Kinetics of manganese(III) acetate in acetic acid: generation of Mn(III) with Co(III), Ce(IV), and dibromide radicals; reactions of Mn(III) with Mn(II), Co(II), hydrogen bromide,and alkali bromides

The reaction of cobalt(III) acetate with excess manganese(II) acetate in acetic acid occurs in two stages, since the two forms Co(IIIc) and Co(IIIs) are not rapidly equilibrated and thus react independently. The rate constants at 24.5 degrees C are kc = 37.1 +/- 0.6 L mol-1 s-1 and ks = 6.8 +/- 0.2 L mol-1 s-1 at 24.5 degrees C in glacial acetic acid. The Mn(III) produced forms a dinuclear complex with the excess of Mn(II). This was studied independently and is characterized by the rate constant (3.43 +/- 0.01) x 10(2) L mol-1 s-1 at 24.5 degrees C. A similar interaction between Mn(III) and Co(II) is substantially slower, with k = (3.73 +/- 0.05) x 10(-1) L mol-1 s-1 at 24.5 degrees C. Mn(II) is also oxidized by Ce(IV), according to the rate law -d[Ce(IV)]/dt = k[Mn(II)]2[Ce(IV)], where k = (6.0 +/- 0.2) x 10(4) L2 mol-2 s-1. The reaction between Mn(II) and HBr2., believed to be involved in the mechanism by which Mn(III) oxidizes HBr, was studied by laser photolysis; the rate constant is (1.48 +/- 0.04) x 10(8) L mol-1 s-1 at approximately 23 degrees C in HOAc. Oxidation of Co(II) by HBr2. has the rate constant (3.0 +/- 0.1) x 10(7) L mol-1 s-1. The oxidation of HBr by Mn(III) is second order with respect to [HBr]; k = (4.10 +/- 0.08) x 10(5) L2 mol-2 s-1 at 4.5 degrees C in 10% aqueous HOAc. Similar reactions with alkali metal bromides were studied; their rate constants are 17-23 times smaller. This noncomplementary reaction is believed to follow that rate law so that HBr2. and not Br. (higher in Gibbs energy by 0.3 V) can serve as the intermediate. The analysis of the reaction steps then requires that the oxidation of HBr2. to Br2 by Mn(III) be diffusion controlled, which is consistent with the driving force and seemingly minor reorganization.     

Studies on the behaviour of beta-ethylthioethylenethioglycollate in aqueous Ni(II) and Cu(II) solutions

The stability constants of the 1:1 and 1:2 complexes of nickel and copper(II) with beta-ethylthioethylenethioglycollic acid have been determined at 25 degrees at ionic strength 1.0 (NaClO(4)). The values for the nickel complexes are K(1) = 1.11 +/- 0.06 x 10(2) (spectrophotometrically) or 1.25 +/- 0.11 x 10(2) (potentiometrically) and K(2) = 3.04 +/- 0.24 x 10(2) (potentiometrically). The corresponding values for the copper complexes are K(1) = 1.27 +/- 0.02 x 10(3) or 1.28 +/- 0.03 x 10(3) and K(2) = 7.29 +/- 0.30 x 10(2).     

Kinetic and equilibria studies of the aquation of the trinuclear platinum phase II anticancer agent [(trans-PtCl(NH(3))(2))(2)(mu-trans-Pt(NH(3))(2)(NH(2)(CH(2))(6)NH(2))(2))](4+) (BBR3464)

The hydrolysis profile of the bifunctional trinuclear phase II clinical agent [(trans-PtCl(NH(3))(2))(2)(mu-trans-Pt(NH(3))(2)(NH(2)(CH(2))(6)NH(2))(2))](4+) (BBR3464, 1) has been examined using [(1)H,(15)N] heteronuclear single quantum coherence (HSQC) 2D NMR spectroscopy. Reported are estimates of the rate and equilibrium constants for the first and second aquation steps, together with the acid dissociation constant (pK(a1) approximately equal to pK(a2) approximately equal to pK(a3)). The equilibrium constants for the aquation determined by NMR at 298 and 310 K (I = 0.1 M, pH 5.3) are similar, pK(1) = pK(2) = 3.35 +/- 0.04 and 3.42 +/- 0.04, respectively. At lower ionic strength (I = 0.015 M, pH 5.3) the values at 288, 293, and 298 K are pK(1) = pK(2) = 3.63 +/- 0.05. This indicates that the equilibrium is not strongly ionic strength or temperature dependent. The aquation and anation rate constants for the two-step aquation model at 298 K in 0.1 M NaClO(4) (pH 5.3) are k(1) = (7.1 +/- 0.2) x 10(-5) s(-1), k(-1) = 0.158 +/- 0.013 M(-1) s(-1), k(2) = (7.1 +/- 1.5) x 10(-5) s(-1), and k(-2) = 0.16 +/- 0.05 M(-1) s(-1). The rate constants in both directions increase 2-fold with an increase in temperature of 5 K, and rate constants increase with a decrease in solution ionic strength. A pK(a) value of 5.62 plus minus 0.04 was determined for the diaqua species [(trans-Pt(NH(3))(2)(OH(2)))(2)(mu-trans-Pt(NH(3))(2)(NH(2)(CH(2))(6)-NH(2))(2))](6+) (3). The speciation profile of 1 under physiological conditions is explored and suggests that the dichloro form predominates. The aquation of 1 in 15 mM phosphate was also examined. No slowing of the initial aquation was observed, but reversible reaction between aquated species and phosphate does occur.     

