Use of cloud point extraction with derivatizing reagent for the extraction and determination of isoniazid

A simple and sensitive cloud point extraction high-performance liquid chromatography method is proposed for the determination of isoniazid in blood. The procedure is based on the product of the reaction of isoniazid with benzaldehyde. It can be validated that there is a linear relationship between the signal of isonicotinyl hydrazone and the concentration of isoniazid. A cloud point extraction system of nonionic surfactant Triton X-100 is applied for preconcentration of isonicotinyl hydrazone. Then the analytes in surfactant-rich phase are detected with HPLC-UV system. calibration graph was obtained in the range of 2.0 × 10(-3)-0.5 mg/L, the detection limit was 5.0 × 10(-4) mg/L. Method validation is performed on serum samples spiked at two levels, the recoveries ranging from 82.17-83.81%, with relative standard deviations from 2.45% to 3.89%.     

The cloud point extraction of copper(II) with monocarboxylic acids into non-ionic surfactant phase

The possibility to use monocarboxylic acids and their mixtures with amines for copper concentrating by the way of micellar extraction at cloud point temperature, and later atomic absorption spectrometry (AAS) determination was investigated. Under the optimum conditions, preconcentration of 100 ml of water sample in the presence of 1% non-ionic surfactant OP-10, 0.005 M capric acid and 0.01 M octylamine permitted the detection of 0.01 μg ml⁻¹ copper. The proposed method has been applied to the AAS determination of copper in water samples after cloud point extraction.     

Determination of mercury in biological samples by cold vapor atomic absorption spectrometry following cloud point extraction with salt-induced phase separation

Method development for the pre-concentration of mercury in human hair, dogfish liver and dogfish muscle samples using cloud-point extraction and cold vapor atomic absorption spectrometry is demonstrated. Before the extraction, the samples were submitted to microwave-assisted digestion in a mixture of H₂O₂ and HNO₃. Cloud point extraction was carried out using 0.5% (m/v) ammonium O,O-diethyldithiophosphate (DDTP) as the chelating agent and 0.3% (m/v) Triton X-114 as the non-ionic surfactant. Phase separation was induced after the addition of Na₂SO₄ to a final concentration of 0.2 mol L⁻¹. Aliquots of the final extract were transferred to PTFE tubes and NaBH₄ and HCl were added. The mercury vapor was driven to a non-heated quartz tube for measuring the absorbance. The results obtained with salt-induced phase separation were in good agreement with the certified values at a 95% confidence level. An enrichment factor of 10 allowed a detection limit of 0.4 ng g⁻¹ to be obtained, which demonstrates the high sensitivity of the proposed procedure for the determination of mercury at trace levels.     

Semi-automated cloud point extraction with cold column trapping of surfactant-rich phase for phenazopyridine determination in human serum

A semi-automated cold column trapping-cloud point extraction (CCT-CPE) method was developed and applied to the determination of phenazopyridine in human serum. In the proposed technique, a mixture of sample (pH 8) and Triton X-100 (0.4 % v/v) was incubated at 90 °C for 5 min in a heating sample cell. The developed turbid solution was then flowed through a CCT preconcentration column packed with C18 sorbent using a peristaltic pump. A pair of thermal electric cooler (TEC) plates was used for cooling the column. The surfactant-rich phase was retained on the CCT at 0 °C and desorbed, subsequently, in an elevated temperature by ethanol. The analytical parameters such as pH, surfactant concentration, temperature and incubation time were optimized by a central composite design (response surface) method. Six replicated analyses at the optimized conditions resulted in a recovery of 99.7 % and a relative standard deviation of 2.45 for phenazopyridine. The detection limit of the method (3σ) was 0.50 mg L^?1 for the analyte. Compared to conventional CPE, the proposed CCT-CPE method required less sample handling, eliminated the centrifugation step and was substantially faster. The method was successfully applied to the determination of phenazopyridine in some human serum and tablet samples.     

Reversed phase extraction chromatographic separation of ruthenium(III)

A new an innovative separation method has been developed using N-n-octylaniline (liquid anion exchanger) coated on silica gel. Ruthenium(III) has been extracted quantitatively from 0.05 M hydrochloric acid, striped with aqueous solution of various acids and then determined by spectrophotometric method. Mutual separation scheme for ruthenium(III), iridium(III) and osmium(VIII) has been developed. Ruthenium(III) has been separated from commonly associated elements. Different parameter are studied viz effect of acid concentration, reagent concentration, striping agent, flow rate, foreign ion and synthetic mixture corresponding to alloys. Validity of method has been verified by separation of ruthenium(III) from fissium alloy.     

