Double groove silicon grating polarizer in telecommunication wavelength band

In this paper, we propose an ultra broad band polarizer operating in the telecommunication wavelength band, this device consisting a double groove silicon grating is designed with using the inverse mathematical method and rigorous vector diffraction theory. It is shown from our calculations that the device presents extremely high reflection (R > 95%) for TE polarization light and high transmission (T > 95%) for TM polarization over ∼400 nm wavelength range, moreover, the extinction ratio is ∼30 in the central wavelength 1550 nm. Furthermore, it is found with rigorous coupled wave analysis (RCWA) that the extremely wide band property for TE polarization is due to the excitation of strong modulation guided modes in the design wavelength range.     

Spatially-variable retardation plate for efficient generation of radially- and azimuthally-polarized beams

We investigate conversion of a linearly-polarized Gaussian beam to a radially- or an azimuthally-polarized doughnut (0, 1)^∗ Laguerre-Gaussian (LG) beams, performed with a spatially-variable retardation (SVR) plate. The SVR plate is composed of eight sectors of a λ/2 retardation plate, each one with different orientation of the to crystal’s slow axis. The analysis reveal that nearly-pure radially- or azimuthally-polarized LG(01)^∗ beam with M² = 2.2 can be obtained, while the transformation efficiency is 89.6%. In the experiments, performed with Nd:YAG laser, we transformed a Gaussian beam with M² = 1.3 to a radially- and azimuthally-polarized (0, 1)^∗ Laguerre-Gaussian beams with M² = 2.5. We carefully characterized the polarization state of the obtained radially- and azimuthally-polarized beams, measuring Stokes parameters. The polarization purity of the obtained beams, calculated from the measured data, was as high as 96%.     

Polarization-selective subwavelength grating used with 193 nm light

Hyper-NA ArF (193 nm) immersion lithography is one of the most potential technologies to achieve 32 nm critical dimension node. At the corresponding large angles in the photoresist, control of polarization becomes necessary. A polarization beam splitter (PBS) based on a subwavelength dielectric grating has been designed for use with 193 nm light. The polarization-selective property of such grating is explained by the mechanism of mode interference. The designed grating working as a 1 × 2 beam splitter can transmit TM wave (∼ 90%) to the zeroth order with extinction ratio of 753, and it diffracts TE wave (∼ 80%) to the −1st order with extinction ratio of 300.     

石英波片偏光干涉谱的研究

根据石英晶体双折射率的色散特性,对石英波片的偏光干涉谱进行了理论分析和数值模拟,提出了一种石英波片延迟量和厚度的偏光干涉标定法。即由偏光干涉谱,可以得出石英波片在200~2000 nm宽光谱范围内的延迟量;通过对长波段的偏光干涉谱极值波长的精确判断,可以准确地计算出该石英波片的厚度。利用Lambda900紫外-可见-近红外分光光度计对一片石英波片的偏光干涉谱进行了测量。在波长精度为0.1 nm的情况下,测量的厚度精度为0.1μm。误差分析结果表明,通过提高光谱的最小分辨力及选择较长的光谱波段进行测量计算,可以有效地降低误差。     

High-stability single-frequency green laser with a wedge Nd:YVO4 as a polarizing beam splitter

The effect of the large power depletion of the fundamental wave in the phase-matched polarization on the stability of the second-harmonic wave output from an intracavity frequency-doubled ring laser is discussed. It has been demonstrated that the instability resulting from the unbalanced power depletion of the fundamental waves can be eliminated by using a wedge laser rod. The function dependence of the wedge angle and the laser power is concluded. An intracavity frequency-doubled ring laser with a wedge Nd:YVO₄ laser crystal and a LBO doubler is designed and built. Comparing with similar lasers but without using the wedge laser crystal, the frequency-conversion efficiency, the power stability and the polarization purity of the second-harmonic wave output from the laser with a wedge laser rod are significantly improved. The single-frequency green laser of 6.5 W at 532 nm, with the polarization degree more than 500:1 and the power stability better than ±0.3% for 3 h, was experimentally achieved.     

Characterization of structural irregularities in highly birefringent photonic crystal fiber using torsional acoustic polarization coupling

We demonstrate a novel method to characterize structural irregularities in a highly birefringent photonic crystal fiber (HB PCF) with high accuracy based on polarization coupling by torsional acoustic wave. Birefringence variation induced by the irregularities of air-hole structure in the fiber cross-section is analyzed via the transmission spectra of the acousto-optic coupling between two orthogonal polarization modes propagating along the fiber. The estimated maximum birefringence variation of two sections in the same batch of the HB PCF is 3 × 10^− 6 and 10^− 5, respectively, from nominal birefringence value of 4.86 × 10^− 4. The comparison between the experimental results and the numerical simulation resulted in the estimation of few tens of nm variation in the air-hole structure in the PCF.     

