An improved method for the flow-injection determination of iodine using the luminol chemiluminescence reaction in a reversed micellar medium of cetyltrimethylammonium chloride in 1-hexanol-cyclohexane.

To eliminate the use of chlorinated hydrocarbons, we have improved the method for the flow-injection (FI) determination of iodine based on the chemiluminescence reaction of iodine with luminol in a chloroform-free reversed micellar medium of the surfactant cetyltrimethylammonium chloride (CTAC) using a mixture of 1-hexanol-cyclohexane as a bulk solvent. The FI procedure used simply involves the mixing of an iodine solution in cyclohexane with the chemiluminescent reagent solution of luminol in the reversed micellar medium of CTAC in 0.38 M 1-hexanol in cyclohexane/water (buffered with sodium carbonate). The optimum conditions for the iodine determination were evaluated and a detection limit (DL) of 0.05 ng cm(-3) iodine was achieved. The calibration graph obtained was linear with a dynamic range from the DL to 10 ng cm(-3) iodine. The relative standard deviations (n=5) observed at all concentrations within the linear range were less than 2.5%. The improved FI method is rapid and equally sensitive like the original one and was found to be suitable for the determination of trace iodine.     

Characterization of a micro spiral flow cell for chemiluminescence detection

A 5.5 μl spiral micro-flow cell, mounted in front of a photomultiplier, is made from Teflon capillary (75 cm×100 μm ID) with two inlets for the CL reagent and carrier buffer and a waste outlet. It allows the rapid mixing of CL reagent and analyte and simultaneous detection of the emitted light. Using a flow rate of 25 μl/min for a 0.4 mM luminol-8 μM hemin solution (pH 11.6) and 50 μl/min of carrier buffer (pH 11.6), the slight exponential calibration curve for the flow injection–chemiluminescence (FI–CL) determination of H₂O₂ is 2.5–10 μM and the detection limit is 1.5 μM. The detection limit achieved by using a spiral flow cell is 24 times lower than that obtained from a conventional FI system with a low dead volume tee mixer and a 12 μl flow cell in a HPLC fluorometer with the source lamp off. This luminol CL detection method is successfully applied to the enzymatic determination of -lactate by FI. The lactate sample is mixed with polyethylene glycol (PEG)-stabilized lactate oxidase (LO) enzyme and then injected into the buffered (pH 7.5) carrier stream for CL detection of the H₂O₂ product. Using the optimal conditions of reaction temperature set to 37.5 °C and flow rates of 45 μl/min for the CL reagent and 60 μl/min for the carrier buffer, the calibration range for lactate is 5–50 μM and the detection limit is 2.9 μM. This method is applied to the determination of -lactate in beer.     

Flow-Injection Study and Analytical Applications of the Reactions of Palladium(II) and Platinum(IV) with Tin(II) Chloride in Hydrochloric Acid Solutions

The interaction of palladium(II) and platinum(II) with tin(II) chloride in hydrochloric acid solutions was studied by flow-injection (FI) spectrophotometry. It was found using kinetic measurements in the stopped flow mode that the composition of detected products and the rate of their formation depend on the concentrations of tin(II) and chloride ions in the reaction zone and on the acidity of the solution. Optimal FI conditions were found, and the selectivity of interaction of palladium(II) with tin(II) chloride was estimated for the detection of the signal at 407 nm (yellow form) and 646 nm (green form). It was demonstrated that the reaction of the formation of yellow platinum(IV) complexes is slower than that for palladium(II), especially at rather low concentrations of hydrochloric acid in the reaction flow. Based on the detection of green complexes of palladium(II) with tin(II) chloride, a flow injection method was proposed for the selective spectrophotometric determination of palladium(II) in the presence of other platinum-group metals. The height of the recorded peak is directly proportional to the concentration of palladium(II) in the injected solution in the range of 0.028–0.300 mM. The method was used for the analysis of pharmaceuticals and industrial catalysts.     

