Spectrophotometric methods for the determination of nifurtimox in bulk form and pharmaceutical formulations

Three simple and sensitive methods for the assay of Nifurtimox (NIF) which is an active antitrypanocide were developed. These methods are based on the formation of coloured species by treating either its reduction product with 3-methyl-2-benzothiazolinone hydrazone (MBTH) in the presence of ferric chloride (method A) or its hydrolysis product with 2-thiobarbituric acid (TBA) (method B) or by oxidizing it with excess N-bromosuccinamide (NBS) and determining the consumed NBS using p-N-methylaminophenol sulphate (metol)-isonicotinic acid hydrazide (INH) (method C). All variables have been optimized and the reaction mechanisms presented. Regression analysis of Beer's plot showed good correlation in the concentration range of 2.5-10, 2.5-30 and 1.25-7.5 microg/ml for methods A, B and C, respectively. No interference was observed from the additives and the validity of the methods was tested by analysing the tablets. Recoveries were 99.2-100.9%.     

Spectrophotometric determination of azathioprine in pharmaceutical formulations

Four simple and sensitive visible spectrophotometric methods (A–D) have been described for the assay of azathioprine (ATP) either in pure form or in pharmaceutical formulations. Methods A and B are based on the oxidation of ATP with excess N-bromosuccinimide (NBS) or chloramine-T (CAT) and determining the consumed NBS or CAT with a decrease in colour intensity of celestine blue (CB) (method A) or gallocyanine (GC) (method B), respectively. Methods C and D are based on the diazotisation of reduced azathioprine (RATP) with excess nitrous acid and estimating either the consumed nitrous acid (HNO₂) with cresyl fast violet acetate (CFVA) (method C) or by coupling reaction of the diazonium salt formed with N-1-naphthyl ethylene diamine dihydrochloride (NED) (method D). All of the variables have been optimized and the reactions presented. The concentration measurements are reproducible within a relative standard deviation of 1.0%. Recoveries are 99.2–100.3%.     

Spectrophotometric methods for the determination of prazosin hydrochloride in tablets

Four simple and sensitive methods for the assay of prazosin hydrochloride (PRH) are developed. These methods are based on the formation of coloured species by treating it either with excess N-bromosuccinimide (NBS) and determining the unconsumed NBS with p-N-methyl aminophenol sulphate (metol)-sulphanilamide (SA) reagent (method A, lambda(max) 520 nm): with 3-methyl-2-benzothiazolinone hydrazone hydrochloride (MBTH) in the presence of eerie ammonium sulphate (CAS) (method B, lambda(max) 620 nm) or with acidic dyes such as orange-II (O-II) (method C, lambda(max) 490 nm) and alizarin violet 3B (AV-3B) (method D, lambda(max) 570 nm) under the specified experimental conditions. Regression analysis of Beer's law plot showed good correlation in the concentration range of 1.0-10.0, 2.5-25.0, 1.0-17.5 and 2.5-30.0 mug ml for methods A, B, C and D respectively.     

Utility of oxidation-reduction reaction for the determination of ranitidine hydrochloride in pure form,in dosage forms and in the presence of its oxidative degradates

Three simple, accurate and sensitive colorimetric methods (A, B and C) for the determination of ranitidine HCl (RHCl) in bulk sample, in dosage forms and in the presence of its oxidative degradates are described. The first method A is based on the oxidation of the drug by N-bromosuccinimide (NBS) and determination of the unreacted NBS by measurement of the decrease in absorbance of amaranth dye (AM) at a suitable lambda(max)=520 nm. The methods B and C involve the addition of excess Ce(4+) and determination of the unreacted oxidant by decrease the red color of chromotrope 2R (C2R) at a suitable lambda(max)=528 nm for method B or decrease the orange pink color of rhodamine 6G (Rh6G) at a suitable lambda(max)=526 nm for method C. Regression analysis of Beer-Lambert plots showed good correlation in the concentration ranges 0.2-3.6, 0.1-2.8 and 0.1-2.6 microg ml(-1) for methods A, B and C, respectively. The apparent molar absorptivity. Sandell sensitivity, detection and quantitation limits were calculated. For more accurate results, Ringbom optimum concentration ranges were 0.3-3.4, 0.2-2.6 and 0.2-2.4 microg ml(-1) for methods A, B and C, respectively. Analyzing pure and dosage forms containing RHCl tested the validity of the proposed methods. The relative standard deviations were 相似文献   

