Syntheses and characterization of mu,eta(1),eta(1)-3,5-di-tert-butylpyrazolato derivatives of aluminum

The 3,5-di-tert-butylpyrazolato (3,5-tBu(2)pz) derivatives of aluminum [(eta(1),eta(1)-3,5-tBu(2)pz)(mu-Al)R(1)R(2)](2) (R(1) = R(2) = Me 1; R(1) = R(2) = Et, 2; R(1) = R(2) = Cl, 3; R(1) = R(2) = I, 4; [(eta(2)-3,5-tBu(2)pz)(3)Al], 5; [Al(2)(eta(1),eta(1)-3,5-tBu(2)pz)(2)(mu-E)(C triple bond CPh)(2)] (E = S (6), Se (7), Te (8)) have been prepared in good yield. Compounds 1 and 2 were obtained by the reactions of H[3,5-tBu(2)pz] with Me(3)Al and Et(3)Al, respectively. Reaction of [(eta(1),eta(1)-3,5-tBu(2)pz)(mu-Al)H(2)](2) with the pyrazole H[3,5-tBu(2)pz] gave [(eta(2)-3,5-tBu(2)pz)(3)Al] (5). The reaction of [(eta(1),eta(1)-3,5-tBu(2)pz)(mu-Al)R(2)](2) (R = H, Me) and I(2) yielded 4, while the reaction of 1 equiv of K[3,5-tBu(2)pz] and AlCl(3) afforded 3. In addition, the reaction of [Al(2)(eta(1),eta(1)-3,5-tBu(2)pz)(2)(mu-E)H(2)] and HC triple bond CPh gave 6, 7, and 8. All compounds have been characterized by elemental analysis, NMR, and mass spectroscopy. The molecular structure analyses of compounds 1, 3, 6, and 7 by X-ray crystallography showed that complexes 1 and 3 are dimeric with two eta(1),eta(1)-pyrazolato groups in twisted conformation while 6 and 7 with two eta(1),eta(1)-pyrazolato groups display a boat conformation.     

Copper complexes of nitrogen-anchored tripodal N-heterocyclic carbene ligands

Incorporation of a nitrogen functionality into a tripodal N-heterocyclic carbene ligand system affords the first N-anchored tetradentate tris-carbene ligands TIMEN(R) (R = Me (5a), t-Bu (5b), Bz (5c)). Treatment of the methyl derivatized [H(3)TIMEN(Me)](PF(6))(3) imidazolium salt (H(3)5a) with silver oxide yields the silver complex [(TIMEN(Me))(2)Ag(3)](PF(6))(3) (9), which, in a ligand transfer reaction, reacts with copper(I) bromide to give the trinuclear copper(I) complex [(TIMEN(Me))(2)Cu(3)](PF(6))(3) (10). Deprotonation of the tert-butyl and benzyl derivatives [H(3)TIMEN(t-Bu)](PF(6))(3) and [H(3)TIMEN(Bz)](PF(6))(3) yields the free tris-carbenes TIMEN(t-Bu) (5b) and TIMEN(Bz) (5c), which react readily with copper(I) salts to give mononuclear complexes [(TIMEN(t-Bu))Cu](PF(6)) (11b) and [(TIMEN(Bz))Cu]Br (11c). The solid-state structures of 10, 11b, and 11c were determined by single-crystal X-ray diffraction. While the TIMEN(Me) ligand yields trinuclear complex 10, with both T-shaped three-coordinate and linear two-coordinate copper(I) centers, the TIMEN(t-Bu) and TIMEN(Bz) ligands induce mononuclear complexes 11b and 11c, rendering the cuprous ion in a trigonal planar ligand environment of three carbenoid carbon centers and an additional, weak axial nitrogen interaction. Complexes 11b and 11c exhibit reversible one-electron redox events at half-wave potentials of 110 and -100 mV vs Fc/Fc(+), respectively, indicating sufficient electronic and structural flexibility of both TIMEN(R) ligands (R = t-Bu, Bz) to stabilize copper(I) and copper(II) oxidation states. Accordingly, a copper(II) NHC complex, [(TIMEN(Bz))Cu](OTf)(2) (12), was synthesized. Paramagnetic complex 12 was characterized by elemental analysis, EPR spectroscopy, and SQUID magnetization measurements.     

Boron and aluminum complexes of sterically demanding phosphinimines and phosphinimides

