C60衍生物的MALDI-TOFMS分析

C_(60)衍生物在超导、非线性光学、催化、材料和生物活性等方面有巨大的潜在应用价值。C_(60)衍生物大多为固体,蒸汽压较低,采用需要加热才能够使样品气化电离的质谱或"硬"电离质谱方法进行测定,易造成C_(60)衍生物分解并释放出配体。近年来国内外应用基体辅助激光解吸软电离质谱法成功分析了许多不同类型的C_(60)衍生物如卤化C_(60)酰胺化C_(60)芳基化C_(60)、C_(60)部花菁、煤基C_(60)烟灰萃取产物、金属C_(60)衍生物以及C_(60)乙二胺膜等。本文报道采用MALDI-TOFMS法分析C_(60)酯衍生物和C_(60)吡咯烷衍生物的结果。     

Matrix‐enhanced secondary ion mass spectrometry: the influence of MALDI matrices on molecular ion yields of thin organic films

In this work the effect in secondary ion mass spectrometry (SIMS) of several frequently used matrix‐assisted laser desorption/ionisation (MALDI) matrices on the secondary ion intensities of low molecular weight (m/z 400–800) organic dyes and a pharmaceutical is tested. Matrix (10^?1 M) and analyte (10^?2 M) solutions were made in methanol. Mixtures with several concentration ratios were prepared from these solutions and spincoated on Si substrates prior to time‐of‐flight (TOF)‐SIMS analysis. In some cases the presence of the MALDI matrices caused a considerable increase in the positive secondary (protonated) molecular ion signals. Enhancements of a factor of 20 and more were recorded. Generally, of the matrices used, 2,5‐dihydroxybenzoic acid and 2,4,6‐trihydroxyacetophenone brought about the highest intensity increases. It was also shown that matrix‐enhanced (ME‐)SIMS is capable of lowering the detection limits for molecule ions. However, the enhancement effect is strongly influenced by the analyte/matrix combination and its concentration ratio. As a result, finding an optimal analyte/matrix mixture can be a very time‐consuming process. Mostly, the presence of the matrices causes changes in the relative ion intensities in the TOF‐S‐SIMS spectra. Compared to the spectra recorded from samples without matrices, only a few additional peaks, such as signals that originate directly from the applied matrix or adduct ions, are observed in the mass spectra. Sometimes molecule ions and some characteristic fragments at high m/z values, that cannot be recorded without matrix, do appear in the spectrum when a matrix is present. In the negative mode no enhancement effect is observed on applying the studied MALDI matrices. The results obtained from samples treated with MALDI matrices are also compared to SIMS results for the same samples after Ag and Au metallisation (MetA‐SIMS). For three of the four tested compounds Au MetA‐SIMS resulted in higher ion yields than ME‐SIMS. For both techniques possible mechanisms that can account for the enhancement effect are proposed. Copyright © 2005 John Wiley & Sons, Ltd.     

5-Ethyl-2-mercaptothiazole as matrix for matrix-assisted laser desorption/ionization of a broad spectrum of analytes in positive and negative ion mode

A preliminary investigation of the use of 5-ethyl-2-mercaptothiazole as matrix in matrix-assisted laser desorption/ionization (MALDI) of a broad spectrum of analytes is reported. The analytes studied are substance P, insulin, beta-cyclodextrin, triacylglycerols of coconut oil and polypropylene glycol 2000 (PPG 2000). In the positive ion mass spectra of the matrix/analyte combinations, the formation of [M + H]+ and [M + cation]+ species were observed and compared with those obtained by using well-established matrices such as alpha-cyano-4-hydroxycinnamic acid, genticic acid, sinapinic acid and dithranol. In addition, the usefulness of this new matrix for MALDI in negative ion mode is also described using substance P and beta-cyclodextrin as examples.     

Matrix/analyte ratio influencing polymer molecular weight distribution in matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry

Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF‐MS) has been used to characterize poly(L‐lysine) polymers and unique oligomer peptides, like 10‐, 15‐ and 25‐mer [Lys]_n oligolysine peptides. Several matrices have been tried in order to find optimal conditions, but only α‐cyano‐4‐hydroxycinnamic acid gave analytically useful spectra. The synthetic oligomers and their mixtures gave good quality spectra, showing protonated and cationized molecules, including doubly charged species. The polymers, analogously, gave a wide distribution of single‐ and double‐cationized peak series. The polymer distributions observed indicate the presence of significant suppression effects. The concentration (matrix/analyte ratio) was found to influence the results significantly; distributions shifting to higher masses when higher polymer concentrations were used. This effect was studied in detail using the synthetic (‘monodisperse’) oligolysine peptides. It was found that the relative intensities change by over an order of magnitude in the 0.1–10 pmol/µL concentration range (typical for most proteomic analyses). The results indicate that concentration effects need to be considered when MALDI‐MS is used for quantitative purposes. Copyright © 2009 John Wiley & Sons, Ltd.     

