Extractive spectrophotometric methods for the assay of sildenafil citrate (Viagra) in pure form and in pharmaceutical formulations

Two simple and sensitive extractive spectrophotometric methods for the determination of sildenafil citrate (SC) are proposed. The methods are based on the formation of ion-association complexes of sildenafil citrate with bromocresol green (BCG, method A) and with chromoxane cyanine R (CCR, method B) in aqueous acidic buffer. The complex species, extractable to chloroform phase, were quantitatively measured at 415 and 460 nm for methods A and B, respectively. Beer's law was obeyed in the SC concentration range 1.25-25 mug ml(-1) with a limit of detection 0.16 mug ml(-1) and 1.5-60 mug ml(-1) with a limit of detection 0.18 mug ml(-1), respectively, for methods A and B. The methods have been successfully applied to the analysis of bulk drug and its tablets. No interference was observed from common pharmaceutical adjuvants.     

Extractive spectrophotometric determination of some fluoroquinolone derivatives in pure and dosage forms

Two simple and sensitive extractive spectrophotometric methods for the determination of some fluoroquinolone derivatives (norfloxacin, NRF; ciprofloxacin, CPF; ofloxacin, OFL; and enrofloxacin, ERF) with Supracene Violet 3B (SV 3B, method A) and tropaeolin 000 (TP 000, method B) are described. The methods are based on the formation of ion-association complexes of fluoroquinolones with these dyes, which are extracted into chloroform and have absorption maxima at 575 nm (SV 3B) and 485 nm (TP 000). The methods obey Beer's law and the precision and accuracy of the methods were checked by UV reference methods. The detection limits were 5.0 mug/ml for NRF and 2.5 mug/ml for CPF in method A and 2.5 mug/ml for OFL and ERF in methods A and B.     

Extractive colorimetric method for the determination of dothiepin hydrochloride and risperidone in pure and in dosage forms

Three rapid, simple, reproducible and sensitive extractive colorimetric methods (A--C) for assaying dothiepin hydrochloride (I) and risperidone (II) in bulk sample and in dosage forms were investigated. Methods A and B are based on the formation of an ion pair complexes with methyl orange (A) and orange G (B), whereas method C depends on ternary complex formation between cobalt thiocyanate and the studied drug I or II. The optimum reaction conditions were investigated and it was observed the calibration curves resulting from the measurements of absorbance concentration relations of the extracted complexes were linear over the concentration range 0.1--12 microg ml(-1) for method A, 0.5--11 mug ml(-1) for method B, and 3.2--80 microg ml(-1) for method C with a relative standard deviation (RSD) of 1.17 and 1.28 for drug I and II, respectively. The molar absorptivity, Sandell sensitivity, Ringbom optimum concentration ranges, and detection and quantification limits for all complexes were calculated and evaluated at maximum wavelengths of 423, 498, and 625 nm, using methods A, B, and C, respectively. The interference from excipients commonly present in dosage forms and common degradation products was studied. The proposed methods are highly specific for the determination of drugs I and II, in their dosage forms applying the standard additions technique without any interference from common excipients. The proposed methods have been compared statistically to the reference methods and found to be simple, accurate (t-test) and reproducible (F-value).     

Rapid, selective, direct and derivative spectrophotometric determination of titanium with 2,4-dihydroxybenzaldehyde isonicotinoyl hydrazone

A simple and sensitive spectrophotometric method is developed for the determination of titanium in aqueous medium. The metal ion forms a reddish brown coloured complex with 2,4-dihydroxybenzaldehyde isonicotinoyl hydrazone (2,4-DHBINH) in the pH range 1-7. The complex shows two absorption maxima, one at 430 nm and the other at 500 nm. The reagent shows appreciable absorbance of 430 nm and negligible absorbance at 500 nm at pH 1.5. Beer's law is obeyed in the range 0.09 to 2.15 mug ml(-1) of titanium(IV). The molar absorptivity and the Sandell's sensitivity of the method are 1.35 x 10(4) 1 mol(-1) cm(-1) and 0.0049 mug cm(-2), respectively. A method for the determination of titanium by first-order derivative spectrophotometry is also proposed. The methods have been employed successfully for the determination of titanium in several alloy and steel samples.     