Solution equilibria between ethylenediamine-N,N'-di-3-propionate and some transition metal(II) ions

Solution equilibria between the ligand ethylenediamine-N,N'-di-3-propionate (eddp(2-)) and copper(II), nickel(II) or cobalt(II) ions were studied by glass electrode pH-metric and spectrophotometric measurements in 0.1 M NaCl ionic medium at 298.0+/-0.2 K. In the concentration limits 1.0相似文献   

Spectrophotometric and electrochemical determination of the formation constants of the complexes Curcumin-Fe(III)-water and Curcumin-Fe(II)-water

The formation of complexes among the Curcumin, Fe(III) and Fe(II) was studied in aqueous media within the 5-11 pH range by means of UV-Vis spectrophotometry and cyclic voltammetry. When the reaction between the Curcumin and the ions present in basic media took place, the resulting spectra of the systems Curcumin-Fe(III) and Curcumin-Fe(II) presented a similar behaviour. The cyclic voltammograms in basic media indicated that a chemical reaction has taken place between the Curcumin and Fe(III) before that of the formation of complexes. Data processing with SQUAD permitted to calculate the formation constants of the complexes Curcumin-Fe(III), corresponding to the species FeCur (lob beta110 = 22.25 +/- 0.03) and FeCur(OH)- (log beta111 = 12.14 +/- 0.03), while for the complexes Curcumin-Fe(II) the corresponding formation constants of the species FeCur- (log beta110 = 9.20 +/- 0.04), FeHCur (log beta111 = 19.76 +/- 0.03), FeH2Cur+ (log beta112 = 28.11 +/- 0.02).     

Structural characterization and formation kinetics of sitting-atop (SAT) complexes of some porphyrins with copper(II) ion in aqueous acetonitrile relevant to porphyrin metalation mechanism. Structures of aquacopper(II) and cu(II)-SAT complexes as determined by XAFS spectroscopy

The formation of the sitting-atop (SAT) complexes of 5,10,15,20-tetraphenylporphyrin (H(2)tpp), 5,10,15,20-tetrakis(4-chlorophenyl)porphyrin (H(2)t(4-Clp)p), 5,10,15,20-tetramesitylporphyrin (H(2)tmp), and 2,3,7,8,12,13,17,18-octaethylporphyrin (H(2)oep) with the Cu(II) ion was spectrophotometrically confirmed in aqueous acetonitrile (AN), and the formation rates were determined as a function of the water concentration (C(W)). The decrease in the conditional first-order rate constants with the increasing C(W) was reproduced by taking into consideration the contribution of [Cu(H(2)O)(an)(5)](2+) in addition to [Cu(an)(6)](2+) to form the Cu(II)-SAT complexes. The second-order rate constants for the reaction of [Cu(an)(6)](2+) and [Cu(H(2)O)(an)(5)](2+) at 298 K were respectively determined as follows: (4.1 +/- 0.2) x 10(5) and (3.6 +/- 0.2) x 10(4) M(-1) s(-1) for H(2)tpp, (1.15 +/- 0.06) x 10(5) M(-1) s(-1) and negligible for H(2)t(4-Clp)p, and (4.8 +/- 0.3) x 10(3) and (1.3 +/- 0.3) x 10(2) M(-1) s(-1) for H(2)tmp. Since the reaction of H(2)oep was too fast to observe the reaction trace due to the dead time of 2 ms for the present stopped-flow technique, the rate constant was estimated to be greater than 1.5 x 10(6) M(-1) s(-1). According to the structure of the Cu(II)-SAT complexes determined by the fluorescent XAFS measurements, two pyrrolenine nitrogens of the meso-substituted porphyrins (H(2)tpp and H(2)tmp) bind to the Cu(II) ion with a Cu-N(pyr) distance of ca. 2.04 A, while those of the beta-pyrrole-substituted porphyrin (H(2)oep) coordinate with the corresponding bond distance of 1.97 A. The shorter distance of H(2)oep is ascribed to the flexibility of the porphyrin ring, and the much greater rate for the formation of the Cu(II)-SAT complex of H(2)oep than those for the meso-substituted porphyrins is interpreted as due to a small energetic loss at the porphyrin deformation step during the formation of the Cu(II)-SAT complex. The overall formation constants, beta(n), of [Cu(H(2)O)(n)()(an)(6)(-)(n)](2+) for the water addition in aqueous AN were spectrophotometrically determined at 298 K as follows: log(beta(1)/M(-1)) = 1.19 +/- 0.18, log(beta(2)/M(-2)) = 1.86 +/- 0.35, and log(beta(3)/M(-3)) = 2.12 +/- 0.57. The structure parameters around the Cu(II) ion in [Cu(H(2)O)(n)(an)(6-n)](2+) were determined using XAFS spectroscopy.     

