A practical and efficient green synthesis of β-aminophosphoryl compounds via the aza-Michael reaction in water

Biphasic systems room temperature imidazolium ionic liquid (RTIL)/water or water as a solvent significantly accelerate the addition of amines to vinylphosphoryl compounds hence opening green and effective synthesis of β-aminophosphoryl compounds in excellent yields over short reaction times. The application of water, being the cheapest and most non-toxic solvent, without any catalyst or co-solvent, is more advantageous as it provides a simple isolation procedure for products having high purity (> 95% according to the NMR data) via simple freeze-drying and does not require extraction with organic solvents. The solubility of the starting phosphorus substrate in water does not play crucial role in the reaction as it was demonstrated using water insoluble diphenylvinylphosphine oxide. In contrast to typical procedures, using a reactant ratio (vinylphosphoryl compound: amine) of 2:1 readily resulted in double phosphorylation of primary amines, including polyamines, in water.     

Kinetics of α hydrogen abstractions from thiols, sulfides and thiocarbonyl compounds

Hydrogen abstraction reactions involving organosulfur compounds play an important role in many industrial, biological and atmospheric processes. Despite their chemical relevance, little is known about their kinetics. In this work a group additivity model is developed that allows predicting the Arrhenius parameters for abstraction reactions of α hydrogen atoms from thiols, alkyl sulfides, alkyl disulfides and thiocarbonyl compounds by carbon-centered radicals at temperatures ranging from 300 to 1500 K. Rate coefficients for 102 hydrogen abstractions were obtained using conventional transition state theory within the high-pressure limit. Electronic barriers were calculated using the CBS-QB3 method and the rate coefficients were corrected for tunneling and hindered rotation about the transitional bond. Group additivity values for 46 groups are determined. To account for resonance and hyperconjugative stabilization in the transition state, 8 resonance corrections were fitted to a set of 32 reactions. The developed group additivity scheme was validated using a test set containing an additional 30 reactions. The group additivity scheme succeeds in reproducing the rate coefficients on average within a factor of 2.4 at 300 K and 1.4 at 1000 K. Mean absolute deviations of the Arrhenius parameters amount to, respectively, 2.5 kJ mol(-1) for E(a) and 0.13 for log A, both at 300 and 1000 K. This work hence illustrates that the recently developed group additivity methods for Arrhenius parameters extrapolate successfully to hetero-element containing compounds.     

Novel and efficient supramolecular synthesis of pyrroles in the presence of β-cyclodextrin in water

A simple and efficient synthesis of highly substituted pyrroles was achieved in water medium via multi-component strategy, using amine,DMAD/DEAD as well as phenacyl bromide catalyzed by β-CD.Utilizing this protocol various pyrrole derivatives were synthesized in good to excellent yields.     

Efficient synthesis of β-chlorovinylketones from acetylene in chloroaluminate ionic liquids

A method for the Friedel-Crafts-type insertion reaction of acetylene with acid chlorides in chloroaluminate ionic liquids is presented. The use of ionic liquids not only serves to avoid the use of carbon tetrachloride or 1,2-dichloroethane but also suppresses side reactions, notably the polymerization of acetylene, which occurs in these chlorinated solvents. Consequently, the products can be isolated using a simpler purification procedure, giving a range of aromatic and aliphatic β-chlorovinyl ketones in high yield and purity.     

Decisive role of water in efficient noncatalyzed synthesis of polyfunctional 1H-1,2,3-triazoles proceeding from γ-hydroxypropynals

A highly efficient method was developed for the synthesis of new polyfunctional 1H-1,2,3-triazoles by the reaction of γ-hydroxypropynals with trimethylsilyl azide in water at room temperature without catalyst. The addition of trimethylsilyl azide to γ-hydroxypropynals occurs regioselectively: Previously unknown hydroxyalkyl-1H-1,2,3-triazolecarbaldehydes have been isolated in 69-96% yields with the prevalence of 1,5-isomers and the content of minor 1,4-isomers equal 9-21%. In the reaction of γ-hydroxypropynals with sodium azide in DMSO the formation of 4-hydroxyalkyl-1H-1,2,3-triazole-5-carbaldehydes is accompanied by the dimerization of initial aldehydes into the corresponding 1,3-dioxolanes.     