Flow injection spectrophotometric determination of boron in ceramic materials

A flow injection spectrophotometric method for the determination of boron in ceramic materials is described. The method is based on spectrophotometric measurement of the decrease in the pH produced by the reaction between boric acid and mannitol in the presence of an acid-base indicator. A bichannel FI (flow injection) manifold in which the sample solutions were injected into deionized water (at pH 5.4) and the stream was later merged with the reagent stream (a mannitol solution containing 1x10(-4) mol l(-1) bromocresol green at pH 5.4), was used. Transient signals were monitored at 616 nm. A theoretical model which describes the dependence between the absorbance values and boric acid concentration is presented. The model predicts a non linear dependence between the absorbance or increment in absorbance and the boric acid concentration. In contrast, the model predicts a linear dependence between the inverse of the absorbance values and the boric acid concentration. The calibration graphs (1/A vs mug ml(-1) B(2)O(3)) were linear over the range 1-30 mug ml(-1) of B(2)O(3). The relative standard deviations were 0.7 and 0.4% for 4 and 8 mug ml(-1) of B(2)O(3), respectively. The limit of detection was 0.02 mug ml(-1) of B(2)O(3) (3sigma criterium). The method was used to determine boron in nine ceramic materials with very different nominal boron compositions. The results were compared with those obtained using a potentiometric titration method as reference method. No significant differences (at 95% probability level) were found between the proposed and reference methods. The method is rapid, reliable, precise and free of interferences.     

Spectrophotometric study of the determination of copper with ammonium 1-pyrrolidinecarbodithioate

A new spectrophotometric method for the determination of traces of copper has been developed. The method is based on the formation of a stable 1:2 complex of copper(II) and 1-pyrrolidinecarbodithioate and the isolation of this complex by extraction into chloroform. The absorbance is measured at either 269 nm or 435 nm. The detection limit is 0.03 mug, of copper per ml for absorbance measurements at 435 nm.     

The separation of W(V) from HCl-KSCN medium on polyurethane foam sorbents for its spectrophotometric determination in steels and silicates

A simple procedure for selective sorption of tungsten is described. The method involves reduction of W(VI) to W(V) with tin(II) chloride (2%, w/v) at 8-9M hydrochloric acid, formation of the W(V)-SCN complex with 0.2M KSCN and its sorption on polyurethane foam within 20 min. The sorbed complex is then eluted with acidified acetone (1 ml of 1M hydrochloric acid and 8 ml of acetone) followed by addition of 1 ml of 0.1M KSCN to the eluent. The method has been applied to the spectrophotometric determination of tungsten in steels and silicates by measuring the absorbance of the eluted solution at 400 nm. Beer's law is obeyed for the range 0.1-12 mug W/ml. Other elements, e.g., Co(III) (50 mug/ml), Cu(II) (10 mug/ml), Ti(IV) (20 mug/ml), V(V) (10 mug/ml) and Mo(VI) (0.5 mug/ml) have no effect on the method. Interference of copper, up to 100 mug/ml has been eliminated by masking with thiourea and that due to molybdenum by prior separation with thioglycollic acid on PUF. The method has been verified with standard samples.     

Spectrophotometric multicomponent determination of sunset yellow, tartrazine and allura red in soft drink powder by double divisor-ratio spectra derivative, inverse least-squares and principal component regression methods

Double divisor-ratio spectra derivative (graphical method), classical least-squares and principal component regression (two numerical methods) methods were developed for the spectrophotometric multicomponent analysis of soft drink powders and synthetic mixtures containing three colorants without any chemical separation. The graphical method is based on the use of derivative signals of the ratio spectra using double divisor. In this method, the linear determination ranges were 2-8 mug ml(-1) sunset yellow, 4-18 mug ml(-1) tartrazine and 2-8 mug ml(-1) allura red in 0.1 M HCl. In the numerical methods, a training set was randomly prepared by using 18 samples containing between 0 and 8 mug ml(-1) of sunset yellow, 0-18 mug ml(-1) of tartrazine and 0-8 mug ml(-1) of allura red. The chemometric calibrations were calculated by using the prepared training set and its absorbances at seven points (from 375.0 to 550.0 nm) in the spectral region 325-584 nm. The proposed methods were validated by using synthetic ternary mixtures and applied to the simultaneous determination of three colorants in soft drink powders. The obtained results were statistically compared with each other.     