Spectrofluorimetric assays for rat liver phenol sulphotransferases I/II and III/IV based on a common substrate

A spectrofluorimetric method for the separate assay of two subgroups of rat liver phenol sulphotransferases (PSTs I and II and PSTs III and IV) has been established. The method is based on the enzyme reaction using two different concentrations of p-hydroxybenzaldehyde (10 μM for PSTs III/IV and 3 mM for PSTs I/II) as the substrate and the spectrofluorimetric determination of the product p-formylphenyl sulphate by means of its reaction with 1,4-dimethyl-3-carbamoylpyridinium chloride, a selective reagent for aromatic aldehydes without free phenolic hydroxy groups. The detection limit of the sulphate is 50–70 pmol in the enzyme reaction mixutre. The K_m values for p-hydroxybenzaldehyde with PSTs I/II and III/IV were 1.1 mM and 2.1 μM, respectively. The effects of growth and of dexamethasone treatment of rats on the liver PST activities were also studied.     

Synthesis of silver nanowires and their applications in the electrochemical detection of halide

A silver nanowires modified platinum (Ag NWs/Pt) electrode was developed for simultaneous and selective determination of chloride, bromide and iodide ions by cyclic voltammetry in aqueous solutions. Silver nanowires were synthesized by an l-cysteine-assisted poly (vinyl pyrrolidone) (PVP)-mediated polyol route. X-ray diffraction (XRD) and scanning electron microscopy (SEM), transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy (EDS) were employed to investigate the prepared nanowires. The intrinsic high surface area and the fast electron transfer rate ascribed from the nanowire structure could further improve halide detection performance. The determination was based on measurement of the well-separated oxidation peak currents of respective silver halides formed on the surface of silver during an anodic potential sweep. The concentration range was linear from 50 μM to 20.2 mM for bromide and iodide and 200 μM to 20.2 mM for chloride, and the sensitivity was 0.059 μA/mM, 0.042 μA/mM and 0.032 μA/mM for chloride, bromide and iodide, respectively. The correlation coefficient was 0.999 in each case. The Ag NWs/Pt electrode offered a useful platform for the development of a highly sensitive halide sensor.     

Repetitive determination of chloride using the circulation of the reagent solution in closed flow-through system

The precipitation reaction of silver chloride (AgCl) is carried out in a large amount of ammonia (NH₃). This makes possible to adopt a closed-loop flow injection (FI) system and to determine chloride repetitively. A solution of 30 mmol l⁻¹ silver nitrate and 80 mmol l⁻¹ NH₃ in a single reservoir (250 ml) is continuously circulated through the flow cell at a flow rate of 2.0 ml ml⁻¹. The chloride containing sample (100 μl) was introduced into this reagent solution by means of six-way valve. AgCl precipitates formed in the sample zone are monitored spectrophotometrically (at 500 nm) in the flow system. After passing through the flow cell, the excess NH₃ in the circulating reagent solution dissolves AgCl precipitates and the stream then returns to the reservoir. Various variables of the FI system were optimized and a study of interfering ions was also carried out. A linear calibration graph was obtained from 3.0 to 30 mg l⁻¹ chloride. Two hundred repetitive injections of 5.0 mg l⁻¹ chloride into the circulating reagent solution have shown unchanged base-line and good reproducibility. The method was successfully applied to the determination of chloride in tap, natural and the reference waters.     

Sequential flow injection determination of iodate and periodate with spectrophotometric detection

A flow injection (FI) system is described for the sequential determination of periodate and iodate based on their reaction with iodide at pH 3.5. Two sample plugs were injected into the same carrier stream sequentially. One injection is for the iodate determination and the other for the sum of iodate and periodate determination. For iodate determination, molybdate solution buffered at pH of 3.5 was used for selective masking of periodate. The influences of reagent concentrations were studied by a univariable method and the influence of FI manifolds was studied using univariable and simplex method. Periodate and iodate can be determined in the range of 0.050-5.0 and 0.050-10 microg/ml, respectively. The 3 sigma limit of detection was 0.030 and 0.050 microg/ml for periodate and iodate, respectively. The proposed method has been applied for the sequential determinations of periodate and iodate in water samples.     

Silver-selective sensor using an electrode-separated piezoelectric quartz crystal modified with a chitosan derivative.