Reactions of sterically demanding phosphinimines R3PNH [R=i-Pr (1), t-Bu (2)] were examined. Reactions with B(C6F5)3 formed the adducts (R3PNH)B(C6F5)3 [R=i-Pr (3), t-Bu (4)] in high yield. On the other hand, 2 reacts with HB(OBu)2, evolving H2 to give t-Bu3PNB(OBu)2 (5). The reaction of 2 equiv of 2 with BH3.SMe2 affords the species (t-Bu3PN)2BH (6). In contrast, the reaction of n-Bu(t-Bu)2PNH with BH3.SMe2 results in the formation of the robust adduct n-Bu(t-Bu)2PNH.BH3 (8). An alternative route to borane-phosphinimide complexes involves Me3SiCl elimination, as exemplified by the reaction of BCl2Ph with n-Bu3PNSiMe3, which gives the product n-Bu3PNBCl(Ph) (9). The corresponding reactions of the parent phosphinimines 1 and 2 with AlH3.NMe2Et give the dimers [(mu-i-Pr3PN)AlH2]2 (10) and [(mu-t-Bu3PN)AlH2]2 (11). Species 11 reacts further with Me3SiO3SCF3 to provide [(mu-t-Bu3PN)AlH(OSO2CF3)]2 (12). The reaction of the lithium salt [t-Bu3PNLi]4 (13) with BCl3 proceeds smoothly to give t-Bu3PNBCl2 (14), which is readily alkylated to give t-Bu3PNBMe2 (15). Subsequent reaction of 15 with B(C6F5)3 results in methyl abstraction and the formation of [(mu-t-Bu3PN)BMe]2[MeB(C6F5)3]2 (16). The reaction of 13 in a 2:1 ratio with BCl3 gives the salt [(t-Bu3PN)2B]Cl (17). This species can be methylated to give (t-Bu3PN)2BMe (18), which undergoes subsequent reaction with [Ph3C][X] (X=[B(C6F5)4], [PF6]) to form the related salts [(t-Bu3PN)2B][B(C6F5)4] (19) and [(t-Bu3PN)2B][PF6] (20), respectively. Analogous reactions with [Ph3C][BF4] afforded [t-Bu3PNBF2]2 (21). Compounds 3, 4, 6, 8, 11, 12, 17, 19, and 21 were characterized by X-ray crystallography.     

Unusual nonoctahedral geometry with molybdenum oxoimido complexes containing η2-pyrazolate ligands

The preparation and oxygen-atom-transfer (OAT) reactivity of oxoimido complexes [MoO(N-t-Bu)(t-Bu(2)-4-Rpz)(2)] [where R = H (1), Br (2), and Me (3); t-Bu(2)pz = 3,5-di-tert-butylpyrazolate] are reported. The reaction of the potassium salt of the respective pyrazolate ligands and the molybdenum oxoimido precursor, [MoO(N-t-Bu)Cl(2)(dme)] (dme = dimethoxyethane), in toluene afforded complexes 1-3 in good yields. The complexes were fully characterized by (1)H and (13)C NMR and IR spectroscopy, mass spectrometry, elemental analysis, and single-crystal X-ray crystallography. The solid-state structures reveal that, in each case, the molybdenum center is coordinated by one oxo, one N-t-Bu group, and two sterically demanding pyrazolate ligands via their two adjacent nitrogen atoms in an η(2) fashion. Coordination around the metal center is severely distorted from octahedral and might be seen as closely approaching a distorted trigonal-prismatic geometry, which is relevant to the active site of dimethyl sulfoxide reductase in its oxidized form. The potential utility of all of the complexes 1-3 for OAT reactivity toward PMe(3) at room temperature is examined, and plausible mechanistic pathways are explored by density functional theory calculations. Furthermore, the complexes reported here open a new and convenient entry into mixed oxoimidomolybdenum complexes.     

Electron-transfer-catalyzed rearrangement of unsymmetrically substituted diiron dithiolate complexes related to the active site of the [FeFe]-hydrogenases

Novel asymmetrically substituted azadithiolate compounds [Fe2(CO)4(kappa2-dppe){micro-SCH2N(R)CH2S}] (R=iPr, 1a; CH2CH2OCH3, 1b; CH2C6H5, 1c) have been synthesized by treatment of [Fe2(CO)6(micro-adt)] [adt=SCH2N(R)CH2S, with R=iPr, CH2CH2OCH3, CH2C6H5] with dppe (dppe=Ph2PCH2CH2PPh2) in refluxing toluene in the presence of Me3NO. 1a-c have been characterized by single-crystal X-ray diffraction analyses. The electrochemical investigation of 1a-c and of [Fe2(CO)4(kappa2-dppe)(micro-pdt)] (1d) [pdt=S(CH2)3S] in MeCN- and THF-[NBu4][PF6] has demonstrated that the electrochemical reduction of 1a-d gives rise to an Electron-transfer-catalyzed (ETC) isomerization to the symmetrical isomers 2a-d where the dppe ligand bridges the iron centers. Compounds 2a-d were characterized by IR and NMR spectroscopy, elemental analysis, and X-ray crystallography for 2a.     

Synthesis, characterization, and reactivity of [Ru(bpy)(CH3CN)3(NO2)]PF6, a synthon for [Ru(bpy)(L3)NO2] complexes