Spectrophotometric determination of astemizole

Four simple and sensitive spectrophotometric methods for the determination of astemizole (AZ) in pure samples and pharmaceutical formulations are described. They are based on the oxidation of astemizole with excess N-bormosuccinimide (NBS) and determination of the unconsumed NBS with, metol-sulphanilamide (method A, lambda(max): 520 nm) or celestine blue (method B, lambda(max): 540 nm); or by the reduction of Folin-ciocalteu reagent (method C, lambda(max): 720 nm); or by the formation of a chloroform-soluble, coloured ion-association complex between the drug and azocarmine G (AG) at pH 1.5 (method D, lambda(max); 540 nm). The results obtained are reproducible with a coefficient of variation of less than 1.0%.     

Three simple spectrophotometric methods for the determination of sulphinpyrazone

Three simple and sensitive spectrophotometric methods for the determination of sulphinpyrazone (SP) in bulk samples and pharmaceutical formulations are described. They are based on the oxidation of sulphinpyrazone with excess N-bromosuccinimide (NBS) and determination of the unconsumed NBS with metol-isonicotinic acid hydrazide (method A, lambda(max): 620 nm); by the reduction of Folin-Ciocalteu reagent (method B, lambda(max) 770 nm); or by the formation of a chloroform-soluble, coloured ion-association complex between the drug and Methylene Violet (MV) at pH 7.0 (method C, lambda(max) 545 nm).     

Spectrophotometric Methods for the Determination of Nelfinavir Mesylate

Three visual spectrophotometric methods are described for the assaying of nelfinavir mesylate (NEL) in either bulk form or dosage forms. Methods A-C are based on the oxidation of NEL with an excess of oxidant (N-bromosuccinimide (NBS) in methods A&B or chloramine-T (CAT) in method C) in acidic medium. The unreacted oxidant is then estimated colorimetrically using an oxidisable dye (Celistine blue (CB) in method A or Gallocyanine (GC) in method C) or p-N-methyl aminophenol sulphate (PMAP)-sulphanilamide (SA) reagent (in method B). These methods obey Beer's law and give reproducible results. Recoveries range from 99.3–100.5%.     

Spectrophotometric determination of olanzapine by its oxidation with N-bromosuccinimide and cerium(IV)sulfate.

Three simple spectrophotometric methods have been described for the assay of olanzapine in its pure and pharmaceutical formulations. The direct method (A) is based on the drug oxidation with excess of N-bromosuccinimide in acidic medium and the two indirect methods (B and C) are based on the oxidation of the drug with excess of N-bromosuccinimide and cerium(IV)sulfate, followed by the reaction of the unconsumed oxidants with celestine blue. The calibration graphs were linear over the range 10 - 120 microg mL(-1) (method A), 0.5 - 6.0 microg mL(-1) (method B) and 0.6 - 3.0 microg mL(-1) (method C). After validation, the proposed methods were successfully applied to assay of olanzapine in its commercial tablets with mean percentage recoveries of 101.23 +/- 0.10, 96 +/- 0.10 and 94 +/- 0.04%. The mechanism of olanzapine oxidation with N-bromosuccinimide was also proposed.     

Indirect spectrophotometric determination of diltiazem hydrochloride in pure form and pharmaceutical formulations

Three simple, accurate, and sensitive spectrophotometric methods (A, B and C) have been described for the indirect assay of diltiazem hydrochloride (DIL.HCl), either in pure form or in pharmaceutical formulations. The first method (A) is based on the oxidation of DIL.HCl by N-bromosuccinimide (NBS) and determination of unconsumed NBS by measuring the decrease in absorbance of amaranth dye (AM) at a suitable λ _max =521 nm. Other methods (B) and (C) involve the addition of excess cerric ammonium sulfate (CAS) and subsequent determination of the unconsumed oxidant by a decrease in the red color of chromotrope 2R (C2R) at a suitable λ _max =528 nm or a decrease in the orange-pink color of rhodamine 6G (Rh6G) at λ _max =525 nm, respectively. Regression analysis of Beer-Lambert plots showed good correlation in the concentration ranges 3.0–9.0, 3.5–7.0 and 3.5–6.3 μg ml⁻¹ for methods A, B and C, respectively. The apparent molar absorptivity, Sandell's sensitivity, detection and quantification limits were calculated. The proposed methods have been applied successfully for the analysis of the drug in its pure form and its dosage form. No interference was observed from a common pharmaceutical adjuvant. Statistical comparison of the results with the reference method shows excellent agreement and indicates no significant difference in accuracy and precision.     

