Subsolidus phase relations and crystal structures of R-Ca-Cu-O (R=Nd, Sm, Gd, Tm) systems

The subsolidus phase relations of R₂O₃-CaO-CuO ternary systems (R=Nd, Sm, Gd, Tm) have been investigated by X-ray powder diffraction. All samples were synthesized at about 950° in air. There exists a ternary compound Ca_14−xR_xCu₂₄O₄₁ (x = 4 for R=Nd, Gd and x = 5 for R = Sm) and a ternary solid solution Ca_2+xR_2−xCu₅O₁₀ (R=Nd, Sm, Gd, Tm) with a wide composition range Δx of about 0.6. The compound Ca_14−xR_xCu₂₄O₄₁ possesses a layered orthorhombic structure and is isostructural to Sr_14−xCa_xCu₂₄O₄₁. The lattice parameters a and c of the compound are basically independent of the ionic radius of R, while the lattice parameter b and unit-cell volume V decrease substantially with the decrease of the ionic radii of R. The Ca_2+xR_2−xCu₅O₁₀ solid solution is isostructural to Ca_2+xY_2−xCu₅O₁₀, the structure of which is based on an orthorhombic “NaCuO₂-type” subcell containing infinite one-dimensional chains of edge-shared square planar cuprate groups crosslinked by the layered cations Ca and R that locate in the inter-chain tunnels.     

Characterization of quasi-one-dimensional S=1/2 Heisenberg antiferromagnets Sr2Cu(PO4)2 and Ba2Cu(PO4)2 with magnetic susceptibility, specific heat, and thermal analysis

Properties of Sr₂Cu(PO₄)₂ and Ba₂Cu(PO₄)₂ having [Cu(PO₄)₂]_∞ linear chains in their structures with Cu-O-P-O-Cu linkages were studied by magnetic susceptibility (T=2-400 K, H=100 Oe) and specific heat measurements (T=0.45-21 K). Magnetic susceptibility versus temperature curves, χ(T), showed broad maxima at T_M=92 K for Sr₂Cu(PO₄)₂ and T_M=82 K for Ba₂Cu(PO₄)₂ characteristic of quasi-one-dimensional systems. The χ(T) data were excellently fitted by the spin susceptibility curve for the uniform S=1/2 chain (plus temperature-independent and Curie-Weiss terms) with g=2.153(4) and J/k_B=143.6(2) K for Sr₂Cu(PO₄)₂ and g=2.073(4) and J/k_B=132.16(9) K for Ba₂Cu(PO₄)₂ (Hamiltonian H=JΣS_iS_i+1). The similar J/k_B values were obtained from the specific heat data. No anomaly was observed on the specific heat from 0.45 to 21 K for both compounds indicating that the temperatures of long-range magnetic ordering, T_N, were below 0.45 K. Sr₂Cu(PO₄)₂ and Ba₂Cu(PO₄)₂ are an excellent physical realization of the S=1/2 linear chain Heisenberg antiferromagnet with k_BT_N/J<0.34% together with Sr₂CuO₃ (k_BT_N/J≈0.25%) and γ-LiV₂O₅ (k_BT_N/J<0.16%). Sr₂Cu(PO₄)₂ and Ba₂Cu(PO₄)₂ were stable in air up to 1280 and 1150 K, respectively.     