Spectrophotometric Determination of Ipratropium Bromide in Liquid for Nebulization

ABSTRACT

Three simple and sensitive spectrophotometric methods for the determination of ipratropium bromide (IPB) in liquid for nebulization are described. Method A, is based on the formation of a charge transfer complex with iodine. The reaction product is measured spectrophotometrically at 278 nm. Method B, is based oh the formation of an ion – association complex between the drug and an acidic dye, Bromocresol green (BCG), which is extractable into chloroform and has an absorption maximum at 418 nm. Method C, uses derivative spectrophotometry for the determination of IPB by measuring the D₂-value at 232 nm. Beer's law is obeyed over the concentration range 1-10, 2-16 and 5-30 μg ml^? for method A, B and C, respectively. The optimum conditions for the formation of the charge transfer or ion-association complexes were optimized. The proposed methods were applied for the determination of IPB in liquid for nebulization. Evaporation to dryness and extraction of the residue with isopropanol, were performed before application of methods A & B. Mean percentage recoveries were found to be 99.67 ± 0.79, 99.26 ± 1.06 and 100.21 ± 0.85 for method A, B, and C, respectively.     

Extraction and spectrophotometric determination of titanium(IV) with alizarin and fluoride

The characteristics of the mixed-ligand titanium(IV)-fluoride-alizarin complex, including the optimum conditions of formation and extraction into methyl isobutyl ketone, are described. A simple and sensitive procedure for spectrophotometric determination of titanium has been developed. At pH 9.5-10.3 titanium reacts with alizarin in the presence of fluoride to form a red-violet complex that is completely extractable into methyl isobutyl ketone, and has its absorption maximum at 513 nm. The molar absorptivity at 513 nm is 7.0 x 10(4)l.mole(-1).cm(-1). Beer's law is obeyed up to 22 mug of titanium in 30 ml of solution. The method has been used for the determination of titanium in an oxide mixture and aluminium alloy samples.     

An indirect method for the spectrofluorimetric determination of trace amounts of germanium after extraction as an ion association complex with rhodamine B in the presence of chromotropic acid

A highly sensitive and selective spectrofluorimetric method for the determination of 0.05-2.00 mug germanium is described. Germanium is treated with chromotropic acid at pH 2.5 and the resultant anionic complex is extracted as an ion pair with rhodamine into toluene. Addition of butanol to the organic extract releases the fluorescent dye and facilitates its measurement at 570 nm after exciting at 540 nm. The method provides a detection limit of 0.003 mug ml(-1) and is virtually free from interference from extraneous ions. The relative standard deviaiton is 2.9% for ten determinations of 1.0 mug germanium. The method has been applied to the determination of germanium in various ores, minerals and rock samples.     

Simultaneous determination of manganese and zinc in mixtures using first- and second-derivative spectrophotometry

A new direct spectrophotometric determination of manganese with 5,8-dihydroxy-1,4-naphthoquinone (naphthazarin,NAZA) is reported. Absorption maximum, molar absorptivity and Sandell's sensitivity of 1:2 (M:L) complex are 695 nm, 1.88x10(4) l mol(-1) cm(-1) and 2.92 ng cm(-2), respectively. A linear calibration graph is obtained up to a concentration of 7.2 mug ml(-1) of manganese. The optimum range for determination (Ringbom) is between 0.20 and 6.8 mug ml(-1). A rapid method for simultaneous determination of manganese and zinc in their mixture using derivative spectra is described. The range 0.28-5.6 mug ml(-1) manganese could be determined in the presence of 0.33-6.8 mug ml(-1) zinc and vice versa. The developed method was applied to the simultaneous spectrophotometric determination of manganese and zinc in some synthetic mixtures and was found to give satisfactory results.     

