MPT-AES测定奶粉中的Ca和Fe

用微波等离子体(MPT)为激发光源,氩气为等离子体工作气体,用气动雾化进样,采用标准曲线法研究了微波等离子体炬原子发射光谱法(MPT-AES)测定奶粉中Ca、Fe的方法。详细考察了溶液中HCl浓度、HNO3浓度、微波前向功率、载气流量、工作气流量等实验参数对测定的影响,同时考察了共存元素钠、镁、锌对钙和铁发射强度的影响。     

溶胶-凝胶法制备Fe2(MoO4)3超微粒子催化剂

以硝酸铁和钼酸铵为原料，采用溶胶－凝胶法和微波加热技术制备了F 2(MoO4)3超微子催化剂，使用DTA－TG，IR，XRD以及BET比表面测试等手段，考察了制备条件对复合氧化物超微粒子形成、晶相和比表面积的影响。同时测试了该样品对甲苯选择性氧化制苯甲醛的催化性能。结果表明：制备Fe2(MoO4)2超微粒子的适宜条件为：初始溶液pH=1.0,mol柠檬酸：mol(铁＋钼）＝0．4。在此条件下制得的干凝胶，经微波加热处理后粒子的比表面积为36.4m^2/g，粒径约为35nm。在由甲苯气相选择氧化制苯甲醛的反应中表现出较高的催化活性。     

微波消解和直接溶解进样法测定板蓝根颗粒剂中六种金属元素的比较研究

目的使用微波消解和热酸溶液直接溶解板蓝根颗粒,运用火焰原子吸收光谱法测定这两种溶液中Fe、Zn、Cu、Mg、Ca和Mn 6种金属元素的含量。方法分别采用浓HNO3湿法微波消解和直接溶解板蓝根颗粒样品,用原子吸收分光光度计测定上述样品中6种金属元素含量。结果所测定的板蓝根颗粒中含有丰富的金属元素,两种前处理方法测定的结果相差很小。采用此法回收率在92.0%~110.0%之间,样品相对偏差小于3%。结论板蓝根颗粒中金属元素可作为人体元素的重要补充。     

微波消解样品-电感耦合等离子体原子发射光谱法测定铅精矿中铅、砷、镉、汞

采用微波消解样品-电感耦合等离子体原子发射光谱法同时测定铅精矿中主体元素铅及有毒有害元素砷、镉、汞的含量。0.20g试样置于消解罐中,先后加入硝酸9mL、盐酸3mL、氟硼酸2mL及过氧化氢2.5mL,密闭罐盖按设定的微波消解程序进行消解。试验选择铅、砷、镉和汞的分析线分别为220.351,189.042,228.802,184.950nm以消除基体干扰。铅、砷、镉、汞的检出限分别为16.0,2.2,0.4,0.8μg.g-1。方法用于铅精矿标准样品(GBW 07617)和铅精矿实际样品分析,此方法的测定值与认定值及原子吸收光谱法或原子荧光光谱法的测定值相一致。方法的相对标准偏差(n=10)在0.15%～3.9%之间。     

Determination of thirteen common elements in food samples by inductively coupled plasma atomic emission spectrometry: comparison of five digestion methods

Five sample digestion procedures were evaluated for the determination of Al, B, Ca, Cu, Fe, K, Mg, Mn, Na, P, S, Sr, and Zn in food samples by inductively coupled plasma atomic emission spectrometry. The 5 procedures include dry ashing at 500 degrees C, wet digestion with HNO3-HClO4, microwave digestion with HNO3, microwave digestion with HNO3-H2O2, and microwave digestion with HNO3-H2O2-HF. For microwave digestion with HNO3-H2O2-HF, silicon (IV) oxide was used to eliminate the excess HF, making it possible to determine total Al, B, and other common elements accurately and simultaneously. Seven National Institute of Standards and Technology standard reference materials (SRMs) were analyzed to compare the recovery of 13 elements with above digestion procedures. The results demonstrated that the microwave digestion procedure with HNO3-H2O2-HF yielded the best recoveries for all 13 elements in the selected SRMs. The determined concentrations of most elements were close for all 3 microwave digestion procedures with the exception of Al in oyster tissue, bovine liver, and spinach. Notably, the wet digestion with HNO3-HClO4 is the simplest and the most effective procedure for the selected elements except Al and B. Although there are several concerns with the dry ashing procedure, it might be a preferable procedure for those analyses where only nonvolatile elements are to be determined and the concentrations of the elements are low.     