Silver(I) adsorbed selectively onto a quartz plate modified with N-(2-pyridylmethyl)chitosan in an ammonium chloride buffer solution containing EDTA, and the frequency of the quartz plate increased. It was supposed that the increasing frequency was caused by the desorption of adsorbed water on the chitosan derivative, which was induced from the reaction of silver(I) with the chitosan derivative. The concentration of the buffer, pH, temperature, conductivity and eluent affected the frequency shift resulting from the adsorption of silver(I). The frequency decreased at a conductivity lower than 2.2 mS/cm, and increased with increasing conductivity above this value. The frequency shifts caused by the adsorption of silver(I) were proportional to the concentration over the range 10-80 nM of silver(I), and the correlation coefficient was 0.9969. The detection limit and the relative standard deviation at 50 nM for five times were 6 nM and 3.4%, respectively. The proposed method was simple while showing higher sensitivity and selectivity.     

Flow injection on-line displacement/solid phase extraction system coupled with flame atomic absorption spectrometry for selective trace silver determination in water samples

A novel flow injection (FI) on-line displacement solid phase extraction preconcentration and/or separation method coupled with FAAS in order to minimize interference from other metals was developed for trace silver determination. The proposed method involved the on-line formation and subsequently pre-sorption of lead diethyldithiocarbamate (Pb-DDTC) into a column packed with PTFE-turnings. The preconcentration and/or separation of the Ag(I) took place through a displacement reaction between Ag(I) and Pb(II) of the pre-sorbed Pb-DDTC. Finally, the retained analyte was eluted with isobutyl methyl ketone (IBMK) and delivered directly to nebulizer for measuring. Interference from co-existing ions with lower DDTC complex stability in comparison with Pb-DDTC, was eliminated without need for any masking reagent. With 120 s of preconcentration time at a sample flow rate of 7.6 mL min−1, an enhancement factor of 110 and a detection limit (3 s) of 0.2 μg L−1 were obtained. The precision (RSD, n = 10) was 3.1% at the 10 μg L−1 level. The developed method was successfully applied to trace silver determination in a variety of environmental water samples and certified reference material.     

Using ratiometric indicator-displacement assays in semi-quantitative colorimetric determination of chloride, bromide, and iodide anions

A ratiometric indicator-displacement assay (RIDA) array has been developed for the semi-quantitative colorimetric determination of chloride, bromide, and iodide anions. Determinations of these halide anions follow the displacement reaction using the chelate compound of (2-(3,5-dibromo-2-pyridylazo)-5-(diethylamino)phenol) (3,5-Br2-PADAP) and heavy metal salts as colorimetric reagent. Different from regular silver nitrate titrations, the chloride, bromide, and iodide anions compete with the 3,5-Br2-PADAP ligand and change the colour of the 3,5-Br2-PADAP-metal chelate compound dramatically. These clearer colour changes make the semi-quantitative colorimetric determination of chloride, bromide, and iodide anions possible. The colour changes are imaged using a conventional flatbed scanner, and digitized. After statistical analysis, these colour changes in the RIDA array provide facile identification of chloride, bromide, and iodide anions at a wide concentration range (10 μM to 10 mM) without any misclassification. The RIDA array is able to discriminate without misclassifications among seven concentrations of chloride, bromide, and iodide anions. No shelf life issue exists because the chelating compounds react with halide anions directly without any pre-immobilizations.     

Capillary electrophoresis with laser induced-fluorescence detection of profens derivatized with the water-soluble fluorogenic reagent 4-N-(4-N'-aminoethyl)piperazino-7-nitro-2,1,3-benzoxadiazole

Profens, including pranoprofen, fenoprofen, flurbiprofen, ketoprofen and ibuprofen (Ib), were derivatized by a water-soluble benzofurazan fluorescent reagent, 4-N-(4-N'-aminoethyl)piperazino-7-nitro-2,1,3-benzoxadiazole and then were run on capillary electrophoresis in a NH4Ac-HAc buffer of pH 3.1 containing 2.4 mM beta-cyclodextrin. At room temperature, the derivatization reaction was catalyzed by triphenyl phosphine and diphenyl disulfide in acetonitrile medium, and the derivatives fluoresce around 530 nm when excited at 488 nm. With the CE running on a 50 cm x 50 microm I.D. length fused-silica capillary of by using Ar+ laser induced-fluorescence detection, the detection limits attained were in the range of 0.16 to 0.3 fmol.     

