Adsorptive stripping voltammetry of a fentanyl derivative at a mercury electrode

In a supporting electrolyte of NaOH, a pair of cathodic and anodic peaks of N,N'-diphenyl-N,N'-bis(1-phenylmethyl-4-piperidinyl)-ethanediamide (DBPPE) is found by cyclic voltammetry at a Hg electrode. The cathodic and anodic peak potentials are -1.53 and -1.46 V (vs. Ag/AgCl), respectively. The cathodic peak shows adsorptive characteristics when the concentration of DBPPE is low and the preconcentration time is long. The adsorbed species is most probably the DBPPE neutral molecule. The method for measuring trace amount of DBPPE by adsorptive stripping voltammetry is established and the detection limit can reach 5 x 10(-9)M with a 6-min preconcentration.     

核黄素丁酸酯在汞电极上的吸附伏安特性及其反应速率常数的测定

循环伏安法表明,在ＮａＯＨ底液中核黄素丁酸酯（ｒｉｂｏｆｌａｖｉｎｅ　ｔｅｔｒａｂｕｔｙｒａｔｅ,ＲＴ）在汞电极上有一对氧化还原峰,其峰电位Ｅｐｃ＝Ｅｐａ＝－０．６４Ｖ（ｖｓ．Ａｇ／ＡｇＣｌ）。本文用多种电化学手段对ＲＴ的吸附特性进行了较详细的研究。吸附粒子为ＲＴ中性分子,测得ＲＴ在汞电极上的饱和吸附量为５．４２×１０－１１ｍｏｌ／ｃｍ２,每个ＲＴ分子所占电极面积为３．０６ｎｍ２,ＲＴ在悬汞电极上的吸附符合Ｆｒｕｍｋｉｎ等温式。测得吸附系数β＝４．６×１０５,吸引因素γ＝ １． １０,吸附自由能△Ｇ°＝－ ３２． ３０ ｋＪ／ｍｏｌ。本文还用循环伏安法研究了ＲＴ的电极反应动力学性质,测定了其在汞电极上的反应速率常数。     

镍(Ⅱ)-硫代氨基脲体系的吸附伏安法研究

本文用计时电量法探讨了镍(Ⅱ)-硫代氨基脲在悬汞电极上吸附还原的机理,表明其吸附模式为直接吸附,吸附形体为Ni(T₃C)₂²⁺。利用Ni(TSC)₂²⁺络合物的吸附性,可采用预先将Ni(TSC)₂²⁺吸附富集在悬汞电极上然后再进行电位扫描的吸附伏安法来测定痕量Ni.线性扫描伏安法和微分脉冲伏安法的检测下限可分别达到1×10^-8mol/L和4×10^-9mol/L。     

罂粟碱的吸附伏安行为的研究

在ＮＨ３－ＮＨ４Ｃｌ底液中，罂粟碱在汞电极上有一一线性扫描还原峰，峰电位Ｅｐｃ＝－１．４４（ｖｓ．ｓａｔ．Ａｇ／ＡｇＣｌ）。该峰具有明显的吸附性。当ＰＡＰ浓度较小时，扫速较快，搅拌富集时间较长时，电极反应完全为吸附态的ＰＡＰ的还原所控制。     

铋(Ⅲ)-8-羟基喹啉-5-磺酸的吸附伏安法研究

探讨了8-羟基喹啉-5-磺酸(HQSA)和络合物Bi(Ⅲ)-HQSA的电化学性质,特别是它们在汞电极上的吸附性。在pH=7.0的磷酸盐底液中,Bi(Ⅲ)-HQSA有一灵敏还原峰,为反应物弱吸附,E_pc=-0.44V(vs.饱和Ag/AgCl)。据此建立了吸附伏安法测定铋的新方法,检测限为2.0×10^-9mol/L,线性范围5.0×10^-9～1.0×10^-6mol/L。     

Chelate Adsorption for Trace Voltammetric Determination of Xanthosine 5′-Monophosphate and Xanthosine 5′-Diphosphate

Square-wave cathodic adsorptive stripping voltammetry based on adsorptive accumulation is a very sensitive technique for the trace determination of xanthosine 5′-monophosphate (5′-XMP) and xanthosine 5′-diphosphate (5′-XDP). The determination is based on the strong interaction of the adsorption of xanthosine phosphate compounds on a mercury electrode surface, forming Hg(II)-xanthate. The cathodic reduction of the accumulated Hg(II)-xanthate complex provides the basis for direct stripping measurements of the investigated biological compounds at subnanomolar concentration levels. Moreover, controlled adsorptive accumulation of the Cu(II) complex of xanthosine phosphate is also reported to assay trace amounts of xanthosine phosphate. The height of the sharp chelate peak of adsorbed Cu(II)-xanthate, coupled with the flat baseline, facilitates measurements at nanomolar and submicromolar concentration levels. The adsorption and the redox behaviour of the investigated complexes are indicated by cyclic voltammetry. Experimental and instrumental parameters for the quantitative determination were optimized. Statistical analysis of the calibration curve data is also included.     

