Boron dipyrromethene fluorophore based fluorescence sensor for the selective imaging of Zn(II) in living cells

A simple PET fluorescence sensor (BDA) for Zn2+ that utilizes 1,3,5,7-tetramethyl-boron dipyrromethene as a reporting group and di(2-picolyl)amine as a chelator for Zn2+ has been synthesized and characterized. BDA has an excitation (491 nm) and emission wavelength (509 nm) in the visible range. The fluorescence quantum yields of the zinc-free and zinc-bound states of BDA are 0.077 and 0.857, respectively. With a low pKa of 2.1 +/- 0.1, BDA has the advantage of less sensitivity to pH than fluorescein-based Zn2+ sensors, and the fluorescence emission of zinc-binding is pH-independent in the range of pH 3-10. Under physiological conditions, metal ions such as Na+, K+, Ca2+, Mg2+, Mn2+ and Fe2+ have little interference. The apparent dissociation constant (Kd) is 1.0 +/- 0.1 nM. Using fluorescence microscopy, the sensor is shown to be capable of imaging intracellular Zn2+ changes.     

Fluorescent chemosensor based on Schiff base for selective detection of zinc(II) in aqueous solution

A chemosensor 1, based on the Schiff base, is easily prepared by reacting tryptophan and 2-hydroxy-1-naphthaldehyde in methanol. The optical properties of 1 are investigated in buffered aqueous solution, which displays specific recognition to Zn²⁺, and especially avoids the interference of Cd²⁺ when 1 is tested against a range of physiological and environmentally relevant metal ions. Such a novel fluorescent probe can also be used to detect Zn²⁺ in live cells.     

A colorimetric probe for the selective naked-eye detection of Pb(II) ions in aqueous media

A new colorimetric molecular probe based on a 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) dye selectively binds Pb(II) ions in aqueous solutions, allowing for highly sensitive naked-eye detection.     

A highly selective fluorescent probe for nanomolar detection of ferric ions in the living cells and aqueous media

A dipodal fluorescent probe 3, with imine and hydroxyl moieties as binding sites, has been synthesized and characterized with spectroscopic methods, single-crystal X-ray techniques, and DFT. The synthesized probe 3 (φ = 0.0028) showed highly sensitive and highly specific fluorescent ‘turn-on’ effect (λ_em = 453 nm) for the 1:1 binding with Fe³⁺ ions to form probe 3.Fe³⁺ complex (φ = 0.203) in semi-aqueous medium (acetonitrile:water (50:50; v/v)) and live cells. The 1:1 binding stoichiometry of probe 3 and Fe³⁺ ions was proposed by DFT calculations and confirmed by the NMR spectroscopy, crystal structures of probe 3 and 3.Fe³⁺ complex, and mass spectrum of probe 3.Fe³⁺ complex. The stability of probe 3.Fe³⁺ complex in a wide pH range (pH 2–12) and reversibility for binding with Fe³⁺ ions in the presence of EDTA indicates that it can be an effective chemosensor for the detection of Fe³⁺ ions in various samples, including living cells. Importantly, with the LOD of 21.5 nM for the detection of Fe³⁺ ions, probe 3 did not show any interference from potentially competing ions even at a 1:3 ratio, indicates its biocompatibility. The nanomolar limit of detection (21.5 nM), cell permeability, and low cytotoxicity allows the probe 3 to be an excellent tool for the live-cell imaging and detection of ferric ions in live cells.     

A highly selective OFF-ON fluorescent sensor for zinc in aqueous solution and living cells

A novel compound, 2-p-tolyl-1H-imidazo[4,5-f][1,10]phenanthrolinium hydrogenselenite (HMPIP·HSeO(3), C1), shows a peculiar OFF-ON fluorescent response to Zn(2+) in aqueous solution and living cells.     

A new turn-on fluorescence probe for Zn in aqueous solution and imaging application in living cells

We designed and synthesized a new pyrazoline-based turn-on fluorescence probe for Zn²⁺ by the reaction of chalcone and thiosemicarbazide. The structure of the probe was characterized by IR, NMR and HRMS spectroscopy. The probe (L) exhibits high selectivity and sensitivity for detecting Zn²⁺ in buffered EtOH/HEPES solution (EtOH/HEPES = 1/1, pH 7.2) with 80-fold fluorescence enhancement, which is superior to previous reports. Job’s plot analysis revealed 1:1 stoichiometry between probe L and Zn²⁺ ions. The association constant estimated by the Benesi–Hildebrand method and the detection limit were 3.92 × 10³ M⁻¹ and 5.2 × 10⁻⁷ M, respectively. A proposed binding mode was confirmed by ¹H NMR titration experiments and density functional theory (DFT) calculations. The probe is cell-permeable and stable at the physiological pH range in biological systems. Because of its fast response to Zn²⁺, the probe can monitor Zn²⁺ in living cells. Moreover, the selective binding of L and Zn²⁺ was reversible with the addition of EDTA in buffered EtOH/HEPES solution and Zn²⁺ could be imaged in SH-SY5Y neuron cells.     