Oxygen nonstoichiometry and chemical stability of Nd2−xSrxNiO4+δ

Nonstoichiometric variation of oxygen content in Nd_2−xSr_xNiO_4+δ (x=0, 0.2, 0.4) and decomposition P(O₂) were determined by means of high temperature gravimetry and coulometric titration. The measurements were carried out in the temperature range from 873 to 1173 K and the P(O₂) range from 10⁻²⁰ to 1 bar. Nd_2−xSr_xNiO_4+δ shows the oxygen excess and the oxygen deficient composition depending on P(O₂), temperature, and the Sr content. To evaluate the characteristics of oxygen nonstoichiometric behavior, partial molar enthalpy of oxygen was calculated. The value of partial molar enthalpy of oxygen slightly approaches zero as δ increases in the oxygen excess region while that is independent of δ in the oxygen deficient region. Discussion was made by comparing data of this study with nonstoichiometric and thermodynamic data of La_2−xSr_xNiO_4+δ: Nd_2−xSr_xNiO_4+δ show more oxygen excess than La_2−xSr_xNiO_4+δ in the higher P(O₂) region, while the nonstoichiometric behavior in the oxygen deficient composition is almost the same. The variation of partial molar enthalpy of oxygen with δ for Nd_2−xSr_xNiO_4+δ in the oxygen excess region is much smaller than that of La_2−xSr_xNiO_4+δ. The oxygen nonstoichiometric behavior of Nd_2−xSr_xNiO_4+δ is more ideal-solution-like than that of La_2−xSr_xNiO_4+δ.     

Exchange interactions in R2Fe17−xGax (R=Y, Sm, Gd, Tb, Ho and Tm) compounds

We calculated the molecular field coefficients, n_FeFe and n_RFe (R=Sm, Gd, Tb, Ho and Tm), for R₂Fe_17−xGa_x and the values of n_FeFe and n_SmFe for R₂Fe_17−xT_x (T=Al and Si) using the experimental values of the Curie temperature. The values of n_FeFe increase in spite of the decrease of μ_Fe for 0?x?5. The values of n_SmFe have large values when the magnetic anisotropy is axial. For 6?x?8, the values of n_FeFe, n_HoFe and n_TmFe increase largely, which is related to the change of the easy magnetization direction. For Y₂Fe_17−xT_x (T=Ga and Al), the values of n_FeFe have a maximum value with increasing those of μ_Fe. With increasing V⁻¹, the values of n_FeFe have a maximum value around the same value of V⁻¹ for Y₂Fe_17−xT_x (T=Ga and Al). For Y₂Fe_17−xSi_x, the values of n_FeFe increase with increasing V⁻¹.     

Relationship between interlayer hydration and photocatalytic water splitting of A′1−xNaxCa2Ta3O10·nH2O (A′=K and Li)

Partial replacement of alkaline metals in anhydrous KCa₂Ta₃O₁₀ and LiCa₂Ta₃O₁₀ was studied to control interlayer hydration and photocatalytic activity for water splitting under UV irradiation. A′_1−xNa_xCa₂Ta₃O₁₀·nH₂O (A′=K and Li) samples were synthesized by ion exchange of CsCa₂Ta₃O₁₀ in mixed molten nitrates at 400 °C. In K_1−xNa_xCa₂Ta₃O₁₀·nH₂O, two phases with the orthorhombic (C222) and tetragonal (I4/mmm) structures were formed at x?0.7 and x?0.5, respectively. Upon replacement by Na⁺ having a larger enthalpy of hydration (ΔH_h⁰), the interlayer hydration occurred at x?0.3 and the hydration number (n) was increased monotonically with an increase of x. Li_1−xNa_xCa₂Ta₃O₁₀·nH₂O showed a similar hydration behavior, but the phase was changed from I4/mmm (x<0.5, n∼0) via P4/mmm (x∼0.5, n∼1) to I4/mmm (x∼1.0, n∼2). The photocatalytic activities of these systems after loading 0.5 wt% Ni were quite different each other. K_1−xNa_xCa₂Ta₃O₁₀·nH₂O exhibited the activity increasing in consistent with n, whereas Li_1−xNa_xCa₂Ta₃O₁₀·nH₂O exhibited the activity maximum at x=0.77, where the rates of H₂/O₂ evolution were nearly doubled compared with those for end-member compositions (x=0 and 1).     