卡可西灵在汞电极上的电化学行为和吸附特性

在ＨＡｃ－ＮａＡｃ底液中，卡可西灵在汞电极上有两个还原峰，第一峰峰电位Ｅｐｃ１＝０．０４Ｖ（ｖｓ．Ａｇ／ＡｇＣｌ），为２电子转移的可逆过程；第二峰峰电位Ｅｐｃ２＝－０．３９Ｖ，为４电子转移的不可逆过程，第二峰具有明显的吸附性。本文探讨了该吸附特性，认为吸附型体为中性分子，属于不可逆吸附体系。测得其电极反应动力学参数αｎα和卡可西灵在汞电极上的饱和吸附量，估计了每个卡可西灵分子所占的面积，建立了测定     

Indirect measurement of brucine by adsorptive stripping voltammetry at mercury electrode

After reaction with nitric acid, brucine can be transformed into cacotheline, and then measured indirectly by adsorptive stripping voltammetry. This method is based on the adsorptive accumulation of cacotheline at a hanging mercury drop electrode, followed by cathodic linear sweep voltammetry. The cathodic peak potential is about -0.35 V (vs. saturated Ag AgCl ). The detection limit of 2.0 x 10(-9) M is obtained under optimized conditions. The electrochemical behaviour of cacotheline and the mechanism of the electrode reactions are discussed.     

阿西美辛的吸附伏安特性

在乙酸 -乙酸钠 ( p H 4.2 0 )底液中 ,阿西美辛 ( ACE)在汞电极上有一线性扫描还原峰 ,峰电位 Epc=- 1 .1 8V( vs.Ag/Ag Cl) ,该峰具有明显的吸附性。吸附粒子为 ACE中性分子 ,测得 ACE在汞电极上的饱和吸附量为 1 .1 9× 1 0 - 10 mol/cm2 ,每个 ACE分子所占电极面积为 1 .43nm2 ,ACE在悬汞电极上的吸附符合 Frumkin等温式。测得吸附系数β =1 .2 9× 1 0 6 ,吸引因素γ =1 .0 4 ,电子转移数 n为 2 ,不可逆吸附的电子转移系数α为 0 .86,表面电极反应速率常数 ks=0 .32 /s。建立了吸附伏安法测定 ACE的最佳条件 ,检出限为 1 .0× 1 0 - 9mol/L     

Adsorptive stripping measurements of germanium(IV) in the presence of pyrogallol

The adsorptive stripping voltammetric determination of germanium(IV) based on the adsorptive accumulation of the germanium(IV)-pyrogallol complex on a hanging mercury drop electrode is reported. The reduction current of the adsorbed germanium complex is measured by differential-pulse cathodic stripping voltammetry. The peak potential is at -0.42 V vs. Ag AgCl (saturated KCL). The effects of various parameters (ligand concentration, supporting electrolytic composition and concentration, accumulation potential and collection time) on the response are discussed. With controlled accumulation for 3 min, the detection limit is 1.2 x 10(-9) M germanium. The relative standard deviation (at 1.2 x 10(-8) M germanium) is 3.6%. Possible interferences are evaluated. The applicability of the method to the determination of germanium(IV) in ore samples was also successfully carried out.     

Differential pulse cathodic stripping voltammetry of the copper complexes of glycyl-L-histidyl-glycine at a hanging mercury drop electrode

The behaviour of the copper complexes of glycyl-L-histidyl-glycine (GHG) was investigated using cyclic voltammetry and differential pulse voltammetry after their adsorptive accumulation on the surface of a hanging mercury drop electrode (HMDE). The nature of the observed cathodic and anodic peaks was established and optimum conditions were found for the differential pulse cathodic stripping voltammetric detemination of GHG at the 1 x 10(-8)M concentration level using adsorptive accumulation at -0.20 V vs. Ag/AgCl reference electrode and the cathodic stripping peak around -0.4 V (pH 8.3). This peak corresponds to the reduction of the Cu(I)-GHG complex formed at the HMDE surface as an intermediate in the reduction of Cu(II)-GHG to Cu(O)amalgam.     