Sample pre-treatment methods for the trace elements determination in seafood products by atomic absorption spectrometry

Different sample pre-treatments for seafood products have been compared with determine trace elements (As, Cd, Cr, Cu, Fe, Mg, Mn, Ni, Pb, Se and Zn) by flame atomic absorption spectrometry (FAAS) and electrothermal atomic absorption spectrometry (ETAAS). Classic pre-treatments as microwave assisted-acid digestion and the slurry sampling technique were compared with new procedures such as microwave energy or ultrasound energy assisted-acid leaching process and enzymatic hydrolysis methodologies based on the use of pronase E. The methods were applied to DORM-1 and DOLT-1 reference materials with certified contents for the studied elements. The Student-Newman-Keuls (SNK) method was used to compare with element concentration means obtained with each sample pre-treatment and also the certified concentration means in both reference materials. Multivariate techniques such as principal components analysis (PCA) was also applied to comparative purposes.     

微波消解-石墨炉原子吸收光谱法测定蜂胶中铅

提出了石墨炉原子吸收光谱法测定蜂胶中铅含量的方法,样品采用微波消解,用磷酸二氢铵基体作为改进剂,方法的精密度(n=7)在1.1%～1.3%之间,回收率在91.8%～101.9%之间。     

微波消解样品-火焰原子吸收光谱法测定淡竹叶中痕量元素

产自3个不同地区的淡竹叶样品用硝酸经微波辅助消解,采用火焰原子吸收光谱法测定所得样品溶液中锌、铁、铜、锰、钾、钙、钠、镁、镍、铅、铬、钴、铝和硒等14种痕量元素的含量。14种元素的质量浓度在一定的范围内均与其吸光度呈线性关系。以1#样品为基体,加入适量9种痕量元素的标准溶液做方法的回收试验,测得回收率在98.1%～108.0%之间,测定值的相对标准偏差(n=5)均小于8%。     

Multielement Analysis of Whole Blood Using a Capacitively Coupled Microwave Plasma Atomic Emission Spectrometer

A capacitively coupled microwave plasma atomic emission spectrometer (CMP-AES) has been evaluated as a means for the direct analysis of several of the primary and trace elements in whole blood. A tungsten filament spiral electrode was used with the CMP, and whole blood samples were deposited on the electrode and subsequently dried, ashed, and atomized. The emission was measured with a spectrometer and a charge-coupled-device detector. A sample size of only 2 μl was required and the time for each sample run was under 4 min. This method has a wide dynamic range, allowing the determination of both the primary elements in blood and elements present in trace quantities. Potassium, sodium, lithium, magnesium, manganese, and zinc were studied. Good linearity was observed and the concentration levels obtained for these elements were consistent with literature values. The primary advantages of this method are that no sample pretreatment or dilution is required, the instrument cost is low, and the method is capable of simultaneous multielement analysis on small, discrete samples.     

Experimental and theoretical investigation of the reaction NH(X3Sigma-) + H(2S)-->N(4S) + H2(X1)Sigmag +)

The rate coefficient of the reaction NH(X (3)Sigma(-)) + H((2)S)-->(k(1a) )N((4)S) + H(2)(X (1)Sigma(g) (+)) is determined in a quasistatic laser-flash photolysis, laser-induced fluorescence system at low pressures (2 mbar< or =p< or =10 mbar). The NH(X) radicals are produced via the quenching of NH(a(1)Delta) (obtained by photolyzing HN(3)) with Xe whereas the H atoms are generated in a H(2)He microwave discharge. The NH(X) concentration profile is measured under pseudo-first-order condition, i.e., in the presence of a large excess of H atoms. The room temperature rate coefficient is determined to be k(1a) = (1.9 +/- 0.5) x 10(12) cm(3) mol(-1) s(-1). It is found to be independent of the pressure in the range considered in the present experiment. A global potential energy surface for the (4)A(") state is calculated with the internally contracted multireference configuration interaction method and the augmented correlation consistent polarized valence quadruple zeta atomic basis. The title reaction is investigated by classical trajectory calculations on this surface. The theoretical room temperature rate coefficient is k(1a) = 0.92 x 10(12)cm(3) mol(-1) s(-1). Using the thermodynamical data for the atoms and molecules involved, the rate coefficient for the reverse reaction, k(-1a), is also calculated. At high temperatures it agrees well with the measured k(-1a).     