Influence of Oxygen Nonstoichiometry on the Spectral Properties of Solid Solutions LaNb2−2xTa2xVO9−δ (x=0-0.4) and LaTa2−2xNb2xVO9−δ (x=0-0.1)

Phase equilibria in the LaVO₄-Nb₂O₅-Ta₂O₅ system were analyzed. New solid solutions LaTa_2−2xNb_2xVO_9−δ (x=0-0.1) and LaNb_2−2xTa_2xVO_9−δ (x=0-0.4) were detected in this system. The structures of the vanadate-niobate LaNb₂VO₉ and vanadate-tantalate LaTa₂VO₉ are not known. The structures of the vanadate-tantalate LaTa₂VO₉ and LaTa₂VO₉-based solid solutions are similar to the structure of LaTa₇O₁₉, which refers to the hexagonal crystal system. The influence of the oxygen nonstoichiometry δ(x) on crystallochemical characteristics and spectral properties of these solid solutions were examined by the X-ray phase analysis, IR and radio spectroscopic methods. A correlation between the nonstoichiometry δ(x) and the volume of a unit cell V(x) of solid solutions LaTa_2−2xNb_2xVO_9−δ was found. The IR spectrum of LaTa₂VO_9−δ transformed in going from δ=0 to δ≠0. Two types of VO₄ tetrahedra were formed in solid solutions LaNb_2−2xTa_2xVO_9−δ depending on δ(x).     

Synthesis and crystal structure of Ln2MGe4O12, Ln=rare-earth element or Y; M=Ca, Mn, Zn

The crystal structure of the promising optical materials Ln₂M²⁺Ge₄O₁₂, where Ln=rare-earth element or Y; M=Ca, Mn, Zn and their solid solutions has been studied in detail. The tendency of rare-earth elements to occupy six- or eight-coordinated sites upon iso- and heterovalent substitution has been studied for the Y_2−xEr_xCaGe₄O₁₂ (x=0-2), Y_2−2xCe_xCa_1+xGe₄O₁₂ (x=0-1), Y₂Ca_1−xMn_xGe₄O₁₂ (x=0-1) and Y_2−xPr_xMnGe₄O₁₂ (x=0-0.5) solid solutions. A complex heterovalent state of Eu and Mn in Eu₂MnGe₄O₁₂ has been found.     

Mixed oxides of sodium, antimony (5+) and divalent metals (Ni, Co, Zn or Mg)

A family of α-NaFeO₂-type oxides Na_xM_(1+x)/3Sb_(2−x)/3O₂ (M=Ni, Co, Zn, Mg; x≈0.8 or 0.9) has been prepared by solid state reactions and characterized by powder XRD. At x=1, ordering occurs with tripling the unit cells and formula units. The powder patterns for Na₃M₂SbO₆ (M=Ni, Co) comply with both trigonal P3₁12 cell and monoclinic C2/m cell. The Ni compound exhibits also a series of extremely weak reflections (I<0.3%) that need doubling of the c axis, and the final cell is C2/c, a=5.3048(3), b=9.1879(4), c=10.8356(7), β=99.390(5). These ambiguities are explained by stacking faults. The compounds absorb atmospheric moisture with c-axis expansion up to 29%. A delafossite-related superlattice Ag₃Co₂SbO₆ has been prepared by ion exchange and refined: P3₁12, a=5.3842(2), c=18.6613(10). Ionic conductivity of the Na_0.8Ni_0.6Sb_0.4O₂ ceramics, 0.4 S/m at 300 °C, is greater than reported previously, presumably owing to the grain orientation produced by hot pressing.     

Charge compensation and oxidation in NaxCoO2−δ and LixCoO2−δ studied by XANES

A comparative study on the oxidation and charge compensation in the A_xCoO_2−δ systems, A=Na (x=0.75, 0.47, 0.36, 0.12) and Li (x=1, 0.49, 0.05), using X-ray absorption spectroscopy at O 1s and Co 2p edges is reported. Both the O 1s and Co 2p XANES results show that upon removal of alkali metal from A_xCoO_2−δ the valence of cobalt increases more in Li_xCoO_2−δ than in Na_xCoO_2−δ. In addition, the data of O 1s XANES indicate that charge compensation by oxygen is more pronounced in Na_xCoO_2−δ than in Li_xCoO_2−δ.     

