Formation and structures of mercury complexes of 18-membered unsaturated and saturated thiacrown ethers

The complexation of 18-membered unsaturated thiacrown ether, 18-UT-6, with 1 equiv of HgCl(2) in acetone afforded mercury complex Hg(II)(18-UT-6)Cl(2). The complexations of 18-membered saturated thiacrown ether, 18S6, with 1 equiv each of HgCl(2) and CdCl(2) in acetone afforded Hg(II)(18S6)Cl(2) and Cd(II)(18S6)Cl(2), respectively. The crystal structure of Hg(II)(18-UT-6)Cl(2) revealed that the mercury atom was inside the cavity of the macrocycle and the geometry around the mercury atom was an eight-coordinate hexagonal bipyramidal arrangement. ORTEP drawing of Hg(II)(18S6)Cl(2) revealed the existence of the mercury atom outside the cavity of the ring, as well as a polymeric chain structure. (1)H NMR study of Hg(II)(18-UT-6)Cl(2) in acetone-d(6) indicated that the interconversion between free 18-UT-6 and pure complex was slower than the NMR time scale. The titration experiment by (1)H NMR revealed that 18-UT-6 had inclusion selectivity for the number of mercury atoms. The electrochemical behavior of complexes Hg(II)(18-UT-6)Cl(2) and Hg(II)(18S6)Cl(2) was also examined.     

Synthesis and Complexing Properties of Novel Crown Ethers and Thiacrown Ethers Incorporating New Heterocyclic Moieties

The synthesis of some novel crown and thiacrown ethers via the reaction of 2,3-bis(4-hydroxyphenyl) or 2,3-bis(4-mercaptophenyl)quinoxalines and pyridopyridazine with diethylene and triethylene glycol ditosylate is described. The complexing ability of compounds 5b and 5h, as the representatives of both groups of compounds, with alkali and alkali earth metal cations were measured by the solvent extraction method. The results showed that crown ether 5b comparatively had more affinity towards the Mg²⁺ cation, while thiacrown ether 5h had greater affinity towards the Ca²⁺ cation.     

Synthesis and cation-binding properties of poly-and bis(thiacrown ether)s

Poly- and bis(thiacrown ether) derivatives in which some oxygen atoms of benzocrown ether moiety are replaced by sulfur atoms have been synthesized. Their cation-binding abilities were investigated by using the solvent extraction method. The poly- and bis(benzothiacrown ether)s showed great affinity for silver ion, being more excellent in the affinity than the corresponding monocyclic analogs. They, however, possess very poor cation-binding ability for alkali and alkaline-earth metal ions. The poly- and bis(thiacrown ether)s also bind mercuric ions effectively, whereas the corresponding monomeric analogs do not at all.     

Flotation-spectrophotometric determination of mercury in water samples using iodide and ferroin.

This paper describes a simple and highly selective method for separation, preconcentration and spectrophotometric determination of trace amounts of mercury. The method is based on the flotation of an ion-associate of HgI4(2-) and ferroin between aqueous and n-heptane interface at pH 5. The ion-associate was then separated and dissolved in acetonitrile to measure its absorbance. Quantitative flotation of the ion-associate was achieved when the volume of the water sample containing Hg(II) was varied over 50 - 800 ml. Beer's law was obeyed over the concentration range of 3.2 x 10(-8) - 9.5 x 10(-7) mol l(-1) with an apparent molar absorptivity of 1 x 10(6) l mol(-1) cm(-1) for a 500 ml aliquot of the water sample. The detection limit (n = 25) was 6.2 x 10(-9) mol l(-1), and the RSD (n = 5) for 3.19 x 10(-7) mol l(-1) of Hg(II) was 1.9%. A notable advantage of the method is that the determination of Hg(II) is free from the interference of the almost all cations and anions found in the environmental and waste water samples. The determination of Hg(II) in tap, synthetic waste, and seawater samples was carried out by the present method and a well-established method of extraction with dithizone. The results were satisfactorily comparable so that the applicability of the proposed method was confirmed in encountering with real samples.     

