Flow-injection photometric determination of sub-nanogram amounts of cobalt by its catalysis of the oxidative coupling of 3-methyl-2-benzothiazolinone hydrazone with N,N-dimethylaniline in a micellar medium

A catalytic flow-injection photometric method was developed for the determination of levels of cobalt as low as 10(-10) mol 1(-1). The method is based on the catalytic action of cobalt(II) on the oxidative coupling of 3-methyl-2-benzothiazolinone hydrazone with N,N-dimethylaniline to form a colored dye (lambda(max) = 590 nm) in the presence of hydrogen peroxide. The extremely activating effect was obtained in the presence of 1,2-dihydroxybenzene-3,5-disulfonate (Tiron) and sodium hydrogencarbonate as activators. Furthermore, the sensitivity of the method was enhanced by adding sodium dodecylsulfate as a surfactant. Linear calibration graphs were obtained over the range 0.04-0.2 ng ml(-1) and 0.1-0.5 ng ml(-1) cobalt(II). respectively, at a sampling rate of 30 per hour. The detection limit (signal/noise = 3) was 5 pg ml(-1) and the relative standard deviations for 0.1 and 0.04 ng ml(-1) cobalt (n = 10) were 1.0 and 2.3%, respectively. The method was applied to the determination of cobalt in pepperbush.     

Catalytic flow-injection determination of copper at nanogram levels by using color formation of N-phenyl-p-phenylenediamine with m-phenylenediamine in the presence of pyridine and ammonia as activators

A spectrophotometric flow-injection method for determining copper(II) has been developed. It is based on the catalytic effect of copper(II) on the oxidative coupling of N-phenyl-p-phenylenediamine with m-phenylenediamine in the presence of hydrogen peroxide. Pyridine and ammonia as activators increased the absorbance for the copper(II)-catalyzed coloration, and the dye formed was stabilized by adding a non-ionic surfactant. The working range of the method was 0.1-2.0 ng ml(-1) of cooper(II) with a relative standard deviation 2.4% at a sampling rate of 30 h(-1). Interference from iron(III) was effectively suppressed by citric acid. Copper in natural water samples can be determined easily.     

Flow-injection spectrophotometric determination of arylamines and sulphonamides by diazotization and coupling in a micellar medium

In a sodium dodecyl sulphate (SDS) micellar solution, the rate of coupling of a diazonium ion with N-(1- naphthyl)ethylenediamine (NED) increases greatly, the protonation of the resulting azo dyes takes place at higher pH values and the dyes are more soluble. These favourable features were applied to the development of a simple flow-injection spectrophotometric procedure for the determination of diazotizable substances of pharmaceutical interest. Limits of detection in the range 0.2–0.5 μg ml^?1 (signal-to-noise ratio=3), with relative standard deviation of 0.7–3% (n=3) for 5 μg ml^?1 standards, were obtained.     

Flow-injection spectrophotometric determination of novalgin in pharmaceuticals using micellar medium.

A sensitive flow-injection (FI) procedure with spectrophotometric detection in a micellar medium is proposed for the determination of novalgin. The method is based on the instantaneous formation of a red-orange product (lambda(max) = 510 nm) after the reaction between novalgin and p-dimethylaminocinnamaldehyde (p-DAC) in a dilute acid medium. The sensitivity of this reaction was increased by a factor of 5.6 in the presence of sodium dodecyl sulfate (SDS). Experimental design methodologies were used to optimize the chemical and FI variables. The calibration curve was linear in the range of 1.45 x 10(-6) to 2.90 x 10(-5) mol L(-1) with an excellent correlation coefficient (r = 0.9999). The detection limit was 1.31 x 10(-7) mol L(-1) (n = 20, RSD = 2.0%). No interferences were observed from the common excipients. The results obtained by the proposed method were favorably compared with those given by the iodometric reference method at 95% confidence level.     

