Potentiometric study of reaction between tetrabutylammonium periodate and phenothiazine in chloroform; application to the analysis of phenothiazine derivatives

The reaction between tetrabutylammonium periodate and phenothiazine in the presence of the strong acids in chloroform was studied by potentiometry and the reaction pathways were determined. The oxidimetric titration conditions of phenothiazine derivatives using a standardized chloroform solution of tetrabutylammonium periodate were optimized and a potentiometric detection of end points was utilized. The relative standard deviation for the determination of 5 mg phenothiazines was obtained about 1-1.5%. The method was applied for the determination of phenothiazines in various pharmaceutical preparations after extraction into chloroform.     

Carbonyl allylations by allylic chlorides utilizing a reduction of tin(IV) iodide to triiodostannate(II) species with iodide sources

Carbonyl allylations by allylic chlorides either with tin(IV) iodide and tetrabutylammonium iodide (TBAI) in dichloromethane or with tin(IV) iodide and sodium iodide in 1,3-dimethylimidazolidin-2-one at room temperature produced the corresponding homoallylic alcohols. The carbonyl allylations probably proceeded via the reduction of tin(IV) iodide to triiodostannate(II) species with iodide sources such as TBAI and NaI, which led to the construction of a tin(IV)-catalytic cycle based on regeneration of tin(IV) iodide via the transmetalation of homoallyloxytriiodotin to homoallyloxytrimethylsilane with iodotrimethylsilane.     

Extraction separation of cadmium and zinc with tetra-n-butylammonium iodide

Tetra-n-butylammonium iodide (TBAI) forms associations in chloroform and aqueous solutions. A TBAI solution in chloroform extracts hydroiodic acid by addition. From 0.5M hydroiodic acid medium cadmium is quantitatively extracted into a TBAI solution in chloroform. Under these conditions zinc is not extracted. This makes possible the extractive separation of cadmium from zinc in micro-or macroamounts.     

Effect of bromide on the interfacial structure of aqueous tetrabutylammonium iodide: Photoelectron spectroscopy and molecular dynamics simulations

Solvation of surface-active tetrabutylammonium iodide (TBAI) in liquid water and in sodium bromide aqueous solution was investigated by VUV photoelectron spectroscopy and by molecular dynamics simulations. The observed signal intensity changes in the photoemission spectra are consistent with the varying propensities of the different ions for the solution interface. While the cations are surface-bound due to hydrophobic interactions, the anions are driven to the vacuum/solution interface by their large polarizability and size. Iodide is more polarizable, and hence more surface-active than bromide, which explains the relatively small decrease of the iodide photoemission signal when TBAI is dissolved in bromide solution.     

Potentiometric titration of phenothiazine compounds in chloroform and its use in pharmaceutical analysis

The potentiometric titration of some phenothiazine drugs in chloroform is described. A standard solution of bromine in chloroform was used as titrant and the end-points were detected with a small platinum indicator electrode, and an Ag/AgCl electrode in 0.01M Et(4)NCl in chloroform as reference. A fast redox reaction occurs during the titrations and the phenothiazine ring is oxidized to the phenothiazonium free radical (P(+)). The low dielectric constant of the medium favours the formation of (P(+)Br(-)) ion-pairs or (P(+)Br(-)(3)) ion-pairs on further addition of bromine, which has no influence on the position of the first end-point. The method was used for the determination of promethazine, chlorpromazine, trifluoperazine and thioridazine in pharmaceutical preparations after extraction into chloroform. The relative standard deviation for the determination of 5 mg of all these phenothazines was about 1%.     

Potentiometric titration of gold in ores with potassium iodide

Summary A direct potentiometric titration method for the determination of gold in ores and alloys is described. It is based on the reduction of Au(III) with iodide ions yielding accurate and reproducible results. Detection limit and sensitivity were 0.06 and 0.032 mg/l Au, respectively. The linear response range was between 0.1 and 120 mg/l Au. The method can be used for the routine assay of gold in different kind of samples.     

Determination of iodide with potassium dichromate and sodium vanadate in the presence of acetone

The determination of iodide with potassium dichromate and sodium vanadate in 6-8M phosphoric acid medium by potentiometric or visual titration is described. Ferroin and barium diphenylamine sulphonate (BDAS) are used as the indicators in the visual titration with potassium dichromate and sodium vanadate respectively. Acetone is used to stabilize the iodonium ions liberated, in the visual titration. Iodide can also be determined with sodium vanadate in 2-4M sulphuric acid medium with BDAS as indicator in the presence of oxalic acid as catalyst and acetone to stabilize the liberated iodine cations. The visual procedures are applied for the determination of iodide in tincture of iodine. The formal potentials of the iodine/iodide couple in various phosphoric acid media are reported.     

