Resolution of benzo[a]pyrene in complex mixtures of other polycyclic aromatic hydrocarbons. Comparison of two spectrofluorimetric methods applied to water samples

Two spectrofluorimetric methods, second-derivative constant-energy synchronous luminescence (SDCESL) and constant-wavelength synchronous luminescence (CWSL) in combination with multiple linear regression (MLR), for the quantification of benzo[a]pyrene (BaP) at sub-ng mL-1 levels, in the presence of benzo[b]fluoranthene (BbFt), benzo[k]fluoranthene (BkFt), benzo[ghi]perylene (BghiP) and indeno[1,2,3-cd]pyrene (IP), were developed and compared in detail. SDCESL presents lower limits of detection and quantification than CWSL/MLR and also gives more exact and precise results for levels close to the quantification limit. For BaP, SDCESL achieved quantification limits of 0.019 ng mL-1 in river waters and 0.007 ng mL-1 in drinking waters. This work offers a sensitive, precise, accurate, rapid, simple and economic methodology for monitoring BaP in waters for public consumption, meeting all the requirements of the EC Directive 98/83/CE that fixes the maximum admissible limit for this polycyclic aromatic hydrocarbon in drinking waters at of 0.010 ng mL-1.     

Chelating 2-mercaptobenzothiazole loaded resin. Application to the separation of inorganic and alkylmercury species for their atomic absorption spectrometry determination in natural waters

A new 2-mercaptobenzothiazole loaded Bio-Beads SM-7 resin has been prepared and its analytical properties were established. The sorbent was applied to the separation and preconcentration of inorganic and alkylmercury from natural waters. Optimum conditions of separation as pH, flow rate on column, volume of samples and desorbing agent were established. The cold vapour atomic absorption method determination of both forms of mercury after their successive reduction by tin(II) was used. The low limit of determination for this method was established as 10 ng l(-1) for 1.0 l water sample. Accuracy and precision of the method was estimated by using test water standards and samples of natural water spiked with known amounts of mercury species.     

Determination of trace concentrations of hexavalent chromium

A simple and sensitive solvent extraction-atomic spectrometric technique has been developed for the determination of hexavalent chromium in fresh and saline waters. The technique is based on the reaction of chromium with diphenylcarbazide. The method has been tested on a variety of water samples over an analytical range of 0-2 microg l(-1). A limit of detection of 0.024 microg l(-1) was achieved. Spiking recoveries in the range 87-115% were achieved in river water, drinking water and marine waters.     

Determination of bromide ion in raw and drinking waters by capillary zone electrophoresis.

A new capillary zone electrophoretic method was developed for the determination of bromide ion in raw and drinking waters. An NaCl-based low-pH buffer caused a reduction of electroosmotic flow (EOF) in the buffer zone, whereas injected water sample resulted in higher EOF in the sample zone thus pumping out the neutral water plug. Sample stacking was used for the preconcentration. The method was applicable for waters from low to intermediate ionic strengths, i.e., the concentration of chloride should preferably be less than 40 mg/l. The method had a limit of detection of 15 micrograms/l at a signal-to-noise ratio of three (S/N = 3) and a limit of quantitation of 20 micrograms/l. CZE results obtained with real samples were compared with ion chromatography--inductively coupled mass spectrometric results.     

钙镁试剂-示波计时电位法测定天然水和饮用水中铝含量

本文报道钙镁试剂 ( CLG) -示波计时电位法直接测定天然水和饮用水中的铝含量。在 0 .2 mol/L 乙酸 -乙酸铵 ( p H=6.3)缓冲溶液中 ,加入铝后 ,铝 - CL G配合物切口电位为 - 0 .75V,切口深度在 5× 1 0 - 6～ 5× 1 0 - 5mol/L范围内呈线性关系 ,检测下限为 4× 1 0 - 6 mol/L。在 5× 1 0 - 5mol/L时相对标准偏差为 4.7% ( n=1 0 )。应用该法测定了天然水和饮用水中铝含量 ,并同 ICP/AES法所获结果进行了对照 ,结果基本一致     

Improved method for the determination of trace perchlorate in ground and drinking waters by ion chromatography

Ammonium perchlorate, a key ingredient in solid rocket propellants, has been found in ground and surface waters in a number of U.S. states, and perchlorate contamination of public drinking water wells is now a serious problem in California. Perchlorate poses a health risk and preliminary data from the U.S. EPA reports that exposure to less than 4-18 microg/l provides adequate human health protection. An improved ion chromatographic method was developed for the determination of low microg/l levels of perchlorate in ground and drinking waters based on a Dionex IonPac AS16 column, an hydroxide eluent generated using an EG40 automated eluent generator, large loop (1000 microl) injection, and suppressed conductivity detection. The method is free of interferences from common inorganic anions, linear over the range of 2-100 microg/l perchlorate, and quantitative recoveries are obtained for low microg/l levels of perchlorate in spiked ground and drinking water samples. The MDL of 150 ng/l permits quantification of perchlorate below the levels that ensure adequate health protection.     