Wide band polarizer with suspended silicon grating

In this paper, we propose an ultra broadband polarizer operating in the telecommunication wavelength band; this device consisting a single silicon suspended resonant grating layer is designed with using the inverse mathematical method and rigorous vector diffraction theory. It is shown from our calculations that the device presents extremely high reflection (R > 98%) for TE polarization light and high transmission (T > 98%) for TM polarization over ∼330 nm wavelength range; moreover, the extinction ratio is ∼100 in the central wavelength 1550 nm. Furthermore, it is found with Rigorous Coupled Wave Analysis (RCWA) and near field distribution that the extremely wide band property for TE polarization is due to the excitation of strong modulation guided modes in the design wavelength range.     

激光回馈波片位相延迟测量的误差源及消除方法

激光回馈法是一种新型的波片位相延迟测量方法。将波片放置在激光器与回馈镜之间,可使激光回馈波形产生偏振90°旋转（即跳变）现象,而两偏振态所占的周期比（占空比）与波片的位相延迟相关。通过测量占空比即可由计算机自动给出波片位相延迟。采用双向扫描回馈镜,2次获得并测出占空比,这样可以很好地消除两偏振态损耗的波动造成的测量误差,提高了该方法长期测量的稳定性。测量的重复性达到0.5°。该方法结构简单,在线测量精度高,满足工业化生产的需要。     

Achromatic half-wave combination of birefringent plates

Half-wave retarders are primarily used in rotating the plane of polarization of polarized light. These retarders usually exhibit strong wavelength dependence. In this paper, the design and characteristics of an achromatic half-wave plate, formed by a cascaded system of birefringent plates, have been studied. Pancharatnam proposed a combination of three retarders in series and discussed the possibility of fabricating reasonably good achromatic quarter-wave plate with a suitable combination of their retardance. The system studied here is similar in construction to Pancharatnam configuration and behaves as an achromatic half-wave plate over a wide spectral range. The proposed configuration exhibits a maximum variation of only about ±1.4 degree over the entire wavelength range of 500–750 nm. In our analysis we have used Jones matrix formalism for the derivation of the general expression for the equivalent retardation and the azimuth of the combination.     

椭偏法测量云母波片相位延迟量及双折射率(英文)

为了得到云母波片的相位延迟量和双折射率随波长的变化关系,利用椭偏光谱仪连续测量了云母波片在400～770nm光谱范围内的延迟量.在对云母波片进行校准后,测量的数据被光电探测器收集并输送到计算机,根据输出的数据可以得到云母波片的相位延迟量随波长的变化.利用测得的延迟量计算出了云母波片在一定光谱范围内的双折射率,得到了云母波片的双折射率色散曲线,并通过拟合得到了双折射率色散公式.该方法能测量任意波片的相位延迟量,并且具有测量方便、周期短、精度高等特点.     

Focusing properties of cylindrical vector vortex beams with high numerical aperture objective

Focused by a high numerical-aperture objective in free space, the cylindrical vector beam phase-encoded by vortex phase plate with higher topological charge was capable to generate the doughnut-shaped spot in the vicinity of the focal region. The width of the dark focal spot was manipulated by the phase plate with different topological charge. The relationship between the properties of the focal spot and the vortex phase plate was explicitly analyzed for the input beam with different cylindrical vector polarization. Furthermore, the experimental verification was undertaken at the incidence beam λ = 635 nm with the radial and azimuthal polarization. The experimental results are in excellent agreement with the theoretical calculation.     

A spectroscopic method for determining thickness of quartz wave plate

A spectroscopic method to determine thickness of quartz wave plate is presented. The method is based on chromatic polarization interferometry. With the polarization-resolved transmission spectrum (PRTS)curve, the phase retardation of quartz wave plate can be determined at a wide spectral range from 200 to2000 nm obviously. Through accurate judgment of extreme points of PRTS curve at long-wave band, the physical thickness of quartz wave plates can be obtained exactly. We give a measuring example and the error analysis. It is found that the measuring precision of thickness is mainly determined by the spectral resolution of spectrometer.     

A novel double-Brillouin-frequency spaced multi-wavelength Brillouin erbium-doped fiber laser based on non-linear amplified fiber loop mirror

In the paper, a ring double-Brillouin-frequency spaced multi-wavelength Brillouin erbium-doped fiber laser based on non-linear amplified fiber loop mirror filter is demonstrated, in which the non-linear amplified fiber loop mirror (AFLMF) is used as a filter. At the 980 nm pump power of 10.29 dBm, the tunable laser source center wavelength of 1563 nm and power of −3 dBm, up to 12 even output channels with 0.16 nm spacing are achieved. At the same time, we study the influence of 980 nm pump power, the polarization controller and the tunable laser source center wavelength on the number of Stokes light wave.     

Photoluminescence and electroluminescence studies of polyvinyl carbazole films

Polyvinyl carbazole (PVK) film has been prepared by solution method. Its absorption, photoluminescence (PL) and electroluminescence (EL) have been studied. For PL and absorption studies, film of PVK was prepared by spreading PVK solution on clean glass plate. The dried film was taken out of the glass plate and used for absorption, thickness measurement and PL studies. The film is transparent in the visible region and absorption starts at 340 nm wavelength. The absorption peaks are obtained at 280, 250 and 220 nm, indicating that optical gap of film is 3.65 eV and molecular orbitals exist at 4.43, 4.96 and 5.64 eV. PL studies reveal that excitation by violet light gives luminescence at 430, 480 and 690 nm. For EL studies, cell is prepared by depositing PVK film on a portion of conducting glass plate and taking aluminum foil as second electrode. It is observed from the characteristics that the current varies linearly, where as EL intensity varies non-linearly with increasing voltage. Higher brightness has been observed at higher frequencies. EL spectrum shows a sharp peak at 400 nm and a broad and less intense peak at 700 nm, which are attributed to radiative decay of singlet exciton and defect centers, respectively.     