Sulfonylation of C(sp3)–H bond for synthesis of 2-sulfolmethyl azaarenes catalyzed by TBAI in water

Research on Chemical Intermediates - A tetrabutylammonium iodide (TBAI)-catalyzed method for synthesis of 2-sulfolmethyl quinolone has been developed. Using water as solvent, a wide range of...     

Microdetermination of L-ascorbic acid in pharmaceutical preparations by iodide ion-selective electrode and spectrophotometry

Two methods for determining low levels of L-ascorbic acid in pharmaceutical preparations are described. The potentiometric method is based on oxidation of an aqueous ascorbic acid solution with iodine in chloroform. The iodide ions produced in the aqueous phase are determined with the iodide ion-selective electrode using a standard calibration graph technique. The spectrophotometric method is based on oxidation of ascorbic acid with iron(III). The equivalent amount of iron(II) produced is determined as iron(II)-2,4,6-tri(2-pyridyl)-triazine chelate at 595 nm. The results show a mean recovery of 100.067±0.1435 for the potentiometric method, 100.267±0.32 for the spectrophotometric method.     

A Simple and Practical Method for the Oxidation of Thiols to Disulfides at Mild Conditions Without Solvents

Abstract

A green, straightforward, and novel method for the oxidation of thiols to the corresponding disulfides is reported using hydrogen peroxide catalyzed by tetrabutylammonium iodide (TBAI) without solvents at room temperature. The corresponding disulfides were obtained with excellent yields and short reaction times.     

Regio- and diastereocontrol in carbonyl allylation by 1-halobut-2-enes with Tin(II) halides

Regio- and diastereoselective carbonyl allylations of 1-halobut-2-enes with tin(II) halides are described. Tin(II) bromide in a dichloromethane-water biphasic system is an effective reagent for unusual alpha-regioselective carbonyl allylation of 1-bromobut-2-ene to produce 1-substituted pent-3-en-1-ols. The addition of tetrabutylammonium bromide (TBABr) to the biphasic system produces 1-substituted 2-methylbut-3-en-1-ols via usual gamma-addition which is opposite to the alpha-addition without TBABr. The gamma-addition to aromatic aldehydes exhibits anti-diastereoselectivity, while that to aliphatic aldehydes is not diastereoselective. The allylation of benzaldehyde by 1-chlorobut-2-ene in 1,3-dimethylimidazolidin-2-one (DMI) does not occur with tin(II) chloride or bromide but does proceed with tin(II) iodide and exhibits gamma-syn selectivity which is unusual for a Barbier-type carbonyl allylation. In the carbonyl allylation by 1-chlorobut-2-ene with any tin(II) halide, the addition of tetrabutylammonium iodide (TBAI) accelerates the reaction and enhances gamma-syn selectivity. The use of tin(II) iodide and TBAI produces 2-methyl-1-phenylbut-3-en-1-ol with high yield and high syn-diastereoselectivity. The syn-diastereoselective carbonyl allylation of 1-chlorobut-2-ene using tin(II) iodide, a catalytic amount of TBAI, and NaI in DMI-H(2)O is applied to various aldehydes.     

Selective mono protection of diols, diamines, and amino alcohols using cesium bases

Efficient synthetic methods were developed for the synthesis of mono xanthates, as well as mono dithiocarbamates of diamines and amino alcohols. This protocol utilizes the three component coupling of diols, diamines, and amino alcohols using alkyl bromides and carbon disulfide in the presence of a cesium base and tetrabutylammonium iodide (TBAI).     

Reversible "off-on" fluorescent chemosensor for Hg2+ based on rhodamine derivative

A novel and simple fluorescent chemosensor based on rhodamine was designed and synthesized to detect Hg(2+) with high selectivity. The structure of chemosensor 1 was characterized by IR, (1)H NMR, and HRMS spectroscopies. Chemosensor 1 exhibited distinct fluorescent and colorimetric changes toward Hg(2+) in an ethanol/water (80/20, v/v) solution, which resulted in the formation of 1/Hg(2+) complex with the Hg(2+)-induced ring opening of the spirolactam ring in rhodamine. The reversibility of chemosensor 1 was verified through its spectral response toward Hg(2+) ions and TBAI (tetrabutylammonium iodide) titration experiments.     

Applications,involving the iodide ion: VIII. Direct and indirect determination of mercury(I) and analysis of mixtures. Analysis of chromium(VI)-chromium (III) mixtures. Determination of hypochlorite

Mercury(I), down to 3 ppm, has been accurately determined by direct titration with iodide or by back-titrating excess of iodide with mercury (II) using silver amalgam as the indicator electrode. The direct method and additional volumetric ones were applied to the rapid analysis of various mixtures involving mercury(I) with fair accuracy and precision. Analysis of Cr(VI)-Cr(III) mixtures involved potentiometric back-titration of excess iodide and of excess EDTA separately with mercury(II). Back-titration of excess iodide was successfully applied to the determination of hypochlorite.     