We report a high yield, two-step synthesis of fac-[Ru(bpy)(CH3CN)3NO2]PF6 from the known complex [(p-cym)Ru(bpy)Cl]PF6 (p-cym = eta(6)-p-cymene). [(p-cym)Ru(bpy)NO2]PF6 is prepared by reacting [(p-cymene)Ru(bpy)Cl]PF6 with AgNO3/KNO2 or AgNO2. The 15NO2 analogue is prepared using K15NO2. Displacement of p-cymene from [(p-cym)Ru(bpy)NO2]PF6 by acetonitrile gives [Ru(bpy)(CH3CN)3NO2]PF6. The new complexes [(p-cym)Ru(bpy)NO2]PF6 and fac-[Ru(bpy)(CH3CN)3NO2]PF6 have been fully characterized by 1H and 15N NMR, IR, elemental analysis, and single-crystal structure determination. Reaction of [Ru(bpy)(CH3CN)3NO2]PF6 with the appropriate ligands gives the new complexes [Ru(bpy)(Tp)NO2] (Tp = HB(pz)3-, pz = 1-pyrazolyl), [Ru(bpy)(Tpm)NO2]PF6 (Tpm = HC(pz)3), and the previously prepared [Ru(bpy)(trpy)NO2]PF6 (trpy = 2,2',6',2' '-terpyridine). Reaction of the nitro complexes with HPF6 gives the new nitrosyl complexes [Ru(bpy)TpNO][PF6]2 and [Ru(bpy)(Tpm)NO][PF6]3. All complexes were prepared with 15N-labeled nitro or nitrosyl groups. The nitro and nitrosyl complexes were characterized by 1H and 15N NMR and IR spectroscopy, elemental analysis, cyclic voltammetry, and single-crystal structure determination for [Ru(bpy)TpNO][PF6]2. For the nitro complexes, a linear correlation is observed between the nitro 15N NMR chemical shift and 1/nu(asym), where nu(asym) is the asymmetric stretching frequency of the nitro group.     

(Fluoren-9-ylidene)methanedithiolato complexes of platinum: synthesis, reactivity, and luminescence

Platinum(II) complexes with (fluoren-9-ylidene)methanedithiolato and its 2,7-di-tert-butyl- and 2,7-dimethoxy-substituted analogues were obtained by reacting different chloroplatinum(II) precursors with the piperidinium dithioates (pipH)[(2,7-R2C12H6)CHCS2] [R = H (1a), t-Bu (1b), or OMe (1c)] in the presence of piperidine. The anionic complexes Q2[Pt{S(2)C=C(C12H6R(2)-2,7)}2] [R = H, (Pr(4)N)(2)2a; R = t-Bu, (Pr4N)(2)2b, (Et4N)(2)2b; R = OMe, (Pr4N)(2)2c] were prepared from PtCl(2), piperidine, the corresponding QCl salt, and 1a-c in molar ratio 1:2:2:2. In the absence of QCl, the complexes (pipH)(2)2b and [Pt(pip)(4)]2b were isolated depending on the PtCl(2):pip molar ratio. The neutral complexes [Pt{S2C=C(C12H6R(2)-2,7)L(2)] [L = PPh(3), R = H (3a), t-Bu (3b), OMe (3c); L = PEt(3), R = H (4a), t-Bu (4b), OMe (4c); L(2) = dbbpy, R = H (5a), t-Bu (5b), OMe (5c) (dbbpy = 4,4'-di-tert-butyl-2,2'-bipyridyl)] were similarly prepared from the corresponding precursors [PtCl2L2] and 1a-c in the presence of piperidine. Oxidation of Q(2)2b with [FeCp2]PF6 afforded the mixed Pt(II)-Pt(IV) complex Q2[Pt2{S2C=C[C12H6(t-Bu)(2)-2,7]}4] (Q(2)6, Q = Et4N+, Pr4N+). The protonation of (Pr4N)(2)2b with 2 equiv of triflic acid gave the neutral dithioato complex [Pt2{S2CCH[C12H6(t-Bu)(2)-2,7]}4] (7). The same reaction in 1:1 molar ratio gave the mixed dithiolato/dithioato complex Pr4N[Pt{S2C=C[C12H6(t-Bu)(2)-2,7]}{S2CCH[C12H6(t-Bu)(2)-2,7]}] (Pr(4)N8) while the corresponding DMANH+ salt was obtained by treating 7 with 2 equiv of 1,8-bis(dimethylamino)naphthalene (DMAN). The crystal structures of 3b and 5c.CH2Cl2 have been solved by X-ray crystallography. All the platinum complexes are photoluminescent at 77 K in CH2Cl2 or KBr matrix, except for Q(2)6. Compounds 5a-c and Q8 show room-temperature luminescence in fluid solution. The electronic absorption and emission spectra of the dithiolato complexes reveal charge-transfer absorption and emission energies which are significantly lower than those of analogous platinum complexes with previously described 1,1-ethylenedithiolato ligands and in most cases compare well to those of 1,2-dithiolene complexes.     

Iron-molybdenum charge-transfer hybrids containing organometallic and inorganic fragments bridged by aryldiazenido ligands in a mu-eta(6):eta(1) coordination mode: syntheses, characterization, X-ray structures, electrochemistry, and theoretical investigation