A photometric study of the complexation reaction between Alizarin complexan and zinc(II), nickel(II), lead(II), cobalt(II) and copper(II)

The complexation reaction between Alizarin complexan ([3-N,N-di(carboxymethyl)aminomethyl]-1,2-dihydroxyanthraquinone; H(4)L) and zinc(II), nickel(II), lead(II), cobalt(II) and copper(II) has been studied by a spectrophotometric method. All these metal ions form 1:1 complexes with HL; 2:1 metal:ligand complex were found only for Pb(II) and Cu(II). The stability constants are (ionic strength I = 0.1, 20 degrees C): Zn(2+) + HL(3-) right harpoon over left harpoon ZnHL(-) log K +/- 3sigma(log K) = 12.19 +/- 0.09 (I = 0.5) Ni(2+) + HL(3-) right harpoon over left harpoon NiHL(-) log K +/- 3sigma(log K) = 12.23 +/- 0.21 Pb(2+) + HL(3-) right harpoon over left harpoon PbHL(-) log K +/- 3sigma(log K) = 11.69 +/- 0.06 PbHL(-) + Pb(2+) right harpoon over left harpoon Pb(2)L + H(+) log K approximately -0.8 Co(2+) + HL(3-) right harpoon over left harpoon CoHL(-) log K 3sigma(log K) = 12.25 + 0.13 Cu(2+) + HL(3-) right harpoon over left harpoon CuHL(-) log K 3sigma(log K) = 14.75 +/- 0.07 Cu(2+) + CuHL(-) right harpoon over left harpoon Cu(2)L + H(+) log K approximately 3.5 The solubility and stability of both the reagent and the complexes and the closenes of the values of the stability constants make this reagent suitable for the photometric detection of several metal ions in the eluate from an ion-exchange column.     

Cationic sigma-phenylplatinum(II) complexes with carboxylic acid functionality: pK(a) determinations and x-ray structures

The preparation and characterization of a novel series of cationic sigma-phenylplatinum(II) complexes of the type trans-[Pt(sigma-C(6)H(5))(L)(2)A]OTf (A = picolinic acid, L = PPh(3) (4) and PMePh(2) (7); A = nicotinic acid, L = PPh(3) (5) and PMePh(2) (8); A = isonicotinic acid, L = PPh(3) (6), PMePh(2) (9), and PEt(3) (10)) are described. The pK(a) value for the carboxylic acid functionality in selected complexes was found to follow the order 7 (pK(a) = 5.23 +/- 0.09) > 8 (4.85 +/- 0.10) > 9 (3.51 +/- 0.08) > 6 (3.26 +/- 0.07) approximately 10 (3.21 +/- 0.08) by means of potentiometric titration experiments in 50% (v/v) EtOH/H(2)O solution at 295 K. The X-ray crystal structures of 9 and 10 were also determined. The asymmetric unit of each of 9 and 10 comprises a univalent complex cation, a triflate anion, and a solvent CH(2)Cl(2) molecule of crystallization. Centrosymmetrically related pairs of complex cations in 9 associate via the familiar carboxylic acid dimer motif, whereas with 10, the carboxylic acid dimer motif is absent. Instead, the carboxylic acid residue forms both donor and acceptor interactions to the triflate anion and CH(2)Cl(2) solvent of crystallization, respectively, to afford a 10-membered ring structure. Possible reasons for the observed differences in the solid-state structures of 9 and 10 are presented.     

