Effect of Methyl,Hydroxyl, and Chloro Substituents in Position 3 of 3′,4′,7‐Trihydroxyflavylium: Stability,Kinetics, and Thermodynamics

The effect of methyl, hydroxyl, and chloride substituents in position 3 of the 3′,4′,7‐trihydroxyflavylium core structure was studied. The stability, relative energy of each of chemical species (thermodynamics), and their rates of interconversion (kinetics) are very dependent on these substituents. By comparing the mole fraction distribution at equilibrium of the three multistate systems with the parent 3′,4′,7‐trihydroxyflavylium, introduction of a methyl substituent in position 3 increases the mole fraction of hemiketal at the expense of the trans‐chalcone and increases the hydration rate very significantly; a hydroxyl substituent in position 3 gives rise to a degradation process, as observed in anthocyanidins. In the case of 3‐chloro‐3′,4′,7‐trihydroxyflavylium, a dramatic increase of the flavylium cation acidity was observed and a photochromic system can be operated upon irradiation of the respective trans‐chalcone in 1 m HCl. According to the photochromic response of 3,3′,4′,7‐tetrahydroxyflavylium and 3′,4′,7‐trihydroxyflavylium, some requirements for a good photochromic performance are discussed.     

Supramolecular Organization of Dye Molecules in Zeolite L Channels: Synthesis,Properties, and Composite Materials

Sequential insertion of different dyes into the 1D channels of zeolite L (ZL) leads to supramolecular sandwich structures and allows the formation of sophisticated antenna composites for light harvesting, transport, and trapping. The synthesis and properties of dye molecules, host materials, composites, and composites embedded in polymer matrices, including two‐ and three‐color antenna systems, are described. Perylene diimide (PDI) dyes are an important class of chromophores and are of great interest for the synthesis of artificial antenna systems. They are especially well suited to advancing our understanding of the structure–transport relationship in ZL because their core fits tightly through the 12‐ring channel opening. The substituents at both ends of the PDIs can be varied to a large extent without influencing their electronic absorption and fluorescence spectra. The intercalation/insertion of 17 PDIs, 2 terrylenes, and 1 quaterrylene into ZL are compared and their interactions with the inner surface of the ZL nanochannels discussed. ZL crystals of about 500 nm in size have been used because they meet the criteria that must be respected for the preparation of antenna composites for light harvesting, transport, and trapping. The photostability of dyes is considerably improved by inserting them into the ZL channels because the guests are protected by being confined. Plugging the channel entrances, so that the guests cannot escape into the environment is a prerequisite for achieving long‐term stability of composites embedded in an organic matrix. Successful methods to achieve this goal are described. Finally, the embedding of dye–ZL composites in polymer matrices, while maintaining optical transparency, is reported. These results facilitate the rational design of advanced dye–zeolite composite materials and provide powerful tools for further developing and understanding artificial antenna systems, which are among the most fascinating subjects of current photochemistry and photophysics.     

Interplay of Hole Transfer and Host–Guest Interaction in a Molecular Dyad and Triad: Ensemble and Single‐Molecule Spectroscopy and Sensing Applications

A new molecular dyad consisting of a Cy5 chromophore and ferrocene (Fc) and a triad consisting of Cy5, Fc, and β‐cyclodextrin (CD) are synthesized and their photophysical properties investigated at both the ensemble and single‐molecule levels. Hole transfer efficiency from Cy5 to Fc in the dyad is reduced upon addition of CD. This is due to an increase in the Cy5‐Fc separation (r) when the Fc is encapsulated in the macrocyclic host. On the other hand, the triad adopts either a Fc‐CD inclusion complex conformation in which hole transfer quenching of the Cy5 by Fc is minimal or a quasi‐static conformation with short r and rapid charge transfer. Single‐molecule fluorescence measurements reveal that r is lengthened when the triad molecules are deposited on a glass substrate. By combining intramolecular charge transfer and competitive supramolecular interaction, the triad acts as an efficient chemical sensor to detect different bioactive analytes such as amantadine hydrochloride and sodium lithocholate in aqueous solution and synthetic urine.     

