Sorption recovery of metal ions using silica gel modified with salicylaldoxime

Trace metals in water were preconcentrated with silica gel modified with salicylaldoxime and determined by AAS. Optimum conditions for the maximum recovery of metal ions, viz. Cu(II), Ni(II), Co(II), Zn(II) and Fe(III), for both batch and column methods were developed. The efficiency of the adsorbent with respect to different experimental conditions was established.     

Extraction of copper ions using silica gel with chemically modified surface

The applicability of silica gels for the application in solid-phase extraction was tested. Silica was modified with ketoimine groups. Surface characteristics of the modified silica were determined by elemental analysis, NMR spectra of solid phases (²⁹Si CP MAS NMR), analysis of pore size distribution of the silica support, and nitrogen adsorption-desorption. Newly proposed sorbents with ketoimine groups were applied in the preconcentration of trace amounts of the Cu (II) ions from lake water, post-industrial water, and demineralized water unburdened back to the lake. Presented at the 34th International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 21–25 May 2007.     

Adsorption and preconcentration of 2,4-dichlorophenoxyacetic acid on a chemically modified silica gel surface

The herbicide 2,4-dichlorophenoxyacetic acid (2,4-D), chemically anchored to a silica gel surface, was used to adsorb and preconcentrate the same herbicide from aqueous solutions at room temperature. From a series of adsorption isotherms adjusted to a modified Langmuir equation, the maximum number of moles adsorbed was calculated as 4.67 x 10(-5) mol g(-1), with the highest retention capacity at pH 5. This modified silica gel was used in a column for preconcentrating trace levels of 2,4-D. The preconcentrated herbicide can be directly eluted with methanol with a recovery efficiency higher than 97%. The concentration factor was 8.33.     

Extraction of metal ions using chemically modified silica gel: a PIXE analysis

Organic ligand with carboxyhydrazide functional group was immobilised on the surface of silica gel and the metal binding capacity of the ligand-embedded silica was investigated. The functional group was covalently bonded to the silica matrix through a spacer of methylene groups by sequential reactions of silica gel with dibromobutane, malonic ester and hydrazine in different media. Surface area value of the modified silica was determined. The changes in surface area were correlated with the structural change of the silica surface due to chemical modifications. A mixture solution of metal ions [K(I),Cr(III),Co(II),Ni(II),Cu(II),Zn(II),Hg(II) and U(VI)] was treated with the ligand-embedded silica in 10(-3) M aqueous solution. The measurement of metal extraction capacity of the silica based ligand was done by multielemental analysis of the metal complexes thus formed by using Proton Induced X-ray Emission (PIXE) technique.     

Chemically modified silica gel for selective solid-phase extraction and preconcentration of heavy metal ions

This paper describes our research on the synthesis of the sorbent with chemically bonded ketoimine groups, and, furthermore, using this sorbent in the SPE technique to extract and preconcentrate trace amounts of metal ions in water samples. Surface characteristics of the sorbent were determined by elemental analysis, NMR spectra for the solid phases (²⁹Si CP MAS NMR), and analysis of pore size distribution of the sorbent and nitrogen adsorption-desorption. The newly proposed sorbent with ketoimine groups was applied for the extraction and preconcentration of trace amounts of Cu (II), Cr (III) and Zn (II) ions from the water from a lake, post-industrial water and purified water unburdened back to the lake. The determination of the transition-metal ions was performed on an emission spectroscope with inductively coupled plasma ICP-OES. For the batch method, the optimum pH range for Cu (II) and Cr (III) extraction was equal to 5, and Zn(II)–to 8. All the metal ions can be desorbed from SPE columns with 10?mL of 0.5?mol?HNO₃. The detection limits of the method were found to be 0.7?µg?L^?1 for Cu (II), 0.08?µg?L^?1 for Cr (III), and 0.2?µg?L^?1 for Zn (II), respectively.     

Sorption and preconcentration of copper and cadmium on silica gel modified with 3-aminopropyltriethoxysilane

3-Aminopropyltriethoxysilane, (C₂H₅O)₃ Si(CH₂)₃NH₂, loaded on silica gel was used as a pre-concentration sorbent for copper and cadmium prior to their determination by flame atomic absorption spectrometry (FAAS). Both batch and column methods were used for the separation of the above metals. The analytes are quantitatively retained on the proposed adsorbent at pH 6.5. The complexation capacity of the collector is 0.032 mmol Cu/g silica. In the batch method, the effects of shaking time and the ratio of metal/silica on the retention by the asorbent were investigated. Columns filled with the collector provided quantitative recovery of the above metals from standardized samples as well as from sodium chloride solutions.     