Phase equilibria and crystal chemistry of the R-Cu-Ti-O systems (R=lanthanides and Y)

As part of the study of interaction of the Ba₂RCu₃O_6+z (R=lanthanides and Y) superconductor with SrTiO₃ buffer, phase equilibria of the subsystem, R₂O₃-TiO₂-CuO (R=Nd, Y, and Yb), have been investigated in air at 960 °C. While the phase relationships of the two phase diagrams with smaller R (Y and Yb) are similar, substantial differences were found in the Nd₂O₃-TiO₂-CuO system, partly due to different phase formation in the binary R₂O₃-TiO₂ and R₂O₃-CuO systems. R₂CuTiO₆ and R₂Cu₉Ti₁₂O₃₆ were the only ternary phases established in all the three diagrams. R₂Cu₉Ti₁₂O₃₆ belongs to the perovskite-related [AC₃](B₄)O₁₂ family which is cubic Im3. Depending on the size of R³⁺, R₂CuTiO₆ crystallizes in two crystal systems: Pnma (R=La-Gd), and P6₃cm (R=Dy-Lu). The structure and crystal chemistry of the Pnma series of R₂CuTiO₆ (R=La, Nd, Sm, Eu, and Gd) are discussed in detail in this paper. Patterns for selected members of R₂CuTiO₆ have also been prepared and submitted for inclusion in the Powder Diffraction File (PDF).     

Subsolidus phase relations and crystal structure of compounds in the PrOx-CaO-CuO system

The subsolidus phase relations of the PrO_x-CaO-CuO pseudo-ternary system sintered at 950-1000°C have been investigated by X-ray powder diffraction. In this system, there exist one compound Ca₁₀Pr₄Cu₂₄O₄₁, one Ca₂Pr₂Cu₅O₁₀-based solid solution, seven three-phase regions and two two-phase regions. The crystal structures of Ca₁₀Pr₄Cu₂₄O₄₁ and Ca₂Pr₂Cu₅O₁₀-based solid solution have been determined. Compound Ca₁₀Pr₄Cu₂₄O₄₁ crystallizes in an orthorhombic cell with space group D_2h²⁰−Cccm, Z=4. Its lattice parameters are a=11.278(2) Å, b=12.448(3) Å and c=27.486(8) Å. The crystal structure of Ca₂Pr₂Cu₅O₁₀-based solid solution is an incommensurate phase based on the orthorhombic NaCuO₂ type subcell. The lattice parameters of the subcell of the Ca_2.4Pr_1.6Cu₅O₁₀ are a₀=2.8246(7) Å, b₀=6.3693(5) Å, c₀=10.679(1) Å, and those of the orthorhombic superstructure are with a=5a₀, b=b₀, c=5c₀. The Ca_2.4Pr_1.6Cu₅O₁₀ structure can also be determined by using a monoclinic supercell with space group C_2h⁵−P2₁/c, Z=4, a=5a₀, b=b₀, and β=104.79(1)° or 136.60(1)°, V=5a₀b₀c₀.     

Synthesis and properties of the Co7Se8−xSx and Ni7Se8−xSx solid solutions

We report the synthesis and elementary properties of the Co₇Se_8−xS_x (x=0-8) and Ni₇Se_8−xS_x (x=0-7) solid solutions. Both systems form a NiAs-type structure with metal vacancies. In general, the lattice parameters decrease with increasing x, but in the Ni₇Se_8−xS_x system c increases on going from x=5 to 7. Magnetic susceptibility measurements show that all samples exhibit temperature-independent paramagnetism from 25-250 K. Samples within the Co₇Se_8−xS_x system, as well as Ni₇Se₈ and Ni₇SeS₇, were found to be poor metals with resistivities of ∼0.20 and ∼0.06 mΩ cm at 300 K, respectively. The Sommerfeld constant (γ) was determined from specific heat measurements to be ∼13 mJ/mol_CoK² and ∼7 mJ/mol_NiK² for Co₇Se_8−xS_x and Ni₇Se_8−xS_x, respectively.     