All-fiber single polarized Yb-doped fiber laser with a high extinction ratio

We present an all-fiber design for a single polarization Yb-doped fiber laser with all-fiber connections spliced. Single polarization with a high extinction ratio was achieved by the design of a laser cavity consisting of a fiber Bragg grating inscribed on a single-polarization fiber as a high reflective mirror and a piece of end-cleaved single-polarization fiber as an output coupler. The fiber laser operates at 1063.25 nm with an output power of 1.7 W, an optical signal- to-noise ratio of 70 dB and a narrow bandwidth of 54 pm. The laser output has a polarization extinction ratio of 700:1 or 28 dB, and a very stable power output.     

Design and fabrication of ultra-high precision thin-film polarizing beam splitter

An ultra-high precision thin-film polarizing beam splitter (PBS) has been designed and fabricated. Using Needle optimization technology, we design the thin-film polarizing beam splitter that is transparent for P polarization and reflective for S polarization with ultra-high precision at 64.8° angle of incidence and 632.8 ± 10 nm wavelength band. The experiments with the fabricated thin-film PBS demonstrate that both the reflectance of P polarization and transmittance of S polarization at 64.8° angle of incidence and 632.8 nm wavelength point are less than 0.02%, which is ultra-high for reported PBSs.     

C-band three-port tunable band-pass thin film optical filter with low polarization-sensitivity

According to the oblique incidence characteristics of thin film narrowband filter, the stack of 100 GHz DWDM four cavities angle-tuned thin film filter has been designed and optimized. The two polarization modes’ central wavelengths of the thin film filter can be centered at the same one in oblique incidence, and it has a stable tuning range of 20 nm without the phenomenon of polarization central wavelength separation. Using this kind of angle-tuned thin film filter and the polarization beam-splitters, the tuning range of the angle-tuned thin film filter can be further expanded due to the reason that it can transmit only the s-polarization light. In this paper we also developed a three-port bandpass tunable filter device with new structure, which tuning range can cover the whole C-band and its adjacent channel isolation degree is high. The experiments show that the three-port tunable filter has an effective tuning range of 33 nm, and its adjacent channel isolation degree is more than 35 dB. It has a bright application opportunity for its flexibility and effective performance.     

Highly birefringent photonic crystal fiber polarization splitter made of soft glass

A soft glass dual core polarization splitter based on highly birefringent photonic crystal fiber (PCF) is proposed and the full vector finite element method (FEM) is employed to analyze the impacts of structural parameters on birefringence and the coupling length, and simulation results show that high birefringence on the order of 10⁻² can be obtained at 1.55 μm, moreover, hole size, hole pitch and elliptic ratio all affect birefringence and the coupling length. Based on these results, the PCF's structure is optimized to realize a polarization splitter of 282 μm whose largest extinction ratio is around −45.42 dB at 1.55 μm. Meanwhile, the bandwidth at the extinction ratio of −10 dB is about 90 nm, and around 32 nm at −20 dB.     

High efficiency fiber coupling to silicon sandwiched slot waveguides

The design of a fiber coupler for high efficiency light coupling to silicon sandwiched slot waveguides is reported. The proposed fiber coupler is based on the inverted taper approach. Parameters have been optimized to maximize coupling efficiency for λ = 1550 nm and TM polarization. Maximum coupling efficiencies of 93% for a inverted taper length of 150 μm and a inverted taper tip width of 40 nm have been obtained by means of the overlap integral and 3D beam propagation method (BPM) simulations.     

Mueller matrix-based optimization of reflective type twisted nematic liquid crystal SLM at oblique incidences

Mueller matrix measurements were used to characterize the polarization properties of liquid crystal-based reflective type twisted nematic (TN) special light modulator (SLM) at oblique incidence of the laser beam. The experimentally obtained Mueller matrices were used to obtain the combination of polarization optics required to optimize it for phase only modulation. The results indicate that minimum intensity modulation is obtained with the use of a polarizer followed by a quarter wave plate (QWP) in polarization state generator (PSG) arm and a QWP followed by an analyzer in polarization state analyzer arm (PSA). Polarization parameters such as retardance, rotation and depolarization were calculated from the experimentally obtained Mueller matrices using polar decomposition method at different angle of incidences of the laser beam and the results has been discussed. The similarity between retardance and depolarization curve as a function of address voltage of TNSLM indicated that depolarization is mainly associated with errors in retardance values. Further, spectral Mueller matrix measurements were used to obtain intensity modulation response in the range of wavelengths 450-700 nm for broadband applications.