Mercury L3 and sulfur K-edge studies of Hg-bound thiacrowns and back-extracting agents used in mercury remediation

Effective methods for the removal of mercury from water are in demand due to the high levels of mercury released from industrial and natural processes. Polymer pendant thiacrown compounds used for the sequestration of Hg(II) from aqueous solutions passed through columns have shown great promise as effective tools for remediation. The mercury can potentially be removed from the columns by extraction with diethyldithiocarbamate (dtc) and diphenylthiocarbazone, aka dithizone (dtz). In this study, Hg L3 and sulfur K-edge X-ray absorption spectroscopy are used to contrast the structure of the mercury thiacrown complex Hg[17]aneS5 with the structure of mercury bound to two potential back-extracting agents, Hg(dtc)₂ and Hg(dtz)₂. In Hg(dtc)₂, it was found that Hg(II) was bound to four sulfur atoms, with two Hg-S bond lengths of 2.66 Å and two Hg-S at 2.49 Å. In Hg(dtz)₂, Hg(II) was bound to two sulfur atoms with Hg-S bond distances of 2.38 Å and two nitrogen atoms with Hg-N at 2.54 Å. This contrasts with Hg[17]aneS5 with three Hg-S bonds at 2.40 Å. Mercury L3 and S K-edge results show that electron density shifts from sulfur in dtc and dtz, to mercury in Hg(dtc)₂ and Hg(dtz)₂.The increase in the number of bonds, and the more stable geometry and electron distribution in the back-extraction complexes confirms that these compounds are more stable than the mercury thiacrown complex, and thus suitable for regeneration of the pendant-arm [17]aneS₅ for further remediation processes.     

Alkalimetric determination of mercury by use of its reaction with 1-mercaptopropan-2,3-diol

The reaction of mercury(II) with 1-mercaptopropan-2,3-diol to form its mercaptide and protons, and alkalimetric titration of the acid produced is proposed as a simple and rapid method for determination of mercury. Any acid already present is first neutralized to Phenol Red indicator after complexation of the mercury(II) with iodide to avoid precipitation of mercuric oxide. Mercury metal, its insoluble salts in both oxidation states, complexes and organomercury compounds have been determined after digestion with nitric acid and persulphate to produce mercury(II). The interference of copper(II) is avoided by its reduction and solvent extraction with 2-benzoxazolethiol. The method is unaffected by the presence of large amounts of halides, oxalate, tartrate, citrate, fluoride, EDTA, thiocyanate and thiourea, which all interefere severely in complexation titrations.     

Mercury-199 NMR studies of thiacrown and related macrocyclic complexes: the crystal structures of [Hg(18S6)](PF6)2 and [Hg(9N3)2](ClO4)2

We wish to report the first measurements of (199)Hg NMR chemical shift data for a series of homoleptic Hg(II) complexes with thiacrown ligands and related aza and mixed thia/aza macrocycles. In mercury(II) complexes containing trithiacrown through hexathiacrown ligands, we observed (199)Hg NMR chemical shifts in the range of -298 to -1400 ppm. Upfield chemical shifts in these NMR spectra are seen whenever (a) the number of thioether sulfur donors in the complex is decreased, (b) a thioether sulfur donor is replaced by a secondary nitrogen donor, and (c) the size of the macrocycle ring increases without a change in the nature or number of the donor atoms. Changes in noncoordinating anions, such as hexafluorophosphate and perchlorate, have little effect on the (199)Hg chemical shift. For several complexes, we observed (3)J((199)Hg-(1)H) coupling in the range of 50-100 Hz, the first example of proton-mercury coupling through a C-S thioether bond. Also, we obtained unusual upfield (13)C NMR chemical shifts for methylene resonances in several of the thiacrown complexes which correspond to distortions within the five- and six-membered chelate rings bound to the mercury ion. We report the X-ray crystal structure of the complex [Hg(18S6)](PF(6))(2) (18S6 = 1,4,7,10,13,16-hexathiacyclooctadecane). The molecule crystallizes in the rare trigonal space group Pm1 with hexakis(thioether) coordination around the Hg(II) center confirming previous X-ray photoemission spectroscopic data on the compound. The lack of an observable (199)Hg NMR signal for the complex is the result of the identical length (2.689(2) Angstroms) of all six Hg-S bonds. We additionally report the X-ray structure of the complex [Hg(9N3)(2)](ClO(4))(2) (9N3 = 1,4,7-triazacyclononane) which shows hexakis(amine) coordination of the 9N3 to form a distorted trigonal prismatic structure. Solution dissociation of the one of the 9N3 ligands from the mercury ion is confirmed by multinuclear NMR experiments. For six-coordinate macrocyclic Hg(II) complexes, N6 donor sets have a preference for trigonal prisms while S6 donor sets favor octahedral structures.     