Highly efficient preparation of 5-hydroxymethylfurfural from sucrose using ionic liquids and heteropolyacid catalysts in dimethyl sulfoxide–water mixed solvent

Several types of ILs and solid acids were used as catalysts in one-pot conversion of sucrose to 5-hydroxymethylfurfural (abbreviated as 5-HMF) in a dimethyl sulfoxide (DMSO)/water mixed solvent under hydrothermal conditions. A remarkable 5-HMF yield of 91.8% was achieved catalyzed by the cesium salt of dodecatungstophosphoric acid (Cs_2.3H_0.7PW₁₂O₄₀) within 3 h at 180 ℃. The ionic liquid N-methylimidazolium hydrogen sulfate ([Hmim][HSO₄]) gave the 5-HMF in 82.0% yield from sucrose. To the best of our knowledge, it was almost the highest yield of HMF from sucrose by now. Various reaction parameters including reaction temperature and time and catalyst dosage were optimized. A possible mechanism for this catalytic process was proposed. Furthermore, fructose and glucose were also investigated, good yields of 5-HMF was obtained respectively. This increases the possibility of large-scale production of 5-HMF from carbohydrates.     

[bmim]OH-promoted one-pot,three-component synthesis of β-nitro sulfides in water

A task-specific ionic liquid, [bmim]OH, has been found to be a highly efficient catalyst for one-pot, three-component coupling of aryl aldehydes, nitromethane, and thiols for the synthesis of β-nitro sulfides in water. The main advantages of the present protocol include the use of inexpensive simple substrates and an ionic liquid as a basic catalyst.     

Highly efficient synthesis of α-amino amidines from ynamides by the Cu-catalyzed three-component coupling reactions

Using ynamides as one of the reacting components, the Cu-catalyzed three-component reaction of sulfonyl or phosphoryl azides and amines affords α-amino amidines in high yields under mild conditions. Synthetic utility of the produced compounds was demonstrated in the diastereoselective alkylation of α-amino amidines bearing a chiral oxazolidinone moiety. It was also shown that α-amino imidates could be readily prepared by employing alcohols instead of amines.     

Convenient and rapid synthesis of α-aminonitriles starting directly from nitro compounds in water

A distinct approach for the synthesis of α-aminonitriles has been discovered by three-component reaction of nitroarenes, aldehydes, and TMSCN using indium in dilute aqueous HCl at room temperature. The products were formed in high yields (86-96%) within a short period of time (5-20 min). This one-pot conversion consists of the following steps: (i) reduction of nitro compounds to amines, (ii) formation of imines from amines and aldehydes and (iii) addition of cyanide anion to the imines.     

Practical and efficient synthesis of chiral 2,4-disubstituted oxazolines from β-phosphonoamides

Herein we report a practical and efficient method for the synthesis of optically active 2,4-disubstituted oxazolines (S)-1a–h in good to excellent yields. The target compounds were prepared in good yield through the Horner–Wadsworth–Emmons reaction of β-phosphonoamide 3 bearing l-phenylalaninol with commercially available aryl aldehydes followed by the cyclodehydration of the corresponding N-(cinnamoyl)-(S)-phenylalaninol derivatives (S)-2a–h. Additionally, the cyclodehydration of β-phosphonoamide (S)-3 followed by the Horner–Wadsworth–Emmons reaction of β-phosphono-oxazoline (S)-4 with aryl aldehydes also gave the 2,4-disubstituted oxazolines (S)-1a–h.     

“The hidden power and competitive advantage of applying green chemistry metrics”

Green chemistry (GC) metrics provide insight into the relative waste, time and cost implications of pharmaceutical chemical processes and serve to guide scientists in the strategic application of resources to develop more efficient and sustainable processes. Examples of the application of GC metrics in evaluating pharmaceutical process efficiency and the subsequent development toward improvement exist in abundance from journals such as Organic Process Research and Development, Green Chemistry, or as encompassed by the winning examples from the ACS GCI Pharmaceutical Roundtable's [1] Peter J. Dunn award [2] or the US EPA's Green Chemistry Challenge award [3]. By their nature, GC metrics are continuously evolving but justify the necessary, unceasing investment in understanding and application as they offer unique, opportunistic insight serving to guide scientific resource deployment when developing greener pharmaceutical, chemical processes.     