Permanganate-based chemiluminescence analysis of cefadroxil monohydrate in pharmaceutical samples and biological fluids using flow injection

A chemiluminescent method using flow injection is described for the determination of cefadroxil monohydrate. The method is based on the chemiluminescence reaction of cefadroxil with potassium permanganate in sulphuric acid, sensitized by quinine. The proposed procedure allows the determination of cefadroxil over the concentration range 0.1-30 mug ml(-1) with a detection limit of 0.05 mug ml(-1) and a sample measurement frequency of 150 samples h(-1). The method was successfully applied to the determination of cefadroxil in pharmaceutical preparations and biological fluids.     

An insight into the solution equilibria of magnesium(II) with purpurin and spectrophotometric determination of magnesium

The complexation equilibria of magnesium(II) with purpurin (PURP) are studied spectrophotometrically as a function of pH in 50% (v/v) ethanol-water medium at 20 degrees C. The uncharged complex formed at pH 9.5 allows precise and accurate determination of magnesium over the concentration range 0.8-4.3 mug ml(-1). The molar absorptivity of the Mg-PURP complex at 540 nm and detection limit for Mg are 9.2x10(3) l mol(-1) cm(-1) and 75 ng ml(-1), respectively. The proposed method is rapid and possesses reasonable selectivity. Under the optimum conditions, the use of first-derivative spectrophotometry has the advantage of high sensitivity than normal spectrophotometry and allows the determination of 0.2 mug ml(-1) of magnesium. The validity of the method is examined by analysing several SRM Portland cement samples and a variety of cement materials of variable magnesia content.     

A rapid extractive spectrophotometric method for the determination of tin in canned foods with 5,7-dichloro-8-quinolinol

A rapid method for the spectrophotometric determination of tin in canned foods, based on formation of the binary Sn(IV)-5,7-dichloro-8-quinolinol complex and extraction into chloroform has been developed. The absorption maximum at 390nm ( = 1.26 x 10(4) l.mole(-1).cm(-1)) is used for the determination. Beer's law is obeyed up to 6mug of tin per ml. Organic matter is destroyed by digestion with acid. Potential interferences have been studied. The detection limit for tin is 2.5mg kg .     

Malachite green as a reagent for detection and spectrophotometric determination of chromium(VI)

A sensitive and inexpensive method of spectrophotometric determination of chromium(VI), based on the absorbance of its complex with malachite green and acetic acid at pH 2.5 is reported. The complex shows a molar absorptivity of 8 x 10(4) l.mole(-1) cm(-1) at 560 nm, using malachite green and acetic acid as reference solution. The effect of time, temperature, pH and reagent concentration is studied and optimum operating conditions are established. Beer's law is applicable in the concentration range 2.0-22.8 mug/ml chromium(VI). The resin beads act as a catalyst and as little as 1.6 mug of chromium(VI) is detected in the resin phase as compared to 4.1 mug in the solution phase. The standard deviation in the determinations is +/-0.40 mug/ml for a 10.35 mug/ml solution.     

FI-on line photochemical reaction for direct chemiluminescence determination of photodegradated chloramphenicol

A new, simple, clean and selective flow injection strategy based on the tandem photochemical reaction-chemiluminescence detection was applied to the determination of chloramphenicol. The determination is based on the on-line photodegradation of the drug in a glycine buffer at pH 8.8 by using a photoreactor consisting of 697 cmx0.5 mm PTFE tubing helically coiled around an 8 W low-pressure mercury lamp. Photodegradated chloramphenicol is detected by direct chemiluminescence of resulting photo-fragments and their subsequent reaction with potassium permanganate in sulfuric acid medium as oxidant. The method allows the chemiluminescence determination of compounds which do not exhibit native chemiluminescence. The calibration graph was linear up to 14 mug ml(-1) chloramphenicol, the limit of detection was 30 ng ml(-1), the relative standard deviation was 2.4% for 7 mug ml(-1) of the drug and the sample throughput was 60 h(-1). Taking into account the importance of the medium of photodegradation on the mechanism of photodegradation a comparative study in terms of selective was performed for different chemical media employed in the procedure of photodegradation. The proposed method was applied to the determination of chloramphenicol in commercially available pharmaceutical formulations.     