Representative members of a new family of covalently bonded charge-transfer molecular hybrids, of general formula [(eta5-C5H5)Fe(mu,eta6:eta1-p-RC6H4NN)Mo(eta2-S2CNEt2)3] +PF6- (R: H, 5+PF6-; Me, 6+PF6-; MeO, 7+PF6-) and [(eta5-C5Me5)Fe(mu,eta6:eta1-C6H5NN)Mo(eta2-S2CNEt2)3]+PF6-, 8+PF6-, have been synthesized by reaction of the corresponding mixed-sandwich organometallic hydrazines [(eta5-C5H5)Fe(eta6-p-RC6H4NHNH2)]+PF6- (R: H, 1+PF6-; Me, 2+PF6-; MeO, 3+PF6-) and [(eta5-C5Me5)Fe(eta6-C6H5NHNH2)]+PF6-, 4+PF6-, with cis-dioxomolybdenum(VI) bis(diethyldithiocarbamato) complex, [MoO2(S2CNEt2)2], in the presence of sodium diethyldithiocarbamato trihydrate, NaSC(=S)NEt2.3H2O, in refluxing methanol. These iron-molybdenum complexes consist of organometallic and inorganic fragments linked each other through a pi-conjugated aryldiazenido bridge coordinated in eta6 and eta1 modes, respectively. These complexes were fully characterized by FT-IR, UV-visible, and 1H NMR spectroscopies and, in the case of complex 7+PF6-, by single-crystal X-ray diffraction analysis. Likewise, the electrochemical and solvatochromic properties were studied by cyclic voltammetry and UV-visible spectroscopy, respectively. The electronic spectra of these hybrids show an absorption band in the 462-489 and 447-470 nm regions in CH2Cl2 and DMSO, respectively, indicating the existence of a charge-transfer transition from the inorganic donor to the organometallic acceptor fragments through the aryldiazenido spacer. A rationalization of the properties of 5+PF6--8+PF6- is provided through DFT calculations on a simplified model of 7+PF6-. Besides the heterodinuclear complexes 5+PF6--8+PF6-, the mononuclear molybdenum diazenido derivatives, [(eta1-p-RC6H4NN)Mo(eta2-S2CNEt2)3] (R: H, 9; Me, 10; MeO, 11), resulting from the decoordination of the [(eta5-C5H5)Fe]+ moiety of complexes 5+PF6--7+PF6-, were also isolated. For comparative studies, the crystalline and molecular structure of complex 10.Et2O was also determined by X-ray diffraction analysis and its electronic structure computed.     

Facile access to redox-active C2-bridged complexes with half-sandwich manganese end groups

The dinuclear mixed-valent complex [(MeC5H4)(dmpe)MnC(2)Mn(dmpe)(C5H4Me)](+)[(eta2-MeC5H4)3Mn](-)[1](+)[2]- (dmpe=1,2-bis(dimethylphosphanyl)ethane) was prepared by the reaction of [Mn(MeC5H4)2] with dmpe and Me(3)SnC[triple chemical bond]CSnMe3. The reactions of [1](+)[2]- with K[PF6] and Na[BPh4] yielded the corresponding anion metathesis products [(MeC5H4)(dmpe)MnC2Mn(dmpe)(C5H4Me)][PF6] ([1][PF6]) and [(MeC5H4)(dmpe)MnC2Mn(dmpe)(C5H4Me)][BPh4] ([1][BPh4]). These mixed-valent species can be reduced to the neutral form by reaction with Na/Hg. The obtained complex [(MeC5H4)(dmpe)MnC2Mn(dmpe)(C5H4Me)] (1) displays a triplet/singlet spin equilibrium in solution and in the solid state, which was additionally studied by DFT calculations. The diamagnetic dicationic species [(MeC5H4)(dmpe)MnC2Mn(dmpe)(C5H4Me)][PF6]2 ([1][PF6]2) was obtained by oxidizing the mixed-valent complex [1][PF6] with one equivalent of [Fe(C5H5)2][PF6]. Both redox processes are fully reversible. The dinuclear compounds were characterized by NMR, IR, UV-visible, and Raman spectroscopy, cyclic voltammetry, and magnetic susceptibility measurements. X-ray diffraction studies were performed on [1][2], [1][PF6], [1][BPh4], and [1][PF6]2.     

3,5-Dimethyl and 3,5-di-tert-butylpyrazolato complexes with alkali metals: monomeric, dimeric, cluster, and 1D chain structures

The pyrazolato complexes [(Me(2)pz)(THF)Li] (1), [((t)Bu(2)pz)Li](4) (2), [((t)Bu(2)pzH)((t)()Bu(2)pz)Li](2) (2a), [(Me(2)pz)Na] (3), [((t)Bu(2)pz)Na](4), [((t)Bu(2)pz)(6)(OH)Na(7)] (4a), [((t)Bu(2)pz)(18-crown-6)Na] (4b), and [((t)Bu(2)pz)K] (5) were synthesized by metalation reactions between R(2)pzH (R = Me, (t)()Bu) and alkyllithium, elemental sodium, or potassium. All the complexes were characterized by spectroscopic methods and microanalysis, and in addition, the crystal structures of 2, 2a, 3, 4a, 4b, and 5 were obtained by single-crystal X-ray diffraction. They show monomeric, dimeric, cluster, and 1D chain structures in the solid state. Ab initio calculations on the structure and stabilities of the monomeric pzM complexes were performed at the MP2 level of theory showing good agreement with the coordination preferences of the pyrazolato ligand to a particular alkali ion.     

Interactions of Rh(III)-dihydrido-bis(phosphine) complexes with semicarbazones

Interaction of cis,trans,cis-[Rh(H)2(PR3)2(acetone)2]PF6 complexes (R = aryl or R3 = Ph2Me, Ph2Et) under H2 with E-semicarbazones gives the Rh(III)-dihydrido-bis(phosphine)-semicarbazone species cis,trans-[Rh(H)2(PR3)2{R'(R' ')C=N-N(H)CONH2}]PF6, where R' and R' ' are Ph, Et, or Me. The complexes are generally characterized by elemental analysis, 31P{1H} NMR, 1H NMR, and IR spectroscopies, and MS. X-ray analysis of three PPh3 complexes reveals chelation of E-semicarbazones by the imine-N atom and the carbonyl-O atom. In contrast, the corresponding reaction of [Rh(H)2(PPhMe2)2(acetone)2]PF6 with acetophenone semicarbazone gives the ortho-metalated-semicarbazone species cis-[RhH(PPhMe2)2{o-C6H4(Me)C=N-N(H)CONH2}]PF6. The X-ray structure of E-propiophenone semicarbazone is also reported. Rhodium-catalyzed, homogeneous hydrogenation of semicarbazones was not observed even at 40 atm H2.     

