A posteriori error analysis of the discontinuous finite element methods for first order hyperbolic problems

In this paper, we consider the a posteriori error analysis of discontinuous Galerkin finite element methods for the steady and nonsteady first order hyperbolic problems with inflow boundary conditions. We establish several residual-based a posteriori error estimators which provide global upper bounds and a local lower bound on the error. Further, for nonsteady problem, we construct a fully discrete discontinuous finite element scheme and derive the a posteriori error estimators which yield global upper bound on the error in time and space. Our a posteriori error analysis is based on the mesh-dependent a priori estimates for the first order hyperbolic problems. These a posteriori error analysis results can be applied to develop the adaptive discontinuous finite element methods.     

Enhanced accuracy by post-processing for finite element methods for hyperbolic equations

We consider the enhancement of accuracy, by means of a simple post-processing technique, for finite element approximations to transient hyperbolic equations. The post-processing is a convolution with a kernel whose support has measure of order one in the case of arbitrary unstructured meshes; if the mesh is locally translation invariant, the support of the kernel is a cube whose edges are of size of the order of only. For example, when polynomials of degree are used in the discontinuous Galerkin (DG) method, and the exact solution is globally smooth, the DG method is of order in the -norm, whereas the post-processed approximation is of order ; if the exact solution is in only, in which case no order of convergence is available for the DG method, the post-processed approximation converges with order in , where is a subdomain over which the exact solution is smooth. Numerical results displaying the sharpness of the estimates are presented.

     

Monotonicity and finite element methods for hyperbolic initial value problems

A well known theórem about super- and subfunctions for the solution of hyperbolic initial value problems constructs differentiable functions as upper and lower bounds (see Walter [1], 21 XIII). The proof can be done by transforming the differential equation problem into a set of integral equations, using the monotonicity-properties of the arising integral operators. This proof needs an integral representation for twice differentiable functions. It is shown that this proceeding can be generalized to get upper and lower bounds in terms of finite element functions. To do this, we give an integral representation for continuous, piecewise differentiable functions, including the discontinuities of their derivatives. Then the generalization of the classical proof yields interface conditions for the finite element functions. Finally, it is demonstrated how to realize numerically these conditions.     

Hermite methods for hyperbolic initial-boundary value problems

We study arbitrary-order Hermite difference methods for the numerical solution of initial-boundary value problems for symmetric hyperbolic systems. These differ from standard difference methods in that derivative data (or equivalently local polynomial expansions) are carried at each grid point. Time-stepping is achieved using staggered grids and Taylor series. We prove that methods using derivatives of order in each coordinate direction are stable under -independent CFL constraints and converge at order . The stability proof relies on the fact that the Hermite interpolation process generally decreases a seminorm of the solution. We present numerical experiments demonstrating the resolution of the methods for large as well as illustrating the basic theoretical results.

     

A quadrature finite element method for semilinear second‐order hyperbolic problems

In this work we propose and analyze a fully discrete modified Crank–Nicolson finite element (CNFE) method with quadrature for solving semilinear second‐order hyperbolic initial‐boundary value problems. We prove optimal‐order convergence in both time and space for the quadrature‐modified CNFE scheme that does not require nonlinear algebraic solvers. Finally, we demonstrate numerically the order of convergence of our scheme for some test problems. © 2007 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 2008     

On finite element methods for plasticity problems

Summary We prove an error estimate for an incremental finite element method for obtaining approximations to the stresses in an elastic-perfectly plastic body. We also comment on the limit load problem.     

ADI quadratic finite volume element methods for second order hyperbolic problems

We use the biquadratic elements to develop an alternating direction implicit (ADI) finite volume element method for second order hyperbolic problems in two spatial dimensions. The optimal H ¹-norm error estimate of second order accuracy is proved. Numerical experiments that corroborate the theoretical analysis are also presented.     

A second order characteristics finite element scheme for natural convection problems

In this paper a second order characteristics finite element scheme is applied to the numerical solution of natural convection problems. Firstly, after recalling the mathematical model, a second order time discretization of the material time derivative is introduced. Next, fully discretized schemes are proposed by using finite element methods. Numerical results for the two-dimensional problem of buoyancy-driven flow in a square cavity with differentially heated side walls are given and compared with a reference solution.     

Superconvergence of mixed finite element methods for optimal control problems

In this paper, we investigate the superconvergence property of the numerical solution of a quadratic convex optimal control problem by using rectangular mixed finite element methods. The state and co-state variables are approximated by the lowest order Raviart-Thomas mixed finite element spaces and the control variable is approximated by piecewise constant functions. Some realistic regularity assumptions are presented and applied to error estimation by using an operator interpolation technique. We derive superconvergence properties for the flux functions along the Gauss lines and for the scalar functions at the Gauss points via mixed projections. Moreover, global superconvergence results are obtained by virtue of an interpolation postprocessing technique. Thus, based on these superconvergence estimates, some asymptotic exactness a posteriori error estimators are presented for the mixed finite element methods. Finally, some numerical examples are given to demonstrate the practical side of the theoretical results about superconvergence.

     

双曲型方程的非协调变网格有限元方法

采用变网格的思想讨论了双曲型方程在各向异性网格下的Crouzeix-Raviart型非协调有限元逼近.在不需要引入传统分析中Riesz投影的情况下,得到了相应最优误差估计.     

