Synthesis, characterization, physical properties, and applications of highly fluorescent pyrene-functionalized 9,9-bis(4-diarylaminophenyl)fluorene in organic light-emitting diodes

A new, highly fluorescent pyrene-functionalized 9,9-bis(4-diarylaminophenyl)fluorene, namely PTF, was synthesized and characterized. This material is an amorphous molecular glass with notably high T_g, is electrochemically stable, and exhibits strong blue emission both in solution and solid state. It shows promising ability as a solution processed blue emitter and hole-transporter for OLEDs. High-efficiency sky-blue and Alq3-based green devices with luminance efficiencies of 1.13 and 4.08 cd/A are achieved, respectively.     

Color tuning of iridium complexes for organic light-emitting diodes: The electronegative effect and π-conjugation effect

Novel red phosphorescent emitter bis(4-phenylquinazolinato-N,C^2′) iridium(acetylacetonate) [(pqz)₂Ir(acac)], bis(1-(1′-naphthyl)-5-methylisoquinolinato-N,C^2′)iridium(acetylacetonate) [(1-mniq)₂Ir(acac)] and bis(1-(2′-naphthyl)-5-methylisoquinolinato-N,C^2′)iridium(acetylacetonate) [(2-mniq)₂Ir(acac)] have been synthesized and fully characterized. The electronegative effect of (pqz)₂Ir(acac) ligand shows almost the same influence as the extended π-conjugation effect of (2-mniq)₂Ir(acac). Density functional theory (DFT) was applied to calculate the Kohn-Sham orbitals of HOMOs and LUMOs in the iridium complexes to illustrate the N(1) electronegative atom effect. Finally, lowest triplet state (T₁) energies calculated by time-dependent DFT (TDDFT) were compared with the experimental electroluminescent data. The calculated data for the iridium complexes agreed fairly well with experimental data. Electroluminescent devices with a configuration of ITO/NPB/CBP:dopant/BCP/AlQ₃/LiF/Al were fabricated. The device using (pqz)₂Ir(acac) as a dopant showed deep-red emission with 1931 CIE (Commission International de L’Eclairage) chromaticity coordinates x = 0.70, y = 0.30.     

白光有机发光二极管的最新进展

有机发光二极管(Organic Light-Emitting Diodes,OLEDs)以其制备工艺简单、成本低、发光颜色可在可见光区内任意调节以及易于大面积制作和柔韧弯曲等优点,被认为是未来重要的显示技术之一,在未来照明光源领域也显示了诱人的应用前景.一般认为,如果OLED的发光效率超过100 lm/W,就有可能取代一般照明.本文综述了实现白光OLED的方法及其最新进展,并对白光OLED存在的问题及其发展趋势进行了讨论.     

New applications of poly(arylene ether)s in organic light-emitting diodes

Compared with conventional π-conjugated polymers,poly(arylene ether)s(PAEs) may take advantages of excellent thermal properties,well-defined effective conjugated length and no catalyst contamination.Recently,their applications have been extended from engineering plastics to optoelectronic materials.In this review,various kinds of functional PAEs used as fluorescent polymers,host polymers and phosphorescent polymers in organic light-emitting diodes(OLEDs) are outlined,and their molecular design,synthesis and device performance are overviewed.     

Novel iridium complexes as high-efficiency yellow and red phosphorescent light emitters for organic light-emitting diodes

A series of novel biscyclometallated iridium complexes based on spirobifluorene ligands and acetyl acetonate (acac) ancillary ligands have been synthesized and characterized. Their electrochemical properties were investigated by cyclic voltammetry (CV). HOMO, LUMO, and energy band gaps of all the complexes were calculated by the combination of UV-vis absorption spectra and CV results. TGA and DSC results indicated their excellent thermal stability and amorphous structure. All the iridium complexes were fabricated into organic light-emitting devices with the device configuration of ITO/PEDOT:PSS (50 nm)/PVK (50 wt %):PBD (40 wt %):Ir complex (10 wt %) (45 nm)/TPBI (40 nm)/LiF (0.5 nm)/Ca (20 nm)/Ag (150 nm). Yellow to red light emission has been achieved from the iridium complexes guest materials. Complex C1 (yellow light emission) achieved an efficiency of 36.4 cd/A (10.1%) at 198 cd/m² and complex C4 (red light emission) reached external quantum efficiency of 4.6%. The slight decrease of external quantum efficiency at high current density revealed that the triplet-triplet (T₁-T₁) annihilation was effectively suppressed by the new developed complexes.     