Generation and coupling of [Mn(dmpe)2(C triple bond CR)(C triple bond C)]* radicals producing redox-active C4-bridged rigid-rod complexes

The symmetric d(5) trans-bis-alkynyl complexes [Mn(dmpe)(2)(C triple bond CSiR(3))(2)] (R = Me, 1 a; Et, 1 b; Ph, 1 c) (dmpe = 1,2-bis(dimethylphosphino)ethane) have been prepared by the reaction of [Mn(dmpe)(2)Br(2)] with two equivalents of the corresponding acetylide LiC triple bond CSiR(3). The reactions of species 1 with [Cp(2)Fe][PF(6)] yield the corresponding d(4) complexes [Mn(dmpe)(2)(C triple bond CSiR(3))(2)][PF(6)] (R = Me, 2 a; Et, 2 b; Ph, 2 c). These complexes react with NBu(4)F (TBAF) at -10 degrees C to give the desilylated parent acetylide compound [Mn(dmpe)(2)(C triple bond CH)(2)][PF(6)] (6), which is stable only in solution at below 0 degrees C. The asymmetrically substituted trans-bis-alkynyl complexes [Mn(dmpe)(2)(C triple bond CSiR(3))(C triple bond CH)][PF(6)] (R = Me, 7 a; Et, 7 b) related to 6 have been prepared by the reaction of the vinylidene compounds [Mn(dmpe)(2)(C triple bond CSiR(3))(C=CH(2))] (R = Me, 5 a; Et, 5 b) with two equivalents of [Cp(2)Fe][PF(6)] and one equivalent of quinuclidine. The conversion of [Mn(C(5)H(4)Me)(dmpe)I] with Me(3)SiC triple bond CSnMe(3) and dmpe afforded the trans-iodide-alkynyl d(5) complex [Mn(dmpe)(2)(C triple bond CSiMe(3))I] (9). Complex 9 proved to be unstable with regard to ligand disproportionation reactions and could therefore not be oxidized to a unique Mn(III) product, which prevented its further use in acetylide coupling reactions. Compounds 2 react at room temperature with one equivalent of TBAF to form the mixed-valent species [[Mn(dmpe)(2)(C triple bond CH)](2)(micro-C(4))][PF(6)] (11) by C-C coupling of [Mn(dmpe)(2)(C triple bond CH)(C triple bond C*)] radicals generated by deprotonation of 6. In a similar way, the mixed-valent complex [[Mn(dmpe)(2)(C triple bond CSiMe(3))](2)(micro-C(4))][PF(6)] [12](+) is obtained by the reaction of 7 a with one equivalent of DBU (1,8-diazabicyclo[5.4.0]undec-7-ene). The relatively long-lived radical intermediate [Mn(dmpe)(2)(C triple bond CH)(C triple bond C*)] could be trapped as the Mn(I) complex [Mn(dmpe)(2)(C triple bond CH)(triple bond C-CO(2))] (14) by addition of an excess of TEMPO (2,2,6,6-tetramethyl-1-piperidinyloxy) to the reaction mixtures of species 2 and TBAF. The neutral dinuclear Mn(II)/Mn(II) compounds [[Mn(dmpe)(2)(C triple bond CR(3))](2)(micro-C(4))] (R = H, 11; R = SiMe(3), 12) are produced by the reduction of [11](+) and [12](+), respectively, with [FeCp(C(6)Me(6))]. [11](+) and [12](+) can also be oxidized with [Cp(2)Fe][PF(6)] to produce the dicationic Mn(III)/Mn(III) species [[Mn(dmpe)(2)(C triple bond CR(3))](2)(micro-C(4))][PF(6)](2) (R = H, [11](2+); R = SiMe(3), [12](2+)). Both redox processes are fully reversible. The dinuclear compounds have been characterized by NMR, IR, UV/Vis, and Raman spectroscopies, CV, and magnetic susceptibilities, as well as elemental analyses. X-ray diffraction studies have been performed on complexes 4 b, 7 b, 9, [12](+), [12](2+), and 14.     