Pulse radiolysis studies of the reactions of CO3*- and NO2* with nitrosyl(II)myoglobin and nitrosyl(II)hemoglobin

The reactions of carbonate radical anion [CO3*-, systematic name: trioxidocarbonate*1-] with nitrosyl(II)hemoglobin (HbFe(II)NO) and nitrosyl(II)myoglobin (MbFe(II)NO) were studied by pulse radiolysis in N2O-saturated 0.25 M sodium bicarbonate solutions at pH 10.0 and room temperature. The reactions proceed in two steps: outer-sphere oxidation of the nitrosyliron(II) proteins to their corresponding nitrosyliron(III) forms and subsequent dissociation of NO*. The second-order rate constants measured for the first reaction steps were (4.3 +/- 0.2) x 10(8) and (1.5 +/- 0.3) x 10(8) M(-1) s(-1), for MbFe(II)NO and HbFe(II)NO, respectively. The reactions between nitrogen dioxide and MbFe(II)NO or HbFe(II)NO were studied by pulse radiolysis in N2O-saturated 0.1 M phosphate buffer pH 7.4 containing 5 mM nitrite. Also for the reactions of this oxidant with the nitrosyliron(II) forms of Mb and Hb a two-step reaction was observed: oxidation of the iron was followed by dissociation of NO*. The second-order rate constants measured for the first reaction steps were (2.9 +/- 0.3) x 10(7) and (1.8 +/- 0.3) x 10(7) M(-1) s(-1), for MbFe(II)NO and HbFe(II)NO, respectively. Both radicals appear to be able to oxidize the iron(II) centers of the proteins directly. Only for the reactions with HbFe(II)NO it cannot be excluded that, in a parallel reaction, CO3*- and NO2* first react with amino acid(s) of the globin, which then oxidize the nitrosyliron(II) center.     

Kinetics and Mechanism of the Formation and Acid Dissociation of Cobalt(II), Nickel(II), and Copper(II) Complexes with the Highly Enolized beta-Diketone 3-(N-Acetylamido)pentane-2,4-dione (=Hamac) in Aqueous Solution

The beta-diketone Hamac = 3-(N-acetylamido)pentane-2,4-dione was characterized by potentiometric, spectrophotometric, and kinetic methods. In water, Hamac is very soluble (2.45 M) and strongly enolized, with [enol]/[ketone] = 2.4 +/- 0.1. The pK(a) of Hamac is 7.01 +/- 0.07, and the rate constants for enolization, k(e), and ketonization, k(k), at 298 K are 0.0172 +/- 0.0004 s(-1) and 0.0074 +/- 0.0015 s(-1), respectively. An X-ray structure analysis of the copper(II) complex Cu(amac)(2).toluene (=C(21)H(28)CuN(2)O(6); monoclinic, C2/c; a = 20.434(6), b = 11.674(4), c = 19.278(6) ?; beta = 100.75(1) degrees; Z = 8; R(w) = 0.0596) was carried out. The bidentate anions amac(-) coordinate the copper via the two diketo oxygen atoms to form a slightly distorted planar CuO(4) coordination core. Rapid-scan stopped-flow spectrophotometry was used to study the kinetics of the reaction of divalent metal ions M(2+) (M = Ni,Co,Cu) with Hamac in buffered aqueous solution at variable pH and I = 0.5 M (NaClO(4)) under pseudo-first-order conditions ([M(2+)](0) > [Hamac](0)) to form the mono complex M(amac)(+). For all three metals the reaction is biphasic. The absorbance/time data can be fitted to the sum of two exponentials, which leads to first-order rate constants k(f) (fast initial step) and k(s) (slower second step). The temperature dependence of k(f) and k(s) was measured. It follows from the kinetic data that (i) the keto tautomer of Hamac, HK, does not react with the metal ions M(2+), (ii) the rate constant k(f) increases linearly with [M(2+)](0) according to k(f) = k(0) + k(2)[M(2+)](0), and (iii) the rate constant k(s) does not depend on [M(2+)](0) and describes the enolization of the unreactive keto tautomer HK. The pH dependence of the second-order rate constant k(2) reveals that both the enol tautomer of Hamac, HE, and the enolate, E(-), react with M(2+) in a second-order reaction to form the species M(amac)(+). At 298 K rate constants k(HE) are 18 +/- 6 (Ni), 180 +/- 350 (Co), and (9 +/- 5) x 10(4) (Cu) M(-1) s(-1) and rate constants k(E) are 924 +/- 6 (Ni), (7.4 +/- 0.6) x 10(4) (Co), and (8.4 +/- 0.2) x 10(8) (Cu) M(-1) s(-1). The acid dissociation of the species M(amac)(+) is triphasic. Very rapid protonation (first step) leads to M(Hamac)(2+), which is followed by dissociation of M(Hamac)(2+) and M(amac)(+), respectively (second step). The liberated enol Hamac ketonizes (third step). The mechanistic implications of the metal dependence of rate constants k(HE), k(E), k(-HE), and k(-E) are discussed.     