用低功率微波热雾化器与十字交叉气动雾化器作为ICP-AES进样装置的比较

在 ICP- AES中 ,最常用来引入液体样品的方法是雾化法 .因此 ,雾化器雾化效率的高低直接影响到 ICP- AES的分析性能 [1,2 ] .目前 ,在 ICP- AES中最常用的雾化器是气动雾化器 (PN) .它的优点是简单、稳定性好 ;缺点是产生的雾滴的直径范围很宽 (一般为 1～ 50 μm) ,进样效率低 ,一般仅为 1 %～3% [3] .热雾化器是近年发展起来的一种雾化效率较高的雾化法 ,已被越来越多地用于 ICP- AES[4～ 7] .热雾化法的雾化原理与同轴气动雾化法类似 ,不同之处在于 :对于热雾化法来说 ,(1 )雾化所需的气体来自于液体样品本身而不是外加的惰性…     

表面修饰磷钼酸铵纳米微粒的合成及摩擦学行为研究

在醇-水体系中采用同阴离子共沉淀法合成了季铵盐修饰的(NH4)3PMo12O40纳米微粒,以TEM、 XRD、 FTIR、 TGA、 DSC等多种分析手段表征了这种纳米微粒的形貌和结构,在四球试验机上考察了它们的摩擦学性能.结果表明所合成的杂多化合物具有Keggin骨架结构,微粒粒径约20 nm,在有机溶剂中可良好分散,作为一类新型润滑油添加剂,具有良好的抗磨性能.     

Ce_2Mo_3O_(12)超微粒子的制备及催化性能

以硝酸铈和钼酸铵为原料 ,采用溶胶 -凝胶法和微波加热技术制备了Ce2 Mo3 O12 超微粒子催化剂 ,使用DTA -TG ,IR ,XRD以及BET比表面测试等表征手段 ,考察了制备条件对复合氧化物超微粒子形成 ,晶相和比表面积的影响 .同时 ,测试了该样品对甲苯选择性氧化制苯甲醛反应的催化性能 .结果表明 :制备Ce2 Mo3 O12 超微粒子的适宜条件为 :初始溶液pH =1.0 ,柠檬酸 / (铈 +钼 )摩尔比等于 0 .4 ,在此条件下制得的干凝胶 ,经微波加热处理后 ,粒子的比表面积为 35 .8m2 /g ,粒径约为 4 0nm .在由甲苯气相选择氧化制苯甲醛的反应中表现出较好的催化活性     

Determination of metal concentrations in lichen samples by inductively coupled plasma atomic emission spectroscopy technique after applying different digestion procedures

Three digestion procedures have been tested on lichen samples for application in the determination of major, minor and trace elements (Al, Ca, Cd, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, V and Zn) in lichen samples collected in Aegean Region of Turkey by inductively coupled plasma atomic emission spectrometer (ICP-AES). The acid mixture of concentrated HNO₃, H₂O₂ and HF were used. The instrument was optimized using lichen matrix considering RF power, nebulizer pressure, auxiliary flow rate and pump rate. The accuracy of the overall analyses was first estimated by analysis of two certified reference materials. Good agreement between measured and reference values were found for almost all elements. As the second way of determining the accuracy, results obtained from independent analytical techniques (ICP-AES and instrumental neutron activation analysis (INAA)) were compared for all elements by analyzing real samples. Correlation coefficients of two techniques for the elements ranged between 0.70 (Mg) and 0.96 (Fe). Among the three digestion systems, namely microwave, open vessel and acid bomb, microwave digestion system gave the best recovery results. The method detection limit (MDL) was computed using reagent blanks of microwave digestion system since it provides cleaner sample preparation. Detection limit is adequate for all elements to determine the elements in lichen samples. The precision was assessed from the replicate analyses of reagent blanks of microwave digestion system and was found to be less than 1.5% relative standard deviation (R.S.D.).     