Synthesis, spectroscopic, and structural studies on transition metal complexes involving homoleptic tripodal selenoether and telluroether coordination

The reaction of [MCl2(NCMe)2] (M = Pd or Pt) with 2 molar equiv of MeC(CH2ER)3 (E = Se, R = Me; E = Te, R = Me or Ph) and 2 molar equiv of TlPF6 affords the bis ligand complexes [M(MeC(CH2ER)3)2][PF6]2. The crystal structure of [Pt(MeC(CH2SeMe)3)2][PF6]2 (C16H36F12P2PtSe6, a = 12.272(10) A, b = 18.563(9) A, c = 15.285(7) A, beta = 113.18(3) degrees, monoclinic, P2(1)/n, Z = 4) confirms distorted square planar Se4 coordination at Pt(II), derived from two bidentate tripod selenoethers with the remaining arm not coordinated and directed away from the metal center. Solution NMR studies indicate that these species are fluxional and that the telluroether complexes are rather unstable in solution. The octahedral bis tripod complexes [Ru(MeC(CH2SMe)3)2][CF3-SO3]2 and [Ru(MeC(CH2TePh)3)2][CF3SO3]2 are obtained from [Ru(dmf)6][CF3SO3]3 and tripod ligand in EtOH solution. The thioether complex (C18H36F6O6RuS8, a = 8.658(3) A, b = 11.533(3) A, c = 8.659(2) A, alpha = 108.33(2) degrees, beta = 91.53(3) degrees, gamma = 106.01(2) degrees, triclinic, P1, Z = 1) is isostructural with its selenoether analogue, involving two facially coordinated trithioether ligands in the syn configuration. NMR spectroscopy confirms that this configuration is retained in solution for all of the bis tripod Ru(II) complexes. These low-spin d6 complexes show unusually high ligand field splittings. The hexaselenoether Rh(III) complex [Rh(MeC(CH2SeMe)3)2][PF6]3 was obtained by treatment of [Rh(H2O)6]3+ with 2 molar equiv of MeC(CH2SeMe)3 in aqueous MeOH in the presence of excess PF6- anion, while the iridium(III) analogue [Ir(MeC(CH2SeMe)3)2][PF6]3 was obtained via the reaction of the Ir(I) precursor [IrCl(C8H14)2]2 with the selenoether tripod in MeOH/aqueous HBF4. NMR studies reveal different invertomers in solution for both the Rh and Ir species. The Cu(I) complexes [Cu(MeC(CH2ER)3)2]PF6 were obtained from [Cu(NCMe)4]PF6 and tripod ligand in CH2Cl2 solution. The corresponding Ag(I) species [Ag(MeC(CH2TeR)3)2]CF3SO3 (R = Me or Ph) were obtained from Ag[CF3SO3] and tripod telluroether. In contrast, a similar reaction with 2 molar equiv of MeC(CH2SeMe)3 afforded only the 1:1 complex [Ag(MeC(CH2SeMe)3)]CF3SO3. The structure of this species (C9H18AgF3O3SSe3, a = 8.120(3) A, b = 15.374(3) A, c = 14.071(2) A, beta = 93.86(2) degrees, monoclinic, P2(1)/n, Z = 4) reveals a distorted trigonal planar geometry at Ag(I) derived from one bidentate selenoether and one monodentate selenoether. These units are then linked to adjacent Ag(I) ions to give a one-dimensional linear chain cation.     

Cu(I) dinuclear complexes with tripodal ligands vs monodentate donors: triphenylphosphine, thiourea, and pyridine. A 1H NMR titration study

Complexes [PPh3Cu(Tr(Mes,Me))] (1), [PPh3Cu(Tr(Me,o-Py))] (2), and [PPh3Cu(Br(Mes)pz(o-Py))] (3) (Tr(Mes,Me) = hydrotris[1,4-dihydro-3-methyl-4-mesityl-5-thioxo-1,2,4-triazolyl]borate; Tr(Me,o-Py) = hydrotris[1,4-dihydro-4-methyl-3-(2-pyridyl)-5-thioxo-1,2,4-triazolyl]borate; Br(Mes)pz(o-Py) = hydro[bis(thioxotriazolyl)-3-(2-pyridyl)pyrazolyl]borate; PPh3 = triphenylphosphine) were synthesized by the reaction of dinuclear complexes [Cu(Tr(Mes,Me))]2, [Cu(Tr(Me,o-Py))]2, [Cu(Br(Mes)pz(o-Py))]2, and PPh3. 1-3 were characterized by 1H, 13C, and 31P NMR spectroscopy and ESI-mass spectrometry. Crystal structure analyses were performed for 1 and 2. Both complexes crystallize in the triclinic P space group with the metal in a slightly distorted tetrahedral geometry (S3P coordination) bound by a kappa3-S3 ligand and a PPh3 molecule. The solution molecular structures were investigated by means of variable-temperature (210-310 K, CDCl3, 1-2; 200-310 K, CD2Cl2, 3) and NOESY NMR spectroscopy. The solution structures of 1-2 are in accordance with the X-ray structures, and the complexes do not exhibit fluxional behavior. On the other hand, 3 is subject to an equilibrium between two species with a coalescing temperature of approximately 260 K. DFT geometry optimizations suggest that the major species of 3 consists of the Br(Mes)pz(o-Py) ligand bound to Cu(I) in the kappa3-S2H fashion with two C=S groups and a [Cu...H-B] interaction. A PPh3 completes the copper coordination (S2HP coordination). The complex [TuCu(Tr(Mes,Me))] (4) (Tu = thiourea) was crystallized using an excess of Tu with respect to [Cu(Tr(Me,2-Py))]2 (approximately a 6:1 ratio). The metal adopts a distorted tetrahedral geometry with an overall S3H coordination determined by the bound kappa3-S2H ligand (two C=S groups and a [B-H...Cu] interaction) and by a Tu. The reactivity of dinuclear complexes [Cu(Tr(Mes,Me))]2, [Cu(Tr(Me,o-Py))]2, and [Cu(Br(Mes)pz(o-Py))]2 with monodentate ligands was investigated by means of NMR titrations with PPh3, Tu. and pyridine (Py), and formation constants for the adducts [DCu(L)] (D = monodentate donor, L = tripodal ligand) were determined.     