Atomistic simulation on the site preference and mechanical properties of Th3Co4+xAl12−x and U3Co4+xAl12−x

An atomistic study is presented on the phase stability, site preference and lattice constants of the actinide intermetallic compounds Th₃Co_4+xAl_12−x and U₃Co_4+xAl_12−x. Calculations are based on a series of interatomic pair potentials related to the actinides and transition metals, which are obtained by a strict lattice inversion method. The lattice constants of Th₃Co_4+xAl_12−x and U₃Co_4+xAl_12−x are calculated for different values of x. The site preference of Co atoms at Al sites is also evaluated and the order is given as 6h, 4f, 2b and 12k for Th₃Co_4+xAl_12−x, and 6h, 4f, 12k and 2b for U₃Co_4+xAl_12−x. In addition, some simple mechanical properties such as the elastic constants and bulk modulus are investigated for the actinide compounds with complex structures.     

Synthesis of new molybdenum-tungsten, vanadium-tungsten and vanadium-molybdenum-tungsten oxynitrides from freeze-dried precursors

Interstitial molybdenum-tungsten, vanadium-tungsten and vanadium-molybdenum-tungsten oxynitrides in the solid solution series Mo_1−zW_z(O_xN_y) and V_1−zW_z(O_xN_y) (z=0, 0.2, 0.4, 0.5, 0.6, 0.8, 1), and V_1−u−zMo_uW_z(O_xN_y) (u, z=0.2, 0.33, 0.4, 0.6; u+z<1), have been obtained by ammonolysis of precursors resulting from the freeze-drying of aqueous solutions of the metal salts (NH₄VO₃, (NH₄)₆Mo₇O₂₄·4H₂O and (NH₄)₆W₁₂O₃₉·18H₂O). A study of the influence of the preparative variables on the outcomes of this procedure is presented. Compounds in the Mo_1−zW_z(O_xN_y) series are prepared as single phases by ammonolysis of the respective freeze-dried precursors (during 2 h) at different temperatures between 973 and 1023 K, optimised for each composition, followed by slow cooling of the samples (except for the Mo-only containing phase, in which fast cooling has been used). Compounds in the V_1−zW_z(O_xN_y) and V_1−u−zMo_uW_z(O_xN_y) series are prepared as single phases by ammonolysis (during 2 h) of crystalline precursors (as resulting from thermal treatment in air at 873 K, during 12 h, of the freeze-dried precursors) at 1073 K, followed by slow cooling of the samples. All the compounds in these series have the rock-salt crystal structure, in which the metal atoms are in an fcc arrangement, with non-metal atoms occupying octahedral interstitial positions. The materials have been characterized by X-ray powder diffraction, elemental analysis, scanning electron microscopy and magnetic measurements.     

The electronic structure of FeO 4 2− , RuO4, RuO 4 − , RuO 4 2− and OsO4 by the HFS-DVM method

The electronic structures of FeO ₄ ^2? , RuO₄, RuO ₄ ^? , RuO ₄ ^2? and OsO₄ have been investigated using the Hartree-Fock-Slater Discrete Variational Method. The calculated ordering of the valence orbitals is 2t ₂, 1e, 2a ₁, 3t ₂ andt ₁ with thet ₁ orbital as the highest occupied. The first five charge transfer bands are assigned as:t ₁→2e(v ₁), 3t ₂→2e(v ₂),t ₁→4t ₂(v ₃), 3t ₂→4t ₂(v ₄) and 2a ₁→4t ₂(v ₅). It is suggested that ad-d transition should be observed at 1.5 eV in RuO ₄ ^? and RuO ₄ ^2? .     