Cloud point extraction: an alternative to traditional liquid-liquid extraction for lanthanides(III) separation

Cloud point extraction (CPE) was used to extract and separate lanthanum(III) and gadolinium(III) nitrate from an aqueous solution. The methodology used is based on the formation of lanthanide(III)-8-hydroxyquinoline (8-HQ) complexes soluble in a micellar phase of non-ionic surfactant. The lanthanide(III) complexes are then extracted into the surfactant-rich phase at a temperature above the cloud point temperature (CPT). The structure of the non-ionic surfactant, and the chelating agent-metal molar ratio are identified as factors determining the extraction efficiency and selectivity. In an aqueous solution containing equimolar concentrations of La(III) and Gd(III), extraction efficiency for Gd(III) can reach 96% with a Gd(III)/La(III) selectivity higher than 30 using Triton X-114. Under those conditions, a Gd(III) decontamination factor of 50 is obtained.     

Preconcentrative separation of chromium(III) species from chromium(VI) by cloud point extraction and determination by flame atomic absorption spectrometry

Microchimica Acta - We describe a high-throughput technique for the determination of chromium species in water samples by flame atomic absorption spectrometry (FAAS) after preconcentrative...     

Micellar extraction preconcentration of silver with thiazolylazo reagents into a nonionic surfactant phase at the cloud point

The effect of the main factors on the extraction of the silver complexes of 4-(2-thiazolylazo)resorcinol and 1-(2-thiazolylazo)-2-naphthol into a micellar phase of a nonionic surfactant at the cloud point was studied. Conditions were found for the atomic absorption determination of silver with micellar extraction preconcentration into an OP-7 phase upon heating.     

Determination of biogenic amines as their benzoyl derivatives after cloud point extraction with micellar liquid chromatographic separation

The advantages of micellar cloud point extraction combined with a surfactant-assisted separation in a HPLC system are presented as a method for the effective separation and determination of nine biogenic amines in fish substrates. Benzoyl derivatives of the amines are extracted inside the micelles of a non-ionic surfactant, Triton X-114, and separated with gradient elution micellar liquid chromatography. Quantification was performed by measuring the UV absorbance of the benzene ring at 254 nm. Detection limits of the nine biogenic amines were in the vicinity of 0.01 mg l(-1) which are approximately 10 times lower than those of the conventional method (HPLC-UV) and 100 times lower than those of micellar electrokinetic capillary chromatography. The correlation coefficients of determinations were 0.9911-0.9996. The method was applied for the determination of putrescine, cadaverine, agmatine, tyramine, tryptamine, phenylethylamine, spermine, spermidine and histamine in trout samples. Recovery of the proposed method ranged from 95 to 103.5%.     

Liquid-liquid extraction and cloud point extraction for spectrophotometric determination of vanadium using 4-(2-pyridylazo)resorcinol

Liquid-liquid extraction (LLE) and cloud point extraction (CPE) of vanadium(V) ternary complexes with 4-(2-pyridylazo)resorcinol (PAR) and 2,3,5-triphenyl-2H-tetrazolum chloride (TTC) were investigated. The optimal conditions for vanadium extraction and spectrophotometric determination were identified. The composition (V: PAR: TTC) of the extracted species was 1:2:3 (optimal conditions; LLE), 2:2:2 (low reagents concentrations; LLE), 1:1:1 (short heating time;CPE), and 1: 1: 1 + 1: 1: 0 (optimal extraction conditions; CPE). LLE, performed in the presence of 1,2-diaminocyclohexane-N,N,N′,N′-tetraacetic acid and NH₄F as masking agents, afforded the sensitive, selective, precise, and inexpensive spectrophotometric determination of vanadium. The absorption maximum, molar absorptivity, limit of detection, and linear working range were 559 nm, 1.95 × 10⁵ dm³ mol^?1 cm^?1,0.7 ng cm^?3, and 2.2–510 ng cm^?3, respectively. The procedure thus developed was applied to the analysis of drinking waters and steels. The relative standard deviations for V(V) determination were below 9.4 % (4–6 × 10^?7 mass %; water samples) and 2.12 % (1–3 mass %; steel samples).     