Synthesis, structures and reactions of lithium complexes of [(o-RCHC6H4)PPh2=NSiMe3]-(R = H, SiMe3) ligands

N-Trimethylsilyl o-methylphenyldiphenylphosphinimine, (o-MeC6H4)PPh2=NSiMe3 (1), was prepared by reaction of Ph2P(Br)=NSiMe3 with o-methylphenyllithium. Treatment of 1 with LiBun and then Me3SiCl afforded (o-Me3SiCH2C6H4)PPh2=NSiMe3 (2). Lithiations of both 1 and 2 with LiBu(n) in the presence of tmen gave crystalline lithium complexes [Li{CH(R)C6H4(PPh(2=NSiMe3)-.tmen](3, R = H; 4, R = SiMe3). From the mother liquor of 4, traces of the tmen-bridged complex [Li{CH(SiMe3)C6H4(PPh2=NSiMe3)-2}]2(mu-tmen) (5) were obtained. Reaction of 2 with LiBun in Et2O yielded complex [Li{CH(SiMe3)C6H4(PPh2=NSiMe3)-2}.OEt2] (6). Reaction of lithiated with Me2SiCl2 in a 2:1 molar ratio afforded dimethylsilyl-bridged compound Me2Si[CH2C6H4(PPh2=NSiMe3)-2]2 (7). Lithiation of 7 with two equivalents of LiBun in Et2O yielded [Li2{(CHC6H4(PPh2=NSiMe3)-2)2SiMe2}.0.5OEt2](8.0.5OEt2). Treatment of 4 with PhCN formed a lithium enamide complex [Li{N(SiMe3)C(Ph)CHC6H4(PPh2=NSiMe3)-2}.tmen] (9). Reaction of two equivalents of 5 with 1,4-dicyanobenzene gave a dilithium complex [{Li(OEt2)2}2(1,4-{C(N(SiMe3)CHC6H4(PPh2=NSiMe3)-2}2C6H4)] (10). All compounds were characterised by NMR spectroscopy and elemental analyses. The structures of compounds 2, 3, 5, 6 and 9 have been determined by single crystal X-ray diffraction techniques.     

Synthesis and structural characterization of mono- and bisfunctional o-carboranes

Functionalized o-carboranes are interesting ligands for transition metals. Reaction of LiC2B10H11 with Me2NCH2CH2Cl in toluene afforded 1-Me2NCH2CH2-1,2-C2B10H11 (1). Treatment of 1 with 1 equiv. of n-BuLi gave [(Me2NCH2CH2)C2B10H10]Li ([1]Li), which was a very useful synthon for the production of bisfunctional o-carboranes. Reaction of [1]Li with RCH2CH2Cl afforded 1-Me2NCH2CH2-2-RCH2CH2-1,2-C2B10H10 (R = Me2N (2), MeO (3)). 1 and 2 were also prepared from the reaction of Li2C2B10H10 with excess Me2NCH2CH2Cl. Treatment of [1]Li with excess MeI or allyl bromide gave the ionic salts, [1-Me3NCH2CH2-2-Me-1,2-C2B10H10][I] (4) and [1-Me2N(CH2=CHCH2)CH2CH2-2-(CH2=CHCH2)-1,2-C2B10H10][Br] (6), respectively. Interaction of [1]Li with 1 equiv. of allyl bromide afforded 1-Me2NCH2CH2-2-(CH2=CHCH2)-1,2-C2B10H10 (5). Treatment of [1]Li with excess dimethylfulvene afforded 1-Me2NCH2CH2-2-C5H5CMe2-1,2-C2B10H10 (7). Interaction of [1]Li with excess ethylene oxide afforded an unexpected product 1-HOCH2CH2-2-(CH2=CH)-1,2-C2B10H10 (8). 1 and 3 were conveniently converted into the corresponding deborated compounds, 7-Me2NHCH2CH2-7,8-C2B9H11 (9) and 7-Me2NHCH2CH2-8-MeOCH2CH2-7,8-C2B9H10 (10), respectively, in MeOH-MeOK solution. All of these compounds were characterized by various spectroscopic techniques and elemental analyses. The solid-state structures of 4 and 6-10 were confirmed by single-crystal X-ray analyses.     

A cycle for organic nitrile synthesis via dinitrogen cleavage

In the presence of NaH, the reaction between N2 and Mo(N[t-Bu]Ar)3 (Ar = 3,5-C6H3Me2) proceeds at room temperature to afford NMo(N[t-Bu]Ar)3 (95%). Lewis acidic silyl triflates (Me3SiOTf + pyridine or (i-Pr)3SiOTf) mediate a reaction between acid chlorides and NMo(N[t-Bu]Ar)3 to yield acyl imidos [RC(O)NMo(N[t-Bu]Ar)3][OTf] (R = Me, 92%; Ph, 75%; t-Bu, 64%). The reduction of [RC(O)NMo(N[t-Bu]Ar)3][OTf] by magnesium anthracene followed by treatment with Me3SiOTf affords molybdenum ketimides, R(Me3SiO)CNMo(N[t-Bu]Ar)3 (R = Me, 82%; Ph, 77%; t-Bu, 46%). Exposing R(Me3SiO)CNMo(N[t-Bu]Ar)3 to SnCl2 or ZnCl2 produces ClMo(N[t-Bu]Ar)3 (71-93% for SnCl2) and RCN (97-99%). Magnesium metal reduces ClMo(N[t-Bu]Ar)3 to Mo(N[t-Bu]Ar)3 (74%), completing a synthetic cycle. New strategies for the functionalization of sterically hindered nitrides and nitrile extrusion from d2 ketimides are presented in the context of a new route for derivatizing N2.     

