Structural, electrical, and optical properties of ZnInO alloy thin films

Indium zinc oxide (IZO) thin films with different percentages of In content (In/[In+Zn]) are synthesized on glass substrates by magnetron sputtering, and the structural, electrical and optical properties of IZO thin films deposited at different In₂O₃ target powers are investigated. IZO thin films grown at different In₂O₃ target sputtering powers show evident morphological variation and different grain sizes. As the In₂O₃ sputtering power rises, the grain size becomes larger and electrical mobility increases. The film grown with an In₂O₃ target power of 100 W displays the highest electrical mobility of 13.5 cm·V^-1·s^-1 and the lowest resistivity of 2.4 × 10^-3 Ω·cm. The average optical transmittance of the IZO thin film in the visible region reaches 80% and the band gap broadens with the increase of In₂O₃ target power, which is attributed to the increase in carrier concentration and is in accordance with Burstein-Moss shift theory.     

Investigation of the electrical properties and stability of HfInZnO thin-film transistors

In this study, amorphous HfInZnO (a-HIZO) thin films and related thin-film transistors (TFTs) were fabricated using the RF-sputtering method. The effects of the sputtering power (50–200 W) on the structural, surface, electrical, and optical properties of the a-HIZO films and the performance and NBIS stability of the a-HIZO TFTs were investigated. The films’ N_e increased and resistivity decreased as the sputtering power increased. The 100 W deposited a-HIZO film exhibited good optical and electrical properties compared with other sputtering powers. Optimization of the 100 W deposited a-HIZO TFT demonstrated good device performance, including a desirable μ_FE of 19.5 cm²/Vs, low SS of 0.32 V/decade, low V_th of 0.8 V, and high I_on/I_off of 10⁷, respectively. The 100 W deposited a-HIZO TFT with Al₂O₃ PVL also exhibited the best stability, with small V_th shifts of -2.2 V during NBIS testing. These high-performance a-HIZO thin films and TFTs with Al₂O₃ PVL have practical applications in thin-film electronics.     

Direct Monitoring of Thickness and Refractive Index of Optical Thin Film Deposited on Fiber End-face

We propose a system for depositing thin films on waveguides which enables low-temperature deposition and precise control of the refractive index and film thickness. It is composed of a conventional ion-beam sputtering (IBS) system and a new system for directly monitoring film characteristics during deposition. We controlled refractive indices over a wide range from 1.52 to 1.97 by moving the sputtering targets (SiO₂ and Si₃N₄) in the IBS system. The refractive index or film thickness was in-situ monitored by observing the optical power reflected from the end-face of a monitoring fiber set in the deposition chamber. Antireflection coating films were successfully deposited on a fiber end-face and a laser diode chip facet with low reflectivity from 0.05 to 0.07%. This deposition system is attractive for constructing highly functional optical devices for future photonic networks.     

Effect of RF power on the properties of transparent conducting zirconium-doped zinc oxide films prepared by RF magnetron sputtering

Transparent and conducting zirconium-doped zinc oxide films with high transparency and relatively low resistivity have been successfully prepared by radio frequency (RF) magnetron sputtering at room temperature. The RF power is varied from 75 to 150W. At first the crystallinity and conductivity of the film are improved and then both of them show deterioration with the increase of the RF power. The lowest resistivity achieved is 2.07×10^-3\Omegacm at an RF power of 100W with a Hall mobility of 16cm²V^-1s^-1 and a carrier concentration of 1.95×10²⁰cm^-3. The films obtained are polycrystalline with a hexagonal structure and a preferred orientation along the c-axis. All the films have a high transmittance of approximately 92% in the visible range. The optical band gap is about 3.33eV for the films deposited at different RF powers.     

Effect of sputtering anisotropic ejection on the optical properties and residual stress of Nb2O5 thin films

The effect of sputtering anisotropic ejection on the optical properties and internal stress of niobium pentoxide (Nb₂O₅) films prepared by ion-beam sputtering deposition (IBSD) was investigated experimentally. Thin films were deposited on unheated BK7 glass substrates and silicon wafers at different ejection angles surrounding a metal target. The ejection angles varied from 0° to 75° in increments of 15° for each substrate. It was found that the optical constants of the Nb₂O₅ films were significantly influenced by the sputtering ejection angle. The surface roughness and residual stress in the Nb₂O₅ thin films were also found to vary with the ejection angle. In this work, Nb₂O₅ films had a higher refractive index, lower absorption, lower stress and lower roughness when films deposited at an ejection angle of 30°.     

