Catalytic amperometric and catalytic constant-current potentiometric titrations of silver(I), palladium(II) and mercury(II)

Amperometry and constant-current potentiometry were used to follow the course of catalytic titrations of silver(I), palladium(II), and mercury(II) with potassium iodide. The Ce(IV)As(III) and Ce(IV)Sb(III) systems in the presence of sulphuric acid were used as indicator reactions. The possibilities of application of platinum, palladium, gold, graphite, and glassy-carbon indicator electrodes were investigated. Graphite appeared to be somewhat more advantageous than the other electrode materials. The effect of concentration of the components of the indicator reactions, the presence of organic solvents and acids on the shape of the catalytic titration curves was studied. Amounts of 30-3000 mug of silver(I) nitrate, 90-900 mug of palladium(II) chloride, 130-1300 mug of mercury(II) chloride, and 150-1500 mug of mercury(II) nitrate were determined with a relative standard deviation less than 1.0%. The results obtained were in good agreement with those of comparable methods. The catalytic titration method developed was applied to determination of mercury in Unguentum Hydrargyri.     

Spectrophotometric determination of mercury in environmental sample and fungicides based on its complex with o-carboxy phenyl diazoamino p-azobenzene

In the present method a new reagent o-carboxyphenyl diazoamino p-azobenzene has been synthesised for the determination of mercury spectrophotometrically. The method is based on the reaction of mercury with the reagent in alkaline medium where the reagent is in the aci-form. The purple violet coloured dye-mercury complex showed an absorption maxima at 540 nm. Beer's law is valid over the concentration range of mercury from 0.08 to 0.8 mug ml(-1) (0.08-0.8 ppm). The molar absorptivity and Sandell's sensitivity were found to be 2.22x10(5) mol(-1) cm(-1) and 0.0009 mug cm(-2), respectively. The method has been successfully applied to the determination of mercury in air, water, soil and fungicide samples.     

Determination of lead in tooth-pastes by electrothermal atomic-absorption spectrophotometry with platform atomization

Electrothermal atomic-absorption spectrometry is used for the determination of lead in tooth-pastes, by means of the graphite platform/matrix-modification technique. The method is easy to apply, has limited interferences and is more precise than conventional flame AAS. The working concentration range is up to 100 mug/1. The method is characterized by a detection limit of 0.08 mug/1. and a precision of +/-1.9 % for the sample solutions. For the tooth-pastes, the detection limit is between 1.1 and 5.4 ng/g and the precision in the range 1.8-10%.     

Determination of bismuth in biological samples using on-line flow-injection microwave-assisted mineralization and precipitation/dissolution for electrothermal atomic absorption spectrometry

An on-line automated flow injection system with microwave-assisted sample digestion for the electrothermal atomic absorption spectrometric determination of bismuth in biological materials is described. After the exposure of the sample to microwave radiation, the analyte was subject to a precipitation/dissolution process. Bismuth was precipitated with the stannite ion in basic medium and collected on the walls of a knotted coil, while the other matrix components flowed downstream to waste. The precipitate was dissolved with nitric acid and a sub-sample was collected in a capillary of a sampling arm assembly, to introduce 20 mul volumes into the graphite tube by means of positive displacement with air through a time-based injector. The analytical figures of merit were first evaluated by filling the sampling arm with a standard solution of bismuth and thereafter injecting aliquots of this solution into the atomizer. The calibration graph was linear from the detection limit (8 pg) to 1.2 ng of bismuth. The sensitivity was of 26.8 mug l(-1) for 0.2 A-s and the characteristic mass (m(o)) was of 11.8 pg/0.0044 A-s. The precision of the method, evaluated by replicate analyses of solutions containing 20 and 200 pg of bismuth, were 5.5 and 3.0% (n=10), respectively. When solutions were introduced in the flow system here described, the calibration graph was linear in the range 0.04-6.0 mug l(-1), which means that a preconcentration factor of 10 was obtained for bismuth. The precision slightly deteriorated, e.g. the replicate analysis of solutions containing 1 and 10 pg of bismuth were 7.1 and 5.3% (n=10), respectively. However, the recoveries values obtained with urine and whole blood bismuth spiked samples were over 96.5% and the agreement between observed and certified values was good.     