Flow-through fluorescence-based optosensor for the screening of zinc in drinking water.

A single and rapid solid surface fluorescence-based flow-through optosensor has been developed for the screening of trace amounts of Zn(II) in drinking water samples. The proposed method is based on the transient immobilization of the target species: the complex formed between Zn(II) and the fluorogenic reagent p-(tosylamino)quinoline (p-TAQ) on an appropriate solid support (C(18) silica gel). The fluorescence of the complex was continuously monitored at an emission wavelength of 495 nm upon excitation at 377 nm. The instrumental, chemical and flow-injection variables were carefully investigated and optimized. The sensor was calibrated over the range of 5 - 125 ng mL(-1), obtaining a limit of detection of 0.9 ng mL(-1), a RSD of 1.8%, with a sampling frequency of 20 h(-1). The proposed method was successfully applied to different drinking water samples with recoveries between 98 and 104%.     

Quantification of phenylurea herbicides and their free and humic acid-associated metabolites in natural waters.

There is increasing interest in and demand for simultaneously monitoring pesticides as well as related degradation products (DPs) in natural waters, as the latter compounds can be even more toxic than the former ones. A method for determining parts per trillion levels of phenylurea herbicides and their DPs, that is their dealkylated forms and aromatic amines, is described. This method is based on solid-phase extraction with a Carbograph 4 cartridge followed by liquid chromatography (LC) with electrospray (ES) mass spectrometric detection. A study aimed at optimizing the response of the ES-MS detector for very weakly basic chloroanilines was conducted. Results showed that ion signal intensities of the above species were dependent on the composition of the LC mobile phase to an astonishing degree. At concentration levels of a few hundred ng/l, laboratory experiments showed that the aromatic amines considered here were mostly associated to dissolved humic acids (HAs) by both reversible and irreversible bindings. The addition of a reducing agent, i.e., NaBH4, succeeded in liberating that fraction of aromatic amines, which being reversibly bound to quinoidal structures of HAs are bioavailable. Analyte recoveries were better than 85% on extraction from 4 l of drinking water (spike level, 25 ng/l), 2 l of ground water (spike level, 50 ng/l) and 0.5 l of river water (spike level, 200 ng/l). Relative standard deviations ranged between 4.6 and 20% for drinking water, 4.3 and 15% for ground water, 5.9 and 13% for river water. Method detection limits calculated for drinking water, groundwater and surface water were between 3 and 11, 6 and 21, 36 and 75 ng/l, respectively.     

Determination of selected human pharmaceutical compounds in effluent and surface water samples by high-performance liquid chromatography-electrospray tandem mass spectrometry

A simple method is presented for the analysis of 13 pharmaceutical and pharmaceutical metabolite compounds in sewage effluents and surface waters. The pharmaceutical compounds were extracted using a genetic solid-phase extraction (SPE) procedure using Phenomenex Strata X as a stationary phase. Extracts were quantitatively analysed by four separate reversed-phase high-performance liquid chromatography-electrospray tandem mass spectrometry (HPLC-ESI-MS/MS) techniques and quantified by comparison with an internal standard ([13C]-phenacetin). Recoveries and limits of detection (LOD) for sulfamethoxazole (120%, 50 ng l(-1)), acetyl-sulfamethoxazole (56%, 50 ng l(-1)), trimethoprim (123%, 10 ng l(-1)), erythromycin (73%, 10 ng l(-1)), paracetamol (75%, 50 ng l(-1)), ibuprofen (117%, 20 ng l(-1)), clofibric acid (83%, 50 ng l(-1)), mefenamic acid (24%, 50 ng l(-1)), diclofenac (62%, 20 ng l(-1)), propranolol (45%, 10 ng l(-1)), dextropropoxyphene (63%, 20 ng l(-1)) and tamoxifen (42%, 10 ng l(-1)) were all acceptable. The recovery of lofepramine (4%) was too low to be of use in a monitoring programme. Application of the method to samples collected from UK sewage effluents and surface waters showed detectable concentrations of mefenamic acid, diclofenac, propranolol, erythromycin, trimethoprim and acetyl-sulfamethoxazole in both matrices. Ibuprofen and dextropropoxyphene were detected in sewage effluents alone. All other pharmaceutical compounds were below the methods limits of detection.     