Flow-injection and liquid chromatographic determination of aluminum based on its fluorimetric reaction with 8-hydroxyquinoline-5-sulphonic acid in a micellar medium

Aluminum reacts with 8-hydroxyquinoline-5-sulphonic acids (HQS) in cationic micelles of cetyltrimethylammonium bromide (CTAB) to form a strongly fluorescent compound. In the micellar media the formation of the Al—HQS complex is very fast, allowing a useful continuousdetermination of aluminum in flow systems. At pH 6.3, for 2 × 10^-4 M HQS and 2 × 10^-3 M CTAB the detection limit for a luminum by flow injection is 0.1 ng ml^-1. The calibration is linear up to 100 ng ml^-1 and the peak-height precision is 2% at the 10 ng ml^-1 level. Interfences are greatly decreased compared with the batch method. The reaction has also been applied to the post-column detection by ion chromatography of aluminium in fresh and high-salinity wates and for speciation of aluminium in blodd serum after separation of serum proteins by ion-exchange liquid chromatography.     

Flow-injection photometric determination of mercaptans in light oil products with chromatomembrane extraction

A procedure was developed for the flow-injection photometric determination of mercaptans in light oil products. The use of sodium nitroferricyanide as the photometric reagent at 540 nm provides a detection limit of mercaptan sulfur of 0.3 mg/L at a volume of the sample of 3 mL; the analytical range is from 1 to 50 mg/L.     

Flow-injection spectrophotometric determination of trace vanadium based on catalysis of the gallic acid bromate reaction

High sensitivity is obtained by using high concentrations of gallic acid and bromate, although the uncatalyzed reaction is significant. Various reactant concentrations, reaction temperature, pH and residence times can be used to alter the linear calibration ranges and sensitivity for vanadium. With reagent streams of 1.76 M bromate and 0.06 M gallic acid at pH 3.8 (each at 1 ml min^?1), 0.2–20 ng of vanadium (20-μl injections) can be determined at 30°C. Oxidized gallic acid is detected at 380 nm. When the bromate concentration is decreased to 0.5 M and the temperature is 65°C, 0.05–4 ng of vanadium can be determined; the relative standard deviation is ca. 5% for 0.6 ng of vanadium. The toleranes for Al(III), Fe(III), Mo(VI) and iodide are 10 ng, 10 ng, 50 ng and 200 ng, respectively, for the determination of 1 ng of vanadium. About 12 samples can be injected per hour.     

Spectrofluorimetric determination of thiabendazole in a micellar medium

A sensitive, selective Spectrofluorimetric method has been developed for the determination of thiabendazole in a sodium dodecylsulphate micellar medium. The method features a linear determination range of 0.020-15 g and a detection limit of 0.2 ng/ml, with a relative standard deviation of less than 3%. By using a straightforward extraction procedure with ethyl acetate and hydrochloric acid, the method provided average thiabendazole recoveries above 96% from apple, pear and potato samples.     

Flow-injection determination of copper(II) based on its catalysis on the redox reaction of cysteine with iron(III) in the presence of 1,10-phenanthroline

A redox reaction of cysteine with iron(III) proceeds slowly in the presence of 1,10-phenanthroline (phen). However, this reaction is accelerated in the presence of copper(II) as a catalyst, producing an iron(II)-phen complex (lambda(max)=510 nm). A sensitive spectrophotometric flow-injection method is proposed for the determination of copper(II) based on its catalytic action on this redox reaction. The dynamic range was 0.1-10 ng ml(-1) of copper(II) with a relative standard deviation of 1.0% (n=10) for 1.0 ng ml(-1) of copper(II) at a sampling rate of 30 h(-1). The detection limit (S/N=3) is 0.04 ng ml(-1). The proposed method was successfully applied to the determination of copper in river water as a certified reference material.     