Differential pulse and square-wave cathodic stripping voltammetry of xanthine and xanthosine at a mercury electrode.

The surface activity of xanthine (Xan) and xanthosine (Xano) at a hanging mercury drop electrode (HMDE) was studied using out-of-phase ac and cyclic dc voltammetry. The results show that Xan and Xano were strongly adsorbed and chemically interacted with the charged mercury surface, which is the prerequisite step for applying the cathodic adsorptive stripping voltammetric determination of such biologically important compounds. Differential pulse cathodic adsorptive stripping voltammetry (DPCASV) and square-wave cathodic adsorptive stripping voltammetry (SWCASV) were applied for the ultratrace determination of Xan and Xano compounds. Moreover, a rapid and sensitive controlled adsorptive accumulation of Cu(II) complexes of both compounds provided the basis of a direct stripping voltammetric determination of such compounds to submicromolar and nanomolar levels. Operational and solution conditions for the quantitative ultratrace determination of Xan and Xano were optimized in absence and presence of Cu(II). The calibration curve data were subjected to least-squares refinements. The effects of several types of inorganic and organic interfering species on the determination of Xan or Xano were considered.     

Adsorptive stripping voltammetric analysis of 2,4,6-tri(2′pyridyl)-1,3,5-triazine at a mercury electrode

The redox behaviour of adsorbed species of 2,4,6-tri(2′-pyridyl)-1,3-5-triazine (TPTZ) at the surface of a mercury electrode was examined using cycling voltammetry. Based on the adsorption and accumulation of TPTZ at the charged mercury surface cathodic adsorptive stripping voltammetry (CSV) is applied for the trace determination of TPTZ using a differential pulse (DP) technique. Experimental and operational parameters for the quantitative analysis of TPTZ are optimized and the detection limit was found to be 3×10⁻⁹ mol/l. The effect of some interferences, e.g. organic compounds, cations and anions, are investigated.     

Adsorptive and electrochemical behaviors of estradiol valerate at a mercury electrode

It was found that estradiol valerate could be adsorbed at a mercury electrode under open circuit. The adsorptive and electrochemical behaviors of estradiol valerate on a static mercury electrode were investigated by cyclic voltammetry, linear scan voltammetry and chronocoulometry. Based on this, a sensitive and selective adsorptive stripping square-wave voltammetric method was developed for the determination of estradiol valerate based on the optimization of solution conditions and electrochemical parameters. It was found that in a Britton-Robinson buffer solution containing 18% alcohol (pH 9.5), estradiol valerate gave a sensitive reductive peak at potential -1.29 V (vs. SCE) and the peak current was linear with the concentration of estradiol valerate in the range 2.0 x 10(-8)-2.5 x 10(-6) mol L-1. The detection limit was 1.1 x 10(-8) mol L-1. The interference of some common steroid estrogens was examined and it was found that they did not interfere in the determination of estradiol valerate in the present system.     

Adsorptive stripping voltammetric behaviour of copper complexes of some heterocyclic azo compounds

Controlled adsorptive accumulation of copper complexed with TAN, TAC, TAR and TAM (heterocyclic azo-compounds) on a static mercury drop electrode provides the basis for the direct stripping measurement of this element in the nanomolar concentration level. The ligand TAN exhibited great sensitivity and better separation of the peak current of the ligand in relation to the complex. The reduction current of adsorbed complex ions of copper is measured by linear scan cathodic stripping voltammetry, preceded by a period of accumulation of a few minutes. The peak potential is at approximately -0.37 V vs. Ag/AgCl. Optimal experimental parameters were found to be a TAN concentration of 1 x 10(-5)M, an accumulation potential of -0.22 V, and a solution pH of 3.7 (acetate buffer). The detection limit is 0.8nM after a 5-min accumulation with a stirred solution, and the response is linear up to 50 mug/l. Many common cations and anions do not interfere in the determination of copper. The interference of titanium is eliminated by addition of fluoride ion. Results are reported for a fresh water sample.     