Determination of trace level perchlorate in drinking water and ground water by ion chromatography

Ammonium perchlorate, a key ingredient in solid rocket propellants, has recently been found in ground and surface waters in the USA in a number of states, including California, Nevada, Utah, and West Virginia. Perchlorate poses a health risk and preliminary data from the US Environmental Protection Agency reports that exposure to less than 4–18 μg/l provides adequate human health protection. An ion chromatographic method was developed for the determination of low μg/l levels of perchlorate in drinking and ground waters based on a Dionex IonPac AS11 column, a 100 mM hydroxide eluent, large loop (1000 μl) injection, and suppressed conductivity detection. The method is free of interferences from common anions, linear in the range of 2.5–100 μg/l, and quantitative recoveries were obtained for low μg/l levels of perchlorate in spiked drinking and ground water samples. The method detection limit of 0.3 μg/l permits quantification of perchlorate below the levels which ensure adequate health protection. A new polarizable anion analysis column, the IonPac AS16, and its potential applicability for this analysis is also discussed.     

Simultaneous determination of "earthy-musty" odorous haloanisoles and their corresponding halophenols in water samples using solid-phase microextraction coupled to gas chromatography with electron-capture detection

Certain haloanisoles present at trace levels cause a large part of earthy-musty off-flavor problems in drinking water. These potent odorous chemicals come mainly through biomethylation of their corresponding halopenols. To enable the investigation of both families of compounds, a method involving solid-phase microextraction (SPME) was developed and the main parameters governing SPME were optimized. This method allows the simultaneous quantification of haloanisoles and halophenols at levels ranging from 1 to 100 or 250 ng/l, with detection limits of about 0.5 ng/l and could be applied to potable as well as raw surface waters.     

Multiresidue method for the simultaneous determination of four groups of pesticides in ground and drinking waters,using solid-phase microextraction-gas chromatography with electron-capture and thermionic specific detection

A common sample preparation procedure capable of efficiently concentrating various groups of pesticides, taking advantage of universal detectors like the mass spectrometer or combined techniques of group selective detectors like gas chromatography-electron capture detection (ECD)/thermionic specific detection (TSD), is desirable in environmental analysis. Six solid-phase microextraction fibres available for analysis of semi-volatiles (7, 30 and 100 microm poly(dimethylsiloxane) (PDMS), 85 microm polyacrylate, 60 microm PDMS-divinylbenzene (PDMS-DVB) and 65 microm Carbowax-DVB) were evaluated and the 60 microm PDMS-DVB was selected for the simultaneous extraction of 34 compounds, included in the organochlorine (OCPs), organophosphorous (OPPs), pyrethroid and triazine pesticide groups. All parameters affecting the extraction efficiency from water samples, namely fibre coating, sample agitation, pH and ionic strength, extraction temperature and time, were optimised. The analytical procedure involves solid-phase microextraction extraction, gas chromatographic separation and subsequent ECD and TSD via a post-column splitter adjusted to a split ratio of 1:10, respectively. Detection limits in the range of 1-10 ng l(-1) for OCPs, 1-30 ng l(-1) for OPPs, 20-30 ng l(-1) for pyrethroids and 8-50 ng l(-1) for triazines are easily attainable with the optimised procedure. The method validated for ground and drinking waters has low cost of implementation and operation although it requires careful maintenance.     

Simultaneous quantification of neutral and acidic pharmaceuticals and pesticides at the low-ng/l level in surface and waste water

A new analytical method is presented that allows simultaneous determination of neutral and acidic pharmaceuticals and pesticides in natural waters. The compounds investigated include frequently used pharmaceuticals, i.e., the anti-epileptic carbamazepine, four analgesic/anti-flammatory drugs (ibuprofen, diclofenac, ketoprofen and naproxen) and the lipid regulator clofibric acid and important pesticides including triazines, acetamides and phenoxy acids. Sample enrichment was achieved in one step with a newly developed solid-phase extraction procedure using the Waters Oasis HLB sorbent. The neutral compounds were analyzed by GC-MS in a first step, and then the acidic compounds after derivatization with diazomethane. Relative recoveries using isotope labeled internal standards were between 71 and 118% and the detection limits were in the range of 1 to 10 ng/l in drinking water, surface water and waste water treatment plant effluents (precision: 1-15%). The developed analytical method proved to be very durable during a 3-month field study and the target analytes were detected in concentrations of 5-3,500 ng/l in waste water treatment plant effluents, river water and lake water.     