Alkoxy encapsulation of carbazole-based thermally activated delayed fluorescent dendrimers for highly efficient solution-processed organic light-emitting diodes

Two n-butoxy-encapsulated dendritic thermally activated delayed fluorescent(TADF) emitters(namely O-D1 and O-D2) with the first-/second-generation carbazoledendrons are designed and synthesized via C—N coupling between carbazoledendrons and 2,4,6-tris(4-bromophenyl)-1,3,5-triazine core.It is found that,compa red with the commo nly-used tert-butyl groups,the use of n-butoxy encapsulation groups can lead to smallersinglet-triplet energy gap for the dendrimers,producing stronger TADF effect together with faster reverse intersystem crossing process.Solution-processed TADF organic light-emitting diodes(OLEDs) utilizingalkoxy-encapsulated dendrimers O-D1 and O-D2 as emitters exhibitstate-of-the-art device efficiency withthe maximum external quantum efficiency up to 16.8% and 20.6%,respectively,which are ～1.6 and～2.0 times that of the tert-butyl-encapsulated counterparts.These results suggest that alkoxy encapsulation of the carbazole-based TADF dendrimers can be a promising approach for developing highly efficient emitters for solution-processed OLEDs.     

Corannulene derivatives for organic electronics: From molecular engineering to applications

This paper intends to provide an overview for using corannulene derivatives in organic electronics such as organic field-effect transistors (OFETs), organic solar cells (OSCs), and organic light-emitting diodes (OLEDs). We highlight the rational design strategies, tuning molecular orbital energy levels and arrangement in single crystals of corannulenes. The topological structure and properties of corannulene make it a unique candidate for organic electronics.     

溶液加工型有机电致发光材料与器件研究进展

有机电致发光器件（OLEDs）在平板显示和固体照明领域有着广阔的应用前景,发展十分迅速,已实现了商业化．而可溶液加工的OLEDs采用喷墨打印、卷对卷印刷等低成本方式进行加工,在实现低成本、大面积显示及照明器件等方面具有巨大的应用潜力,引起了广泛关注．实现高效溶液加工型OLEDs的实用性需要在光电材料设计合成及器件制备方法上进一步深入研究．本文总结了发光材料与器件国家重点实验室可溶液加工型OLEDs材料及器件的研究进展．     

Efficient deep-red organic light-emitting diodes based on blending MEH-PPV with a small molecule compound

Efficient deep-red organic light-emitting diodes(OLEDs) were investigated based on the blend of poly[2- methoxy-5-(2’-ethyl-hexyloxy)-l,4-phenylene vinylene](MEH-PPV) with 4,7-bis(5-(7-(9H-carbazol-9-yl)-9,9-dioctyl-9H-fluoren -2-yl)thiophen-2-yl)benzo[c][1,2,5]thiadiazole(compound 1).By optimizing the blend ratio,the turn-on voltage of the devices was significantly reduced from 4.9 V to 2.4 V.A highest external quantum efficiency of 2.56%was achieved at a blend ratio of 95:5(wt) for compound 1:MEH-PPV.The CIE coordinate was measured to be(0.70,0.30),with the luminescence peak at around 680 nm.Based on experimental observations the improvement mechanism is described.     

Stable deep blue organic light emitting diodes with CIE of y < 0.10 based on quinazoline and carbazole units

Achieving stable deep blue organic light emitting diodes (OLEDs) with narrow full width at half maximum (FWHM) and color gamut in the range of the commission International de L’Eclairage (CIE) of y ≤ 0.10 is still challenging in display and lighting applications. In this investigation, three donor-acceptor (D-A) deep-blue emitters were designed and synthesized via integrating asymmetric quinazoline (PQ) acceptor with weak donating carbazole (Cz) donor. The effect of the position and number of Cz group in PQ unit are investigated, which is also first examples for systematic research about the effect of different position of asymmetric PQ as acceptor on deep OLEDs. Their bandgaps of 3.12∼3.19 eV and the singlet state energy levels of 3.12∼3.19 eV were found to be sufficiently large to achieve deep blue light. As expected, these emitters-based OLEDs exhibit deep blue emission with the maximum wavelength ≤ 450 nm and narrow FWHM ≈ 60 nm. Especially, a CIE of y = 0.080 was achieved for 4PQ-Cz-based OLED. Significantly, the deep blue electroluminescence (EL) spectra of these three emitters-based OLEDs are very stable and the corresponding CIE coordinates deviation (ΔCIE (x, y)) can be negligible under the applied voltage ranging from 5 V to 9 V.     

