]nonan-9-ylidene)hydrazinecarboxamide HL² were synthesized from the condensation of 2,4-di-p-tolyl-3-azabicyclo[3.3.1]nonan-9-one with thiosemicarbazide and semicarbazide, respectively. Homoleptic complexes of these ligands, of general formula K[Cr(L ⁿ )₂Cl₂], K₂[Mn(L ⁿ )₂Cl₂], K₂[Fe(L¹)₂Cl₂] and [M(L ⁿ )₂] (where M = Co(II), Ni(II) Cu(II), Zn(II), Cd(II), and Hg(II) ions; n = 1 or 2) are reported. The mode of bonding and overall geometry of the complexes were determined through IR, UV-Vis, NMR and mass spectral studies, magnetic moment measurements, elemental analysis, metal content, and conductance. These studies revealed octahedral geometry for Cr(III), Mn(II), and Fe(II) complexes, square planar for Cu(II), Co(II), and Ni(II) complexes and tetrahedral for Zn(II), Cd(II), and Hg(II) complexes.     

Cr(III), Fe(III), and Co(II) complexes of tetraazamacrocycles derived from 2,3-butanedione or benzil and 1,8-diamino-3,6-diazaoctane

Summary Template condensation of -diketones such as 2,3-butanedione or benzil with 1,8-diamino-3,6-diazaoctane in the presence of Cr(III), Fe(III) and Co(II) results in the formation of macrocyclic complexes of the type [MLX₂]X and [CoLX]X (where M=Cr(III), Fe(III), L=N₄ macrocycle and X=NO ₃ ^– or Cl^–). The complexes have been characterized by elemental analyses, conductance and magnetic measurements, molecular weight determinations, infrared and diffuse reflectance spectral studies.

---

Cr(III)-, Fe(III)- und Co(II)-Komplexe mit Tetraazamacrocyclen aus 2,3-Butandion oder Benzil und 1,8-Diamino-3,6-diazaoctan

Zusammenfassung Kondensation von -Diketonenen wie 2,3-Butandion oder Benzil mit 1,8-Diamino-3,6-diazaoctan in Gegenwart von Cr(III), Fe(III) und Co(II) resultiert in der Bildung von macrocyclischen Komplexen vom Typ [MLX₂]X und [CoLX]X mit M=Cr(III), Fe(III), L=N₄-Macrocyclus und X=NO ₃ ^– oder Cl^–. Die Komplexe wurden mittels Elementaranalyse, Leitfähigkeits-und magnetischen Messungen, Molekulargewichtsbestimmung und Infrarot- bzw. diffuser Reflexions-Spektren charakterisiert.

     

Biphasic oxidation of diaquadichloro(1,10-phenanthroline)chromium(III) by N-bromosuccinimide and the formation of chromium(IV) and chromium(V)

The kinetics of oxidation of diaquadichloro(1,10-phenanthroline)chromium(III) complex, [Cr^III(phen)(H₂O)₂Cl₂]⁺, by N-bromosuccinimide (NBS) is biphasic. The first faster step involves the oxidation of Cr(III) to Cr(IV). The second slower step is due to the oxidation of Cr(IV) to Cr(V). The reaction product is isolated and characterized by electron spin resonance (ESR), IR, and elemental analysis. The chromium(V) product is consistent with the formula [Cr^V(phen)Cl₂(O)]Br. The rate constants k_f and k_s, for the faster and the slower steps respectively, were obtained using an Origin 9.0 software program. Values of both k_f and k_s, varied linearly with [NBS] at constant reaction conditions. The effect of pH on the reaction rate is investigated over the pH (4.11–6.01) range at 25.0°C. The rate constants k_f and k_s increased with increasing pH. This is consistent with hydroxo forms of the chromium species being more reactive than the aqua forms. Chromium(III) complexes, more often than not, are inert. The oxidation of the Cr(III) complex to Cr(IV), most likely, proceeds by an outer sphere mechanism. Since chromium(IV) is labile the mechanism of its oxidation to chromium(V) is not certain.     

A kinetic study of the complex formation between aquachromium(III) ions and L-iso-leucine

Summary The kinetics of complex formation between aquachromium(III) ions and L-iso-leucine have been studied spectrophotometrically. Effects of varying the total chromium(III), total amino acid and H⁺ concentrations, ionic-strength, temperature and % EtOH on the k_ohs were determined. The results are best accounted for by outer-sphere complexation equilibria involving HL (the amino acid zwitterion) and [Cr(H₂O)₆]³⁺/[Cr(H₂O)₅OH]²⁺ which precede anations. A rate-equation is established which involves K_os1, K_os2, k₁, k₂ (the respective outer-sphere complexation and interchange rate constants with [Cr(H₂O)₆]³⁺ and [Cr(H₂O)₅OH]²⁺), K_a and K_h (the acid-dissociation constants of H₂L⁺HL and [Cr(H₂O)₆]³⁺ [Cr(H₂O)₅OH]²⁺ pairs). The proposed mechanism is I_a for the path involving hexaaqua- and I_d for that involving hydroxopentaaquachromium(III).     

Metallosurfactants of Chromium(III) Coordination Complexes. Synthesis, Characterization and Determination of CMC Values

A number of mixed ligand chromium(III)–surfactant coordination complexes, of the type cis-[Cr(en)₂(A)X]²⁺ and cis-α-[Cr(trien)(A)X]²⁺ (A = Dodecyl or Cetylamine; X = F⁻, Cl⁻, Br⁻) were synthesized from the corresponding dihalogeno complexes by ligand substitution. These compounds form foam in aqueous solution when shaken. The critical micelle concentration (CMC) values of these surfactant metal complexes in aqueous solution were obtained from conductance measurements. Specific conductivity data (at 303, 308 and 313 K) served for evaluation of the temperature-dependent critical micelle concentration (cmc) and the thermodynamics of micellization (Δ G_m⁰, Δ H_m⁰ and Δ S_m⁰).     

