Rapid method for determination of phenylurea herbicides in milk

Summary A method has been developed for the determination of thirteen phenylurea herbicide residues in milk. It involves one-step solvent extraction of the milk with methanol by ultrasonication. The extract is cleaned up on an Amberchrom resin cartridge. Reversed-phase, gradient elution, high-performance liquid chromatography with UV detection at 242 nm is used to analyse the residues. The recovery of thirteen phenylurea pesticides is quantitative, ranging from 71.4% to 97.9% for the individual herbicides investigated at concentrations around 0.05 mg kg^–1 and from 65.1% to 95.6% around 0.005 mg kg^–1. The method is not associated with any of the emulsion problems common to conventional solvent extraction, which considerably reduce the sample clean-up process compared with existing methods.     

Simultaneous quantification of chlorophenoxyacid herbicides based on time-resolved photochemical derivatization to induce fluorescence in micellar medium

In this paper a sensitive and simple method for the resolution of mixtures of chlorophenoxyacid herbicides using photochemical derivatization induced fluorescence has been described. These compounds do not show any fluorescence, hence photolysed to induce fluorescence after direct irradiation with ultraviolet light in presence of a cationic surfactant (cetyltrimethylammonium chloride). Critical variables such as the surfactant concentration and the irradiation time have been optimised for each compound using Sequential Response Surface Methodology (SRSM) by applying Doehlert designs in order to obtain maximum fluorescence intensity. The difference shown between the optimised irradiation times for the formation of the photoproducts allowed us to propose a time-resolved photoactivation method, for the simultaneous determination of binary mixtures, based on the use of different linear calibration curves established at various irradiation times depending on the mixture to be resolved. Satisfactory recoveries were obtained in the analysis of several mixtures of these herbicides at different ratios in spiked waters.     

Micellar-enhanced photochemically induced fluorescence detection of chlorophenoxyacid herbicides. Flow injection analysis of mecoprop and 2,4-dichlorophenoxyacetic acid

In this paper, a combination of a flow injection analysis (FIA) system with micellar-enhanced photochemically induced fluorescence (MEPIF) detection is presented as a powerful alternative for the rapid and sensitive analysis of chlorophenoxyacid herbicides. These compounds do not show native fluorescence but they can be photolysed into strongly fluorescence photoproducts after direct irradiation with ultraviolet light. The use of a cationic surfactant such as cetyltrimethylammonium chloride (CTAC) provides a considerable enhancement of photochemically induced fluorescence intensity and the nature of the technique allows a possible and easy adaptation to a FIA system. In this sense, parameters related to the nature of the analytical signal (pH, irradiation times, surfactant concentration) and to the FIA manifold (injection volume, flow rate and reactor length) have been optimised. Linear calibration graphs, with three replicates for each concentration value were established in the range of 0.2-5.0 mug ml(-1) for 2,4-Dichlorophenoxyacetic acid (2,4-D) and 0.1-5.0 mug ml(-1) for Mecoprop (MCPP). The IUPAC detection limits were 73.2 and 33.5 ng ml(-1) for 2,4-D and MCPP, respectively. Satisfactory recoveries were obtained in the analysis of these herbicides in spiked waters.     

Semi-automatic method for determination of total tin in rocks

Automatic equipment is used to generate tin hydride from sample solutions prepared by fusion of powdered rock with lithium metaborate followed by digestion with hydrofluoric and sulfuric acids. The evolved hydride is swept by argon into an electrically heated quartz tube atomizer. The atomic absorption of tin is measured at 224.6 nm. Oxalic acid and 1,10-phenanthroline are used to minimize interferences from iron, copper, and nickel. The detection limit of tin in the rock samples is 0.5 ppm. Results for reference rock samples agree closely with published values. A direct acid digestion procedure produces similar results for tin in many samples.     

A rapid multi-residue determination method of herbicides in grain by GC-MS-SIM

In this study, a gas chromatography-mass spectrometry method is successfully developed for the determination of 11 herbicide residues (alachlor, acetochlor, butachlor, pretilachlor, metolachlor, dimethenamid, propachlor, napropamid, propanil, atrazine, and metribuzin) in rice and soybeans. The sample is extracted with acetone-water, degreased by liquid-liquid partition, and purified through solid-phase extraction with Florisil. Experiments on 5 fortification concentrations are carried out, and the limit of determination is 0.02 mg/kg. The average recoveries of soybean samples range from 63.3% to 96.0%, and the relative standard deviations are from 2.14% to 11.2%. The average recoveries of rice samples range from 76.8% to 102% and the relative standard deviations are from 2.2% to 9.08%. The results indicate that the method developed is fast, accurate, and easy to operate. It also demonstrates that the method can meet the requirements of simultaneous determination of 11 herbicides in rice and soybeans.     

Molecularly imprinted polymers for triazine herbicides prepared by multi-step swelling and polymerization method. Their application to the determination of methylthiotriazine herbicides in river water

Uniformly-sized, molecularly imprinted polymers (MIPs) for atrazine, ametryn and irgarol were prepared by a multi-step swelling and polymerization method using ethylene glycol dimethacrylate as a cross-linker and methacrylic acid (MAA), 2-(trifluoromethyl) acrylic acid (TFMAA) or 4-vinylpyridine either as a functional monomer or not. The MIP for atrazine prepared using MAA showed good molecular recognition abilities for chlorotriazine herbicides, while the MIPs for ametryn and irgarol prepared using TFMAA showed excellent molecular recognition abilities for methylthiotriazine herbicides. A restricted access media-molecularly imprinted polymer (RAM-MIP) for irgarol was prepared followed by in situ hydrophilic surface modification using glycerol dimethacrylate and glycerol monomethacrylate as hydrophilic monomers. The RAM-MIP was applied to selective pretreatment and enrichment of methylthiotriazine herbicides, simetryn, ametryn and prometryn, in river water, followed by their separation and UV detection via column-switching HPLC. The calibration graphs of these compounds showed good linearity in the range of 50-500 pg/mL (r > 0.999) with a 100 mL loading of a river water sample. The quantitation limits of simetryn, ametryn and prometryn were 50 pg/mL, and the detection limits were 25 pg/mL. The recoveries of simetryn, ametryn and prometryn at 50 pg/mL were 101%, 95.6% and 95.1%, respectively. This method was successfully applied for the simultaneous determination of simetryn, ametryn and prometryn in river water.     