Mechanistic information from low-temperature rapid-scan and NMR measurements on the protonation and subsequent reductive elimination reaction of a (diimine)platinum(II) dimethyl complex

A detailed kinetic study of the protonation and subsequent reductive elimination reaction of a (diimine)platinum(II) dimethyl complex was undertaken in dichloromethane over the temperature range of -90 to +10 degrees C by stopped-flow techniques. Time-resolved UV-vis monitoring of the reaction allowed the assessment of the effects of acid concentration, coordinating solvent (MeCN) concentration, temperature, and pressure. The second-order rate constant for the protonation step was determined to be 15200 +/- 400 M(-1) s(-1) at -78 degrees C, and the corresponding activation parameters are DeltaH = 15.2 +/- 0.6 kJ mol(-1) and DeltaS = -85 +/- 3 J mol(-1) K(-1), which are in agreement with the addition of a proton that results in the formation of the platinum(IV) hydrido complex. The kinetics of the second, methane-releasing reaction step do not show an acid dependence, and the MeCN concentration also does not significantly affect the reaction rate. The activation parameters for the second reaction step were found to be DeltaH = 75 +/- 1 kJ mol(-1), DeltaS = +38 +/- 5 J mol(-1) K(-1), and DeltaV = +18 +/- 1 cm(3) mol(-1), strongly suggesting a dissociative character of the rate-determining step for the reductive elimination reaction. The spectroscopic and kinetic observations were correlated with NMR data and assisted the elucidation of the underlying reaction mechanism.     

Hydrolysis of gadolinium(III) in light and heavy water

The hydrolysis constants of Gd(3+) and the solubility products of Gd(OH)(3) and Gd(OD)(3) in nitrate solutions at 25 and 70 degrees in H(2)O and D(2)O have been determined because of their importance in nuclear technology. The constants are defined (charges omitted for clarity) as *K(11) = a(GdOH)a(H)/a(Gd), *K(21) = a(Gd(OH)(2))a(2)(H)/a(Gd), *K(SO) = a(Gd)/a(3)(H). The values for the H(2)O system were p*K(11) = 7.87 +/- 0.02, p*K(21) = 15.I6 +/- 0.09, p*K(SO) = -19.32 +/- 0.03 at 25 degrees and p*K(11) = 7.55 +/- 0.03, p*K(21) = 13.04 +/- 0.03, p*K(SO) = -16.16 +/- 0.04 at 70 degrees . For the D(2)O system they were p*K(D)(11) = 8.17 +/- 0.01, p*K(D)(21) = 16.00 +/- 0.09, p*K(D)(SO) = -21.18 +/- 0.04 at 25 degrees and p*K(D)(11) = 7.84 +/- 0.02, p*K(D)(21) = 13.95 +/- 0.02, p*K(D)(SO) = -17.34 +/- 0.04 at 70 degrees . The mean enthalpy changes of the reactions were also calculated.     

Study on the transesterification of methyl aryl phosphorothioates in methanol promoted by Cd(II), Mn(II), and a synthetic Pd(II) complex