Optical properties of ZnO related to the dc sputtering power

Zinc oxide thin films were sputter deposited on (100) silicon substrates at 250 ^○C substrates temperature via reactive unbalanced dc magnetron process using pure zinc target and argon/oxygen gases. The influence of the applied dc sputtering power (between 100 to 250 Watts, step 50 Watts) on the optical properties of the grown films was systematically investigated by variable angle of incidence spectroscopic ellipsometry (VASE) technique. The refractive indices were found to follow the second-order Sellmeier dispersion relation. However, Cauchy-like dispersion model was formulated to account for the absorption tail and excitonic structure near the direct band gap. The optical properties such as refractive indices, extinction coefficients, optical band gaps, Urbach's energies, excitonic binding structure and absorption coefficients of the grown films were reported as a function of dc power in the photon energy range between 1.2 eV and 4.2 eV. The films were found to be polycrystalline with (002) preferred orientation.     

磁控溅射制备的W,WSi2,Si单层膜和W/Si,WSi2/Si多层膜应力

采用直流磁控溅射技术制备了厚度约100 nm的W,WSi2,Si单层膜和周期约为20 nm,Si膜层厚度与周期的比值为0.5的W/Si,WSi2/Si周期多层膜.利用台阶仪对镀膜前后基底表面的面形进行了测试,计算并比较了不同膜系的应力值.结果表明:W单层膜表现出较大的压应力,而W/Si周期膜则表现为张应力.WSi2单层...     

Influence of sputtering power and Ar–N2 flow on the structure and optical properties of indium nitride films prepared by magnetron sputtering

ABSTRACT

This paper discusses the deposition of indium nitride (InN) thin films on Si (100) substrates by using pulsed DC magnetron sputtering. Effects of varying sputtering power and Ar–N₂ flow ratio on the structural, morphological, and optical properties of indium nitride (InN) films were investigated. The structural characterization indicated nanocrystalline InN film with preferred orientation towards (101) plane that exhibited the optimum crystalline quality at 130?W and for 40:60 Ar–N₂ ratio. The surface morphology of InN, as observed through FESEM, contained irregularly shaped nanocrystals with size that increases with higher sputtering power and Ar:N₂ flow ratio. The optical properties of InN films were studied using ellipsometer at room temperature. The band gap of InN was decreased with the increase of sputtering power to 130?W, whereas an increase in the band gap was noticed with the increase of the Ar:N₂ flow ratio.     

Electrical and structural properties of In-doped ZnO films deposited by RF superimposed DC magnetron sputtering system

Zinc-indium-oxide (ZIO) films were deposited on non-alkali glass substrates by RF superimposed DC magnetron sputtering with a ZIO (9.54 wt% In₂O₃ content) high-density, sintered target at room temperature. The electrical, structural and optical properties of the ZIO films deposited with different sputtering parameters were examined. The total power for RF superimposed DC magnetron sputtering was 80 W. The RF power ratio in the total sputtering power was changed from 0 to 100% in steps of 25%. The ZIO films deposited with a 100% RF discharge showed the lowest resistivity, 1.28×10⁻³ Ω cm, due to the higher carrier concentration. The ZIO film deposited at 50% RF power showed a relatively larger grain size and smaller FWHM. XPS suggested an increase in the level of In³⁺ substitution for Zn²⁺ in the ZnO lattice with increasing RF/(DC+RF) due to the low damage process. The average transmittance of all ZIO films in the visible light region was >80%. The increasing RF power portion of the total sputtering power led to a broadening of the optical band gap, which was attributed to the increase in carrier density according to Burstein-Moss shift theory.     

Effects of high-energy ion-beam irradiation on structural and optical properties of (Mg0.95Co0.05)TiO3 thin films

We report the structural and optical properties of high-energy ion-beam irradiated Co-doped magnesium titanate thin films. (Mg_0.95Co_0.05)TiO₃ (MCT) thin films were deposited on quartz substrates using radio frequency magnetron sputtering. Subsequently, the films were annealed for crystallinity and were irradiated with 100?MeV Ag ions by varying the ion fluence. The X-ray diffraction patterns of the films before and after the irradiation were refined using the Rietveld refinement and the variations in the lattice parameters were correlated with the ion fluence. Although, annealing of thin films results in an enhancement in refractive index and optical bandgap, the ion fluence induces significant changes in the refractive index and optical bandgap. Atomic force microscopy is employed to study the surface morphology of the films. The impact of ion fluence on structural and optical properties of MCT thin films has been investigated.     