Molecular Engineering of Pyrido[3,4‐b]pyrazine‐Based Donor–Acceptor–π‐Acceptor Organic Sensitizers: Effect of Auxiliary Acceptor in Cobalt‐ and Iodine‐Based Electrolytes

Due to the ease of tuning its redox potential, the cobalt‐based redox couple has been extensively applied for highly efficient dye‐sensitized solar cells (DSSCs) with extraordinarily high photovoltages. However, a cobalt electrolyte needs particular structural changes in the organic dye components to obtain such high photovoltages. To achieve high device performance, specific requirements in the molecular tailoring of organic sensitizers still need to be met. Besides the need for large electron donors, studies of the auxiliary acceptor segment of donor–acceptor–π‐acceptor (D‐A‐π‐A) organic sensitizers are still rare in molecular optimization in the context of cobalt electrolytes. In this work, two novel organic D‐A‐π‐A‐type sensitizers ( IQ13 and IQ17 ) have been developed and exploited in cobalt‐ and iodine‐based redox electrolyte DSSCs, specifically to provide insight into the effect of π‐bridge modification in different electrolytes. The investigation has been focused on the additional electron‐withdrawing acceptor capability with grafted long alkoxy chains. Optoelectronic transient measurements have indicated that IQ17 containing a pyrido[3,4‐b]pyrazine moiety bearing long alkoxyphenyl chains is more suitable for application in cobalt‐based DSSCs.     

A Geomimetic Approach to the Formation and Identification of Fossil Sterane Biomarkers in Crude Oil: 18‐nor‐D‐homo‐Androstane and 5α,14β‐Androstane

A diazonium ion derived from 18‐aminoandrostane rearranged upon decomposition by a carbonium and a carbenium ion to furnish a mixture of a cyclopropanated compound and two D ‐homo‐androstenes. Hydrogenation of this mixture gave the saturated hydrocarbons, 18‐nor‐D ‐homo‐androstane and 5α,14β‐androstane, which are both fossil sterane biomarkers in Neoproterozoic crude oil. The so far unknown constitution and configuration as well as the geochemical genesis were established by this experiment. The starting material for this investigation, 18‐aminoandrostane, was prepared in twelve steps from androstan‐17‐one (12.5 % overall yield) with a Barton reaction as the key step.     

Dried blood spot on‐card derivatization: an alternative form of sample handling to overcome the instability of thiorphan in biological matrix

Thiorphan, the active metabolite of racecadotril, can undergo oxidation in biological matrices such as blood and plasma. In bioanalysis, a general approach for the stabilization of such a molecule is to derivatize the thiol group to a more stable thioether, often requiring complex handling procedures at the clinical site. In this research, the concept of dried blood spot (DBS) on‐card derivatization was evaluated to stabilize thiorphan. DBS cards were in‐house pre‐treated with 2‐bromo‐3′‐methoxyacetophenone and left to dry prior to blood spotting. Thiorphan was shown to be effectively derivatized to thiorphan–methoxyacetophenone once applied on the in‐house pre‐treated cards. Thiorphan–methoxyacetophenone was extracted by soaking a 6 mm DBS punch in methanol containing the internal standard (thiorphan–methoxyacetophenone‐D₅). Chromatographic separation was achieved on a Waters XBridge C₁₈ column with a gradient elution of 5 m m NH₄HCO₃ and methanol in 2.5 min and detection by ESI(+)/MS/MS. A linear (weighted 1/x²) relationship was obtained over a concentration range of 5.00–600.00 ng/mL. The assay met regulatory guidelines acceptance criteria for sensitivity, selectivity, precision and accuracy, matrix effect, recovery, dilution integrity and multiple stability evaluations. The DBS on‐card derivatization has shown to be an easy and reliable alternative form of sample collection for the quantification of thiorphan. Copyright © 2012 John Wiley & Sons, Ltd.     