MALDI‐TOF mass spectrometry characterization of C60 end‐capped polystyrene prepared by ATRP

The ATRP (atom‐transfer radical polymerization) process was used to synthesize C₆₀ end‐capped polystyrene. GPC data demonstrated that fullerene (C₆₀) was chemically bonded to polystyrene, and C₆₀ was most likely monosubstituted. Matrix‐assisted laser desorption/ionization‐time of flight (MALDI‐TOF) mass spectrometry (MS) analysis (with 1,8‐dihydroxy‐9(10H)‐anthracenone (dithranol)/silver trifluoroacetate as the matrix) of this copolymer proved that C₆₀ was monosubstituted.     

2‐(2‐Aminoethylamino)‐5‐nitropyridine as a basic matrix for negative‐mode matrix‐assisted laser desorption/ionization analysis of phospholipids

Fast and easy analysis of phospholipids (PLs) by matrix‐assisted laser desorption/ionization mass spectrometry (MALDI‐MS) has been well demonstrated. However, when using common organic matrices, such as 2,5‐dihydroxybenzoic acid (DHB), the detection of most PL classes in positive‐ion mode is difficult when PLs containing zwitterionic groups, such as phosphatidylcholines (PCs) and sphingomyelins (SMs) are present. To reduce this limitation, 2‐(2‐aminoethyloamino)‐5‐nitropyridine (AAN), a basic compound, was evaluated as an alternative matrix. Negative‐ion spectra showed enhanced detection of phosphatidyl ethanolamines (PEs), phosphatidyl serines (PSs), phosphatidyl glycerols (PGs), and phosphatidyl inositols (PIs) in simple mixtures and in a crude methanolic soybean extract. The relative ionization efficiency (RIE) was highest for PIs and lowest for PGs, PSs, and PEs. Compared to DHB and para‐nitroaniline, AAN resulted in greater sensitivity for the detection of PL classes in the negative mode. Indeed, the S/N ratio was nearly an order of magnitude higher than that reported for similar PI concentrations but with DHB. MALDI spots produced with AAN were homogeneous thus allowing automation and improved reproducibility. Positive‐mode traces could also be acquired with AAN as the matrix, but with lower sensitivity than in the negative mode. Copyright © 2008 John Wiley & Sons, Ltd.     

Liquid‐Crystalline Mixed [5 : 1]Hexa‐adducts of [60]Fullerene. Preliminary Communication

A liquid‐crystalline mixed [5 : 1]hexa‐adduct of [60]fullerene was synthesized by addition of two different malonate derivatives onto C₆₀. The hexa‐adduct derivative 2 was prepared by a stepwise synthetic procedure (fullerene→mono‐adduct of C₆₀→hexa‐adduct of C₆₀). Cyanobiphenyl and octyloxybiphenyl derivatives were selected as mesogens. The malonate derivatives showed either a monotropic nematic phase or a monotropic smectic A phase, and the hexa‐adduct derivative gave rise to an enantiotropic smectic A phase.     

A second‐generation ionic liquid matrix‐assisted laser desorption/ionization matrix for effective mass spectrometric analysis of biodegradable polymers

A second generation ionic liquid matrix (ILM), N,N‐diisopropylethylammonium α‐cyano‐4‐hydroxycinnamate (DEA‐CHCA), was developed for the characterization of polar biodegradable polymers. It is compared with five solid matrices typically used for the characterization of these polymers and one other new ILM. It is shown that use of the ILM, DEA‐CHCA, allows maximum signal with minimum laser intensity which minimizes polymer degradation. In these conditions, the DEA‐CHCA ILM is able to assist in the ionization of analytes in an efficient but soft manner. These qualities produce spectra that allow an accurate and sensitive determination of the number average molecular weights, weight average m.w., and polydispersity index of labile polar polymers. With such polymers, many solid matrices produce spectra showing extensive polymer degradation leading to the underestimation of molecular weights. The distribution of intact analyte peaks obtained with the ILM DEA‐CHCA allows for identification of the fine structure of complex copolymers. ILMs were much less susceptible to effects of extraction delay times on molecular weight determination than were solid matrices. The liquid nature of the matrix is an important reason for the outstanding results obtained for labile analyte polymers. No comparable results could be obtained with any known solid matrices or other ILMs. In many cases, the manufacturers' listed molecular weights and polydispersity measurements for biodegradable polymers are determined by size‐exclusion chromatography and the data obtained by that method may differ considerably from the high‐precision matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF‐MS) results presented here. Copyright © 2009 John Wiley & Sons, Ltd.     