离子束溅射制备Nb2O5光学薄膜的特性研究

研究了离子束溅射(IBS)制备的Nb₂O₅薄膜的光学特性、应力、薄膜微结构等特性,系统地分析了辅助离子源的离子束能量和离子束流对薄膜特性的影响.结果显示,在辅助离子源不同参数情况下,折射率在波长550 nm处为2.310—2.276,应力值为-281—-152 MPa.在合适的工艺参数下,消光系数可小于10^-4,薄膜具有很好的表面平整度.与用离子辅助沉积(IAD)制备的薄膜相比,IBS制备的薄膜具有更好的光学特性和薄膜微结构. 关键词： 2O₅薄膜')" href="#">Nb₂O₅薄膜 离子束溅射 光学特性 应力     

Effect of balanced and unbalanced magnetron sputtering processes on the properties of SnO2 thin films

A comparative study has been carried on the role of balanced magnetron (BM) and unbalanced magnetron (UBM) sputtering processes on the properties of SnO₂ thin films. The oxygen partial pressure, substrate temperature and deposition pressure were kept 20%, 700 °C and 30 mTorr, respectively and the applied RF power varied in the range of 150–250 W. It is observed that the UBM deposition causes significant effect on the structural, electrical and optical properties of SnO₂ thin films than BM as evidenced by X-ray diffraction, C-V, Spectroscopic Ellipsometer and Photoluminescence measurements. The value of band gap (E_g) of the films deposited at 150 W in UBM is found as E_g = 3.83 eV which is much higher than the value of E_g = 3.69 eV as observed in BM sputtering indicating that UBM sputtering results in good crystalline quality. Further, the C-V measurements of SnO₂ thin films deposited using UBM at high power 250 W show hysteresis with large flat band shift indicating that these thin films can be used for the fabrication of memory device. The observed results have been attributed to different mechanisms which exist simultaneously under unbalanced magnetron sputtering due to ion bombardment of growing SnO₂ thin film by energetic Ar+ ions.     

Thickness dependent optical dispersion parameters and nonlinear optical properties of nanostructured Cr doped CdO thin films

Cr doped CdO thin films were deposited on glass substrates by reactive DC magnetron sputtering with varying film thickness from 250 to 400 nm. XRD studies reveal that the films exhibit cubic structure with preferred orientation along the (2 0 0) plane. The optical transmittance of the films decreases from 92 to 72%, whereas the optical energy band gap of the films decreased from 2.88 to 2.78 eV with increasing film thickness. The Wemple–DiDomenico single oscillator model has been used to evaluate the optical dispersion parameters such as dispersion energy (E_d), oscillator energy (E_o), static refractive index (n_o) and high frequency dielectric constant (ε_∞). The nonlinear optical parameters such as optical susceptibility (χ⁽¹⁾), third order nonlinear optical susceptibility (χ⁽³⁾) and nonlinear refractive index (n₂) of the films were also determined.     

Structural and electrical properties of fluorine-doped zinc tin oxide thin films prepared by radio-frequency magnetron sputtering

Transparent and conductive thin films of fluorine doped zinc tin oxide (FZTO) were deposited on glass substrates by radio-frequency (RF) magnetron sputtering using a 30 wt% ZnO with 70 wt% SnO₂ ceramic targets. The F-doping was carried out by introducing a mixed gas of pure Ar, CF₄, and O₂ forming gas into the sputtering chamber while sputtering ZTO target. The effect of annealing temperature on the structural, electrical and optical performances of FZTO thin films has been studied. FZTO thin film annealed at 600 °C shows the decrease in resistivity 5.47 × 10⁻³ Ω cm, carrier concentration ∼10¹⁹ cm⁻³, mobility ∼20 cm² V⁻¹ s⁻¹ and an increase in optical band gap from 3.41 to 3.60 eV with increasing the annealing temperatures which is well explained by Burstein–Moss effect. The optical transmittance of FZTO films was higher than 80% in all specimens. Work function (ϕ) of the FZTO films increase from 3.80 eV to 4.10 eV through annealing and are largely dependent on the amounts of incorporated F. FZTO is a possible potential transparent conducting oxide (TCO) alternative for application in optoelectronics.     

EFFECT OF ZnFe22O4 DOPING ON THE OPTICAL PROPERTIES OF TiO2 THIN FILMS

Amorphous TiO₂ thin films and ZnFe₂O₄ doped TiO₂ composite films were deposited by radio frequency magnetron sputtering. The effect of ZnFe₂O₄ doping on the optical properties of TiO₂ thin films was reported. Our results show that the absorption edge of TiO₂ thin films and composite films exhibits a blue shift with decreasing annealing temperature. The absorption edge of composite films has moved to visible spectrum range, and a very large red shift occurs in comparison with TiO₂ thin film. An enhanced photoluminescence in ZnFe₂O₄ doped anatase TiO₂ thin film at room temperature.     