Ultra-fast gradient LC method for omeprazole analysis using a monolithic column: assay development, validation, and application to the quality control of omeprazole enteric-coated pellets

A method was optimized for the analysis of omeprazole (OMZ) by ultra-high speed LC with diode array detection using a monolithic Chromolith Fast Gradient RP 18 endcapped column (50 x 2.0 mm id). The analyses were performed at 30 degrees C using a mobile phase consisting of 0.15% (v/v) trifluoroacetic acid (TFA) in water (solvent A) and 0.15% (v/v) TFA in acetonitrile (solvent B) under a linear gradient of 5 to 90% B in 1 min at a flow rate of 1.0 mL/min and detection at 220 nm. Under these conditions, OMZ retention time was approximately 0.74 min. Validation parameters, such as selectivity, linearity, precision, accuracy, and robustness, showed results within the acceptable criteria. The method developed was successfully applied to OMZ enteric-coated pellets, showing that this assay can be used in the pharmaceutical industry for routine QC analysis. Moreover, the analytical conditions established allow for the simultaneous analysis of OMZ metabolites, 5-hydroxyomeprazole and omeprazole sulfone, in the same run, showing that this method can be extended to other matrixes with adequate procedures for sample preparation.     

A rapid spectrophotometric assay of some organophosphorus pesticide residues in vegetable samples

A rapid and sensitive spectrophotometric method for the determination of some organophosphorus insecticides, i.e. malathion, dimethoate and phorate is described. It is based on the oxidation of organophosphorus pesticide with slight excess of N-bromosuccinimide (NBS) and the unconsumed NBS is determined with rhodamine B (lambda max: 550 nm). Beer's law is obeyed in the concentration range 0.108-1.08, 0.056-0.56 and 0.028-0.28 microg mL(-1) for malathion, phorate and dimethoate, respectively. The method has been successfully applied for the determination of organophosphorus pesticide residues in various vegetable samples.     

Spectrophotometric methods for the determination of anti-emetic drugs in bulk and in pharmaceutical preparations.

Four rapid, simple, reproducible and sensitive methods (A-D) for assaying domperidone (I) and metoclopramide (II) in a bulk sample and in dosage forms were investigated. The first and second methods, A and B, are based on the oxidation of I and/or II by Fe3+ in the presence of o-phenanthroline (o-phen) or bipyridyl (bipy). The formation of tris-complex upon reactions with Fe3+-o-phen and/or Fe3+-bipy mixture in an acetate buffer solution of the optimum pH-values was demonstrated. Methods C and D involve the addition of excess Ce4+ and the determination of unreacted oxidant by a decrease of the red color of chromotrope 2R (C2R) at a suitable lambda(max) of 528 nm for method C, or a decrease in the orange pink color of Rhodamine 6G (Rh6G) at a suitable lambda(max) value of 525 nm for method D. A regression analysis of Beer-Lambert plots showed a good correlation in the concentration range of 0.2-5.8 microg ml(-1). The apparent molar absorptivity, Sandell sensitivity, detection and quantification limits were calculated. For a more accurate analysis, the Ringbom optimum concentration ranges are 0.35-5.6 microg ml(-1). The developed methods were successfully applied to the determination of domperidone and metoclopramide in bulk and pharmaceutical preparations without any interference from common excipients.     