Microwave digestion of fish tissue for selenium determination by differential pulse polarography

In KIO(3)NH(3)NH(4)Cl medium, the selenium complex Se(O)SO(2-)(3), resulted from the reaction of selenite and sulphite in acid solution, gave a catalytic wave, which was applied to the determination of selenium in fish by differential pulse polarography. The sample was decomposed using the HNO(3)/H(2)SO(4)/H(2)O(2) digestion mixture in a closed PTFE digestion vessel with microwave heating. The detection limit was 0.06 mug/dm(3). The calibration curve was linear up to 8 mug/dm(3). Selenate present was reduced with hot hydrochloric acid to selenite. The recoveries of the selenite and selenate in two spiked samples investigated ranged from 91 to 104%. The NIES CRM No. 6 mussel was analyzed and the results obtained agreed well with the reference value (reference value: 1.5 mug/g; found: 1.43 +/- 0.05 mug/g). The results obtained by differential pulse polarography were in good agreement with those found by hydride generation atomic absorption spectrometry.     

微波消解–石墨炉原子吸收法测定药食两用中药材中的铅

建立测定药食两用中药材中铅含量的微波消解–石墨炉原子吸收光谱分析方法。样品经微波消解后,以2%磷酸二氢铵为基体改进剂,用石墨炉原子吸收法测定药食两用中药材中的铅含量。在2~40μg/L范围内,铅的质量浓度与吸光度呈良好的线性关系,线性相关系数r大于0.999,检出限为5μg/kg。加标回收率为94.0%~105.5%,测定结果的相对标准偏差小于5.0%(n=6)。该方法操作简便快速,准确度较高,基体干扰小,适合药食两用中药材中铅的检测。     

一种新型的ICP-AES用低功率微波热雾化系统

热雾化法自问世以来 [1 ,2 ] ,就以其较高的雾化效率及传输效率受到学者们的普遍重视 .最近 Bordera等[3] 提出了一种新的热雾化系统 (该系统采用聚焦微波炉作热雾化系统中液体样品的热源 ,即微波热雾化系统 ,简称 MWTN) ,同时还考察了实验变量对雾滴粒径分布的影响 ,并预期 MWTN具有较高的雾化效率 .本文所提出的热雾化系统与 Bordera等所建立的 MWTN系统在原理上虽然相同 ,但由于采用了新的微波器件 ,所需功率大大降低 ,因此 ,是一种新的低功率 MWTN系统 .在本实验中 ,我们对酸的浓度、载气流量、样品提升量等参数对 Mg的发射强度…     

A facile synthesis of uniform NH4TiOF3 mesocrystals and their conversion to TiO2 mesocrystals

Uniform mesocrystals of TiO2 (anatase) have been prepared from mesocrystals of NH4TiOF3. NH4TiOF3 was synthesized from an aqueous solution containing (NH4)2TiF6 and H3BO3 in the presence of a nonionic surfactant Brij 56, Brij 58, or Brij 700, at low temperatures. The exterior shapes of NH4TiOF3 mesocrystals can be tuned by adjusting the reagent concentration, reaction time, reaction temperature, and rate of stirring. The formation of the NH4TiOF3 mesocrystals proceeds via a self-assembly process involving nonclassical crystal growth. By sintering in air at 450 degrees C, or washing with H3BO3 solution at ambient temperatures, the NH4TiOF3 mesocrystals can be converted to mesocrystals of TiO2 (anatase), and the original architecture is retained.     

微波消解-GFAAS法测定菠菜粉和蘑菇粉中微量镉的研究

应用微波消解-石墨炉原子吸收光谱法对菠菜粉和蘑菇粉中微量镉的含量进行测定。菠菜粉和蘑菇粉经HNO3+H2O2微波消解体系消解后,采用磷酸二氢铵作为基体改进剂,灰化温度为900℃,原子化温度为1 350℃,镉含量在0~2 ng/mL范围内与吸光度呈线性关系,线性相关系数为0.999 4,检出限为0.02 mg/kg。该法测定结果的相对标准偏差小于4%(n=6),加标回收率为96.7%~103.2%。     

微波消解-电感耦合等离子体原子发射光谱法测定膨润土中6种元素

膨润土样品用硝酸、盐酸、氢氟酸在超级微波消解仪中进行消解,消解完毕后加入高氯酸加热除去有机物、碳类。采用电感耦合等离子体原子发射光谱法测定样品溶液中钙、镁、磷、锰、铁、钛等6种元素的含量。6种元素的质量浓度在一定范围内与其对应的发射强度呈线性关系,方法的检出限(3s)为0.001~0.009mg·L-1。方法应用于膨润土样品的分析,测定值的相对标准偏差(n=11)为0.74%~2.7%。用标准加入法做方法的回收试验,测得回收率为96.0%~102%,方法测定值与X射线荧光光谱法测定结果相符。