Flow-injection photometric determination of manganese(II) based on its catalysis of the periodate oxidation of N,N'-bis(2-hydroxy-3-sulfopropyl)tolidine

A novel flow-injection spectrophotometric method has been developed for the determination of manganese(II) at sub-nanogram/ml levels. The method is based on its catalytic effect on the oxidation of N,N′-bis(2-hydroxy-3-sulfopropyl)tolidine (HSPT) by periodate. The catalytic effect of manganese(II) was enhanced by the presence of 2,2′-bipyridine as an activator. By monitoring the change in absorbance of the oxidation product of HSPT at 670 nm, manganese(II) ranging 0.02-3.0 ng ml⁻¹ could be determined with the relative standard deviations of less than 2%. The interfering ions were effectively suppressed by the addition of 2,2′-iminodiethanol and citric acid. The proposed method is directly applicable to the determination of manganese in lake and river water samples.     

Flow-injection determination of mixtures of amines immobilized in the flow cell of a photometric diode-array detector

A method for the determination of 2,4-dinitrophenylhydrazine and 2- and 4-nitrophenylhydrazine in mixtures based on their different spectral features is proposed. The sample containing the amines is injected into an FIA manifold and passed through the flow cell of a diode-array spectrophotometer where a support (C₁₈ bonded silica) retains the analytes. The amines are concentrated in situ, thereby achieving a determination limit of 5 × 10^?7 M. The carrier (phosphate buffer-methanol) rapidly elutes the retained compounds, so a sampling frequency of 40 h^?1 could be obtained. The resolution of mixtures of these amines can be carried out with acceptable low errors.     

Flow-injection determination of total iron in freshwater samples with neutralisation chemiluminescence

A flow-injection chemiluminescence method has been established for the determination of total iron in freshwater samples. The enhanced chemiluminescence emission was caused by the iron(II) from the neutralisation reaction of hydrochloric acid and sodium hydroxide without the use of any chemiluminescent reagent. The calibration graph was linear in the concentration range of 2.8–560 µg L^?1 (r ² = 0.9983, n = 8), with relative standard deviation (RSD; n = 4) in the range of 0.8–2.6%. The limit of detection (S/N = 3) was 0.56 µg L^?1 with injection throughput of 180 h^?1. The effect of common anions and cations were studied over their environmentally relevant concentrations in freshwaters. The method was successfully applied to determine total iron in freshwater samples. Iron(III) was reduced to iron(II) by using hydroxylammonium chloride. The proposed method was compared with spectrophotometric method and there was no significant difference between the two methods at the 95% confidence level (t-test). Analysis of river water (certified reference material SLRS-4) for iron(II), after reduction of iron(III) with hydroxylammonium chloride, gave good results (2.17 ± 0.22 µM compared with the certificate value of 1.85 ± 0.1 µM).     

Spectrophotometric determination of ascorbic acid with iron(III) and p-carboxyphenylfluorone in a cationic surfactant micellar medium.

A simple and highly sensitive spectrophotometric method for the determination of ascorbic acid (AA) was established by using iron(III) and p-carboxyphenylfluorone (PCPF) in a cationic surfactant micellar medium. The apparent molar absorptivity of the proposed method, which does not require an extraction procedure, was 2.05 x 10(6) dm3 mol-1 cm-1 at 655 nm. Beer's law was obeyed in the concentration range of 0.02-0.12 microgram/cm3 for AA. The procedure was successfully applied to assays of AA in pharmaceutical preparations. It is suggested that the method is based on a coupled redox-complexation reaction in which the first step is the oxidation of AA by iron(III), and the second step includes the formations of the iron(II)-PCPF (1:2) complex and the dehydroascorbic acid-iron(III)-PCPF (1:1:2) complex.     

Flow-injection analysis with the iron-induced perbromate-iodide reaction: spectrophotometric determination of iron

Total iron is determined by a flow-injection spectrophotometric technique. The production of I(-)(3) from the iron(II)- or iron(III)-induced perbromate-iodide reaction is monitored at 353 nm. Calibration graphs are linear from 10 to 100 ng/ml with correlations up to 0.9998 and can be extended up to 10 microg/ml by appropriate adjustment of conditions. The average sampling rate is 30 samples/hr. Detection limits and relative standard deviations compare well with those of other FIA methods.     