Preconcentration and determination of mercury(II) at a chemically modified electrode containing 3-(2-thioimidazolyl)propyl silica gel.

A mercury-sensitive chemically modified graphite paste electrode was constructed by incorporating modified silica gel into a conventional graphite paste electrode. The functional group attached to the (3-chloropropyl) silica gel surface was 2-mercaptoimidazole, giving a new product denoted by 3-(2-thioimidazolyl)propyl silica gel, which is able to complex mercury ions. Mercury was chemically adsorbed on the modified graphite paste electrode containing 3-(2-thioimidazolyl)propyl silica (TIPSG GPE) by immersion in a Hg(II) solution, and the resultant surface was characterized by cyclic and differential pulse anodic stripping voltammetry. One cathodic peak at 0.1 V and other anodic peak at 0.34 V were observed on scanning the potential from -0.1 to 0.8 V (0.01 M KNO3; v = 2.0 mV s(-1) vs. Ag/AgCl). The anodic peak at 0.34 V show an excellent sensitivity for Hg(II) ions in the presence of several foreign ions. A calibration graph covering the concentration range from 0.02 to 2 mg L(-1) was obtained. The detection limit was estimated to be 5 microg L(-1). The precision for six determinations of 0.05 and 0.26 mg L(-1) Hg(II) was 3.0 and 2.5% (relative standard deviation), respectively. The method can be used to determine the concentration of mercury(II) in natural waters contaminated by this metal.     

Direct determination of cadmium in urine using graphite furnace atomic absorption spectrometry with Zeeman-effect background correction

A procedure is described for the direct determination of cadmium in human urine using graphite furnace atomic absorption spectrometry with Zeeman-effect background correction. Except for a straightforward 1 + 1 V/V dilution of samples with 1.5% nitric acid, no matrix modifier or sample pre-treatment was necessary, thus reducing the risk of contamination. The concentration of cadmium in urine was evaluated directly from a calibration graph prepared using a metal-spiked human urine pool. In this way the time-consuming method of standard additions was avoided, permitting an increased sample throughput (120-150 samples per day; 90 s per analysis) with minimal attention of the analyst. In routine use, the precision (both within day and day to day) and limit of detection were of the order of less than 10% and 0.05 micrograms l-1 of Cd, respectively. The method is suitable for the biological monitoring of cadmium in the general population or in occupationally exposed persons.     

Evaluation of electrodeposited tungsten chemical modifier for direct determination of chromium in urine by ETAAS

The direct determination of chromium in urine by electrothermal atomic absorption spectrometry (ETAAS) using graphite tubes modified with tungsten is proposed. Modification of the graphite is made by tungsten electrodeposition over the whole surface atomizer followed by carbide formation by heating the tube inside its own furnace. For tungsten electrocoating, the graphite tube and a platinum electrode were connected to a power supply as cathode and anode, respectively, and immersed in a solution containing 2 mg of W in 0.1% v/v HNO₃. Then, 5 V was applied between the electrodes during 20 min for tungsten electrodeposition over the whole atomizer. A SpectrAA 220 Varian atomic absorption spectrometer equipped with a deuterium background corrector was used throughout. Undiluted urine (20 μl) was delivered over the tungsten-treated tube and the chromium-integrated absorbance was measured after applying a suitable heating program with maximum pyrolysis at 1300 °C and atomization at 2500 °C. With electrodeposited tungsten modifier, the tube lifetime increased up to four times when compared to previous published methods for Cr determination in urine by ETAAS, reaching 800 firings. Method detection limit (3 S.D.) was 0.10 μg l⁻¹, based on 10 integrated absorbance measurements of a urine sample with low Cr concentration. Two reference materials of urines (SRM 2670) from National Institute of Standards and Technology (NIST) were analyzed for method validation. For additional validation, results obtained from eight human urine samples were also analyzed in a spectrometer with Zeeman effect background correction.     