Synthesis and structures of selected triazapentadienate of Li, Mn, Fe, Co, Ni, Cu(I), and Cu(II) using 2,4-N,N'-disubstituted 1,3,5-triazapentadienate anions as ancillary ligands: [N(Ar)C(NMe2)NC(NMe2)N(R)](-) (Ar = Ph, 2,6-(i)Pr2-C6H3; R = H, SiMe3)

Addition reaction of ArN(SiMe 3)M (Ar = Ph or 2,6 - (i) Pr 2-C 6H 3 (Dipp); M = Li or Na) to 2 equivalents of alpha-hydrogen-free nitrile RCN (R = dimethylamido) gave the dimeric [M{N(Ar)C(NMe 2)NC(NMe 2)N(SiMe 3)}] 2 ( 1a, Ar = Ph, M = Li; 1b, Ar = Ph, M = Na; 1c, Ar = Dipp, M = Li). 1d was obtained by hydrolysis of 1c at ambient temperature. Treatment of a double ratio of 1a or 1b with anhydrous MCl 2 (M = Mn, Fe, Co) yielded the 1,3,5-triazapentadienato complexes [M{N(Ph)C(NMe 2)NC(NMe 2)N(SiMe 3)} 2] (M = Mn, 2; Fe, 3; Co, 4) and with NiCl 2.6H 2O gave [M{N(Ph)C(NMe 2)NC(NMe 2)N(H)} 2] (M = Ni, 5). Treatment of an equiv of 1c with anhydrous CuCl in situ and in air led to complexes [{N(Dipp)C(NMe 2)NC(NMe 2)N(SiMe 3)}CuPPh 3] 6 and [Cu{N(Dipp)C(NMe 2)NC(NMe 2)N(H)} 2] 7, respectively. 1c, 1d, and 2- 7 were characterized by X-ray crystallography and microanalysis. 1c, 1d, 5, and 6 were well characterized by (1)H, (13)C NMR, 1c by (7)Li, and 6 by (31)P NMR as well. The structural features of these complexes were described in detail.     

Synthesis of zirconium, hafnium, and tantalum complexes with sterically demanding hydrazide ligands

The bulky hydrazine t-BuN(H)NMe2 was synthesized via hydrazone and t-BuN(H)N(H)Me intermediates as the major component in a 90:5:5 mixture consisting of t-BuN(H)NMe2, t-BuN(Me)N(H)Me, and t-BuN(Me)NMe2. Reacting the mixture with n-BuLi followed by distillation and fractional crystallization led to the isolation of the ligand precursor LiN(t-Bu)NMe2. Lithium hydrazides, LiN(R)NMe2, were reacted with metal chlorides to afford the hydrazide complexes M(N(Et)NMe2)4 (M = Zr or Hf), MCl(N(R)NMe2)3 (M = Zr, R = i-Pr or t-Bu; M = Hf, R = t-Bu), and TaCl3(N(i-Pr)NMe2)2. The X-ray crystal structures of [LiN(i-Pr)NMe2]4, [LiN(t-Bu)NMe2.THF]2, ZrCl(N(R)NMe2)3 (R = i-Pr or t-Bu), and TaCl3(N(i-Pr)NMe2)2 were determined. The structural analyses revealed that the hydrazide ligands in ZrCl(N(R)NMe2)3 (R = i-Pr or t-Bu) and TaCl3(N(i-Pr)NMe2)2 are eta2 coordinated.     

三(三甲硅基)环戊二烯基三羰基钼负离子的反应性

三(三甲硅基)环戊二烯基三羰基钼负离子锂盐[{η^5-(Me~3Si)~3C~5H~2}Mo(CO)~3]^-Li^+(1), 分别与MeI、phCH~2Cl及ClCH~2COOC~2H~5反应生成相应的烃基化钼衍生物[{η^5-(Me~3Si)~3C~5H~2}Mo(CO)~3R,] (R=-CH~3, 2; -CH~2ph, 3;-CH~2COOC~2H~5, 4)。1与PCl~3反应除得到预期的钼氯化物[{η^5-(Me~3Si)~3C~5H~2}Mo(CO)~3Cl](5)外, 主要得到钼磷氯化物[{η^5-(Me~3Si)~3C~5H~2}Mo(CO)~3PCl~2] 6; 1与碘反应得到钼碘化物[{η^5-(Me~3Si)~3C~5H~2}Mo(CO)~3I] 7; 1与HOAc作用后分别和CCl~4、NBS室温反应, 仅分离到脱去一个Me~3Si的钼卤化物[{η^5-(Me~3Si)~2C~5H~2}Mo(CO)~3X], (X:Cl, 8; Br, 9)。