A note on the residual type a posteriori error estimates for finite element eigenpairs of nonsymmetric elliptic eigenvalue problems

In this paper we study the residual type a posteriori error estimates for general elliptic (not necessarily symmetric) eigenvalue problems. We present estimates for approximations of semisimple eigenvalues and associated eigenvectors. In particular, we obtain the following new results: 1) An error representation formula which we use to reduce the analysis of the eigenvalue problem to the analysis of the associated source problem; 2) A local lower bound for the error of an approximate finite element eigenfunction in a neighborhood of a given mesh element T.     

Analysis of two‐grid discretization scheme for semilinear hyperbolic equations by mixed finite element methods

In this paper, the full discrete scheme of mixed finite element approximation is introduced for semilinear hyperbolic equations. To solve the nonlinear problem efficiently, two two‐grid algorithms are developed and analyzed. In this approach, the nonlinear system is solved on a coarse mesh with width H, and the linear system is solved on a fine mesh with width h≪H. Error estimates and convergence results of two‐grid method are derived in detail. It is shown that if we choose in the first algorithm and in the second algorithm, the two‐grid algorithms can achieve the same accuracy of the mixed finite element solutions. Finally, the numerical examples also show that the two‐grid method is much more efficient than solving the nonlinear mixed finite element system directly.     

Finite element methods for elliptic optimal control problems with boundary observations

We study in this paper the finite element approximations to elliptic optimal control problems with boundary observations. The main feature of this kind of optimal control problems is that the observations or measurements are the outward normal derivatives of the state variable on the boundary, this reduces the regularity of solutions to the optimal control problems. We propose two kinds of finite element methods: the standard FEM and the mixed FEM, to efficiently approximate the underlying optimal control problems. For both cases we derive a priori error estimates for problems posed on polygonal domains. Some numerical experiments are carried out at the end of the paper to support our theoretical findings.     

Robust multilevel methods for quadratic finite element anisotropic elliptic problems

This paper discusses a class of multilevel preconditioners based on approximate block factorization for conforming finite element methods employing quadratic trial and test functions. The main focus is on diffusion problems governed by a scalar elliptic partial differential equation with a strongly anisotropic coefficient tensor. The proposed method provides a high robustness with respect to non‐grid‐aligned anisotropy, which is achieved by the interaction of the following components: (i) an additive Schur complement approximation to construct the coarse‐grid operator; (ii) a global block (Jacobi or Gauss–Seidel) smoother complementing the coarse‐grid correction based on (i); and (iii) utilization of an augmented coarse grid, which enhances the efficiency of the interplay between (i) and (ii). The performed analysis indicates the high robustness of the resulting two‐level method. Moreover, numerical tests with a nonlinear algebraic multilevel iteration method demonstrate that the presented two‐level method can be applied successfully in the recursive construction of uniform multilevel preconditioners of optimal or nearly optimal order of computational complexity. Copyright © 2013 John Wiley & Sons, Ltd.     

A new alternating‐direction finite element method for hyperbolic equation

A modified backward difference time discretization is presented for Galerkin approximations for nonlinear hyperbolic equation in two space variables. This procedure uses a local approximation of the coefficients based on patches of finite elements with these procedures, a multidimensional problem can be solved as a series of one‐dimensional problems. Optimal order H₀¹ and L² error estimates are derived. © 2007 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2007     

Analysis of a bilinear finite element for shallow shells. II: Consistency error

We consider a bilinear reduced-strain finite element of the MITC family for a shallow Reissner-Naghdi type shell. We estimate the consistency error of the element in both membrane- and bending-dominated states of deformation. We prove that in the membrane-dominated case, under severe assumptions on the domain, the finite element mesh and the regularity of the solution, an error bound can be obtained if the contribution of transverse shear is neglected. Here is the thickness of the shell, the mesh spacing, and a smoothness parameter. In the bending-dominated case, the uniformly optimal bound is achievable but requires that membrane and transverse shear strains are of order as . In this case we also show that under sufficient regularity assumptions the asymptotic consistency error has the bound .

     

Local a posteriori estimates for pointwise gradient errors in finite element methods for elliptic problems

We prove local a posteriori error estimates for pointwise gradient errors in finite element methods for a second-order linear elliptic model problem. First we split the local gradient error into a computable local residual term and a weaker global norm of the finite element error (the ``pollution term'). Using a mesh-dependent weight, the residual term is bounded in a sharply localized fashion. In specific situations the pollution term may also be bounded by computable residual estimators. On nonconvex polygonal and polyhedral domains in two and three space dimensions, we may choose estimators for the pollution term which do not employ specific knowledge of corner singularities and which are valid on domains with cracks. The finite element mesh is only required to be simplicial and shape-regular, so that highly graded and unstructured meshes are allowed.

     

一阶双曲型方程组的时空间断全离散有限元的收敛性

利用能量方法和单元正交分析方法，构造了特殊的Radau型单元正交展开和张量积分解，简明论证了一阶双曲方程组时空间断有限元的收敛性，得到了丰满阶的整体误差估计．数值实验证实了这些理论结果．