Thermogravimetric study of silica with a chemically modified surface

Thermal methods were used to determine the thermal stability of organic groups introduced into the surface of silica precipitated following its reactions with dimethyl-dichlorosilane (DDS), methyltrichlorosilane (MTS) and methyltriethoxysilane (MTES).It was found that modification with MTS or DDS leads to a permanent hydrophobic film on the silica surface.

---

Zusammenfassung Thermische Methoden wurden benutzt, um die thermische Stabilität von organischen Gruppen zu bestimmen, die auf die Oberfläche von ausgefällter Kieselsäure durch die Reaktion mit Dimethyldichlorsilan (DDS), Methyltrichlorsilan (MTS) und Methyltriäthoxysilan (MTES) eingebracht wurden. Die Modifizierung mit MTS oder DDS verursacht auf der Oberfläche der Kieselsäure eine permanente hydrophobe Schicht.

---

, , . , .

     

Sorption of noble-metal ions on silica with chemically bonded nitrogen-containing ligands

A study has been made of the sorption of Ir(IV), Rh(III), Pt(IV), Ru(IV), Os(VIII), Pd(II) and Au(III) from aqueous solutions by silica chemically modified with nitrogen-containing organic ligands, as a function of hydrochloric acid concentration, time of contact, concentration of the element and the ionic strength. Sorption of noble-metal ions at pH > 1 on a sorbent containing monoamine groups seems to be due to a complexation mechanism, and to an anion-exchange mechanism at pH < 1. With aminopropyl-silica 1000-fold concentration of Ir(IV) and Rh(III) from their 10(-8)-10(-7)M solutions was achieved and these metals were subsequently determined on the sorbent surface by X-ray fluorescence. Detection limits were 10-20 ng/ml. There was no interference from 1000-fold quantities of non-ferrous metal ions and Fe(III). With the sorbent containing bonded diethylenetriamine groups, 1000-fold concentration of Au(III) was achieved, and it was then determined on the sorbent surface by an atomic-emission method. Conditions for desorption of Au(III) with pyridine and potassium thiocyanate were developed.     

X-Ray fluorescence determination of trace toxic metals with extraction and preconcentration on silica gel chemically modified with mercapto groups

The sorption properties of silica gel with γ-mercaptopropyl groups chemically immobilized on its surface toward Pb(II), Cd(II), and Zn(II) at MPC levels in natural water in Ukraine were studied. The mutual effect of Pb(II), Cd(II), and Zn(II) in the sorption-X-ray fluorescence determination of their trace amounts with preextraction on silica gel with γ-mercaptopropyl groups was examined     

Potentiometric study using chemically modified silica gel with pyridinium as membrane for ClO 4 − ions

A potentiometric sensor for the perchlorate anion was developed by mixing chemically modified silicagel with pyridinium perchlorate, with an epoxy polymer and graphite. The electrode showed Nernstian response between 1.0 × 10^–2 and 1.0 × 10^–3 M perchlorate concentrations. The electrode showed high selectivity to this ion at solutions pH between 5.5 and 8.0. The presence of IO ₄ ^– , NO ₃ ^– ,Br^–, IO ₃ ^– , Cl^– and SO ₄ ^2– ions in the solutions, had only small interference in the electrode response in the range mentioned.     

Adsorption of metal halides from ethanol solutions by a 3-n-propylpyridiniumsilsesquioxane chloride-coated silica gel surface

3-n-propylpyridiniumsilsesquioxane chloride polymer, abbreviated as SiPy+Cl-, was used to coat a porous silica gel, SiO2, surface to form the chemically modified solid SiO2/SiPy+Cl-. The resulting polymer film was well adhered to the surface and presented an ion exchange capacity of 0.74 mmol g(-1). Metal halides, MClz [M=Fe(III), Cu(II), and Zn(II)], were adsorbed by the modified solid from ethanol solutions as neutral species by forming the surface anionic complexes described by the equation: mSiO2/SiPy+Cl-+ MClz <=> (SiO2/SiPy+)m[MCl(z+m)]m-, where the [MCl(z+m)]m- species adsorbed on the surface are FeCl4-, ZnCl4(2-), and CuCl4(2-). Accurate estimates of the specific sorption capacities and the heterogeneous stability constants of the immobilized metal complexes were determined with the aid of computational procedures.     