浊点萃取-分光光度法测定粉煤灰中痕量Ni(Ⅱ)

利用非离子表面活性剂Triton X-114在温度高于其浊点时形成相分离行为,建立了浊点萃取富集痕量Ni(Ⅱ)的新方法.在pH9.5的Na2B4O7-NaOH缓冲溶液中,Ni(Ⅱ)与1-(4-硝基苯基)-3-(5,6-二甲基-1,2,4三氮唑)-三氮烯(NPDMTT)反应生成稳定的络合物,在475 nm处出现正吸收峰,...     

Simultaneous separation of ergot alkaloids by capillary electrophoresis after cloud point extraction from cereal samples

A new and sensitive analytical methodology for ergot alkaloids (EA) determination from cereal samples based on cloud point extraction (CPE) prior to CE‐UV absorbance was developed. The methodology involves extraction under acid conditions and subsequent preconcentration by applying a simple, rapid and environmentally friendly low volume surfactant extraction procedure. After extraction, CE analysis was carried out by performing dilutions on preconcentrated surfactant rich phase, achieving a single peak or simultaneous alkaloids determination. A real preconcentration factor of 22 of total EA was obtained, demonstrating the efficiency of this methodology. The limits of detection were 2.6 and 2.2 μg/kg for ergotamine and ergonovine, respectively. Validation procedure revealed suitable linearity, accuracy and precision. The average extraction and clean‐up recoveries were compared with the theoretical values and were better than 92%. This method was successfully applied to the determination of EA in different varieties of commercial flour samples, two grain samples and one of the leading brands cereal‐based product for infant feeding. The high sensitivity achieved for EA determinations in real samples suggests CPE procedure as an interesting approach to improve CE‐UV visible detection limits. Moreover, the whole process could be considered as a contribution to green chemistry because nonorganic solvents were involved, demonstrating its great potential over conventional techniques.     

Determination of triptonide by cloud point extraction combined with MEKC

A method has been developed for the determination of triptonide in the traditional Chinese herb Tripterygium wilfordii Hook F. by micellar electrokinetic capillary chromatography combined with cloud point extraction. The analyte was extracted at pH 3.0 by micelles of the nonionic surfactant polyoxyethylene 7,5-octylphenyl ether (Triton X-114). A 250-muL aliquot from the extracted surfactant-rich phase was diluted to 400 muL with ethanol to reduce its viscosity before separation by MEKC. Under optimum conditions, an enrichment factor of 25 is obtained and the determination limit of triptonide is found to be 3.15 x 10(-7) mol/L. The proposed method has been successfully applied to the determination of triptonide in T. wilfordii tablet and spiked urine matrix, demonstrating the feasibility and reliability of the proposed method.     

“Clickable” affinity ligands for effective separation of glycoproteins

In this paper, we present a new modular approach to immobilize boronic acid ligands that can offer effective separation of glycoproteins. A new “clickable” boronic acid ligand was synthesized by introducing a terminal acetylene group into commercially available 3-aminophenyl boronic acid. The clickable ligand, 3-(prop-2-ynyloxycarbonylamino)phenylboronic acid (2) could be easily coupled to azide-functionalized hydrophilic Sepharose using Cu(I)-catalyzed 1,3-dipolar cycloaddition reaction under mild condition. Compared to other boronic acid affinity gels, the new affinity gel displayed superior effectiveness in separating model glycoproteins (ovalbumin and RNase B) from closely related bovine serum albumin and RNase A in the presence of crude Escherichia coli proteins. Because of the simplicity of the immobilization through “click chemistry”, the new ligand 2 is expected to not only offer improved glycoprotein separation in other formats, but also act as a useful building block to develop new chemical sensors for analysis of other glycan compounds.     

Determination of diethylhexyladipate and acetyltributylcitrate in aqueous extracts after cloud point extraction coupled with microwave assisted back extraction and gas chromatographic separation

The determination of commercial plasticizers (di-(2-ethylhexyl)adipate (DEHA) and acetyl tributyl citrate (ATBC)) in aqueous solutions is described. The newly proposed technique of applying microwaves to cloud point extracts in order to enable combination with gas chromatographic analysis has been used for this purpose. Both plasticizers were entrapped in the micelles of the non-ionic surfactant Triton X-114 and removed from the bulk phase by centrifugation. Micellization was enhanced by increasing the ionic strength of the solution with concentrated NaCl. Extraction recoveries of the proposed method were over 95% for water and 3% (w/v) aqueous acetic acid and over 85% for 10% (v/v) aqueous ethanol, respectively. The calibration curves obtained, following the proposed methodology have a linear range between 50 and 2000 microg/L for each analyte while the detection limits were as low as 15 and 19 microg/L for DEHA and ATBC, respectively, with an RSD below 5% even for low concentrations. As an analytical demonstration the proposed methodology was applied for the determination of the migration levels of the selected plasticizers from a PVC food packaging film into aqueous simulants.     