Spectrophotometric methods for the determination of tamoxifen citrate

Three simple and sensitive spectrophotometric methods for the determination of tamoxifen citrate have been developed. They are based on the formation of an ion-association complex between the drug and a dye, Erioglaucine A, which is extractable into chloroform and has an absorption maximum at 625 nm (method A), oxidation with excess potassium permanganate and the determination of unconsumed permanganate using Fast Green FCF (method B), or by the formation of a coloured cobalt thiocyante coordination complex which is extracted into benzene and measured at 635 nm (method C). Beer's law limits for methods A, B, and C are 0.5-3.0 mug ml(-1), 1.0-6.0 mug ml(-1) and 100-500 mug ml(-1), respectively. No interference was observed from tableting additives and the applicability of the methods was examined by analysing tablets containing tamoxifen. The quantities determined were 99.0-100.03% of the exptected values.     

Determination of doxorubicin hydrochloride by visible spectrophotometry

Four simple and sensitive visible spectrophotometric methods (A-D) have been described for the assay of doxorubicin hydrochloride either in pure form or in pharmaceutical formulations. Method A was developed based on oxidation of the drug with Fe(III) to produce Fe(II), which subsequently reacts with 1.10-ortho-phenanthroline to form a red colored complex (lambda(max): 510 nm) at pH 4.6. Method B involves the reduction of Folin-Ciocalteu (F-C) reagent by the drug and the reduced species formed possesses a characteristic intense blue color (lambda(max): 770 nm). In methods C and D. oxidation of the drug with periodate at specified experimental conditions yields formaldehyde and dialdehyde, which in turn react either with 3-methyl-2-benzothiazolinone hydrazone hydrochloride to form an intensely brilliant blue cationic dye (lambda(max): 620-670 nm. method C) or by condensation with phenylhydrazine hydrochloride (PHH) to form orange-red colored product (lambda(max): 510 nm, method D) in the presence of potassium ferricyanide. All of the variables have been optimized and the reaction mechanisms presented. The concentration measurements are reproducible within a relative standard deviation of 1.0%.     

Grain-scale heterogeneities in the stable carbon and oxygen isotopic compositions of the international standard calcite materials (NBS 19, NBS 18, IAEA-CO-1, and IAEA-CO-8)

We determined grain-scale heterogeneities (from 6 to 88 microg) in the stable carbon and oxygen isotopic compositions (delta(13)C and delta(18)O) of the international standard calcite materials (NBS 19, NBS 18, IAEA-CO-1, and IAEA-CO-8) using a continuous-flow isotope ratio mass spectrometry (CF-IRMS) system that realizes a simultaneous determination of the delta(13)C and the delta(18)O values with standard deviations (S.D.) of less than 0.05 per thousand for CO(2) gas. Based on the S.D. of the delta(13)C and delta(18)O values determined for CO(2) gases evolved from the different grains of the same calcite material, we found that NBS 19, IAEA-CO-1, and IEAE-CO-8 were homogeneous for delta(13)C (less than 0.10 per thousand S.D.), and that only NBS 19 was homogeneous for delta(18)O (less than 0.14 per thousand S.D.). On the level of single grains, we found that both IAEA-CO-1 and IAEA-CO-8 were heterogeneous for delta(18)O (1.46 per thousand and 0.76 per thousand S.D., respectively), and that NBS 18 was heterogeneous for both delta(13)C and delta(18)O (0.34 per thousand and 0.54 per thousand S.D., respectively). Closer inspection of NBS 18 grains revealed that the highly deviated isotopic compositions were limited to the colored grains. By excluding such colored grains, we could also obtain the homogeneous delta(13)C and delta(18)O values (less than 0.18 per thousand and less than 0.16 per thousand S.D., respectively) for NBS 18. We conclude that NBS 19, IAEA-CO-1, or pure grains in NBS 18 are suitable to be used as the standard reference material for delta(13)C, and that either NBS 19 or pure grains in NBS 18 are suitable to be used as the reference material for delta(18)O during the grain-scale isotopic analyses of calcite.     

Indirect flow-injection spectrophotometric determination of meloxicam, tenoxicam and piroxicam in pharmaceutical formulations.