Color Reaction Between 4-(2-Pyridylazo)Resorcinol and Mercury (II) in the Presence of Surfactant,and Improved Spectrophotometric Determinations of Mercury(II) and Cyanide Ion with its Coloring

Abstract

The reactions among 4-(2-pyridylazo)resorcinol (PAR), mercury(II) and/or cyanide ion in the presence of water soluble surfactants alone or combination were systematically investigated at about pH 9. The spectrophotometric determinations of mercury(II) and cyanide ion were investigated by using the PAR-mercury(II)-HPC complex (3:2:2 molar ratio) in the presence of N-hexadecylpyridinium chloride (HPC) alone; calibration graphs were rectilinear in the ranges of 0 – 40 μg mercury(II) and 0 –10 μg cyanide ion in a final 10 ml with the apparent molar absorptivities of 5.9 × 10⁴ for mercury(II) and 2.5 × 10⁴ 1 mol^?1 cm^?1 for cyanide ion at 590 nm. The proposed method had advantages—rapidity, simplicity without solvent extraction, and sensitivity in comparison with reported solvent extraction methods. The interference of foreign ions decreased 1/2–l//4-fold compared with that in the presence of non-ionic surfactant alone.     

Electron transfer vs coordination chemistry: isomer-specific binding of HgII by an ortho-Wurster's thiacrown ether

Isomeric p- and o-phenylenediamine-containing macrocyclic hosts (Wurster's thiacrown ethers L1 and L2, respectively) were prepared and studied as Hg(II) ionophores. The distinct electrochemical properties of the two hosts allowed for the formation of a coordination compound with the ortho-Wurster's thiacrown ether but not the para isomer. In the latter case, the Hg(II) ion served as an oxidant in an electron-transfer reaction with the host. Solutions of the Hg(II) complex of L2 were studied by 13C NMR spectroscopy and cyclic voltammetry and revealed a strong interaction between the redox-active phenylenediamine subunit and the bound metal cation. An X-ray analysis confirmed the participation of the three macrocyclic S atoms and both phenylenediamine N atoms in the stabilization of the complex.     

A new solvent extraction scheme for the separation of platinum,palladium, rhodium and iridium

A new scheme is proposed for the separation of platinum, palladium, rhodium and iridium in hydrochloric acid solutions, by solvent extraction. Platinum and palladium are complexed with 2-mercaptobenzothiazole and potassium iodide and simultaneously extracted into chloroform, thus separating them from rhodium and iridium. Palladium is separated from platinum by extracting its dimethylglyoxime complex into chloroform, while rhodium is separated from iridium by extracting its 2-mercaptobenzothiazole complex into chloroform after reduction with tin(II) chloride.     

The simultaneous spectrophotometric determination of iron and of copper using I,IO-phenanthroline

The use of n-octanol as extracting solvent has been employed in a new procedure whereby 1, 10-phenanthroline provides a simultaneous separation and spectrophotometric determination of both iron and copper when present together. The method depends upon the extraction of the Cu(I) complex into the water-immiscible alcohol phase leaving the Fe(II) complex in the aqueous phase. The separation of the two phase system in one extraction to give a quantitative partition of copper and iron is a feature of the method. The Cu(I) complex with 1, 10-phenanthroline was previously thought to be inoperative using any known water-immiscible organic solvent. The corresponding use of 2,2'-dipyridine as a substitute for 1, 10-phenan-throline was investigated and found to be inadequate. The new procedure is the first disclosure that the ferroin functional group may serve as a Cu(I) specific in substitution for the cuproine functional group of such ligands as cuproine⁵, neo-cuproine8 and bathocuproine7. The new procedure has been demonstrated to give a high degree of precision and at the same time providing simplicity in manipulation.     