Cathodic adsorptive stripping voltammetric determination of nalidixic acid in pharmaceuticals, human urine and serum

The quinolone antibacterial agent nalidixic acid (NAL) was studied by cyclic voltammetry (CV) and cathodic adsorptive stripping voltammetry (CASV). A sensitive method is described for the determination of NAL in its pure form, dosage forms and biological fluids. Controlled adsorptive accumulation of NAL on a hanging mercury drop electrode provides the basis for the direct stripping measurement of that compound in the nanomolar concentration level. Different variables were studied and optimized. The proposed method depends upon the voltammetric activity of NAL in Britton-Robinson buffer, whereby a well-defined cathodic peak is produced at pH 5.0 in presence of NO(3)(-). The calibration graph to determine NAL was linear in the range 7.4x10(-8)-2.5x10(-5) M by CASV. CAS voltammetry has been proved to be advantageous over a liquid chromatographic (LC) technique, allowing to detection limit signal to noise ratio, (s/n=3) of 0.766 ng ml(-1) (3.3x10(-9) M) NAL to be reached. The relative standard deviation (n=5) was 5.2% at concentration level of 1.0x10(-7) M NAL. The degree of interference from coexisting metal ions on the CASV signal for NAL was evaluated. The method was applied to two different commercial pharmaceutical products (Negram tablets and suspension) with very good recoveries. It was also shown that the method was successfully applied to the determination of NAL in human urine and blood serum. Mean recoveries were 98.8+/-0.3 and 98.9+/-0.41%, respectively.     

Adsorptive stripping voltammetric analysis of 2,4,6-tri(2′pyridyl)-1,3,5-triazine at a mercury electrode

The redox behaviour of adsorbed species of 2,4,6-tri(2-pyridyl)-1,3-5-triazine (TPTZ) at the surface of a mercury electrode was examined using cycling voltammetry. Based on the adsorption and accumulation of TPTZ at the charged mercury surface cathodic adsorptive stripping voltammetry (CSV) is applied for the trace determination of TPTZ using a differential pulse (DP) technique. Experimental and operational parameters for the quantitative analysis of TPTZ are optimized and the detection limit was found to be 3×10^–9 mol/l. The effect of some interferences, e.g. organic compounds, cations and anions, are investigated.     

Determination of the pesticide Chlorpyrifos by cathodic adsorptive stripping voltammetry

The adsorption behavior and differential pulse cathodic adsorptive stripping voltammetry of the pesticide Chlorpyrifos (CP) were investigated at the hanging mercury drop electrode (HMDE). The pesticide was accumulated at the HMDE and a well-defined stripping peak was obtained at –1.2 V vs Ag/AgCl electrode at pH 7.50. A voltammetric procedure was developed for the trace determination of Chlorpyrifos using differential pulse cathodic adsorptive stripping voltammetry (DP-CASV). The optimum working conditions for the determination of the compound were established. The peak current was linear over the concentration range 9.90 × 10^–8– 5.96 × 10^–7 mol/L of Chlorpyrifos. The influence of diverse ions and some other pesticides was investigated. The analysis of Chlorpyrifos in commercial formulations and treated waste water was carried out satisfactorily     

Determination of Trace Amounts of Copper by Adsorptive Stripping Voltammetry

ABSTRACT

A technique is presented for the determination of trace amounts of copper(II) by adsorptive cathodic stripping voltammetry. The procedure is based on adsorptive accumulation of copper(II)-Alizarin Red S (ARS) complex on a hanging mercury drop electrode, followed by a stripping voltammetric measurement of the reduction current of the adsorbed complex at -0.16 V (vs. Ag/AgCl). The height of the copper -ARS reduction peak is linearly dependent upon the copper(II) concentration between 0.2-15 and 15-500 ng.ml^?1. The detection limit of the technique is 0.05 ng.ml^?1 copper(II) for a collection time of 1 minute. The method is free from most interferences. The procedure has been successfully applied to the determination of trace amounts of copper(II) in some analytical grade salts.     

Trace amounts determination of lead,zinc and copper by adsorptive stripping voltammetry in the presence of dopamine

A selective and sensitive method for simultaneous determination of lead, zinc and copper by adsorptive differential pulse cathodic stripping voltammetry is presented. The method is based on adsorptive accumulation of the complexes of Pb(II), Zn(II), and Cu(II) ions with dopamine onto hanging mercury drop electrode (HMDE), followed by reduction of adsorbed species by differential pulse cathodic stripping voltammetry. The effect of experimental parameters such as pH, dopamine concentration, accumulation time and potential and scan rate were examined. Under the optimized conditions, linear calibration curves were established for the concentration of Pb, Zn, and Cu in the ranges of 5–150, 5–250, and 1–150 ng/mL, respectively. Detection limits of 0.06, 0.25, and 0.04 ng/mL for Pb, Zn, and Cu were obtained. An application of the proposed method is reported for the determination of these elements in some real samples such as natural waters and alloys.