Violet/deep-blue fluorescent organic light-emitting diode based on high-efficiency novel carbazole derivative with large torsion angle

A novel and highly efficient violet/deep-blue fluorescent carbazole and naphthalene-based compound (1) is designed and synthesized. The compound shows intensive violet/deep-blue fluorescence, high photoluminescence efficiency (0.72 in CH₂Cl₂, 0.65 in film) and narrow full width at half maximum (48 nm). The large torsion angles between carbazole and naphthalene guarantee the weak intermolecular interactions and suppress the π-π interactions in solid state, resulting in the highly efficient violet/deep-blue fluorescence. The maximum emission peak, luminance and external quantum efficiency for violet/deep-blue electroluminescence are 410 nm, 1326 cd/m² and ～2%, respectively.     

Bis(4-diphenylaminophenyl)carbazole end-capped fluorene as solution-processed deep-blue light-emitting and hole-transporting materials for electroluminescent devices

A new highly fluorescent bis(4-diphenylaminophenyl)carbazole end-capped fluorene (TCF) is synthesized and characterized. TCF is an amorphous molecular glass with a high glass transition temperature of 169 °C, is electrochemically stable, and gives strong blue emission both in solution and solid state. It showed greater ability as a solution processed blue emitter and hole-transporter for OLEDs than commonly used NPB. High-efficiency, deep-blue and Alq3-based green devices with luminance efficiencies and CIE coordinates of 0.93 cd/A and (0.16, 0.09), and 3.78 cd/A and (0.29, 0.45) were achieved, respectively.     

掺杂发光有机电致磷光器件工作原理及主体材料

本文总结了基于掺杂发光的有机电致磷光器件(PhOLED)中磷光材料被激发的途径及机理,并指出不同主体材料对器件性能的不同影响.全面介绍了小分子主体材料研究的新进展及它们在PhOLEDs器件中的运用.比较和讨论了基于各种不同性质主体材料的器件性能,指出主体材料选择策略.同时讨论了各类主体材料的分子结构、热稳定性、三线态能级、载流子迁移率及HOMO/LUMO能级之间的关系,揭示了上述特性对器件性能影响.     

Synthesis, characterization, photophysics and electrophosphorescent applications of phosphorescent platinum cyclometalated complexes with 9-arylcarbazole moieties

A series of cyclometalating platinum(II) complexes with substituted 9-arylcarbazolyl chromophores have been synthesized and characterized. These complexes are thermally stable and most of them have been characterized by X-ray crystallography. The phosphorescence emissions of the complexes are dominated by ³MLCT excited states. The excited state properties of these complexes can be modulated by varying the electronic characteristics of the cyclometalating ligands via substituent effects, thus allowing the emission to be tuned from bright green to yellow, orange and red light. The correlation between the functional properties of these metallophosphors and the results of density functional theory calculations was made. Because of the propensity of the electron-rich carbazolyl group to facilitate hole injection/transport, the presence of such moiety can increase the highest occupied molecular orbital levels and improve the charge balance in the resulting complexes relative to the parent platinum(II) phosphor with 2-phenylpyridine ligand. The solution-processed electrophosphorescent organic light-emitting diodes doped with these platinum-based phosphors have been fabricated which showed a maximum external quantum efficiency of 2.77% for the best device, corresponding to a power efficiency of 3.48 lm/W and a luminance efficiency of 8.49 cd/A. The present work enables the rational design of platinum-carbazolyl electrophosphors by synthetically tailoring the structure of carbazolylpyridine ring that can permit good color-tuning versatility suitable for multi-color display technology.     

Recent progress in thermally activated delayed fluorescence dendrimers for solution-processed organic light-emitting diodes

During the past decade, the discovery of thermally activated delayed fluorescence (TADF) materials has significantly boosted the development of organic light-emitting diode (OLED) technology. Compared with small-molecule and polymeric TADF materials, TADF dendrimers have emerged as promising emitters for solution-processed OLEDs because they have the integrated advantages of TADF small molecules and polymers in achieving high efficiency, excellent solution processability, and precise molecular structures. In recent years, TADF dendrimers have experienced important advances in molecular design, mechanism exploration and device performance. Herein, we present a comprehensive review of solution-processable TADF dendrimers, mainly focusing on their molecular design principles and structure–property correlations. The advanced device performances of these dendrimers are also summarized. Finally, we proposed the prospects and challenges on the development of TADF dendrimers.     