Liquid-phase microextration combined with liquid chromatography-electrospray tandem mass spectrometry for detecting diuretics in urine

Trace amounts of diuretics were determined in human urine by hollow fiber liquid-phase microextraction (LPME) combined with liquid chromatography-electrospray ionization-tandem mass spectrometry (LC-ESI-MS/MS) in this study. Chromatography was performed on a C(8) reversed-phase column. A 25 microL n-octanol was used to extract analytes in urine. Extraction was optimized using a pH 2 solution spiked with 0.15 g/mL NaCl for 40 min at 40 degrees C with 1010 rpm stirring. The limits of detection of diuretics in urine were 0.3-6.8 ng/mL, and linearity range was 1-1000 ng/mL. Recoveries of spiked 50 ng/mL diuretics were 97.7-102.5%. The intra-day precision and inter-day precision were 3-18% and 4-21%, respectively. The diuretics concentration profiles in patient urine were also determined. The results of this study reveal the adequacy of LPME-LC-MS/MS method for analyzing diuretics in urine and quantification limits exceed World Anti-Doping Agency requirements.     

Determination of titanium by slurry sampling graphite furnace atomic absorption spectrometry with the use of fluoride modifiers

A method for the determination of titanium in graphite furnace atomic absorption spectrometry with slurry sampling was developed. Titanium forms thermally stable carbides in the graphite tube that leads to decreased sensitivity and severe memory effects. Various fluorinating agents, BaF(2), NH(4)F, and CHF(3) (Freon-23) were therefore examined in order to reduce or eliminate these problems. Ti was determined, at various concentration levels, in certified reference materials (CRMs) using ultrasonic slurry sampling graphite furnace atomic absorption spectrometry (USS-GFAAS). The three CRMs, GBW 07601 (Human Hair Powder), GBW 07602 (Bush Branches and Leaves), and GBW 07411 (Chinese Soil), contained 2.7 microg g(-1), 95 microg g(-1), and 0.41% Ti, respectively. For comparison, determinations of Ti were made with modifiers (BaF(2) and NH(4)F) and without modifier, using 5% CHF(3) (in argon) for cleaning the graphite furnace. Good accuracy was obtained using aqueous Ti standards for calibration. A homogeneity study showed that Ti was evenly distributed in all the samples at the mg-microg level. The relative standard deviations (RSDs) obtained for the three CRMs were 16%, 11%, and 8% ( n=30). In spite of the wide range of Ti concentrations in the present samples, the same wavelength (365.4 nm) could be used for analysis by varying the slurry sample concentration. The precision was best for the material with the highest titanium content in spite of the fact that only 3 microg of sample was introduced into the furnace.     

Chromium speciation by a surfactant-coated alumina microcolumn using electrothermal atomic absorption spectrometry

A simple and convenient method has been developed for the speciation of chromium(III) and chromium(VI) in aqueous solutions using a sodium dodecyl sulphate coated alumina micro-column (1.5 cm x 5 mm i.d.) and graphite furnace-atomic absorption spectrometry (GF-AAS). Under the optimized conditions (pH 0.6, adjusted with hydrochloric acid; flow rate, 1 ml min(-1)) chromium(VI) is retained on the column and chromium(III) is collected and determined by GF-AAS. Total chromium is directly determined by GF-AAS and chromium(VI) is calculated by difference. The relative standard deviations (10 replicate analyses) at the 20 mug l(-1) level for chromium(III) and chromium(VI) and at the 40 mug l(-1) level for total chromium were 1.4%, 3.6% and 1.8%, and the corresponding limits of detection (based on 3sigma) were 0.57 mug ml(-1), 0.61 mug ml(-1) and 0.35 mug l(-1) respectively. No large interference effects have been observed from other investigated species and the method has been successfully applied to a range of water samples.     