Kinetics of anation of chromium(III) by L-phenylalanine

Summary The kinetics of anation of chromium(III) species, [Cr(H₂O)₆]⁴⁺ and [Cr(H₂O)₅OH]²⁺, by L-phenylalanine in aqueous acid has been studied spectrophotometrically. Effects of varying [substrate], [ligand], [H⁺], , % ethanol and temperature were investigated. The kinetic data suggest a mechanism where outersphere-associations [between chromium(III) species and phenylalanine in the zwitterionic form] precede anation. Comparison of the results with published data suggest an I_a path for the [Cr(H₂O)₆]³⁺ reaction and I_d path for the [Cr(H₂O)₅OH]²⁺ reaction.     

Dioxygen binding and activation by a highly reactive Cr(II) compound containing S,N-donors derived from o-aminothiophenol

We report the synthesis, characterization, and reactivity of a Cr(II) complex, [Cr(H₂O)(L^ISQ)₂] (1) [(L^ISQ)^1? is o-iminothionebenzosemiquinonate(1?) π-radical], that is highly stable in solid state in the presence of air but undergoes spontaneous change in solution, both in the presence and absence of air. Physicochemical studies in solution show that a superoxo-Cr^III species, [Cr(O₂)(OH)(L^ISQ)₂]^? is generated initially in DMF solution of 1 in the presence of air owing to its immediate deprotonation followed by O₂ binding to the deprotonated species. The formation of this superoxo-Cr^III species is prominent and gradual in the presence of CH₃OH, a scavenger of CrO²⁺ species. This Cr(O₂)²⁺ species in turn is converted to another highly reactive O=Cr(IV) intermediate [O=Cr(OH)(L^ISQ)₂]^? which undergoes disproportionation producing an unstable O=Cr(V) species, [O=Cr(OH)(L^ISQ)₂] and a stable Cr(III) compound, [Cr(OH)(DMF)(L^ISQ)₂] (2). The rate of this disproportionation is enhanced in the presence of MnCl₂, [N(n-Bu)₄]PF₆ and KSCN. The generated O=Cr(IV) species interacts with DNA with complete cleavage. The O=Cr(V) species slowly disappears from solution as revealed from EPR studies.     

Photosubstitution in some cyanide complexes of chromium(III)(1)

Photosubstitution by OH^? ligand was concluded from a photochemical study of the [Cr(CN)₆]^3? and [Cr(CN)₅OH]^3? complexes in alkaline medium. Photoaccelerated aquation was found to proceed in the case of aquocyanochromates(III): [Cr(CN)₅H₂O]^2? and [Cr(CN)₃(H₂O)₃].     

Photochemical reactions of <Emphasis Type="Italic">cis</Emphasis>-[(η<Superscript>4</Superscript>-NBD)M(CO)<Subscript>4</Subscript>] (NBD = norbornadiene; M = Cr,Mo) olefin complex with ligand,containing S and N donor atoms

New complexes cis-[M(CO)₄-DABRd] (M = Cr(I), Mo(II) and fac-[M(CO)₃-SAT] (M = Cr(III), Mo(IV)) have been synthesized by the photochemical reactions of cis-[(η⁴-NBD)M(CO)₄] (NBD is norbornadiene; M=Cr, Mo) with 5-(4-dimethylaminobenzylidene) rhodanine (DABRd) and salicylidene-3-amino-1,2,4-triazole (SAT) ligands and characterized by elemental analysis, FT-IR and ¹H NMR spectroscopy, and mass spectrometry. The spectroscopic studies show that the DABRd ligand acts as a bidentate ligand coordinating via both NH-(S)C=S sulfur donor atoms in I and II and SAT ligand behaves as a tridentate ligand coordinating via its all imine nitrogen-C=N-donor atoms in III and IV to the metal center. The article was submitted by the authors in English.     

Kinetics and mechanism of oxidation of the binary and ternary complexes of chromium(III) involving inosine and glycine by N -bromosuccinimide

The kinetics of oxidation of the chromium(III) complexes, [Cr(Ino)(H₂O)₅]³⁺ and [Cr(Ino)(Gly)(H₂O)₃]²⁺ (Ino?=?Inosine and Gly?=?Glycine) involving a ligands of biological significance by N-bromosuccinimide (NBS) in aqueous solution to chromium(VI) have been studied spectrophotometrically over the 25–45°C range. The reaction is first order with respect to both [NBS] and [Cr], and increases with pH over the 6.64–7.73 range in both cases. The experimental rate law is consistent with a mechanism in which the hydroxy complexes [Cr(Ino)(H₂O)₄(OH)]²⁺ and [Cr(Ino)(Gly)(H₂O)₂(OH)]⁺ are significantly more reactive than their conjugate acids. The value of the intramolecular electron transfer rate constant, k ₁, for the oxidation of the [Cr(Ino)(H₂O)₅]³⁺ (6.90?×?10^?4?s^?1) is lower than the value of k ₂ (9.66?×?10^?2?s^?1) for the oxidation of [Cr(Ino)(Gly)(H₂O)₂]²⁺ at 35°C and I?=?0.2?mol?dm^?3. The activation parameters have been calculated. Electron transfer apparently takes place via an inner-sphere mechanism.