Triphenylamine and quinoline-containing polyfluorene for blue light-emitting diodes

A novel blue light-emitting polyfluorene-based copolymer PTHD containing electron-rich triphenylamine and electron-poor phenylquinoline side chains in the C-9 position of fluorene unit is described. By comparison of the solution and thin film photoluminescence (PL) spectra of PTHD, a considerable red-shift of Δλ = 10-15 nm was observed in the thin film PL spectrum. The emission intensity of the shoulder peak appeared in dilute solution was also significantly enhanced in the thin film. In contrast to the reference polymer poly{[9,9-dihexylfluorene]-alt-[9,9-di(2,4-diphenylquinoline)fluorene]}, PTHD exhibits higher HOMO energy level, and higher maximum brightness with the PLED device configuration of ITO/PEDOT:PSS/polymer_70% + PBD_30%/TPBI/LiF/Al.     

荧光/磷光混合型白光有机发光二极管的研究

白光有机发光二极管（white organic light-emitting diodes,WOLEDs）在全色显示、固态照明以及背光源等领域有巨大的应用前景,其研究备受关注.其中,荧光/磷光混合型WOLEDs因兼具荧光材料的长寿命和磷光材料的高效率,被认为是目前最有希望实现照明应用的器件结构.荧光/磷光混合型WOLEDs最重要的问题是要解决荧光材料的单线态激子和磷光材料的三线态激子的协同发光.为了避免单线态激子和三线态激子的相互猝灭问题,必须设计有效的器件结构.本文以两种不同三线态能级的蓝光荧光材料为研究对象,介绍了不同高性能荧光/磷光混合型WOLEDs的结构设计与性能.研究表明,载流子传输平衡的高效结构设计和激子分布宽范围内的有效调控是实现高性能荧光/磷光混合型WOLEDs的关键.     

Novel phosphorescent neutral iridium(III) complex with the steric hindrance for highly efficient red organic light-emitting diodes

A novel and highly efficient thiophenquinolone-based red iridium(III) complex bearing a bulky fluorophenyl moiety is designed and synthesized. The complex shows intensive red phosphorescence (596 nm with shoulder at 642 nm), high photoluminescence efficiency (0.62) and broad full width at half maximum (81 nm). The bulky fluorophenyl moiety introduced into the complex could improve the efficiency of electroluminescence with the maximum current efficiency, power efficiency and the external quantum efficiency up to 29.0 cd/A, 30.4 lm/W and 17.6% due to the effective steric hindrance in solid states.     

Evolution of emission manners of organic light-emitting diodes: From emission of singlet exciton to emission of doublet exciton

The emission manners of organic light-emitting diodes(OLEDs) have experienced almost three-decade evolution.In this review,we briefly summarized the emission manners of OLEDs including:(ⅰ) emission from singlet exciton;(ⅱ) emission from triplet exciton;(ⅲ) emission from singlet exciton converted from triplet exciton.Then we introduced a new type of OLEDs with the emission from doublet exciton,wherein organic neutral radicals are used as emitters.Due to the spin-allowed transition of doublet excitons,using neutral radicals as emitters is believed to be a new way to break the 25%upper limit of internal quantum efficiency of OLEDs.The progress of emissive stable neutral radicals is also shortly reviewed.     

Synthesis and characterization of high Tg carbazole-based amorphous hole-transporting materials for organic light-emitting devices

Novel hole-transporting materials based on carbazole dendrimers, namely G1CBC and G2CBC were synthesized and characterized. They are thermally stable with high glass transition temperatures (T_g) up to 245 °C and exhibit chemically-stable redox processes. Double-layer green OLEDs using these materials as the hole-transporting layer (HTL) with the device configuration of ITO/HTL/Alq3/LiF:Al emit brightly (λ_em 522-534 nm) from the Alq3 layer with a maximum luminance and low turn-on voltage of 15,890 cd/m² and 3.0 V, respectively. Their ability as HTLs in terms of device performance is comparable to the common hole-transporter N,N′-diphenyl-N,N′-bis(1-naphthyl)-(1,1′-biphenyl)-4,4′-diamine (NPB), however their thermal properties were far greater than both NPB and N,N′-bis(3-methylphenyl)-N,N′-bis(phenyl)benzidine (TPD).