Investigation of colloidal graphite as a matrix for matrix‐assisted laser desorption/ionisation mass spectrometry of low molecular weight analytes

The analysis of low molecular weight compounds by matrix‐assisted laser desorption/ionisation mass spectrometry is problematic due to the interference and suppression of analyte ionisation by the matrices typically employed – which are themselves low molecular weight compounds. The application of colloidal graphite is demonstrated here as an easy to use matrix that can promote the ionisation of a wide range of analytes including low molecular weight organic compounds, complex natural products and inorganic complexes. Analyte ionisation with colloidal graphite is compared with traditional organic matrices along with various other sources of graphite (e.g. graphite rods and charcoal pencils). Factors such as ease of application, spectra reproducibility, spot longevity, spot‐to‐spot reproducibility and spot homogeneity (through single spot imaging) are explored. For some analytes, considerable matrix suppression effects are observed resulting in spectra completely devoid of matrix ions. We also report the observation of radical molecular ions [M^–●] in the negative ion mode, particularly with some aromatic analytes. Copyright © 2016 John Wiley & Sons, Ltd.     

MALDI‐MS of flavonoids: a systematic investigation of ionization and in‐source dissociation mechanisms

Matrix assisted laser desorption ionization (MALDI) is a technique widely employed in the analysis of proteins and peptides, and nowadays it has also been applied to small molecules. There is little significant information regarding the in‐source dissociation processes on MALDI for natural products. Twenty‐six flavonoids (flavanones, flavones and flavonols) were analyzed by MALDI using different methods (with different matrices) and without matrix to comprehend the in‐source reactions and establish good analysis methods for these compounds. Depending on the class, structure and the laser intensity applied, methoxylated flavonoid aglycones can eliminate methyl radicals (˙CH₃) in the source, such as flavonols, but lithium 2,4‐dihydroxybenzoate matrix suppresses the ˙CH₃ eliminations and retro‐Diels–Alder cleavages in the source. All of the flavonoid O‐glycosides evaluated herein eliminated the sugar in source, even in the presence of the matrix, and its product radical ions ([M‐H‐sugar]^?˙) were observed in the negative mode. The flavone C‐glycosides suffered intense dissociation, which was reduced by the addition of a matrix and the application of low laser intensity, mainly in the negative mode. Depending on the hydroxyl substituents, the [M‐H‐H]^?˙ ion was observed with variable relative intensity in the spectra. Copyright © 2015 John Wiley & Sons, Ltd.     

Accurate mass measurement by matrix‐assisted laser desorption/ionisation time‐of‐flight mass spectrometry. II. Measurement of negative radical ions using porphyrin and fullerene standard reference materials

A method for the accurate mass measurement of negative radical ions by matrix‐assisted laser desorption/ionisation time‐of‐flight mass spectrometry (MALDI‐TOFMS) is described. This is an extension to our previously described method for the accurate mass measurement of positive radical ions (Griffiths NW, Wyatt MF, Kean SD, Graham AE, Stein BK, Brenton AG. Rapid Commun. Mass Spectrom. 2010; 24: 1629). The porphyrin standard reference materials (SRMs) developed for positive mode measurements cannot be observed in negative ion mode, so fullerene and fluorinated porphyrin compounds were identified as effective SRMs. The method is of immediate practical use for the accurate mass measurement of functionalised fullerenes, for which negative ion MALDI‐TOFMS is the principal mass spectrometry characterisation technique. This was demonstrated by the accurate mass measurement of six functionalised C₆₀ compounds. Copyright © 2010 John Wiley & Sons, Ltd.     