Preconcentration speciation method for mercury compounds in water samples using solid phase extraction followed by reversed phase high performance liquid chromatography

A simple and rapid method for in situ preconcentration of inorganic and organic mercury compounds in water samples, based on solid phase extraction using dithizone immobilised on a reversed-phase C18 cartridge, has been developed. The adsorbed complexes were stable on the cartridge for at least 2 weeks. The speciation analysis of methylmercury (MeHg), phenylmercury (PhHg) and inorganic mercury (Hg (II)) were done by reversed-phase high performance liquid chromatography. The calibration graphs of MeHg, PhHg and Hg (II) were linear (r>0.999) from the detection limits (0.58, 0.66 and 0.54 ng) to 38, 25 and 26 ng of Hg, respectively. The average recoveries of MeHg, PhHg and Hg (II) from spiked samples (0.3-48.0 mug l(-1) Hg) were 98+/-3, 99+/-1 and 100+/-7%, respectively. By applying SPE procedure a 200-fold concentration of the sample was obtained.     

Determination of dysprosium and europium in sheep faeces by graphite furnace and tungsten coil electrothermal atomic absorption spectrometry

Tungsten coil atomizer atomic absorption spectrometry (TCAAS) was used to determine Dy and Eu in acid-digested faeces of sheep. These elements were used as markers in animal nutrition studies. Samples were dried, ground and decomposed using a nitric-perchloric acid mixture. The accuracy of the developed method was evaluated by graphite furnace atomic absorption spectrometry (GFAAS). The results obtained for Eu were validated at a 95% confidence level using a paired t-test. The results for Dy were not validated owing to memory effects caused by carbide formation into the graphite tube. This effect did not occur for Eu. The detection limits for Dy and Eu were 6.9 and 2.1 mug l(-1) by TCAAS, and 2.2 and 5.2 mug l(-1) by GFAAS, respectively. Relative standard deviations (R.S.D.; n=5) were 0.7-3.8 and 0.8-5.6% for Dy and Eu by TCAAS and 0.8-5.4 and 0.3-3.8% for Dy and Eu by GFAAS, respectively. The lifetime of the tungsten coil was around 200 heating cycles, which is three-fold higher than graphite tube lifetime. The proposed method can be used to determine the passage rate of feed through animal digestive tract.     

Tandem focused ultrasound (TFU) combined with fast furnace analysis as an improved methodology for total mercury determination in human urine by electrothermal-atomic absorption spectrometry

A new sample preparation procedure based on tandem (that is, different diameter probe sonicators used in the same sample treatment) focused ultrasound (TFU) for mercury separation, preconcentration and back-extraction in aqueous solution from human urine has been developed. The urine is first oxidized with KMnO₄/HCl/focused ultrasound (6 mm probe). Secondly, the mercury is extracted and preconcentrated with dithizone and cyclohexane. Finally, the mercury is back-extracted and preconcentrated again with the aid of focused ultrasound (3 mm probe). The procedure allows determining mercury by electrothermal atomic absorption spectrometry with fast furnace analysis and calibration against aqueous standards. Matrix modification is provided by the chemicals used in the sample treatment. The procedure is accomplished with low sample volume (8.5 ml). Low volume and low concentration reagents are used. The sample treatment is rapid (less than 3 min per sample) and avoids the use of organic phase in the graphite furnace. The preconcentration factor used in this work was 14. The limit of detection and the limit of quantification in urine were, respectively, 0.27 and 0.9 μg l⁻¹. The relative standard deviation of aqueous standards (n=10) was 4% for a concentration of 100 μg l⁻¹ and 5% for a concentration of 400 μg l⁻¹. Recoveries from spiked urine with inorganic mercury, methyl-mercury, phenyl-mercury and diphenyl-mercury ranged from 86 to 98%.     