Quantitative analysis of enasidenib in dried blood spots of mouse blood using an increased‐sensitivity LC–MS/MS method: Application to a pharmacokinetic study

A simple, sensitive and rapid assay method has been developed and validated as per regulatory guidelines for the estimation of enasidenib on mouse dried blood spots (DBS) using liquid chromatography coupled to tandem mass spectrometry with electrospray ionization in the positive‐ion mode. The method employs liquid extraction of enasidenib from DBS disks of mouse whole blood followed by chromatographic separation using 0.2% formic acid–acetonitrile (25:75, v/v) at a flow rate of 1.0 mL/min on an Atlantis dC₁₈ column with a total run time of 2.0 min. The MS/MS ion transitions monitored were m/z 474.0 → 267.1 for enasidenib and m/z 309.2 → 251.3 for the internal standard (warfarin). The assay was linear in the range of 1.01 – 3044 ng/mL. The within‐run and between‐run precisions were in the range of 3.18 – 9.06 and 4.66 – 8.69%, respectively. Stability studies showed that enasidenib was stable on DBS cards for 1 month. This novel method has been applied to analyze the DBS samples of enasidenib obtained from a pharmacokinetic study in mice.     

Development of an LC‐MS/MS method for determination of bicalutamide on dried blood spots: application to pharmacokinetic study in mice

A rapid and highly sensitive assay method has been developed and validated for the estimation of bicalutamide (BCL) on mouse dried blood spots (DBS) using liquid chromatography coupled to tandem mass spectrometry with electrospray ionization in the negative‐ion mode. The assay procedure involves a simple liquid extraction of BCL and tolbutamide (internal standard, IS) from mouse blood DBS cards using tert‐butyl methyl ether. Chromatographic separation was achieved with 5 mm ammonium acetate (pH 6.5)–acetonitrile (35:65, v/v) at a flow rate of 0.60 mL/min on an Atlantis dC₁₈ column with a total run time 3.0 min. The MS/MS ion transitions monitored were 428.80 → 254.70 for BCL and 269.00 → 169.60 for IS. Method validation was performed as per regulatory guidelines. A linear response function was observed from 0.92 to 1911 ng/mL for BCL in mouse blood. The intra‐ and inter‐day precisions were in the ranges of 1.86–12.5 and 3.19–10.8%, respectively. This novel DBS method has been applied to a pharmacokinetic study in mice. Copyright © 2014 John Wiley & Sons, Ltd.     

To be or not to be butterfly: New mechanistic insights in the Aza‐Michael asymmetric addition of lithium (R)‐N‐benzyl‐N‐(α‐methylbenzyl)amide

The asymmetric Aza‐Michael addition of homochiral lithium benzylamides to α,β‐unsaturated esters represents an extended protocol to obtain enantioenriched β‐amino esters. An exhaustive mechanistic revision of the originally proposed mechanism is reported, developing a quantum mechanics/molecular mechanics protocol for the asymmetric Aza‐Michael reaction of homochiral lithium benzylamides. Explicit and implicit solvent schemes were considered, together with a proper account of long‐range dispersion forces, evaluated through a density functional theory benchmark of different functionals. Theoretical results showed that the diastereoselectivity is mainly controlled by the N‐α‐methylbenzyl moiety placing, deriving a Si/Re 99:1 diastereoselective ratio, in good agreement with reported experimental results. The main transition state geometries are two transition state conformers in a “V‐stacked” orientation of the amide's phenyl rings, differing in the tetrahydrofuran molecule arrangement coordinated to the metal center. Extensive conformational sampling and quantum‐level refinement give reasonable good speed/accuracy results, allowing this protocol to be extended to other similar Aza‐Michael reaction systems. © 2014 Wiley Periodicals, Inc.