A rapid turbidimetric method for the determination of total sulphur in zinc concentrate

A rapid, simple and reliable routine method for the determination of total sulphur in zinc concentrates, roasted products and leached residues from zinc smelters is described. The method involves the fusion of the ample with sodium peroxide and sodium carbonate or routine acid decomposition and dissolution to give soluble compounds. The absorbance of the barium sulphate suspension produced by the addition of barium chloride powder to a dilute hydrochloric acid solution of the sample, containing cetyltrimethylammonium bromide solution as a dispersing agent, is measured at 420 nm. The results obtained for some zinc concentrates and other products are compared with those obtained by the conventional gravimetric barium sulphate method. Results for a reference zinc concentrate and other samples with various matrices and the results obtained with standard additions to the samples are good.     

A sequential injection cold-vapor atomic absorption method for the determination of total mercury

A sequential injection (SI) method for the determination of mercury via cold vapor atomic absorption spectrophotometry is presented. The method differs from flow injection (FI) cold vapor methods for the determination of mercury because of the simplicity of the system required for the method: one pump, one valve, a gas-liquid separator, and an atomic absorption spectrophotometer equipped with a quartz cell. Under optimal conditions, the method has the following figures of merit: a linear ¶calibration range of 1.0 to 20 μg L^–1; a detection limit of 0.46 μg L^–1; and a precision of 0.90% RSD (8 μg L^–1). The procedure allows for a sampling rate of one injection per 80 s (excluding sample pretreatment). Results from the determination of mercury in water and fish specimens are also presented. The figures of merit of the method are compared to two other SI methods for the determination of mercury.     

A sequential injection cold-vapor atomic absorption method for the determination of total mercury

A sequential injection (SI) method for the determination of mercury via cold vapor atomic absorption spectrophotometry is presented. The method differs from flow injection (FI) cold vapor methods for the determination of mercury because of the simplicity of the system required for the method: one pump, one valve, a gas-liquid separator, and an atomic absorption spectrophotometer equipped with a quartz cell. Under optimal conditions, the method has the following figures of merit: a linear calibration range of 1.0 to 20 microg L(-1); a detection limit of 0.46 microg L(-1); and a precision of 0.90% RSD (8 microg L(-1)). The procedure allows for a sampling rate of one injection per 80 s (excluding sample pretreatment). Results from the determination of mercury in water and fish specimens are also presented. The figures of merit of the method are compared to two other SI methods for the determination of mercury.     

Comparison of the Kjeldahl method and a combustion method for total nitrogen determination in animal feed

The features of the Dumas combustion method (CM) and those of the Kjeldahl method (KM) were compared as they apply to total nitrogen determination in animal feed. Both methods achieved similar repeatability (S.D., 0.11-0.38 from Kjeldahl and 0.15-0.36 from combustion) and similar intra-laboratory reproducibility (S.D., 0.11-0.39 from Kjeldahl and 0.15-0.37 from combustion). R.S.D. is always below 2%. These results show that the CM is suitable for the analysis of protein content in animal feed (5-75% protein content). The CM is recommended owing to its shorter analysis time, its cost and its environmental suitability.     

A heterogeneous immunoassay for the determination of triazine herbicides in water

Summary A heterogeneous enzyme-linked immunosorbent assay (ELISA) for the screening of triazine herbicides, e.g. atrazine in ground and surface water is reported, which is able to detect the pesticide at concentrations down to 10 ng/l without a preconcentration step.     

Pressurized-liquid extraction for determination of imidazolinone herbicides in soil

Summary A rapid and simple method has been developed for determination of imidazolinone (IMI) residues in soil. Extraction of the analytes from the soil matrix was performed with a pressurized-liquid-extraction apparatus built in this laboratory. Four different types of soil sample (clay, clay loam, sandy clay loam, and silty loam) were fortified with target compounds at levels of 10 and 50 ng g⁻¹ by a procedure which can mimic weathered soils. The samples were then dried and packed in a 25 cm×4.6 mm i. d. stainless steel column; this was placed inside a GC oven and extracted by passing an aqueous solution of KCl (0.1m, 20 mL) through the column at 90°C. Quantification of the analytes in the final extract (50-μL injection) was performed by reversed-phase liquid chromatography-mass spectrometry with a TurbolonSpray interface. Recoveries of the analytes were greater than 83% andRSD less than 7%. The method detection limit was in the 1–2.5ng g⁻¹ range in analysis by time-scheduled selected-ion monitoring (SIM).     

Enzymatic reverse FIA method for total phenols determination in urine samples

A reverse flow injection spectrophotometric enzymatic method is proposed to quantify total phenols in urine samples. The polyphenol oxidase (PPO; EC 1.14.18.1) obtained as a crude extract from sweet potato root (Ipomoea batatas) was used as enzymatic catalyze. The detection limit, the sample throughput and relative standard deviation were 7.7 mg l⁻¹ of total phenols, 49 h⁻¹ and 0.9%, respectively. The method was applied to real samples and a recovery study was carried out in order to its validation.