A combination of synchronous fluorescence spectroscopy with chemometric treatment and internal standards in non-aqueous potentiometric titrations of fulvic acids

The acid properties of a soil fulvic acid (sfua) were characterized by potentiometric titration with tetrabutylammonium hydroxide in two non-aqueous solvents with high acid—base resolution power N,N-dimethylformamide (DMF) and acetonitrile. Synchronous fluorescence spectroscopy (SyF) was also used to monitor directly the sfua status during the potentiometric titration in DMF. The potentiometric titration curves showed no clear end-point and the analysis of the sets of spectra obtained at increasing neutralization degree, with a self-modeling curve resolution method (SIMPLISMA), revealed the existence of two components with featureless concentration profiles. Internal standards (maleic, salicylic and p-hydroxylbenzoic acids) were used to determine the amounts of acid groups with different acid strengths in the two non-aqueous solvents. It was shown that the variations observed in the SyF spectra sets of the internal standards are not correlated with those observed in the sfua data. The splitting of the sfua groups in the non-aqueous titration curves seems to be forced artificially depending on the standards used.     

Cs(2)CO(3)-promoted efficient carbonate and carbamate synthesis on solid phase

[reaction: see text] Mild and efficient preparation of alkyl carbonates and carbamates on solid supports is described herein. Alcohols or amines were coupled with Merrifield's resin through a CO(2) linker in the presence of cesium carbonate and tetrabutylammonium iodide (TBAI).     

Determination of quaternary ammonium compounds by potentiometric titration with an ionic surfactant electrode: single-laboratory validation

A potentiometric titration for determining the quaternary ammonium compounds (QAC) commonly found in antimicrobial products was validated by a single laboratory. Traditionally, QACs were determined by using a biphasic (chloroform and water) manual titration procedure. Because of safety considerations regarding chloroform, as well as the subjectivity of color indicator-based manual titration determinations, an automatic potentiometric titration procedure was tested with quaternary nitrogen product formulations. By using the Metrohm Titrando system coupled with an ionic surfactant electrode and an Ag/AgCl reference electrode, titrations were performed with various QAC-containing formulation products/matrixes; a standard sodium lauryl sulfate solution was used as the titrant. Results for the products tested are sufficiently reproducible and accurate for the purpose of regulatory product enforcement. The robustness of the method was measured by varying pH levels, as well as by comparing buffered versus unbuffered titration systems. A quantitation range of 1-1000 ppm quaternary nitrogen was established. Eight commercially available antimicrobial products covering a variety of matrixes were assayed; the results obtained were comparable to those obtained by the manual titration method. Recoveries of 94 to 104% were obtained for spiked samples.     

Sunlight assisted solvent free synthesis of tert-butylperesters

Abstract

A green and efficient methodology has been developed for the direct conversion of aryl aldehydes to the corresponding tert-butyl peresters. The reaction has been carried out in absence of any solvent and the sunlight is used as the green source of energy. In this reaction tetrabutylammonium iodide (TBAI) acts as the mild organo catalyst and tert-butyl hydroperoxide (TBHP) serve as the source of tert-butyl group.     

Tetrakis(4-N,N-dimethylaminobenzene)porphyrinato]manganese(III) acetate as a novel carrier for a selective iodide PVC membrane electrode.

[5,10,15,20-Tetrakis(4-N,N-dimethylaminobenzene)porphyrinato]Mn(III) acetate (MnTDPAc) was applied as an ionophore for an iodide-selective PVC membrane electrode. The influences of the membrane composition, pH of the test solution and foreign ions on the electrode performance were investigated. The sensor exhibited not only excellent selectivity to iodide ion compared to Cl- and lipophilic anions such as ClO4- and salicylate, but also a Nernstian response with a slope of -59.4 +/- 1.2 mV per decade for iodide ions over a wide concentration range from 1.0 x 10(-2) to 7.5 x 10(-6) M at 25 degrees C. The potentiometric response was independent of the pH of the solution in the pH range of 2 - 8. The electrode could be used for at least 2 months without any considerable divergence in the potential. Good selectivity for iodide ion, a very short response time, simple preparation and relatively long-term stability were the silent characteristics of this electrode. It was successfully used as an indicator electrode in the potentiometric titration of iodide ions, and also in the determination of iodide from seawater samples and drug formulations.     

Mild and efficient Cs2CO3-promoted synthesis of phosphonates

A mild and convenient synthesis for phosphonates using cesium carbonate (Cs₂CO₃), tetrabutylammonium iodide (TBAI) and DMF was developed at room temperature. Numerous dialkyl phosphites were screened using a diverse array of alkyl halides and these reaction conditions were found to be highly efficient producing various phosphonates exclusively in moderate to high yields.