Mass spectrometry of rhenium complexes: a comparative study by using LDI‐MS,MALDI‐MS,PESI‐MS and ESI‐MS

A group of rhenium (I) complexes including in their structure ligands such as CF₃SO₃‐, CH₃CO₂‐, CO, 2,2′‐bipyridine, dipyridil[3,2‐a:2′3′‐c]phenazine, naphthalene‐2‐carboxylate, anthracene‐9‐carboxylate, pyrene‐1‐carboxylate and 1,10‐phenanthroline have been studied for the first time by mass spectrometry. The probe electrospray ionization (PESI) is a technique based on electrospray ionization (ESI) that generates electrospray from the tip of a solid metal needle. In this work, mass spectra for organometallic complexes obtained by PESI were compared with those obtained by classical ESI and high flow rate electrospray ionization assisted by corona discharge (HF‐ESI‐CD), an ideal method to avoid decomposition of the complexes and to induce their oxidation to yield intact molecular cation radicals in gas state [M]^+. and to produce their reduction yielding the gas species [M]^–.. It was found that both techniques showed in general the intact molecular ions of the organometallics studied and provided additional structure characteristic diagnostic fragments. As the rhenium complexes studied in the present work showed strong absorption in the UV–visible region, particularly at 355 nm, laser desorption ionization (LDI) mass spectrometry experiments could be conducted. Although intact molecular ions could be detected in a few cases, LDI mass spectra showed diagnostic fragments for characterization of the complexes structure. Furthermore, matrix‐assisted laser desorption ionization (MALDI) mass spectra were obtained. Nor‐harmane, a compound with basic character, was used as matrix, and the intact molecular ions were detected in two examples, in negative ion mode as the [M]^–. species. Results obtained with 2‐[(2E)‐3‐(4‐tert‐buthylphenyl)‐2‐methylprop‐2‐enylidene] malononitrile (DCTB) as matrix are also described. LDI experiments provided more information about the rhenium complex structures than did the MALDI ones. Copyright © 2012 John Wiley & Sons, Ltd.     

Laser desorption/ionization mass spectrometric analysis of small molecules using fullerene‐derivatized silica as energy‐absorbing material

In spite of the growing acceptance of matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry for the analysis of a wide variety of compounds, including polymers and proteins, its use in analyzing low‐molecular‐weight molecules (<1000m/z) is still limited. This is mainly due to the interference of matrix molecules in the low‐mass range. Here the derivatized fullerenes covalently bound to silica particles with different pore sizes are applied as thin layer for laser desorption/ionization (LDI) mass spectrometric analysis. Thus, an interference of intrinsic matrix ions can be eliminated or minimized in comparison with the state‐of‐the‐art weak organic acid matrices. The desorption/ionization ability of the developed fullerene–silica materials depends on the applied laser power, sample preparation and pore size of the silica particles. Thus, fullerene–silica serves as an LDI support for mass spectrometric analysis of molecules (<1500 Da). The performance of the fullerene–silica is demonstrated by the mass analysis of variety of small molecules such as carbohydrates, amino acids, peptides, phospholipids and drugs. Copyright © 2010 John Wiley & Sons, Ltd.     

Negative ion production from peptides and proteins by matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry

Negative ion production from peptides and proteins was investigated by matrix‐assisted laser desorption/ionization time‐of‐flight (MALDI‐TOF) mass spectrometry. Although most research on peptide and protein identification with ionization by MALDI has involved the detection of positive ions, for some acidic peptides protonated molecules are not easily formed because the side chains of acidic residues are more likely to lose a proton and form a deprotonated species. After investigating more than 30 peptides and proteins in both positive and negative ion modes, [M–H]⁻ ions were detected in the negative ion mode for all peptides and proteins although the matrix used was 2,5‐dihydroxybenzoic acid (DHB), which is a good proton donor and favors the positive ion mode production of [M+H]⁺ ions. Even for highly basic peptides without an acidic site, such as myosin kinase inhibiting peptide and substance P, good negative ion signals were observed. Conversely, gastrin I (1‐14), a peptide without a highly basic site, will form positive ions. In addition, spectra obtained in the negative ion mode are usually cleaner due to absence of alkali metal adducts. This can be useful during precursor ion isolation for MS/MS studies. Copyright © 2008 John Wiley & Sons, Ltd.     