The use of phenylfluorone in the presence of cetylpyridinium chloride and Triton X-100 for the spectrophotometric determination of copper(II) in blood serum

A simple and sensitive spectrophotometric method for determination of copper(II) is based on the formation of a blue coloured complex of Cu(II) with 9-phenyl-2,3,7-trihydroxy-6-fluorone (PF) in the presence of cetylpyridinium chloride (CP) and Triton X-100, has been developed. Optimum concentrations of PF, CP, Triton X-100 and pH ensuring maximum absorbance were defined. The complex Cu(II)-PF-CP-Triton X-100 shows maximum absorbance at 595 nm with a molar absorptivity value of 9.67x10(4) l mol(-1) cm(-1). The detection limit of the method is 0.028 mug ml(-1). Beer's law is obeyed for copper concentrations in the range 0.04-0.4 mug ml(-1). The studies of the effect of foreign ions on determination of copper, show that the selectivity of the method is poor. The cations of alkali metals and anions Br(-), Cl(-), I(-), F(-), NO(2)(-), NO(3)(-), CH(3)COO(-), SO(4)(2-), S(2)O(3)(2-), PO(4)(3-), citrates (examined in 1000-fold molar excess over copper) do not affect the determination. All cations forming complexes with PF have an interfering effect. The statistical evaluation of the method was carried out for six determinations using 10 mug of Cu and the following results were obtained: the standard deviation, SD=0.042, the confidence interval mu(95)=10.1+/-0.1 mug Cu. The method has been applied for determination of copper in blood serum.     

Manual and fia methods for the determination of cadmium with malachite green and iodide

A sensitive and rapid spectrophotometric method for the determination of cadmium is described, based on the formation of a blue complex at pH 4 between the anionic iodide complex of cadmium(II) and Malachite Green; the colour is stabilized with poly(vinyl alcohol). The calibration graph for measurement at 685 nm is linear over the range 1-50 mug of cadmium per 25 ml of final solution, with a relative standard deviation of +/-1.7% for 1 mug/ml cadmium. The molar absorptivity is 6.1 x 10(4) 1.mole(-1).cm(-1). The method can be successfully adapted for FIA, the peak height being proportional to the cadmium concentration over the range 0.1-3 mug/ml; a two-channel manifold is used and an improvement in selectivity is obtained. The use of a gradient tube is demonstrated to give a good calibration for Cd(II) over the range 2 x 10(-2) -2 x 10(-6)M.     

Solvent extraction-spectrophotometric determination of trace amounts of ammonium, barium and potassium in a mixture by dicyclohexyl-18-crown-6 and orange II

A simple and sensitive extraction-spectrophotometric method for the determination of ammonium, barium and potassium in a mixture solution is reported. The DC18C6-ammonium-Orange II (DC18C6-NH(4)-OR II), DC18C6-Barium-Orange II (DC18C6-Ba-(OR II)(2)) and DC18C6-Potassium-Orange II (DC18C6-K-OR II) ternary complexes are quantitatively extracted into dichloromethane and their absorbances are measured at 483 nm. Linear calibration graphs were obtained over the concentration ranges of 0.05-3.00, 0.05-2.00 and 0.05-6.00 mug ml(-1) for ammonium, barium and potassium, respectively. The relative standard deviations for 1.0 mug ml(-1) of ammonium, barium and potassium are, respectively, 1.1, 1.6 and 2.50%. The limit of detection, LOD, for these three ions is reported to be 0.02, 0.01 and 0.02 mug ml(-1), respectively. The interfering effect of a large number of diverse ions on the determination of these three ions was studied. The method was applied to the Karon river raw water contaminated with industrial and house sewages. The results showed high potential of the recommended method for the determination of NH(4)(+), Ba(2+) and K(+) in water samples.