Synthesis and crystal structure of three silver indium double phosphates

Three new silver indium double phosphates Ag₃In(PO₄)₂ (I), β-(II) and α-Ag₃In₂(PO₄)₃ (III) were synthesized by solid state method (I and II—700 °C, III—900 °C). Compounds I and II crystallize into a monoclinic system (I—sp. gr. C2/m, Z=2, a=8.7037(1)Å, b=5.4884(1)Å, c=7.3404(1)Å, β=93.897(1)°; II—sp. gr. C2/c, Z=4, a=12.6305(1)Å, b=12.8549(1)Å, c=6.5989(1)Å, β=113.842(1)°), and compound III crystallize into a hexagonal system (sp. gr. R-3c, Z=6, a=8.9943(1)Å, c=22.7134(1)Å). Their crystal structures were determined by the Rietveld analysis (I—R_p=6.47, R_wp=8.54; II—R_p=5.67, R_wp=6.40; III—R_p=7.30, R_wp=9.91). Structure of Ag₃In(PO₄)₂ is related to the sodium chromate structure type and is isotypic to α-Na₃In(PO₄)₂. The polymorphous modifications of β- and α-Ag₃In₂(PO₄)₃ are isostructural to sodium analogs (β- and α-Na₃In₂(PO₄)₃) and are related to alluaudite (II) and NASICON (III) structure types. Compounds I and II are not stable at temperature above 850 °C. Ag₃In(PO₄)₂ is decomposed providing silver orthophosphate Ag₃PO₄ and α-Ag₃In₂(PO₄)₂. β-Ag₃In₂(PO₄)₃ is transformed to α-Ag₃In₂(PO₄)_3.     

Synthesis and characterization of n=5, 6 members of the La4Srn−4TinO3n+2 series with layered structure based upon perovskite

Layered compounds have been synthesized and structurally characterized for the n=5 and 6 members of the perovskite-related family La₄Sr_n−4Ti_nO_3n+2 by combining X-ray diffraction and transmission electron microscopy. Their structure can be regarded as comprising [(La,Sr)₅Ti₅O₁₇] and [(La,Sr)₆Ti₆O₂₀] perovskite blocks joined by crystallographic shears along the a-axis, with consecutive blocks shifted by 1/2 [100]_p. The n=5 member is similar to the previously reported n=5 member of other A_nB_nO_3n+2-related series. The n=6 member, which has only been briefly reported in other systems previously, is also a well-behaved member of this A_nB_nO_3n+2 series.     

Phase formation features in the systems M2MoO4-Fe2(MoO4)3 (M=Rb, Cs) and crystal structures of new double polymolybdates M3FeMo4O15

The systems M₂MoO₄-Fe₂(MoO₄)₃ (M=Rb, Cs) were shown to be non-quasibinary joins of the systems M₂O-Fe₂O₃-MoO₃. New compounds M₃FeMo₄O₁₅ were revealed along with the known MFe(MoO₄)₂ and M₅Fe(MoO₄)₄. The unit cell parameters of the new compounds are a=11.6192(2), b=13.6801(3), c=9.7773(2) Å, β=92.964(1)°, space group P2₁/c, Z=4 (M=Rb) and a=11.5500(9), b=9.9929(7), c=14.513(1) Å, β=90.676(2)°, space group P2₁/n, Z=4 (M=Cs). In the structures of M₃FeMo₄O₁₅ (M=Rb, Cs), a half of the FeO₆ octahedra share two opposite edges with two MoO₆ octahedra linked to other FeO₆ octahedra through the bridged MoO₄ tetrahedra by means of the common oxygen vertices to form the chains along the a axis. The difference between the structures is caused by diverse mutual arrangements of the adjacent polyhedral chains.     