A highly selective fluorescent probe for the detection of palladium(II) ion in cells and aqueous media

We report on a fluorescent probe for the optical (and even bare eye) detection of palladium(II) ion which causes the probe to undergo a strong increase in absorbance and fluorescence. The probe is easily synthesized from rhodamine B hydrazide and 9-anthraldehyde and displays high selectivity over other metal ions. Fluorescence intensity and absorbance are linearly proportional to the concentration of Pd(II) in the 0–7 μM and 0–1 μM concentration range, respectively, with detection limits of 0.21 μM and 0.03 μM. The probe can detect Pd(II) with virtually no interferences by other metal ions and anions. It was applied to intracellular imaging of Pd(II) in living cells and to its determination in a palladium-containing catalyst and in spiked water samples.

A valence bond model for aqueous Cu(II) and Zn(II) ions in the AMOEBA polarizable force field

A general molecular mechanics (MM) model for treating aqueous Cu²⁺ and Zn²⁺ ions was developed based on valence bond (VB) theory and incorporated into the atomic multipole optimized energetics for biomolecular applications (AMOEBA) polarizable force field. Parameters were obtained by fitting MM energies to that computed by ab initio methods for gas‐phase tetra‐ and hexa‐aqua metal complexes. Molecular dynamics (MD) simulations using the proposed AMOEBA‐VB model were performed for each transition metal ion in aqueous solution, and solvent coordination was evaluated. Results show that the AMOEBA‐VB model generates the correct square‐planar geometry for gas‐phase tetra‐aqua Cu²⁺ complex and improves the accuracy of MM model energetics for a number of ligation geometries when compared to quantum mechanical (QM) computations. On the other hand, both AMOEBA and AMOEBA‐VB generate results for Zn²⁺–water complexes in good agreement with QM calculations. Analyses of the MD trajectories revealed a six‐coordination first solvation shell for both Cu²⁺ and Zn²⁺ ions in aqueous solution, with ligation geometries falling in the range reported by previous studies. © 2012 Wiley Periodicals, Inc.     

A highly selective fluorescence chemosensor for Pb(II) in neutral buffer aqueous solution

A 3,4-dimethylthieno[2,3-b]thiophene-based fluorogenic probe bearing benzo[d]-thiazole-2-thio unit (sodium 3,4-bis ((benzo[d]thiazol-2-ylthio)methyl) thieno [2, 3-b]thio-phene-2, 5-dicarboxylate) was developed as a novel fluorescent chemosensor with high selectivity towards Pb(II) over other cations tested. The new probe exhibited good water solubility and only sensed Pb(II) among metal ions examined in neutral 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid buffer solution. The selectivity and sensitivity of fluorogenic probe to Pb(II) were discussed on the basis of experimental results.     

A new luminescent anionic metal–organic framework based on heterometallic zinc(II)–barium(II) for selective detection of Fe3+ and Cu2+ ions in aqueous solution

Over the past two decades, the development of novel inorganic–organic hybrid porous crystalline materials or metal–organic frameworks (MOFs) using crystal engineering has provoked significant interest due to their potential applications as functional materials. In this context, luminescent MOFs as fluorescence sensors have recently received significant attention for the sensing of ionic species and small molecules. In this work, a new luminescent heterometallic zinc(II)–barium(II)‐based anionic metal–organic framework, namely poly[imidazolium [triaqua(μ₆‐benzene‐1,3,5‐tricarboxylato)bariumtrizinc] tetrahydrate], {(C₃H₄N₂)[BaZn₃(C₉H₃O₆)₃(H₂O)₃]·4H₂O}_n ( 1 ), was synthesized under hydrothermal conditions and characterized. Compound 1 presents a three‐dimensional framework with an unprecedented (3,5)‐connected topology of the point symbol (3.9²).(3³.4².5.9³.10), and exhibits `turn‐off' luminescence responses for the Cu²⁺ and Fe³⁺ ions in aqueous solution based on significantly different quenching mechanisms.     