萃取富集-火焰原子吸收光谱法测定食品中痕量银

建立了萃取富集-火焰原子吸收法测定食品中痕量银的新方法.在硫氰酸钾、十六烷基三甲基溴化铵和氯化钠溶液体系中,银离子能被定量萃取到乙酸乙酯中,从而起到富集作用,取乙酸乙酯于火焰原子吸收光谱仪测定其中的银元素含量,提高了测定灵敏度和选择性.结果显示:银在0-200ng/mL内线性良好,r=0.999 3,测定银的灵敏度(特...     

Quantitative analysis of D-24851, a novel anticancer agent, in human plasma and urine by liquid chromatography coupled with tandem mass spectrometry

The development of a liquid chromatography/tandem mass spectrometric assay for the quantitative analysis of the novel tubulin inhibitor D-24851 in human plasma and urine is described. D-24851 and the deuterated internal standard were extracted from 250 microL of plasma or urine using hexane/ether (1:1, v/v). Subsequently, 10-microL aliquots of reconstituted extracts were injected onto an Inertsil ODS analytical column (50 x 2.0 mm i.d., 5 microm particle size). An eluent consisting of methanol/5 mM ammonium acetate, 0.004% formic acid in water (80:20, v/v) was pumped at a flow rate of 0.2 mL/min. An API 365 triple quadrupole mass spectrometer was used in the multiple reaction monitoring mode for sensitive detection. For human plasma a dynamic range of 1-1000 ng/mL was validated, and for human urine a range of 0.25-50 ng/mL. Validation was performed according to the most recent FDA guidelines and all results were within requirements. The assay has been successfully applied to support a phase I clinical trial with orally administered D-24851.     

FI automatic method for the determination of copper(II) based on coproporphyrin I-Cu(II)/TCPO/H(2)O(2) chemiluminescence reaction for the screening of waters

In this paper, an automatic method for the screening of water samples containing Cu(II) was proposed, based on peryoxalate chemiluminescence reaction using coproporphyrin I as fluorophor compound to provide selectivity and a simple flow injection (FI) chemiluminescence detector (CLD). FI system conditions were chosen in order to distinguish samples over or under legislation limit established (50 μg l⁻¹) with high reliability. The detection limit found was 9 μg l⁻¹ and the linear dynamic range was 15-125 μg l⁻¹ of Cu(II). Repeatibility and reproducibility studies gave good precision and accuracy with recovery near 100%. Under these conditions, the method resulted selective and only Fe(II), Fe(III) and Pb(II) could interfere, but at a concentration level higher than their normal concentration in waters. The proposed method was found to be highly reliable for screening purposes and it was successfully applied to the screening of a variety of real water samples.     

Determination of Utratrace Silver Using Surfactant As Sensitizer by Catalytic Near Field Laser Thermal Lens Spectrometry

Thermal lens spectrometry (TLS) is an excellent tool for trace analysis1. TLS allows the detection of absorbances of 10-7～10-8, concentration of ≈ 10-11 mol稬-1 and the analysis of 10-15 L volumes with ≈10-2 absorbing molecules2. Kinetic analysis is playing an increasingly important part in modern analytical chemistry. Therefore, TLS shows much promise in combination with kinetic analysis. However, there are few data on TLS applications in kinetic analysis method so far3～4. A ne…     

Combination of flow injection with capillary electrophoresis: 8. Miniaturized capillary electrophoresis system with flow injection sample introduction and electrogenerated chemiluminescence detection