Gas‐phase fragmentation of protonated C60‐pyrimidine derivatives

Electrospray ionization mass spectrometry/mass spectrometry (ESI/MS/MS) and multiple stage mass spectrometry (MSⁿ, n > 2) were used in the positive ion mode, with two different types of mass spectrometers, a quadrupole time‐of‐flight and an ion trap, to characterize two sets of different types of C₆₀‐aminopyrimidine exohedral derivatives. In one set, the pyrimidine moiety bears an amino acid methyl ester residue, and in the other the pyrimidine ring is part of a nucleoside‐type moiety, the latter existing as two separated diastereoisomers. We have found that retro‐cycloaddition processes occur for the closed shell protonated species formed by electrospraying C₆₀ derivatives synthesized by Diels–Alder reactions, whereas for the C₆₀ derivatives synthesized via 1,3‐dipolar cycloadditions, these processes did not occur. Formation of diagnostic ions allowed the differentiation between the two groups of fullerene derivatives, and between the diastereoisomers of C₆₀ derivatives with a nucleoside‐type moiety. In general, the fragmentation processes are strongly dependent on the protonation sites and on the structure of the exohedral moieties. Copyright © 2009 John Wiley & Sons, Ltd.     

Quantitative reproducibility of mass spectra in matrix‐assisted laser desorption ionization and unraveling of the mechanism for gas‐phase peptide ion formation

In a previous study on matrix‐assisted laser desorption ionization (MALDI) of peptides using α‐cyano‐4‐hydroxycinnamic acid (CHCA) as a matrix, we found that the patterns of single‐shot spectra obtained under different experimental conditions became similar upon temperature selection. In this paper, we report that absolute ion abundances are also similar in temperature‐selected MALDI spectra, even when laser fluence is varied. The result that has been obtained using CHCA and 2,5‐dihydroxybenzoic acid as matrices is in disagreement with the hypothesis of laser‐induced ionization of matrix as the mechanism for primary ion formation in MALDI. We also report that the total number of ions in such a spectrum is unaffected by the identity, concentration and number of analytes, i.e. it is the same as that in the spectrum of pure matrix. We propose that the generation of gas‐phase ions in MALDI can be explained in terms of two thermal reactions, i.e. the autoprotolysis of matrix molecules and the matrix‐to‐analyte proton transfer, both of which are in quasi‐equilibrium in the early matrix plume. Copyright © 2013 John Wiley & Sons, Ltd.     

Characterization of N‐Boc/Fmoc/Z‐N′‐formyl‐gem‐diaminoalkyl derivatives using electrospray ionization multi‐stage mass spectrometry

N‐Boc/Fmoc/Z‐N′‐formyl‐gem‐diaminoalkyl derivatives, intermediates particularly useful in the synthesis of partially modified retro‐inverso peptides, have been characterized by both positive and negative ion electrospray ionization (ESI) ion‐trap multi‐stage mass spectrometry (MSⁿ). The MS² collision induced dissociation (CID) spectra of the sodium adduct of the formamides derived from the corresponding N‐Fmoc/Z‐amino acids, dipeptide and tripeptide acids show the [M + Na‐NH₂CHO]⁺ ion, arising from the loss of formamide, as the base peak. Differently, the MS² CID spectra of [M + Na]⁺ ion of all the N‐Boc derivatives yield the abundant [M + Na‐C₄H₈]⁺ and [M + Na‐Boc + H]⁺ ions because of the loss of isobutylene and CO₂ from the Boc protecting function. Useful information on the type of amino acids and their sequence in the N‐protected dipeptidyl and tripeptidyl‐N′‐formamides is provided by MS² and subsequent MSⁿ experiments on the respective precursor ions. The negative ion ESI mass spectra of these oligomers show, in addition to [M‐H]^?, [M + HCOO]^? and [M + Cl]^? ions, the presence of in‐source CID fragment ions deriving from the involvement of the N‐protecting group. Furthermore, MSⁿ spectra of [M + Cl]^? ion of N‐protected dipeptide and tripeptide derivatives show characteristic fragmentations that are useful for determining the nature of the C‐terminal gem‐diamino residue. The present paper represents an initial attempt to study the ESI‐MS behavior of these important intermediates and lays the groundwork for structural‐based studies on more complex partially modified retro‐inverso peptides. Copyright © 2013 John Wiley & Sons, Ltd.     