A new efficient synthesis of pyrazoles from hydrazonoyl halides and β-oxophosphonates

A new practical and efficient synthesis of 1,3,5-trisubstituted pyrazoles has been developed by reacting of hydrazonoyl halides with β-oxophosphonates under mild conditions in good yields with excellent regioselectivity. This process employs an addition–elimination sequence. Wide scope, functional group compatibility has been established.     

Highly efficient synthesis of dicoumarols and xanthene derivatives in presence of Brønsted–Lewis acidic ionic liquids catalyst

A series of metal chloride-based acidic ionic liquids have been prepared and used as an efficient catalyst in one-pot multicomponent synthesis of biscoumarins and substituted xanthenes derivatives under solvent-free conditions. Among the acidic ionic liquids, N-methylpyrrolidonium zinc chloride (Hnmp/ZnCl₃)-based Brønsted–Lewis acidic ionic liquids were found to be an effective and recyclable catalyst for a one-pot synthesis of biscoumarins through the domino Knoevenagel–Michael reaction of a variety of aldehydes with 4-hydroxycoumarin in short reaction times. The reactions which occur under relatively mild conditions afforded the biscoumarin derivatives employing a very low loading of catalyst in satisfactory isolated yields and high purity after simple work-up. The Brønsted–Lewis acidic ionic liquid catalyst was reused four times without any variation in yield.     

Highly efficient and green synthesis of spiro[indoline-3,9′-xanthene]trione and spiro[chromene-4,3′-indoline]-3-carbonitrile derivatives in water catalyzed by graphene oxide-supported dicationic ionic liquid

Research on Chemical Intermediates - In this article, a mild and highly efficacious synthetic route has been developed for the synthesis of spiro[indoline-3,9′-xanthene]trione and...     

“On water” cascade synthesis of benzopyranopyrazoles and their macrocycles

Reported herein is an intramolecular 1,3-dipolar cycloaddition strategy for rapid entry into benzopyranopyrazoles (BPP) on water medium as “open flask chemistry” approach. The in situ generation of diazo functionality in two-step sequence from the appropriate alkylated salicylaldehydes undergoes smooth [3?+?2]-cycloaddition with unactivated alkynes/alkenes furnishing benzopyranopyrazoles in good yield. This methodology was also extended for the synthesis of pyrazole incorporated macrocycles. This cascade protocol involving water medium provides an atom-economical and environment friendly approach.     

Transition-metal-free highly efficient synthesis of 2-pyridones from β-keto amides and ynals

A convenient and efficient annulation reaction was developed, affording 2-pyridones in good to excellent yields. A variety of substituted β-keto amides and ynals were well tolerated, and especially the transformation produced water as only by-product under transition-metal-free conditions. Furthermore, the conjugated enyneamides were achieved from β-cyano amides and ynals in high yields.     

Highly efficient one-pot synthesis of α-aminophosphonates using nanoporous AlSBA-15 catalyst in a three-component system

Research on Chemical Intermediates - Nanoporous AlSBA-15 catalysts with different nSi/nAl ratios (41, 129, and 210) were synthesized using a hydrothermal method. These catalysts were characterized...     

Highly efficient one-pot synthesis of fused pyrimidones from 2-heteroaryl amines and Morita–Baylis–Hillman carbonates via intermolecular cyclocondensation

A highly selective and efficient cyclocondensation reaction for construction of various 3-substituted-2H-pyrido[1,2-a]pyrimidin-2-ones and related fused pyrimidones from allylic carbonates and 2-heteroaryl amines has been developed. The transformation involves one-pot sequential aza-Michael addition, intramolecular acyl substitution, and [1,3]-H shift. The method is catalyst free, eco-friendly, scalable, and completes within a short reaction time, with no work-up, no column purification, and demonstrate a broad functional group tolerance.     

An efficient synthesis of uracil derivatives from 2-alkyl-Δ-oxazolines and nitriles

An efficient and convenient synthesis of new fluorinated and non-fluorinated uracils is described herein. The condensation of nitriles with enolates generated from 2-alkyl-Δ²-oxazolines (I) affords fluorinated β-enamino acid derivatives, which react with triphosgene to give an isomeric mixture of oxazolopyrimidinones. These can then be easily transformed into a single C-6 pyrimidindione derivative through reaction with a suitable nucleophile.