Separation of noble metal ions on silica with chemically bonded ligands

The separation of noble metal ions was investigated by chemically bonded ligands based on the concept of hard and soft acids and bases according to Pearson; influences of ion pairing and chelating effects are discussed. Complexing groups containing oxygen, nitrogen and sulphur were immobilized on silica gel. Ag, Au, Ir, Os, Pd, Pt and Rh were adsorbed in the acidic range (pH 0 to pH 5) and eluted from the gel in the range from pH 0 to pH 7.5 avoiding formation of hydroxides and coprecipitation of the noble metals. The separation is dependent on the immobilized ligand, the pH-value of sorption and desorption and the eluent.     

Use of silica gel chemically modified with zirconium phosphate for preconcentration and determination of lead and copper by flame atomic absorption spectrometry

An analytical method using silica gel chemically modified with zirconium (IV) phosphate for preconcentration of lead and copper, in a column system, and their sequential determination by flame atomic absorption spectrometry (FAAS), was developed. Sample solutions are passed through a glass column packed with 100 mg of the sorbent material, at pH 4.5, and lead and copper are eluted with 1.0 mol l⁻¹ HNO₃ at a flow rate of 2.0 ml min⁻¹. The extraction of copper is affected by Fe(II), Mn(II), Zn(II), Ni(II) and Co(II) while only Fe(II) interferes in the lead determination. These interferences may be overcome with an appropriate addition of a KI or NaF solution. An enrichment factor of 30 was obtained for both metals. While the limits of detection (3σ) were 6.1 and 1.1 μg l⁻¹, for Pb and Cu, respectively, the limits of determination were 16.7 and 3.3 μg l⁻¹. The precision expressed as relative standard deviation (R.S.D.) obtained for 3.3 μg l⁻¹ of Cu and 16.7 μg l⁻¹ of Pb were 4.3 and 4.7%, respectively, calculated from ten measurements. The proposed method was evaluated with reference material and was applied for the determination of lead and copper in industrial and river waters.     

Solid phase extraction and preconcentration of some metal ions using Schiff base immobilised silica gel followed by ICP-OES

ABSTRACT

In this study, a simple and efficient solid phase extraction procedure was developed for simultaneous separation and preconcentration of Ba, Cd, Co, Cu, Mn and Ni. The methodology was based on preconcentration of the target analytes on N,N’-bis(4-methoxysalicylidene)-1,3-propanediamine modified silica gel prior to inductively coupled plasma optic emission spectrometry detection. The experimental conditions were as follows: pH of sample 5.00; sample and eluent flow rates 3 mL min^?1; sample volume 25 mL; eluent 0.5 mol L^?1 HNO₃; eluent volume 3.0 mL. Preconcentration factor was achieved as 33.3 for Ba, Co, Mn; 83.3 for Cd, Ni; 166.7 for Cu. Limits of detection were found as 0.33, 0.26, 0.27, 0.36, 0.27 and 0.19 µg L^?1 for Ba, Cd, Co, Cu, Mn and Ni, respectively. The relative standard deviations of 2.6–3.8% were obtained via nine parallel analyses. The suggested procedure was successfully validated by the analysis of TMDA-53.3 Lake Ontario water and ERM-CA022a soft drinking water certified reference materials and applied to various natural water samples.     

Preconcentration of metal ions on silica gel modified with 3(1-imidazolyl)propyl groups

Silica gel functionalized with 3(1-imidazolyl)propyl groups and packed in a glass column is used to adsorb and preconcentrate metal ions from ethanol solution. Elution is done with 0.1 M hydrochloric acid in an ethanol/water mixture having a mole fraction of water of 0.85. The modified silica is applied to preconcentrate metal ions (Cu, Ni, Fe, Zn and Cd) from commercial ethanol, normally used as engine fuel. The method is suitable for quantifying these metals at low μg 1^?1 levels.     

Separation and preconcentration of metal ions and their estimation in vitamin, steel and milk samples using o-vanillin-immobilized silica gel

o-Vanillin-immobilized silica gel has been used for the adsorption and estimation of copper, cobalt, iron and zinc by both batch and column techniques. Metal ions were quantitatively retained on the column packed with immobilized silica gel in the pH range 4.0-6.0 for Cu, 5.0-6.0 for Co, 4.5-6.0 for Fe and 6.0-8.0 for Zn. The distribution coefficient D determined for each metal was as follows (ml g(-1)): Fe, 5.4x10(2); Cu, 4.9x10(2); Zn, 4.4x10(2); Co, 3.8x10(2). Methods have been developed to estimate zinc, copper and cobalt in milk, steel and vitamin samples, respectively.     