Methanol solutions containing Cd(II), Mn(II), and a palladacycle, (dimethanol bis(N,N-dimethylbenzylamine-2C,N)palladium(II) (3), are shown to promote the methanolytic transesterification of O-methyl O-4-nitrophenyl phosphorothioate (2b) at 25 °C with impressive rate accelerations of 10(6)-10(11) over the background methoxide promoted reaction. A detailed mechanistic investigation of the methanolytic cleavage of 2a-d having various leaving group aryl substitutions, and particularly the 4-nitrophenyl derivative (2b), catalyzed by Pd-complex 3 is presented. Plots of k(obs) versus palladacycle [3] demonstrate strong saturation binding to form 2b:3. Numerical fits of the kinetic data to a universal binding equation provide binding constants, K(b), and first order catalytic rate constants for the methanolysis reaction of the 2b:3 complex (k(cat)) which, when corrected for buffer effects, give corrected (k(cat)(corr)) rate constants. A sigmoidal shaped plot of log(k(cat)(corr)) versus (s)(s)pH (in methanol) for the cleavage of 2b displays a broad (s)(s)pH independent region from 5.6 ≤ (s)(s)pH ≤ 10 with a k(minimum) = (1.45 ± 0.24) × 10(-2) s(-1) and a [lyoxide] dependent wing plateauing above a kinetically determined (s)(s)pK(a) of 12.71 ± 0.17 to give a k(maximum) = 7.1 ± 1.7 s(-1). Br?nsted plots were constructed for reaction of 2a-d at (s)(s)pH 8.7 and 14.1, corresponding to reaction in the midpoints of the low and high (s)(s)pH plateaus. The Br?nsted coefficients (β(LG)) are computed as -0.01 ± 0.03 and -0.86 ± 0.004 at low and high (s)(s)pH, respectively. In the low (s)(s)pH plateau, and under conditions of saturating 3, a solvent deuterium kinetic isotope effect of k(H)/k(D) = 1.17 ± 0.08 is observed; activation parameters (ΔH(Pd)(++) = 14.0 ± 0.6 kcal/mol and ΔS(Pd)(++)= -20 ± 2 cal/mol·K) were obtained for the 3-catalyzed cleavage reaction of 2b. Possible mechanisms are discussed for the reactions catalyzed by 3 at low and high sspH. This catalytic system is shown to promote the methanolytic cleavage of O,O-dimethyl phosphorothioate in CD3OD, producing (CD3O)2P═O(S(-)) with a half time for reaction of 34 min.     

NO* release from MbFe(II)NO and HbFe(II)NO after oxidation by peroxynitrite

In this work, we showed that the reaction of peroxynitrite with MbFe(II)NO, in analogy to the corresponding reaction with HbFe(II)NO (Herold, S. Inorg. Chem. 2004, 43, 3783-3785), proceeds in two steps via the formation of MbFe(III)NO, from which NO* dissociates to produce iron(III)myoglobin (Mb = myoglobin; Hb = hemoglobin). The second-order rate constants for the first steps are on the order of 10(4) and 10(3) M(-1) s(-1), for the reaction of peroxynitrite with MbFe(II)NO and HbFe(II)NO, respectively. For both proteins, we found that the values of the second-order rate constants increase with decreasing pH, an observation that suggests that HOONO is the species responsible for oxidation of the iron center. Nevertheless, it cannot be excluded that the pH-dependence arises from different conformations taken up by the proteins at different pH values. In the presence of 1.2 mM CO2, the values of the second-order rate constants are larger, on the order of 10(5) and 10(4) M(-1) s(-1), for the reaction of peroxynitrite with MbFe(II)NO and HbFe(II)NO, respectively. The pH-dependence of the values for the reaction with MbFe(II)NO suggests that ONOOCO2- or the radicals produced from its decay (CO3*-/NO2*) are responsible for the oxidation of MbFe(II)NO to MbFe(III)NO. In the presence of large amounts of nitrite (in the tens and hundreds of millimoles range), we observed a slight acceleration of the rate of oxidation of HbFe(II)NO by peroxynitrite. A catalytic rate constant of 40 +/- 2 M(-1) s(-1) was determined at pH 7.0. Preliminary studies of the reaction between nitrite and HbFe(II)NO showed that this compound also can oxidize the iron center, albeit at a significantly slower rate. At pH 7.0, we obtained an approximate second-order rate constant of 3 x 10(-3) M(-1) s(-1).     

Kinetic and product study of the gas-phase reactions of OH radicals, NO(3) radicals, and O(3) with (C(2)H(5)O)(2)P(S)CH(3) and (C(2)H(5)O)(3)PS