On the structure of Zn(II) and Cu(II) cyanin complexes in aqueous solution

B3LYP/6-31++G(d,p) optimizations on models for the metal cyanin, Cy, complexes [MCy(H₂O) _n ]⁺, (M = Zn(II), Cu(II); n = 2, 3, 4) in aqueous solution indicate that 4 is the most favoured coordination number in both cases. SP -4 and T -4 geometries are nearly isoenergetic for the former, while SP -4 is the only one obtained for the latter. Anionic cyanin displays higher affinity for Cu(II) than for Zn(II) or Mg(II). The electron density reorganization of cyanin model accompanying the complexation process was analyzed by means of the quantum theory of atoms in molecules. This analysis reveals that: (1) the O4′–M bond is stronger than O3′–M; (2) anionic cyanin displays a dual character between 4′-keto-quinoidal and 3′,4′-dienolate resonance forms; (3) Cu(II) takes more electron density than Zn(II) from Cy^? and water ligands; (4) when the coordination number increases, each ligand (Cy^? or water) transfers less electron density; (5) complex formation modifies the electron density in all the atoms of the ligands, but the largest modifications are displayed within the AC bicycle of Cy^?; and (6) a third part of density lost by the Cy^? ligand is removed from hydrogens.     

A stoichiometric imprinted chelating resin for selective recognition of copper(II) ions in aqueous media

This work reports the preparation of a new copper(II) ion-imprinted polymer (IIP) material, using 5,6;14,15-dibenzo-1,4-dioxa-8,12-diazacyclopentadecane-5,14-diene (DBDA15C4) and 2-vinylpyridine (VP) as a non-vinylated chelating agent and a functional vinyl monomer, respectively. The Cu²⁺ ion can form stable complexes with DBDA15C4 and VP. The stoichiometries of Cu²⁺-DBDA15C4 and ternary Cu²⁺-DBDA15C4-VP complexes were elucidated using conductometric and spectrophotometric methods, and found to be Cu²⁺(DBDA15C4), Cu²⁺(DBDA15C4)₂ and Cu²⁺(DBDA15C4)(VP)₂. The results obtained from solution studies were also supported by ab initio theoretical calculations. The resulting ternary complex Cu²⁺(DBDA15C4)(VP)₂ was copolymerized with ethyleneglycoldimethacrylate, as a cross-linking monomer, via bulk polymerization method. The imprinted copper ion was removed from the polymeric matrix by 0.1 M HNO₃. The Cu²⁺-imprinted polymer particles were characterized by IR spectroscopy and elemental analysis. Optimum pH range for rebinding of Cu²⁺ on the IIP and equilibrium binding time were 7.0-7.5 and 45 min, respectively. Sorbent capacity and enrichment factor for Cu²⁺ were obtained as 75.3 ± 1.9 μmol g⁻¹ and 100, respectively. In selectivity study, it was found that imprinting results in increased affinity of the material toward Cu²⁺ ion over other competitor metal ions with the same charge and close ionic radius. The prepared IIPs were repeatedly used and regenerated for five times without a significant decrease in polymer binding affinities.     

Ratiometric fluorescent sensor based on inhibition of resonance for detection of cadmium in aqueous solution and living cells

Although cadmium has been recognized as a highly toxic heavy metal and poses many detrimental effects on human health, the Cd(2+)-uptake and nosogenesis mechanisms are still insufficiently understood, mainly because of the lack of facile analytical methods for monitoring changes in the environmental and intracellular Cd(2+) concentrations with high spatial and temporal reliability. To this end, we present the design, synthesis, and photophysical properties of a cadmium sensor, DQCd1 based on the fluorophore 4-isobutoxy-6-(dimethylamino)-8-methoxyquinaldine (model compound 1). Preliminary investigations indicate that 1 could be protonated under neutral media and yield a resonance process over the quinoline fluorophore. Upon excitation at 405 nm, 1 shows a strong fluorescence emission at 554 nm with a quantum yield of 0.17. Similarly, DQCd1 bears properties comparable to its precursor. It exhibits fluorescence emission at 558 nm (Φ(f) = 0.15) originating from the monocationic species under physiological conditions. Coordination with Cd(2+) causes quenching of the emission at 558 nm and simultaneously yields a significant hypsochromic shift of the emission maximum to 495 nm (Φ(f) = 0.11) due to inhibition of the resonance process. Thus, a single-excitation, dual-emission ratiometric measurement with a large blue shift in emission (Δλ = 63 nm) and remarkable changes in the ratio (F(495 nm)/F(558 nm)) of the emission intensity (R/R(0) up to 15-fold) is established. Moreover, the sensor DQCd1 exhibits very high sensitivity for Cd(2+) (K(d) = 41 pM) and excellent selectivity response for Cd(2+) over other heavy- and transition-metal ions and Na(+), K(+), Mg(2+), and Ca(2+) at the millimolar level. Therefore, DQCd1 can act as a ratiometric fluorescent sensor for Cd(2+) through inhibition of the resonance process. Confocal microscopy and cytotoxicity experiments indicate that DQCd1 is cell-permeable and noncytotoxic under our experimental conditions. It can indeed visualize the changes of intracellular Cd(2+) in living cells using dual-emission ratiometry.     