Highly sensitive sorption-luminescence determination of trace europium with preconcentration on silica chemically modified with iminodiacetic acid

Features of a sorption-luminescence method for the determination of trace europium were studied. The method includes the preliminary sorption of europium at pH 7.1 from solutions with silica chemically modified with iminodiacetic acid, the subsequent treatment of the sorbent with 2-thenoyltrifluoroacetone at pH 8.0, and the measurement of the intensity of luminescence of the surface three-component europium complex at 613 nm. The effect of moisture as the quencher of luminescence of the surface europium complex was studied, and techniques for its removal were proposed. Sorption in the static mode provides the detection limit of europium of 7 × 10⁻⁵ μg/mL. The calibration plot is linear in the range of two orders of magnitude of europium concentration in solutions. The relative standard deviation in the determination of 1.5 × 10⁻² μg/mL europium is 5%. In the dynamic mode of sorption from 1000 mL of an analyzed solution with the use of sorption-desorption, the detection limit of europium of 8 × 10⁻⁷ μg/mL was attained. Original Russian Text ? R.D. Voronina, N.B. Zorov, 2007, published in Zhurnal Analiticheskoi Khimii, 2007, Vol. 62, No. 3, pp. 230–237.     

Low-temperature sorption-luminescence determination of silver using silica gel chemically modified with mercaptopropyl groups

Silica gel chemically modified with mercaptopropyl groups extracts silver(I) from solutions in the acidity ranges from 4 M HNO₃ to pH 8 and from 0.01 M HCl to pH 7. The time it takes to attain a sorption equilibrium is no more than 2 min; distribution coefficient is 1 × 10⁵ cm³/g. Yellow-orange luminescence was produced in the adsorbent phase upon the UV irradiation of wet adsorbates cooled to the liquid-nitrogen temperature (77 K). This effect was used for the development of a procedure for the low-temperature sorption-luminescence determination of silver. The calibration graph was linear in the range 1–80 µg Ag per 0.1 g of adsorbent. The detection limit was 0.05 µg per 0.02 g of adsorbent. The relative standard deviation was no more than 6% for silver amounts higher than 5 µg.__________Translated from Zhurnal Analiticheskoi Khimii, Vol. 60, No. 4, 2005, pp. 390–393.Original Russian Text Copyright © 2005 by Losev, Elsuf ev, Trofimchuk.     

Sorption of traces of strontium ions on silica gel containing crown ether

This paper is concerned with the synthesis of silica gel sorbents by the sol method. A sorbent selective for trace amounts of Sr ions has been prepared. This method of synthesis is shown to be preferable to the tradition of impregnating the carrier.L. V. Pisarzhevskii Institute of Physical Chemistry, Ukrainian Academy of Sciences, Ukraine, 252039 Kiev, Science Prosp., 31. Translated from Teoreticheskiya i Éksperimental'naya Khimii, Vol.32, No. 4, pp. 258–260, July–August, 1996. Original article submitted October 17, 1995.     

Adsorption of Cu(II) and Co(II) complexes on a silica gel surface chemically modified with 2-mercaptoimidazole

The isotherms of adsorption of MeX₂ (Me = Cu²⁺, Co²⁺; X = Cl^–, Br^–, ClO ₄ ^– ) by silica gel chemically modified with 2-mercaptoimidazole (SiMI) were studied in acetone and ethanol solutions, at 25 °C. Covalently attached 2-mercaptoimidazole molecule to silica gel surface adsorbs MeX₂ from solvent by forming a surface complex. The metal is bonded to the surface through the nitrogen atom of attached 2-mercaptoimidazole. At low loading, the electronic and ESR spectral parameters indicated that the Cu²⁺ complexes are in a distorted-tetragonal symmetry field. The d-d electronic transition spectra showed that for Cu(ClO₄)₂ complex, the peak of absorption did not change for any degree of metal loading and for Cl^– and Br^– complexes, the peak maxima shifted to higher energy with lower metal loading. The CoX₂(X = Cl^–, Br^–, ClO ₄ ^– ) analogues possess a distorted-tetrahedral field.