Rate constants for the reactions of OH radicals and NO3 radicals with O,O-diethyl methylphosphonothioate [(C(2)H(5)O)(2)P(S)CH(3); DEMPT] and O,O,O-triethyl phosphorothioate [(C(2)H(5)O)(3)PS; TEPT] have been measured using relative rate methods at atmospheric pressure of air over the temperature range 296-348 K for the OH radical reactions and at 296 +/- 2 K for the NO(3) radical reactions. At 296 +/- 2 K, the rate constants obtained for the OH radical reactions (in units of 10(-11) cm(3) molecule(-1) s(-1)) were 20.4 +/- 0.8 and 7.92 +/- 0.27 for DEMPT and TEPT, respectively, and those for the NO(3) radical reactions (in units of 10(-15) cm(3) molecule(-1) s(-1)) were 2.01 +/- 0.20 and 1.03 +/- 0.10, respectively. Upper limits to the rate constants for the reactions of O(3) with DEMPT and TEPT of <6 x 10(-20) cm(3) molecule(-1) s(-1) were determined in each case. Rate constants for the OH radical reactions, measured relative to k(OH + alpha-pinene) = 1.21 x 10(-11) e(436/T) cm(3) molecule(-1) s(-1), resulted in the Arrhenius expressions k(OH + DEMPT) = 1.08 x 10(-11) e(871+/-25)/T cm(3) molecule(-1) s(-1) and k(OH + TEPT) = 8.21 x 10(-13) e(1353+/-49)/T cm(3) molecule(-1) s(-1) over the temperature range 296-348 K, where the indicated errors are two least-squares standard deviations and do not include the uncertainties in the reference rate constant. Diethyl methylphosphonate was identified and quantified from the OH radical and NO(3) radical reactions with DEMPT, with formation yields of 21 +/- 4%, independent of temperature, from the OH radical reaction and 62 +/- 11% from the NO(3) radical reaction at 296 +/- 2 K. Similarly, triethyl phosphate was identified and quantified from the OH radical and NO(3) radical reactions with TEPT, with formation yields of 56 +/- 9%, independent of temperature, from the OH radical reaction and 78 +/- 15% from the NO(3) radical reaction at 296 +/- 2 K.     

Hydrolysis of uranium(VI) at variable temperatures (10-85 degrees C)

The hydrolysis of uranium(VI) in tetraethylammonium perchlorate (0.10 mol dm(-3) at 25 degrees C) was studied at variable temperatures (10-85 degrees C). The hydrolysis constants (*beta(n,m)) and enthalpy of hydrolysis (Delta H(n,m)) for the reaction mUO(2)(2+) + nH(2)O = (UO(2))(m)(OH)(n)((2m-n))+) + nH(+) were determined by titration potentiometry and calorimetry. The hydrolysis constants, *beta(1,1), *beta(2,2), and *beta(5,3), increased by 2-5 orders of magnitude as the temperature was increased from 10 to 85 degrees C. The enthalpies of hydrolysis, Delta H(2,2) and Delta H(5,3), also varied: Delta H(2,2) became more endothermic while Delta H(5,3) became less endothermic as the temperature was increased. The heat capacities of hydrolysis, Delta C(p(2,2)) and Delta C(p(5,3)), were calculated to be (152 +/- 43) J K(-1) mol(-1) and -(229 +/- 34) J K(-1) mol(-1), respectively. UV/Vis absorption spectra supported the trend that hydrolysis of U(VI) was enhanced at elevated temperatures. Time-resolved laser-induced fluorescence spectroscopy provided additional information on the hydrolyzed species at different temperatures. Approximation approaches to predict the effect of temperature were tested with the data from this study.     

Rate constants and H atom branching ratios of the gas-phase reactions of methylidyne CH(X2Pi) radical with a series of alkanes

The reactions of the CH radical with several alkanes were studied, at room temperature, in a low-pressure fast-flow reactor. CH(X2Pi, v = 0) radicals were obtained from the reaction of CHBr(3) with potassium atoms. The overall rate constants at 300 K are (0.76 +/- 0.20) x 10(-10) [Fleurat-Lessard, P.; Rayez, J. C.; Bergeat, A.; Loison, J. C. Chem. Phys. 2002, 279, 87],1 (1.60 +/- 0.60) x 10(-10)[Galland, N.; Caralp, F.; Hannachi, Y.; Bergeat, A.; Loison, J.-C. J. Phys. Chem. A 2003, 107, 5419],2 (2.20 +/- 0.80) x 10(-10), (2.80 +/- 0.80) x 10(-10), (3.20 +/- 0.80) x 10(-10), (3.30 +/- 0.60) x 10(-10), and (3.60 +/- 0.80) x 10(-10) cm3 molecule(-1) s(-1), (errors refer to +/-2sigma) for methane, ethane, propane, n-butane, n-pentane, neo-pentane, and n-hexane respectively. The experimental overall rate constants correspond to those obtained using a simple classical capture theory. Absolute atomic hydrogen production was determined by V.U.V. resonance fluorescence, with H production from the CH + CH4 reaction being used as a reference. Observed H branching ratios were for CH4, 1.00[Fleurat-Lessard, P.; Rayez, J. C.; Bergeat, A.; Loison, J. C. Chem. Phys. 2002, 279, 87];1 C(2)H(6), 0.22 +/- 0.08 [Galland, N.; Caralp, F.; Hannachi, Y.; Bergeat, A.; Loison, J.-C. J. Phys. Chem. A 2003, 107, 5419];2 C(3)H(8), 0.19 +/- 0.07; C(4)H(10) (n-butane), 0.14 +/- 0.06; C(5)H(12) (n-pentane), 0.52 +/- 0.08; C(5)H(12) (neo-pentane), 0.51 +/- 0.08; C(5)H(12) (iso-pentane), 0.12 +/- 0.06; C(6)H(14) (n-hexane), 0.06 +/- 0.04.     