Interference of elements upon extraction by macrocyclic extractants

The extraction of cations of a series of alkali and alkali-earth metals, along with Pb(II), Rh(III), and Pd(II) with crown, thiacrown and azacrown ethers from picric and nitric acid solutions was studied. Upon the extraction of metal cations with macrocyclic extractants, the interference of those cations on the extraction of one another was observed in polar solvents. The causes of this phenomenon are revealed, and a mechanism for the suppression of extraction of the microcomponent with the macrocomponent is proposed. Upon the simultaneous extraction of americium (III) and europium (III) with calixarenes the co-extraction was noted for the first time, resulting in the good extraction of Am(III) from nitric acid solutions. We hypothesize on the formation of a mixed nitrate complex of americium and europium that can be effectively extracted into an organic phase with calixarenes.     

Competing ligand exchange-solid phase extraction method for the determination of the complexation of dissolved inorganic mercury (II) in natural waters

A method employing dual competitive ligand exchange followed by solid phase extraction (CLE-SPE) for characterizing the complexation of inorganic Hg(II) in natural waters is described. This method employs parallel use of two competing ligands: diethyldithiolcarbamate (DEDC), which forms hydrophobic complexes with Hg(II), and thiosalicylic acid (TSA), which forms hydrophilic complexes with Hg(II). Inorganic mercury complexed by natural and competing ligands are separated based on hydrophobicity using C₁₈ solid phase extraction columns.Data modeling allows for the calculation of the concentration and conditional stability constants of natural ligands capable of complexing Hg(II) in both the operationally defined hydrophilic and hydrophobic fractions. The use of multiple ligand concentrations, and thus multiple analytical windows, to characterize different ligand classes within both of these two fractions is described. Studies of the kinetics of the ligand exchange involved, potential for changes in the stability of natural ligands during freezing and thawing, potential breakthrough during solid phase extraction, as well as the method's precision and estimation of error, are presented and discussed.Results from the application of the method to natural freshwaters demonstrated that in the limited samples collected over 99.99% of the ambient inorganic mercury is strongly complexed by ligands with conditional stability constants (, Hg²⁺) on the order of 10³⁰, values similar to that of reduced sulfur ligands. At ambient conditions 85-90% of the mercury exists in hydrophobic complexes in these freshwaters, but strong Hg-binding ligands exist in both the hydrophobic and hydrophilic fractions.     

Determination of Iron (II) in Water by a Spectrophotometric Method After Preconcentration on an Organic Solvent-Soluble Membrane Filter

Abstract

A solvent-soluble membrane filter is proposed for a simple and rapid preconcentration and spectrophotometric determination of iron (II), which was collected on a nitrocellulose membrane filter as an ion-associate of the cationic complex of iron (II)-1,10-phenanthroline with an anionic surfactant of dodecyl sulfate. The ion-associate collected was dissolved in 5 ml of 2-methoxyethanol together with the filter. The color intensity due to the ion-associate in the resulting solution was measured at 510 nm against a reagent blank. Beer's law is obeyed in the range 1–15 μg Fe (II) in 5 ml of solvent with excellent reproducibility, and detection limits better than 0.5 μg dm^?3 as Fe (II) can be achieved. The diverse components normally present in water do not interfere when proper masking reagent is added. The proposed method has been applied to the analysis of water samples from several sources such as river water, ground water and tapwater samples, the recoveries of the iron (II) added to the samples are quantitative, and results found are satisfactory.     

Electrochemical properties of dinuclear [Ru([n]aneS4)] complexes of 2,3-bis(2-pyridyl)pyrazine

The syntheses of three new dinuclear [Ru([n]aneS(4))] complexes, where n = 12, 14, 16, bridged by the ligand 2,3-bis(2-pyridyl)pyrazine, (dpp) are reported. The absorption spectra of the complexes show changes in the energy of the MLCT bands within the series, indicating that the thiacrown ligands stabilise the Ru(II) oxidation state to different degrees. Electrochemical studies are also consistent with these observations, and reveal that the pi-acceptor properties of [n]aneS(4) ligands lead to metal based oxidation couples occurring at potentials that are more anodic than those observed in the analogous dinuclear [Ru(bpy)(2)](2+) complex. Despite the back-bonding properties of the thiacrown ligands leading to a reduction in ligand-bridge mediated metal-metal coupling, electrochemical interactions between the metals are still considerable.     