Determination of zinc by flow injection with fluorimetric detection in a micellar medium

A room-temperature flow injection spectrofluorimetric method is presented for the determination of Zn(II), based on the use of salicylaldehyde thiocarbohydrazone in the presence of Triton X-100 and sodium acetate-acetic acid buffer. Various physical and chemical variables affecting the reaction in the flow system were evaluated. The proposed method is very selective. The calibration graph is linear over the range 10-1000 ng/ml, with a detection limit of 5 ng/ml and a relative standard deviation at the 50 ng/ml level of 1.8 %. The method was successfully applied to the determination of Zn(II) in drinking waters and biological samples.     

On-line ion-pair solid-phase extraction-liquid chromatography-mass spectrometry for the analysis of quaternary ammonium herbicides

An ion-pair on-line solid-phase extraction procedure using C8 extraction disks, suitable for liquid chromatography-mass spectrometry analysis is developed to determine quaternary ammonium herbicides (quats) in water samples. The separation of these compounds was performed using ion-pair chromatography with heptafluorobutyric acid (15 mM, pH 3.3) and acetonitrile gradient elution. Detection was carried out using a quadrupole mass spectrometer. Water sample volumes up to 50 ml can be preconcentrated with recoveries higher than 70%. Good precision and accuracy (day-to-day and run-to-run) were obtained and the detection limits ranged from 6 to 85 ng l(-1). The proposed on-line ion-pair solid-phase method enables compliance with European Community directives for drinking waters (100 ng l(-1)).     

Analytical methodologies for determining the occurrence of endocrine disrupting chemicals in sewage treatment plants and natural waters

In this study, a method for assessing the occurrence of trace amounts of 12 representative estrogenic compounds in sewage and surface waters was developed. The selected substances were the phytoestrogens daidzein, genistein and biochanin A, the alkylphenols bisphenol A and 4-nonylphenol, the natural hormones 17β-estradiol, estrone, estriol and the synthetic hormone 17α-ethynylestradiol and the mycoestrogens zearalenone and two of its metabolites (α-zearalanol and β-zearalanol). The procedure consists in solid phase extraction (SPE) performed with OASIS cartridges followed by liquid chromatography coupled with tandem mass spectrometry (LC-MS-MS). Recoveries were all above 80% for each analyzed aqueous matrices. The developed method was applied to verify the occurrence of endocrine disrupters in environmental samples of sewage influents and effluents of an Italian STP. Phytoestrogens were present in effluents at concentrations ranging from 3 to 83 ng/l, whereas the levels detected for alkylphenols were in the range 13-36 ng/l for bisphenol A and up to 1 μg/l for nonylphenol. Estrogens and zeranols were determined at levels below 30 ng/l. Analysis of a river (Tiber) receiving effluent waters revealed high quantities of bisphenol A (15-29 ng/l) and nonylphenol (up to 1.2 μg/l), whereas the presence of all the other compounds were at levels of few ng/l.     

Analysis of 32 priority substances from EU water framework directive in wastewaters,surface and drinking waters with a fast sample treatment methodology

A simple, fast, and sensitive method is proposed for the analysis of 32 priority substances (PS) from EU Water Framework Directive (WFD) and the first Watch List in effluents of wastewater treatment plants (EWW), surface waters (SW) and drinking waters (DW). Dispersive liquid-liquid microextraction (DLLME) and gas chromatography coupled to tandem mass spectrometry (GC-MS/MS) is used. For DLLME, a mixture of 1,1,2-trichloroethane as extraction solvent (75 µL) and acetonitrile as disperser solvent (3.2 mL) is proposed. The method was validated in EWW, SW and DW, showing satisfactory accuracy values ranging from 90% to 104%, good precision (relative standard deviation, RSD%, lower than 13%) and uncertainty values between 7% and 34%. Regarding sensitivity, method limits of quantification (MLOQs) of 4.8, 5.2 and 8.8 ng L^?1 for DW, SW and EWW, respectively, were obtained. The developed method was applied to analyze PS in water from effluents of waste water treatment plants (WWTPs), surface water of the Llobregat River and its main tributaries (Catalonia, NE Spain) and drinking water from a Drinking Water Treatment Plant (DWTP). Moreover, the efficiency of treatment plants (DWTP, WWTP) on the elimination of PS was evaluated. Only 3 PS (lindane, terbutryn and dicofol) were detected, being terbutryn the compound found at the highest levels (up to 493 ng L^?1 in EWW samples). Regarding environmental quality standard (WFD) for terbutryn in surface waters, only one sample, the Rubí stream (431 ng L^?1), showed levels of terbutryn higher than maximum allowable concentration (340 ng L^?1).     