The combined flow injection (FI)-capillary electrophoresis (CE) system was further exploited by coupling to an electrogenerated chemiluminescence (ECL) detection system. A low-cost miniaturized CE system was developed on a chip platform to provide easy interface both with FI sample introduction and with ECL detection. A falling-drop interface was employed to perform FI split-flow sample introduction while achieving electrical isolation from the CE high voltage. A plexiglas reservoir at the capillary outlet served as both the reaction and detection cell for the ECL reaction, with Ru(bpy)₃²⁺ reagent continuously flowing through the cell. An optical fiber was positioned within the reservoir close to the capillary outlet for transferring the ECL emission to the PMT. The relative positions of the capillary outlet, working electrode and optical fiber as well as reagent renewal flow-rate were optimized to achieve both good sensitivity and separation efficiency under non-interrupted sampling conditions, involving large numbers of samples. An on-column joint often used in other works for isolating the ECL detection system from the CE separation voltage was not found necessary. The performance of the system was illustrated by the baseline separation of proline, valine and phenylalanine with a high throughput of 50 h⁻¹ and plate height of 14 μm for proline under 147 V cm⁻¹ field strength. Detection limits (3σ) were 1.2, 50 and 25 μM and peak height precisions were 1.4, 5.4 and 4.3% R.S.D. (n=9) for proline, valine and phenylalanine, respectively.     

Determination of Ultratrace Silver Using Surfactant as Sensitizer by Catalytic Near Field Laser Thermal Lens Spectrometry

Introduction Thermal lens spectrometry (TLS) is an excellent method for trace analysis.1-3 Methods classified as TLS are based upon a thermal change in the optical proper-ties of a sample on the absorption of laser energy which leads to a temperature rise in the sample and conse-quently to the formation of an inhomogeneous spatial profile of the refractive index. The change in the diver-gence of a laser beam on the resulting optical element (thermal lens) is proportional to the amount of abs…     

Minimization of Interferences in Flow Injection Amperometric Glucose Biosensor Based on Oxidation of Enzymatically‐produced H2O2

One of the major problems in amperometric biosensors based on detection of H₂O₂ produced by enzymatic reaction between oxidase enzymes and substrate is the interference of redox active compounds such as ascorbic acid (AA), dopamine (DA) and uric acid (UA). To minimize these interferences, sodium bismuthate was used for the first time as an insoluble pre‐oxidant in the flow injection (FI) amperometric glucose biosensor at a Glucose oxidase (GOx) immobilized Pt/Pd bimetallic modified pre‐anodized pencil graphite electrode (p.PGE). In this context, these interfering compounds were injected into a flow injection analysis (FIA) system using an injector which was filled with NaBiO₃. Thus, these interferents were converted into their redox inactive oxidized forms before reaching the electrode in the flow cell. While glucose was not influenced by the pre‐oxidant in the injector, the huge oxidation peak currents of the interferents decreased significantly in the biosensor. FI amperometric current time curves showed that the AA, DA and UA were minimized by 96 %, 86 %, and 98 % respectively, in the presence of an equivalent concentration of interferences in a 1.0 mM glucose solution. The proposed FI amperometric glucose biosensor exhibits a wide linear range (0.01–10 mM, R²=0.9994) with a detection limit of 2.4×10^?3 mM. Glucose levels in the artificial serum and two real samples were successfully determined using the fabricated FI amperometric biosensor.     

Steady-state and flow-injection response of a metallic silver electrode for potentiometric detection of metal cyanide complex formartion

A metallic silver electrode provides a potentiometric response to Ag(I), Hg(II), Fe(III), Cu(II), Zn(II), Co(II) and Ni(II) ions, and large changes in the electrode potential of up to 400 mV are observed when these ions are injected into a 0.29 mM soulution of cyanide ion. Injection 10-μl aliquots into a reagent stream with a cyanide concentration of 0.1 mM is shown to give the expected sigmoidal-shaped response curve for peak height as a function of metal ion concentration. Sub-nanomole quantities of metal ions are detectable with a peak height of ca. 20 mV, depending on the cyanide concentration.     

Sensitive detection of glucose based on gold nanoparticles assisted silver mirror reaction

We developed a simple, non-enzymatic approach for the colorimetric detection of glucose based on a gold nanoparticles (Au NPs) assisted silver mirror reaction (AuSMR). The linear range of the concentration of glucose is from 0.04 mM to 1 mM, and the lowest concentration that can be distinguished by the naked eye is 10 nM. This approach has been successfully used for detecting glucose in serum.