Extraction—spectrophotometric determination of copper(II) with 4-(2-pyridylazo)resorcinol and a long-chain quaternary ammonium salt

A simple and highly sensitive extraction—spectrophotometric determination of copper (II) is described. The ion-associate formed between the copper(II)—4-(2-pyridylazo)-resorcinol (PAR) anion and tetradecyldimethylbenzylammonium chloride (TDBA) is extracted with chloroform at pH 9.7. The absorption maximum of the extracted species occurs at 510 nm, the molar absorptivity being 8.05 (± 0.07) × 10⁴ l mol^-1 cm^-1. Beer's Law is obeyed in the concentration range 0.1–0.5 μg Cu ml^-1. The composition of the ion-associate is estimated to be [Cu(PAR)₂(TDBA)₂]. The conditional extraction constant is log K'_ex ≈ 8. The interference of some cations and anions is studied. The method is suitable for analysis of waters.     

Substoichiometric extraction of mercury with malonic anilide

Determination of mercury (II) by substoichiometric extraction with malonic anilide into a mixture of ether and MIBK is reported. The method has been applied in the estimation of the metal in industrial effluents.     

Extraction studies of metal complexes with some macrocyclic tetraaza ligands and xanthene dyes : Spectrophotometric determination of Cadmium(II) with Tetramethyltetraazacyclotetradecane and Erythrosin A

The liquid-liquid extraction of ion-pair complexes of zinc(II), copper(II) and cadmium(II) is described. The macrocyclic ligands 1,4,8,11-tetramethyl-1,4,8,11-tetraazacyclotetradecane (4Me-cyclam-14) and rac-5,7,7,12,14,14-hexamethyl-1,4,8,11-tetraazacyclotetradecane (Tet b) are used with xanthene dyes as the counter ions. The apparent extraction constants (D′_c) are reported. The sequences of extraction efficiency of both ligands are related to the structure of the complexes. The apparent molar absorptivity of the Cd(4Me-cyclam-14)—erythrosin A ion-associate is 1.1 × 10⁵ l mol^? cm^?1. The calibration graph is linear over the range 0—10^?5 M, which allows even 0.05 μg ml^?1 cadmium to be determined in a 0.5 M sodium hydroxide medium. No interference was observed from Ni²⁺, Pb²⁺, Zn²⁺, Mg²⁺, Sn⁴⁺, Ga³⁺, Al³⁺ and Fe³⁺. Interferences were Cu²⁺, Hg²⁺, Ag⁺ and large anions.     

EXAFS investigations of the mechanism of facilitated ion transfer into a room-temperature ionic liquid

The Sr(II)-crown ether complexes formed in a room-temperature ionic liquid (RTIL), 1-methyl-3-pentylimidazolium bis[(trifluoromethyl)sulfonyl]amide, have been studied by X-ray absorption fine structure measurements at the Sr K-edge. When a Sr(NO(3))(2)-crown ether complex is directly dissolved in a water-saturated RTIL, both nitrate ligands and the crown ether coordinate the Sr, as observed in a conventional two-phase water-octanol system. When the cationic Sr-crown ether complex is created in a two-phase water-RTIL system, however, only cationic Sr-crown ether complexes are observed in the RTIL phase. This difference in the coordination complexes arises from differences in the mechanism of cation extraction between the RTIL and conventional molecular organic solvents, a finding with important implications for synthesis, catalysis, and ion separations using two-phase water-RTIL systems.     

Selective stripping voltammetric determinations employing cells for electrolysis with simultaneous ion-exchange or solvent extraction

Cells have been designed for stripping-voltammetry analyses employing graphite working electrodes and mercury film electrodes on a graphite support, permitting ion-exchange or solvent extraction separation simultaneously with the pre-electrolysis. The ion-exchange separation was tested on the determination of mercury in the presence of excess of copper(II), lead and cadmium and on the determination of bismuth in the presence of excess of copper(II). The solvent extraction separation was tested on the determination of mercury(II) in the presence of copper(II), lead and cadmium and the determination of copper(II) in the presence of bismuth. Very good results were obtained by using ion-exchange, where the sensitivity and precision of the determination are comparable with those obtained in the determinations without separation, the separation efficiency being very high, limited virtually only by the capacity of the ion-exchanger used. The solvent extraction separations yielded poorer results: the sensitivity of the determination is decreased substantially, the separation efficiency is not very high and difficulties arise from the adsorption of the organic phase on the electrode surface.