Use of selective extraction and fast chromatographic separation combined with electrophoretic methods for mapping of membrane proteins

A model system for selective solubilization and fast separation of proteins from the rat liver membrane fraction and purified rat liver plasma membranes for their further proteomic analysis is presented. For selective solubilization, high-pH solutions and a concentrated urea solution, combined with different detergents, are used. After extraction, proteins are separated by anion-exchange chromatography or a combination of anion- and cation-exchange chromatography with convective interaction monolithic supports. This separation method enables fast and effective prefractionation of membrane proteins based on their hydrophobicity and charge prior to one-dimensional (1-D) and 2-D electrophoresis and mass spectrometry. By use of this sample preparation method, the less-abundant proteins can be detected and identified.     

Evaluation of the factors affecting extraction of organic compounds based on the acid-induced phase cloud point approach

On the basis of a better analytical exploitation of acid-induced cloud point approach, a systematic study on the phase behaviour of acid aqueous solutions of anionic surfactants and factors affecting anionic surfactant-mediated extractions was performed. The anionic surfactants investigated were alkylsulphonates (ASS) with alkylchain lengths comprised between 8 and 16 carbon atoms. The critical hydrochloric acid concentration (minimal acid concentration required to separation in two liquid phases) was found to increase as alkylchain length of the anionic surfactant increased from 10 to 14. Non-acid-induced liquid-liquid phase separation was observed for sodium octanesulphonate (SOS) or sodium hexadecyl sulphonate (SHS) in the hydrochloric concentration range 0-10 M. Acid aqueous solutions of sodium decylsulphonate (SDeS) and sodium dodecylsulphonate (SDoS) separated into two liquid phases at temperatures ranging between 10 and 80 °C, while temperatures >35 °C were required for sodium tetradecylsulphonate. The influence on extraction efficiency and concentrating ability of experimental variables such as hydrophobicity and concentration of surfactant, nature and concentration of analyte, hydrochloric acid concentration, time and temperature of extraction and time of equilibration and centrifugation was examined. Advantages provided by anionic surfactant-mediated extractions over the use of non-ionic surfactants (cloud point extractions) are discussed.     

A cloud point extraction approach using Triton X-100 for the separation and preconcentration of Sudan dyes in chilli powder

A CPE-HPLC (UV) method was developed for the determination of Sudan (I-IV) dyes, non-ionic surfactant Triton X-100 was used to extract and preconcentrate Sudan dyes from chilli powder prior to their determination by HPLC-UV. The separation and determination of Sudan dyes was then carried out in the HPLC-UV system with isocratic elution, and the detector was set at 500 nm. The parameters and variables that affect the extraction were investigated. Under optimum conditions: 3% of Triton X-100 (W/V), 10% of Na₂CO₃ (W/V), heat-assisted at 70 °C for 30 min. Recoveries of the Sudan dyes ranged from 80.70% to 85.45% in chilli powder by CPE method, with all the relative standard deviations of less than 3%. Limit of detection (LOD) and limit of quantification (LOQ) were in the range of 2.0-4.0 and 7.0-12.0 μg kg⁻¹ in chilli powder, respectively.     

Determination of cadmium(II) ion by atomic absorption spectrometry after cloud point extraction

In this work, cloud point extraction (CPE) technique was developed for the separation and pre-concentration of Cd(II). CPE was used with lipophilic hexadentate (N₄O₂) Schiff base ligand, L_22pysa (1, C₂₄H₂₆N₄O₂). The methodology is based upon the formation of a Cd(II)/L complex soluble in a micellar phase the non-ionic surfactant Triton X-114. This complex is then extracted into the surfactant-rich phase above its cloud point temperature. Several important variables that affect the CPE were investigated and optimized. Under the optimum experimental conditions, the calibration graph was linear over the range 1?C100?ng?mL^?1 with a correlation coefficient of 0.9997. The detection limit obtained under optimum conditions was 0.44?ng?mL^?l. The proposed method was successfully applied to the determination of Cd(II) in rice and various water samples.