Stress analysis, structure and magnetic properties of sputter deposited Ni-Mn-Ga ferromagnetic shape memory thin films

The residual stress instituted in Ni-Mn-Ga thin films during deposition is a key parameter influencing their shape memory applications by affecting its structural and magnetic properties. A series of Ni-Mn-Ga thin films were prepared by dc magnetron sputtering on Si(1 0 0) and glass substrates at four different sputtering powers of 25, 45, 75 and 100 W for systematic investigation of the residual stress and its effect on structure and magnetic properties. The residual stresses in thin films were characterized by a laser scanning technique. The as-deposited films were annealed at 600 °C for 1 h in vacuum for structural and magnetic ordering. The compressive stresses observed in as-deposited films transformed into tensile stresses upon annealing. The annealed films were found to be crystalline and possess mixed phases of both austenite and martensite, exhibiting good soft magnetic properties. It was found that the increase of sputtering power induced coarsening in thin films. Typical saturation magnetization and coercivity values were found to be 330 emu/cm³ and 215 Oe, respectively. The films deposited at 75 and 100 W display both structural and magnetic transitions above room temperature.     

Electrical and optical properties of silver doped indium oxide thin films prepared by reactive DC magnetron sputtering

Silver doped indium oxide (In_2−x Ag_x O_3−y) thin films have been prepared on glass and silicon substrates at room temperature (300 K) by reactive DC magnetron sputtering technique using an alloy target of pure indium and silver (80: 20 atomic %. The magnetron power (and hence the metal atom sputter flux) is varied in the range 40-80 W. The energy dispersive analysis of X-ray (EDAX) results show that the silver content in the film decreases with increasing magnetron power. The grain size of these films is of the order of 100 nm. The resistivity of these films is in the range 10⁻²-10⁻³ Ω cm. The work function of the silver-indium oxide films (by Kelvin Probe) are in the range: 4.64-4.55 eV. The refractive index of these films (at 632.8 nm) varies in the range: 1.141-1.195. The optical band gap of indium oxide (3.75 eV) shrinks with silver doping. Calculations of the partial ionic charge (by Sanderson's theory) show that silver doping in indium oxide thin films enhance the ionicity.     

脉冲溅射功率对含硅量子点SiC_x薄膜的结构和光学特性的影响

采用射频和脉冲磁控共溅射法并结合快速光热退火法制备了含硅量子点的SiC_x薄膜.采用掠入射X射线衍射、喇曼光谱、紫外-可见-近红外分光光度计和透射电子显微镜对薄膜进行表征.研究了脉冲溅射功率对薄膜中硅量子点数量、尺寸、晶化率和薄膜光学带隙的影响.结果表明:当溅射功率从70 W增至100 W时,硅量子点数量增多,尺寸增至5.33nm,晶化率增至68.67%,而光学带隙则减至1.62eV;随着溅射功率进一步增至110 W时,硅量子点数量减少,尺寸减至5.12nm,晶化率降至55.13%,而光学带隙却增至2.23eV.在本实验条件下,最佳溅射功率为100 W.     

Effect of environment and heat treatment on the optical properties of RF-sputtered SnO2 thin films

Thin films of SnO₂ were deposited by RF-magnetron sputtering on quartz substrates at room temperature in an environment of Ar and O₂. The XRD pattern shows amorphous nature of the as-deposited films. The optical properties were studied using the reflectance and transmittance spectra. The estimated optical band gap (E_g) values increase from 4.15 to 4.3 eV as the Ar gas content decreases in the process gas environment. The refractive index exhibits an oscillatory behavior that is strongly dependent on the sputtering gas environment. The Urbach energy is found to decrease with increase in band gap. The band gap is found to decrease on annealing the film. The role of oxygen defects is explored in explaining the variation of optical parameters.     

Gamma irradiation effects on structural and optical properties of amorphous and crystalline Nb<Subscript>2</Subscript>O<Subscript>5</Subscript> thin films

The structural and optical properties of RF sputtered Nb₂O₅ thin films are studied before and after gamma irradiation. The films are subjected to structural and surface morphological analyses by using X-ray (XRD) and field emission scanning electron microscope techniques. In the wavelength range of 300–2000 nm, the optical parameters for amorphous and crystalline Nb₂O₅ thin films are estimated at differently exposed γ-irradiation doses (0, 50, 100 and 200 kGy). The optical constants, such as optical energy band gap, absorption coefficient, refractive index and oscillators parameters of amorphous and crystalline Nb₂O₅ thin films are calculated. The optical band gaps of γ-irradiated amorphous and crystalline Nb₂O₅ thin films are determined. In the non-absorbing region, the real part of the refractive index of amorphous and crystalline Nb₂O₅ thin films slightly increases with the increase in the exposed γ-irradiation dose.