Potentiometric determination of stability constants of cyanoacetato complexes of cobalt(II), nickel(II), copper(II), zinc(II), cadmium(II) and lead(II)

Stability constants of cyanoacetato complexes of cobalt(II), nickel(II), copper(II), zinc(II), cadmium(II) and lead(II) were determined potentiometrically at 25.0 +/- 0.1 degrees and ionic strength 2M (sodium perchlorate). The stability constants were evaluated by a weighted least-squares method.     

Kinetics and mechanisms of CF3CHFOCH3, CF3CHFOC(O)H, and FC(O)OCH3 reactions with OH radicals

The kinetics and mechanism of oxidation of CF3CHFOCH3 was studied using an 11.5-dm3 environmental reaction chamber. OH radicals were produced by UV photolysis of an O3-H2O-He mixture at an initial pressure of 200 Torr in the chamber. The rate constant of the reaction of CF3CHFOCH3 with OH radicals (k1) was determined to be (1.77 +/- 0.69) x 10(-12) exp[(-720 +/- 110)/T] cm3 molecule(-1)(s-1) by means of a relative rate method at 253-328 K. The mechanism of the reaction was investigated by FT-IR spectroscopy at 298 K. CF3CHFOC(O)H, FC(O)OCH3, and COF2 were determined to be the major products. The branching ratio (k1a/k1b) for the reactions CF3CHFOCH3 + OH --> CF3CHFOCH2* + H2O (k1a) and CF3CHFOCH3 + OH --> CF3CF*OCH3 + H2O (k1b) was estimated to be 4.2:1 at 298 K from the yields of CF3CHFOC(O)H, FC(O)OCH3, and COF2. The rate constants of the reactions of CF3CHFOC(O)H (k2) and FC(O)OCH3 (k3) with OH radicals were determined to be (9.14 +/- 2.78) x 10(-13) exp[(-1190 +/- 90)/T] and (2.10 +/- 0.65) x 10(-13) exp[(-630 +/- 90)/T] cm3 molecule(-1)(s-1), respectively, by means of a relative rate method at 253-328 K. The rate constants at 298 K were as follows: k1 = (1.56 +/- 0.06) x 10-13, k2 = (1.67 +/- 0.05) x 10-14, and k3 = (2.53 +/- 0.07) x 10-14 cm3 molecule(-1)(s-1). The tropospheric lifetimes of CF3CHFOCH3, CF3CHFOC(O)H, and FC(O)OCH3 with respect to reaction with OH radicals were estimated to be 0.29, 3.2, and 1.8 years, respectively.     

Solvent extraction of N-Cyclohexyl-N-Nitrosohydroxylamine (cnha) into some organic solvents and of the Cu(II)-cnha complex into methyl isobutyl ketone

The distribution equilibria of N-cyclohexyl-N-nitrosohydroxylamine (cnha) in the water-chloroform, water-hexane, water-methyl isobutyl ketone (MIBK) and water-isopentyl alcohol systems, and of the Cu(II)-cnha complex in the water-MIBK system have been studied. From the distribution data the dissociation and distribution constants of the reagent have been calculated; their values are pK(a) = 5.55 +/- 0.10; log K(DR) = 2.46 +/- 0.05 (chloroform), 1.76 +/- 0.11 (MIBK), 1.06 +/- 0.07 (hexane) and 1.48 +/- 0.06 (isopentyl alcohol). In the same way the values of the distribution and stability constants of the Cu(II) complex have been obtained; log K(DC) = 3.51; log beta(1) = 7.23 +/- 0.10 and log beta(2) = 12.00 +/- 0.08. For the determination of cnha in the aqueous phase saturated with MIBK, a spectrophotometric method based on the coloured complex formed by the reagent with Fe(III) has been established. Finally, an analytical method for Cu(II) by atomic-absorption spectrometry after its extraction with cnha into MIBK, is proposed. Its detection limit is 4.6 mug l ., its precision +/- 2.1% and its accuracy 97.5%. This method has been applied to the determination of the copper content in the surface water of the Congest River of Catalonia (Spain).