Solid-phase extraction followed by high-performance liquid chromatography-ionspray interface-mass spectrometry for monitoring of herbicides in environmental water

In this work we developed a sensitive and specific multiresidue method, based on reversed-phase liquid chromatography-mass spectrometry, with an ionspray interface (LC-ISI-MS), for determining 52 of most representative compounds of herbicides in water samples. The procedure used involved passing 0.5 l of surface water, 2 l of ground water and 4 l of drinking water samples, respectively, through a 0.5 g graphitized carbon black (GCB) extraction cartridge. Base-neutral and acid herbicides were differential eluted from GCB cartridge and follow analyzed by HPLC-ISI-MS apparatus. A conventional 4.6-mm-ID reversed-phase LC C18 column, operating with a mobile phase flow-rate of 1 ml/min, was used to chromatograph the analytes. A flow of 100 microl/min of the column effluent was diverted to the ISI source. The study demonstrates the sensitivity of the technique, with detection limit under 10 ng/l in drinking water samples. Performance data for the method such as recovery and precision are also reported.     

Utilization of a benzyl functionalized polymeric ionic liquid for the sensitive determination of polycyclic aromatic hydrocarbons; parabens and alkylphenols in waters using solid-phase microextraction coupled to gas chromatography-flame ionization detection

The functionalized polymeric ionic liquid poly(1-(4-vinylbenzyl)-3-hexadecylimidazolium bis[(trifluoromethyl)sulfonyl]imide (poly(VBHDIm(+)NTf(2)(-))) has been used as successful coating in solid-phase microextraction (SPME) to determine a group of fourteen endocrine disrupting chemicals (ECDs), including polycyclic aromatic hydrocarbons (PAHs), alkylphenols, and parabens, in several water samples. The performance of the PIL fiber in direct immersion mode SPME followed by gas chromatography (GC) with flame-ionization detection (FID) is characterized with average relative recoveries higher than 96.1% from deionized waters and higher than 76.7% from drinking bottled waters, with precision values (RSD) lower than 13% for deionized waters and lower than 14% for drinking bottled waters (spiked level of 1 ng mL(-1)), when using an extraction time of 60 min with 20 mL of aqueous sample. Detection limits varied between 9 ng L(-1) and 7 ng mL(-1). A group of real water samples, including drinking waters, well waters, and swimming pool waters, have been analyzed under the optimized conditions. A comparison has also been carried out with the commercial SPME coatings: polydimethylsyloxane (PDMS) 30 μm, and polyacrylate (PA) 85 μm. The functionalized PIL fiber (～12 μm) demonstrated to be superior to both commercial fibers for the overall group of analytes studied, in spite of its lower coating thickness. A normalized sensitivity parameter is proposed as a qualitative tool to compare among fiber materials, being higher for the poly(VBHDIm(+)NTf(2)(-)) coating. Furthermore, the partition coefficients of the studied analytes to the coating materials have been determined. A quantitative comparison among the partition coefficients also demonstrates the superior extraction capability of the functionalized PIL sorbent coating.     

Atomic fluorescence spectrometric determination of trace amounts of arsenic and antimony in drinking water by continuous hydride generation

A highly sensitive and simple method has been developed for the determination of As(III), total As, Sb(III) and total Sb in drinking water samples by continuous hydride generation and atomic fluorescence spectrometry (HGAFS). For As determination, water samples aspirated in a carrier of 2 mol l(-1) HCl were merged with a reducing NaBH(4) 3%(m/v) solution, with sample and NaBH(4) flow rates of 12.5 and 1.5 ml min(-1) respectively. The hydride generated in a 170 cm reaction coil was transported to the detector with an Ar flow of 400 ml min(-1), and a limit of detection between 5 and 20 ng l(-1) was obtained. For Sb determination, 2.5 mol l(-1) HCl and 2%(m/v) NaBH(4) were employed, with respective flow rates of 9.7 and 2 ml min(-1). The hydride generated in a 50 cm reaction coil was transported to the detector with an Ar flow rate of 300 ml min(-1), and a limit of detection between 6 and 14 ng l(-1) was obtained. Determination of the total concentration of these elements was obtained after a previous reduction with KI. Recovery studies of different added concentrations of these species in natural water samples were between 93 and 104% for As(III), 96-103% for As(V), 93-101% for Sb(III) and 90-119% for Sb(V).