A simple and sensitive indirect spectrophotometric method for the assay of meloxicam (MX), tenoxicam (TX) and piroxicam (PX) in pure and in pharmaceutical formulations by flow injection analysis (FIA) has been proposed. The method is based on the oxidation of these drugs by a known excess of N-bromosuccinimide (NBS) in an acidic medium, followed by a reaction of excess oxidant with chloranilic acid (CAA) to bleach its purple color. The absorbance values increased linearly with increasing concentrations of the drugs. Variables, such as the acidity, reagent concentrations, flow rate of reagents and other FI parameters were optimized to produce the most sensitive and reproducible results. The system obeyed Beer's low over concentration ranges of 10 - 160, 20 - 200 and 10 - 160 microg/ml for MX, TX and PX, respectively. The common excipients and additives did not interfere with their determinations. The method was successfully applied to the determinations of MX, TX and PX in various pharmaceutical preparations. The results obtained by the proposed method were found to be in good agreement with those found by the official HPLC methods.     

Spectrophotometric determination of linezolid in pharmaceuticals on the basis of coupled redox-complexation reactions

The present study describes three simple and sensitive spectrophotometric methods developed for the determination of linezolid (LZD) in pure and tablet forms. These methods are based on the oxidation of LZD by ferric chloride in the presence of 1,10-phenanthroline (method A), or 2,2′-bipyridyl (method B), or potassium ferricyanide (method C). The colored complexes were measured at 510, 522 and 758 nm for methods A, B and C, respectively. In all the methods, the absorbance is found to increase linearly with increasing LZD concentration. Beer’s law is obeyed over the concentration ranges of 0.5–6.0, 0.5–9.0 and 1.0–9.0 μg/mL for methods A, B and C, respectively. The calculated molar absorptivity values are 5.8 × 10⁴, 3.6 × 10⁴ and 4.8 × 10⁴ L/mol cm for methods A, B and C, respectively, and the corresponding Sandell’s sensitivities are 5.8 × 10^?3, 9.8 × 10^?3 and 7 × 10^?3 μg/cm², respectively. The developed methods are applied successfully to the determination of LZD in the pharmaceutical formulations and the results tallied well with label claims.     

Quantitation of ranitidine in pharmaceuticals by titrimetry and spectrophotometry using potassium dichromate as the oxidimetric reagent

Four new methods are described for the determination of ranitidine hydrochloride (RNH) in bulk drug and in formulations employing titrimetric and spectrophotometric techniques and using potassium dichromate as the oxidimetric reagent. In titrimetry (method A), RNH is treated with a measured excess of dichromate in acid medium, and the unreacted oxidant is back titrated with iron(II) ammonium sulfate. The three spectrophotometric methods are also based on the oxidation of RNH by a known excess of dichromate under acidic conditions followed by the determination of surplus oxidant by three different reaction schemes. In one procedure (method B), the residual dichromate is treated with diphenylcarbazide and the absorbance measured at 540 nm. Calculated amount of iron(II) is added to residual dichromate and the resulting iron(III) is complexed with thiocyanate and measured at 470 nm (method C). Method D involves reduction of unreacted dichromate by a calculated amount of iron(II) and estimation of residual iron(II) as its orthophenanthroline complex after raising the pH, and measuring the absorbance at 510 nm. In all the methods, the amount of dichromate reacted corresponds to the drug content. The experimental conditions are optimized. The titrimetric procedure is applicable over 5–10 mg range. In spectrophotometric methods, Beer’s law is obeyed in the ranges 5–50, 5–80, and 10–100 µg ml^?1 for method B, method C, and method D, respectively. The methods were validated for accuracy, precision and recovery. The proposed methods were applied to the analysis of RNH in the tablet and the injection forms, and the results were in agreement with those obtained by the reference method.     

Application of sodium metaperiodate for the determination of ribavirin in pharmaceutical formulations

Three simple and sensitive visible spectrophotometric methods (A-C) have been described for the assay of ribavirin either in pure form or in pharmaceutical formulations. They are based on the oxidation of ribavirin with excess sodium metaperiodate and estimating either the products formed (dialdehyde with MBTH, method A; iodate with metol-sulphanilamide, in the presence of Mo(VI) and iodide, method B) or the amount of periodate consumed (celestine blue in the presence of telurium (IV), method C). All of the variables have been optimized and the reaction mechanisms presented. The concentration measurements are reproducible within a R.S.D. of 1.0%. Recoveries are 99.2-101.2%.