Flow-injection determination of nitrites based on their reaction with thiocyanates

A technique for the flow-injection determination of nitrites with spectrophotometric signal detection was developed and studied. Additionally, a combination of the developed technique with the on-line pre-concentration of low concentrations of nitrites in surface and potable waters was investigated. The technique is based on the reaction of nitrites with thiocyanates. The product of the analytical reaction (nitroso-S-thiocyanate) and its adducts with strong acids are stable in aqueous solutions, which is supported by quantum chemical calculations. It is shown that the reaction chosen is attractive for analytical applications, because it is highly selective. A decrease in the detection limit down to 1.5 ng/mL (3s) is achieved by combining FIA with on-line ion-exchange preconcentration. The technique developed is used for monitoring nitrites in natural and waste water. The throughput capacity is 300 samples per hour.Translated from Zhurnal Analiticheskoi Khimii, Vol. 60, No. 3, 2005, pp. 323–330.Original Russian Text Copyright © 2005 by Kuznetsov, Zemyatova, Ermolenko.     

Flow-injection photometric determination of the phenol index of natural waters in the presence of humic acids

Different schemes were considered for extraction preconcentration in the flow-injection determination of a phenol index, the total concentration of phenol and its derivatives that react with 4-aminoantipyrine. Preference was given to the scheme of flow injection analysis with the direct introduction of an extractant into the mixed flow of a sample and a reagent solution followed by phase separation in a chromatomembrane cell. This allowed phenols to be determined in natural and purified waste waters in the concentration range 1.0 to 10.0 µg/L with an RSD 25% and a throughput of 15 samples an hour. The study of the effect of humic acids on the results of determining the phenol index of natural waters showed that humic acids were hydrolyzed to form compounds that made their own contributions to the phenol index which were difficult to take into account.Translated from Zhurnal Analiticheskoi Khimii, Vol. 60, No. 1, 2005, pp. 79–84.Original Russian Text Copyright © 2005 by A. Moskvin, Mozzhukhin, Mukhina, L. Moskvin.     

Flow-injection/pervaporation coupling for the determination of sulphide in Kraft liquors

A dynamic manifold has been coupled with a pervaporation module for the determination of sulphide ion in complex matrices such as Kraft liquors. The method is based on ethylene blue formation and features detection limits of 0.68 and 0.42 gmL^-1 of S^2- for injection and continuous introduction of the sample, respectively, with linear ranges of 1–15 and 1–10 gmL^-1. The method is highly selective as the interferences from other sulphur species are avoided in the pervaporation process; thus, it has been applied successfully to the determination of the analyte in white and green bleaching liquors.     

Flow-injection/pervaporation coupling for the determination of sulphide in Kraft liquors

A dynamic manifold has been coupled with a pervaporation module for the determination of sulphide ion in complex matrices such as Kraft liquors. The method is based on ethylene blue formation and features detection limits of 0.68 and 0.42 microg mL(-1) of S(2-) for injection and continuous introduction of the sample, respectively, with linear ranges of 1-15 and 1-10 microg mL(-1). The method is highly selective as the interferences from other sulphur species are avoided in the pervaporation process; thus, it has been applied successfully to the determination of the analyte in white and green bleaching liquors.     

原位自动光度滴定法测定铁矿中铁含量

利用自动电位滴定仪和DP5光度电极研究了原位自动光度滴定法在全铁测量中的应用。以HNO3、HCl和HF溶液为溶剂,采用密封微波消解系统分解试样。用NaOH溶液调节溶液酸度至pH 1.5,在原消解罐中以乙二胺四乙酸二钠盐(磺基水杨酸为指示剂)滴定铁。主要对滴定温度、试样的分解条件以及杂质对测定的干扰情况进行了研究。研究结果表明,称样量为0.05 g,溶剂为60%王水10 mL加1 mL HF(1+99),温度为210℃,消解时间为20 min时溶样效果最好,50～60℃条件下,pH 1.5时进行滴定,结果准确可靠,能有效消除干扰。