Effects of substrate surfaces in matrix‐assisted laser desorption/ionization mass spectrometry

For matrix‐assisted laser desorption/ionization (MALDI) mass spectra, undesirable ion contamination can occur due to the direct laser excitation of substrate materials (i.e., laser desorption/ionization (LDI)) if the samples do not completely cover the substrate surfaces. In this study, comparison is made of LDI processes on substrates of indium and silver, which easily emit their own ions upon laser irradiation, and conventional materials, stainless steel and gold. A simultaneous decrease of ion intensities with the number of laser pulses is observed as a common feature. By the application of an indium substrate to the MALDI mass spectrometry of alkali salts and alkylammonium salts mixed with matrices, 2,5‐dihydroxybenzoic acid (DHB) or N‐(4‐methoxybenzylidene)‐4‐butylaniline (MBBA), the mixing of LDI processes can be detected by the presence of indium ions in the mass spectra. This method has also been found to be useful for investigating the intrinsic properties of the MALDI matrices: DHB samples show an increase in the abundance of fragment ions of matrix molecules and cesium ions with the number of laser pulses irradiating the same sample spot; MBBA samples reveal a decrease in the level of background noise with an increase in the thickness of the sample layer. Copyright © 2009 John Wiley & Sons, Ltd.     

norHarmane containing ionic liquid matrices for low molecular weight MALDI‐MS carbohydrate analysis: The perfect couple with α‐cyano‐4‐hydroxycinnamic acid

Cinnamic acid derivatives, particularly α‐cyano‐4‐hydroxycinnamic acid (E‐α‐cyano‐4‐hydroxycinnamic acid or (E)‐2‐cyano‐3‐(4‐hydroxyphenyl)prop‐2‐enoate; CHCA), have been extensively used especially for protein and peptide analysis. Together with the introduction of ionic liquid MALDI matrix (ILM) started the study of applications of IL prepared with CHCA and a counter organic base (ie, aliphatic amines) in which CHCA moiety is the chromophore responsible of UV‐laser absorption. Despite the extensive studies of norharmane (9H‐pyrido[3,4‐b]indole; nHo) applications as matrix and its peculiar basic properties in the ground and electronic excited state, nHo containing ILM was never tested in MALDI‐MS experiments. This pyrido‐indole compound was introduced as MALDI matrix 22 years ago for different applications including low molecular weight (LMW) carbohydrates (neutral, acidic, and basic carbohydrates). These facts encouraged us to use it as a base, for the first time, for ILM preparation. As a rational design of new IL MALDI matrices, E‐α‐cyanocinnamic acid.nHo and E‐cinnamic acid.nHo were prepared and their properties as matrices studied. Their performance was compared with that of (a) the corresponding IL prepared with butylamine as basic component, (b) the corresponding crystalline E‐α‐cyanocinnamic and E‐cinnamic acid, and (c) the classical crystalline matrices (2,5‐dihydroxybenzoic acid, DHB; nHo) used in the analysis of neutral/sulfated carbohydrates. The IL DHB.nHo was tested, too. Herein, we demonstrate the outstanding performance for the IL CHCA.nHo for LMW carbohydrate in positive and negative ion mode (linear and reflectron modes). Sulfated oligosaccharides were detected in negative ion mode, and although the dissociation of sulfate groups was not completely suppressed the relative intensity (RI) of [M ? Na]^? peak was quite high. Additionally, to better understand the quite different performance of each IL tested as matrix, the physical and morphological properties in solid state were studied (optical image; MS image).     

9,10‐Diphenylanthracene as a matrix for MALDI‐MS electron transfer secondary reactions

The most common secondary‐ionization mechanism in positive ion matrix‐assisted laser desorption/ionization (MALDI) involves a proton transfer reaction to ionize the analyte. Peptides and proteins are molecules that have basic (and acidic) sites that make them susceptible to proton transfer. However, non‐polar, aprotic compounds that lack basic sites are more difficult to protonate, and creating charged forms of this type of analyte can pose a problem when conventional MALDI matrices are employed. In this case, forming a radical molecular ion through electron transfer is a viable alternative, and certain matrices may facilitate the process. In this work, we investigate the performance of a newly developed electron‐transfer secondary reaction matrix: 9,10‐diphenylanthracene (9,10‐DPA). The use of 9,10‐DPA as matrix for MALDI analysis has been tested using several model compounds. It appears to promote ionization through electron transfer in a highly efficient manner as compared to other potential matrices. Thermodynamic aspects of the observed electron transfers in secondary‐ionization reactions were also considered, as was the possibility for kinetically controlled/endothermic, electron‐transfer reactions in the MALDI plume. Copyright © 2012 John Wiley & Sons, Ltd.