Comparison of ultrasound-assisted extraction and microwave-assisted digestion for determination of magnesium, manganese and zinc in plant samples by flame atomic absorption spectrometry

In this paper, a sample preparation method based on acid extraction of magnesium, manganese and zinc from plant tissue by means of high intensity probe ultrasonication is described. Acid extracts obtained upon sonication were directly nebulised into an air-acetylene flame for fast metal determination by atomic absorption spectrometry. Parameters influencing extraction such as sonication time, ultrasound amplitude, sample mass, particle size, extractant composition and volume were fully optimised. Optimum conditions for metal extraction were as follows: a 3-min sonication time, a 30% ultrasonic amplitude, a 0.1-g sample mass, a particle size less than 50 mum, a 0.3% m/v HCl concentration in the extractant solution and a 5-ml extractant volume. Six plant samples used in the human diet were analysed, the concentration range of the three metals approximately being in the range of 1500-3000 mug g(-1) for Mg, 30-735 mug g(-1) for Mn and 20-45 mug g(-1) for Zn. Limits of detection corresponding to the ultrasound-assisted extraction method were 0.10, 1.26 and 0.65 mug g(-1) for Mg, Mn and Zn, respectively. Between-batch precision, expressed as R.S.D., was about 0.5, 1.5 and 1% for Mg, Mn and Zn, respectively. Analytical results for the three metals by ultrasound-assisted extraction and microwave-assisted digestion showed a good agreement, thus indicating the possibility of using mild conditions for sample preparation instead of intensive treatments inherent with the digestion method. The advantages and drawbacks of ultrasound-assisted extraction in respect to the microwave-assisted digestion are discussed.     

Spectrofluorimetric determination of guanethidine sulphate, guanoxan sulphate and amiloride hydrochloride in tablets and in biological fluids using 9,10-phenanthraquinone

A highly sensitive spectrofluorimetric method for the determination of some drugs of the monosubstituted guanidine derivatives in laboratory made tablets, in spiked human serum and in urine samples is presented. The method is based on the reaction of guanethidine sulphate (I), guanoxan sulphate (II) and amiloride hydrochloride (III) with 9,10-phenanthraquinone (IV) to give highly fluorescent derivatives. The linearity ranges were found to be 0.06-0.96 mug/ml for (I) and (II) and 0.04-0.28 mug/ml for (III), with relative standard deviation less than 2%. Mean percentage recoveries for tablets were found to be 99.9 +/- 1.3, 100.5 +/- 1.1 and 100.0 +/- 1.6 for I, II and III, respectively. For I and III the results are highly correlated with the B.P. methods. Using the synchronous fluorimetry, differentiation between I and II was possible. Chloroform, dichloromethane and ethyl acetate have been used to extract I, II and III, respectively from serum and urine at basic pH, followed by applying the proposed fluorimetric method. Percentage recoveries were found to be 95.7-102.2%. The limit of detection is 0.04 mug/ml for I and II and 0.02 mug/ml for III.     

Determination of erythromycin A in rat plasma and urine by high-performance liquid chromatography with chemiluminescence detection using Tris(2,2'-bipyridine)ruthenium(II)

A simple and sensitive method was developed for the determination of erythromycin A (EA), decladinosyl erythromycin A (dClEA) and erythromycin B (EB) in rat plasma and urine by high-performance liquid chromatography with electrogenerated chemiluminescence detection using Tris(2,2'-bipyridine)ruthenium(II). The recovery rates of EA, dClEA and EB were 97, 94 and 85% from rat plasma and 89, 83 and 93% from rat urine, respectively. The calibration curves were linear over the concentration ranges 0.05-5 microg/mL for plasma and 0.5-50 microg/mL for urine. The precision and accuracy for all analytes in rat plasma were < or =9.0 and -6.3-7.2%, and those in urine were < or =9.4% and -6.1-7.6%, respectively. This method proved to be a powerful tool for determination of EA, dClEA and EB concentrations in samples from rats.     