Novel fluorescent sensor for detection of Cu(II) in aqueous solution

A novel fluorescent chemosensor based on aminonaphthol, which can selectively recognize copper(II) over other metal ions in aqueous solution within a broad pH span, was synthesized.     

A fast,highly selective and sensitive dansyl-based fluorescent sensor for copper (II) ions and its imaging application in living cells

Since the copper ions (Cu²⁺) play a fatal role in many foundational physiological processes, it is important to develop a simple, highly sensitive and selective sensor for Cu²⁺ detection in living systems. Herein, an intramolecular charge transfer (ICT) and dansyl-based fluorescent chemosensor 1 was designed, synthesized and characterized for the sensitive and selective quantification of Cu²⁺. It exhibited remarkable fluorescence quenching upon addition of Cu²⁺ over other selected metal ions, attributed to the complex formation between 1 and Cu²⁺ with the association constant 6.7 × 10⁵ M^?1. The sensor 1 showed a fast and linear response towards Cu²⁺ in the concentration range from 0 to 12.5 × 10^?6 mol L^?1 with the detection limit of 2.5 × 10^?7 mol L^?1. This detection could be carried out in a wide pH range of 5.0–14. Furthermore, sensor 1 can be used for detecting Cu²⁺ in living cells.     

A tetraphenylethene based polarity dependent turn-on fluorescence strategy for selective and sensitive detection of Hg in aqueous medium and in living cells

A turn-on fluorescent chemosensor strategy based on the change in the polarity of aggregation induced emission active tetraphenylethene is presented for the detection of Hg²⁺ in aqueous medium and in living cells. The sensing mechanism involves the formation of nonpolar fluorescent aggregates of tetraphenylethene molecules by elimination of polar moieties of TPE with Hg²⁺ interaction.     

A selective, sensitive probe for mercury(II) ions based on oxazine-thione

A selective, sensitive probe for Hg(II) ions, 7-(diethylamino)-3-methyl-2H-benzo[b][1,4] oxazine-2-thione (1), is developed. Compound 1 behaves as a ratiometric probe, exhibiting a large blue shift of 100 nm in its absorption spectra upon exposure to Hg(II) ions. The dramatic color change of the solution made ‘naked-eye’ detection of Hg(II) ions possible. Emission spectra of 1 displayed a selective enhancement in intensity in the presence of Hg(II) ions. ESI⁺-MS analysis indicated that Hg²⁺-induced desulfurization caused the large absorption response.     

Fluorescence turn-on chemodosimeter for rapid detection of mercury (II) ions in aqueous solution and blood from mice with toxicosis

The heavy metal mercury (Hg) is a threat to the health of people and wildlife in many environments. Among various chemical forms, Hg²⁺ salts are usually more toxic than their counterparts because of their greater solubility in water; thus, they are more readily absorbed from the gastrointestinal tract into circulation. Therefore, new chemical receptors for detecting Hg²⁺ ions in circulation are needed. In this study, we developed a rhodamine-based turn-on fluorescence probe to monitor Hg²⁺ in aqueous solution and in blood of mice with toxicosis. The chemodosimeter responds to Hg²⁺ ions stoichiometrically, rapidly, and irreversibly at room temperature as a result of a chemical reaction that produces strongly fluorescent oxadiazole. The new fluorescent probe shows good fluorescence response, with high sensitivity and selectivity, toward Hg²⁺ ions in aqueous solution and in blood from mice with toxicosis and facilitates the naked-eye detection of Hg²⁺ ions.     

A microcalorimetric study of the association of hexacyanoferrate(II) ions with calcium and magnesium ions in aqueous solution

Using flow microcalorimetry, the ion association reaction M²⁺(aq)+Fe(CN) ₆ ^4– (aq)=MFe(CN) ₆ ^2– (aq) (M=Ca, Mg) has been studied at 25°C over the ionic strength range 0.02 to 0.08 mol-dm^–3. Analyses of the data to obtain H^o, the enthalpy change at infinite dilution, are described. The value obtained for H^o is sensitive to the kind of functions used to correct for non-ideal behavior.     

Rosamine-based fluorescent chemosensor for selective detection of silver(I) in an aqueous solution

The synthesis and photophysical properties of a rosamine-based fluorescent chemosensor, RosAg, for detecting Ag ion in an aqueous solution are described. This fluorescent sensor has a negligible quantum yield (<0.005) in the absence of Ag(+), whereas a significant increase in fluorescence is observed upon complexation with Ag(+) under physiological conditions. The crystal structure of the silver complex with the chelator moiety of RosAg reveals a trigonal-planar coordination geometry in which three S atoms occupy the metal center. Although a strong coordinative interaction of Ag-N is not observed in the crystal structure, the (1)H NMR experiments suggest that aniline nitrogen is likely to be associated with the Ag(+) center in the solution state. This may inhibit the photoinduced electron transfer process and result in the enhancement of fluorescence.