Cerium effect on the phase structure, phase stability and redox properties of Ce-doped strontium ferrates

Nanostructured perovskite-type Sr_1−aCe_aFeO_3−x, (0?a<0.15) powders have been prepared by citrate-nitrate smoldering auto-combustion. Their phase structure and stability, surface and morphological properties, reduction behavior and interaction with oxygen have been investigated by X-ray Powder Diffraction combined with Rietveld Analysis, ⁵⁷Fe Mössbauer and X-ray Photoelectron Spectroscopies, N₂-adsorption method, Temperature Programmed Reduction and Oxidation experiments. Our results reveal that citrate-nitrate auto-combustion method is effective in obtaining single phase Sr_1−aCe_aFeO_3−x. The Sr_1−aCe_aFeO_3−x structure is cubic only for a?0.06, while for a<0.06 remains tetragonal. Moreover, for a?0.06 after semi-reductive treatment under inert gas, an expanded cubic phase is obtained instead of the brownmillerite-type structure, which is known to have ordered vacancies. Stabilization of octahedral Fe³⁺ by cerium doping appears to be the main factor in determining the structural properties of Sr_1−aCe_aFeO_3−x. The highest oxygen consumption for Ce-doped SrFeO₃ occurs for a=0.06. Preliminary impedance measurements show that Sr_0.94Ce_0.06FeO_3−x has the lowest area-specific resistance.     

Structures and syntheses of layered and framework amine-bearing uranyl phosphate and uranyl arsenates

Two hydrated uranyl arsenates and a uranyl phosphate were synthesized by hydrothermal methods in the presence of amine structure-directing agents and their structures determined: (N₂C₆H₁₄)[(UO₂)(AsO₄)]₂(H₂O)₃, DabcoUAs, {NH(C₂H₅)₃}[(UO₂)₂(AsO₄)(AsO₃OH)], TriethUAs, and (N₂C₄H₁₂)(UO₂)[(UO₂)(PO₄)]₄(H₂O)₂, PiperUP. Intensity data were collected at room temperature using MoKα X-radiation and a CCD-based area detector. The crystal structures were refined by full-matrix least-squares techniques on the basis of F² to agreement indices (DabcoUAs, TriethUAs, PiperUP) wR₂=5.6%, 8.3%, 7.2% for all data, and R₁=2.9%, 3.3%, 4.0%, calculated for 1777, 5822, 9119 unique observed reflections (|F_o|?4σ_F), respectively. DabcoUAs is monoclinic, space group C2/m, Z=2, a=18.581(1), b=7.1897(4), c=7.1909(4) Å, β=102.886(1)°, V=936.43(9) Å³, D_calc=3.50 g/cm³. TriethUAs is monoclinic, space group P2₁/n, Z=4, a=9.6359(4), b=18.4678(7), c=10.0708(4) Å, β=92.282(1)°, V=1790.7(1) Å³, D_calc=3.41 g/cm³. PiperUP is monoclinic, space group Pn, Z=2, a=9.3278(4), b=15.5529(7), c=9.6474(5) Å, β=93.266(1)°, V=1397.3(1) Å³, D_calc=4.41 g/cm³. The structure of DabcoUAs contains the autunite-type sheet formed by the sharing of vertices between uranyl square bipyramids and arsenate tetrahedra. The triethylenediammonium cations are located in the interlayer along with two H₂O groups and are disordered. Both TriethUAs and PiperUP contain sheets formed of uranyl pentagonal bipyramids and tetrahedra (arsenate and phosphate, respectively) with the uranophane sheet-anion topology. In TriethUAs, triethlyammonium cations are located in the interlayer. In PiperUP, the sheets are connected by a uranyl pentagonal bipyramid that shares corners with phosphate tetrahedra of adjacent sheets, resulting in a framework with piperazinium cations and H₂O groups in the cavities of the structure.