Determination of Benzo[a]pyrene in smoking-flavour agents (water-soluble liquid smoke) by second derivative constant-wavelength synchronous spectrofluorimetry

We have developed a simple, rapid, inexpensive method for the determination of benzo[a]pyrene (BP, a known carcinogen) in smoking-flavour agents (water-soluble liquid smoke; WSLS). After purification of the WSLS by a single passage through a Sep Pak C18 Plus cartridge, BP in the hexane eluate was determined by second derivative constant-wavelength synchronous spectrofluorimetry. Method precision (RSD < 6%) and recovery ( approximately 92%) were satisfactory, and the detection and quantification limits (1.05 and 2.28 mug kg(-1) respectively) indicated that the current maximum permissible concentration of BP in smoke flavourings (10 mug kg(-1)) can be monitored by this method.     

Determination of soluble chromium in simulated PWR coolant by differential-pulse adsorptive stripping voltammetry

An analytical method has been developed for the determination of dissolved chromium at concentrations less than 2 mug/l. in PWR coolant by differential-pulse adsorptive stripping voltammetry at a hanging mercury drop electrode. Concentrations above 2 mug/l. can be determined by appropriate dilution of the sample. The method is based on measurement of the current associated with reduction of a chromium(III)-DTPA (diethylenetriaminepenta-acetic acid) complex adsorbed at the surface of the mercury drop. The effects of boric acid, pH, DTPA concentration, accumulation potential and time were investigated together with the oxidation state of the chromium. No interference was observed from other transition metal ions expected to be present in PWR coolant. No alternative chemical technique of similar sensitivity was available for comparison with the results obtained in solutions containing <1 mug/l. chromium. Recoveries from simulated coolant solutions were greater than 95% and the relative standard deviations for single determinations were in the range 12-25%. The statistical limit of detection at the 95% confidence level was 0.023 mug/l. This method of analysis should prove valuable in corrosion studies and is uniquely capable of following the changes in soluble chromium concentration in PWR coolant that follow operational changes in the reactor.     

A low consumption air-segmented sequential injection vapor generation system for the determination of mercury by atomic absorption spectrometry

A sequential injection system for the determination of mercury by vapor generation atomic absorption spectrometry (VGAAS) using tetrahydoborate reductant was developed, characterized by prevention of sample and reagent mixing in the holding coil using small air segments and initiation of the vapor generation in a flow-through gas-liquid separator. Extremely small volumes of reductant of 15-30 mul (0.2-1.0% NaBH(4)) and sample acidity as low as 0.05 mol l(-1) HCl were sufficient for achieving performance similar to flow injection (FI) VGAAS systems. A sample throughput of 90 h(-1) was achieved with 400 mul samples with a precision of 2.0% RSD at 10 mug l(-1)Hg, and a detection limit of 0.1 mug l(-1) (3sigma). Reagent consumption was reduced by a factor of 25 in comparison to the FI-VGAAS system. Good agreement with the certified value was obtained for the determination of mercury in seawater in a standard reference sample.     

Evaluation of a radioimmunoassay of alpha 1-microglobulin (alpha 1-m) with simplified procedures

A newly established double antibody radioimmunoassay (RIA) was fundamentally and clinically evaluated. Original procedures were partially modified as follows: Sample volume for serum and urine was changed to 25 microliters, and thus 200 mg/l of alpha 1-m standard was prepared using 50 microliters of original standard solution (100 mg/l). The results were satisfactory in sensitivity (0.3 mg/l obtained from -2SD method), intra-assay precision with its coefficient variation (CV) ranging from 3.0 to 7.4%, interassay precision with its CV ranging from 3.0 to 10.7%, and recovery with the mean value of 102.4% in serum and 108.2% in urine respectively. There were no changes about alpha 1-m value between diluted (2 times) and undiluted with high concentration samples. Normal levels of alpha 1-m were less than 25 mg/l in serum and less than 10 mg/l in urine. The present results indicate that the determination of alpha 1-m could be very simple and useful for the most sensitive screening test for the evaluation of renal function.