Synthese von ‘D-Isothreonin’ und ‘L-Alloisothreonin’ aus L-Alanin

Synthesis of ‘D -Isothreonine’ and ‘L -Alloisothreonine’ Starting from L -Alanine Starting from L -alanine, ‘D -isothreonine’ ( = (2R, 3S)-3-amino-2-hydroxybutanoic acid) and ‘L -alloisothreonine’ ( = (2S, 3S)-3-amino-2-hydroxybutanoic acid) were synthesized.     

Der ‘Push-Pull’-Effekt von ‘Push-Pull’-Oligoacetylenen. Eine 13C-NMR-Untersuchung

The ‘Push-Poll’ Effect of ‘Push-Pull’ Oligoacetylenes. A ¹³C-NMR Investigation According to ¹³C-chemicaI shifts of ‘push-pull’ oligoacetylenes 1 – 4 , the ‘push-pull’ effect (i.e. π delocalization induced by ‘push-pull’ substituents) rapidly decays in this series. To correct for other than π -charge-density effects, Δδ values of symmetrically placed C-atoms of the oligoacetylene chain are discussed. Stereoelectronic resteffects (SER) of the substituents on terminal C-atoms of PP-ketones 1a – 3a and PP -esters 1b – 4b are estimated from the residual Δδ of the asymptotes of Fig. 3. Fig. 4 convincingly shows that Δδ values are dramatically decreasing with increasing number n of acetylene units between the push and pull substituents. Assignment problems of ‘push-pull’ triacetylenes 3 have been solved by ¹³C labelling of the CO group of 3a .     

The ‘even-electron rule’

Many (>170) exceptions to the ‘even-electron rule from the literature (unrecognized in most cases) and from the authors’ laboratory are presented and discussed. The large number of violations suggests that although the generalization may be a helpful guide for the explanation of mass spectral behaviour of many organic compounds, the term ‘rule’ seems to be unjustified.     

Synthese von ‘Push-Pull’-Diacetylenen

Synthesis of ‘Push-Pull’ Diacetylenes The first synthesis of push-pull diacetylenes of type 1 is described. Reaction of perchlorobutenyne ( 8 ) with two equivalents of dialkylamine, followed by dechlorination using two equivalents of butyllithium gives lithio-dialkylamino-diynes 7 . Final acylation of these intermediates leads to push-pull diacetylenes 1b–1e in good yields. The method allows the introduction of both push and pull substituents in a simple one-pot-procedure. In addition, 1a is prepared by hydroxymethylation of lithio-morpholino-diyne 7c , followed by oxidation with manganese dioxide in acetone.     

Synthese von ‘Push-Pull’-Oligoacetylenen

Synthesis of ‘Push-Pull’-OligoAcetylenes ‘Push-pull’ triacetylenes 11a , b , c , as well as ‘push-pull’ tetraacetylene 13b have been prepared by reaction of the corresponding trichloroene(oligoinyl)amines 9 and 10 with 2 mol-equiv. of BuLi followed by acylation. The sequences (Schemes 3 and 4) are very simple and straightforward, they could in principle be applied to the synthesis of ‘push-pull’ pentaAcetylenes 15 and hexaacetylenes 17 (Scheme 5). Main limitations are the moderate yields as well as the low thermal stability of push-pull oligoacetylenes.     

Synthetic Attempts towards ‘Aromatic’ Nonafulvenes

According to their spectroscopic behavior, four classes of nonafulvenes may be distinguished, but, so far, only three classes have been identified. Type-A nonafulvenes (including parent 1a ) are typically olefinic molecules with strongly alternating bond lengths and a nonplanar nine-membered ring. Type-B nonafulvenes are characterized by four pairs of equivalent ring H-atoms and ring C-atoms. Spectra of both Type-A and Type-B nonafulvenes are not dependent on temperature and solvent polarity. However, spectra of Type-C nonafulvenes (including prototype 1d with R¹ = R² = NMe₂) are strongly influenced by temperature and solvent polarity due to an equilibrium 1?1 ^± between the nonpolar olefinic 1 and dipolar planarized 1 ^±. So far, Type-D nonafulvenes occurring exclusively in the dipolar form 1 ^± were unknown. Synthetic attempts towards nonafulvenes of Type D are described and problems encountered in nonafulvene syntheses are discussed. Several new cyclononatetraenes and four new nonafulvenes (or nonafulvalenes) 31, 1n, 3 , and 5 have been synthesized. Spectroscopic evidence shows that 11,12-bis(diethylamino)nonatriafulvalene 5 is the first Type-D nonafulvene.     

Tetrametallic Group 13 ‘Mitsubishi’ Molecules

Under fairly disparate conditions tetrametallic aluminum complexes can be isolated that feature a central six-coordinate aluminum connected by bridging heteroatoms to three peripheral four-coordinate aluminum atoms. Based upon their striking resemblance to the Mitsubishi emblem these molecules will be given the name ‘Mitsubishi™’ [1]. This review will discuss the formation of these compounds and will seek to establish the guiding principles under which additional ‘Mitsubishi™’ compounds may be formed. The impact of these compounds on the formation of solid-state materials, particularly aluminum oxide, will be briefly discussed.     

Field desorption ‘without fields’?

A field independent thermal desorption of ions has been suggested to occur under conditions of field desorption mass spectrometry by several authors. It is shown that these speculations are incorrect for theoretical reasons and inconsistent with experimental facts.     

‘Lone Pair’ and ‘CI Bond’ Ionization Energies of exo- and endo-2-Norbornyl Iodides

A PE-spectroscopic study of exo- and endo-2-norbornyl iodides suggests that the relative ability of the 2-norbornyl group to stabilize an electron deficiency on a substituent X (e.g. I) in exo- or endo-position depends on the location of the positive charge. There is no difference if the positive hole is strongly localized on on the substituent X (e.g. the 5p^?1 state of the title compounds). On the other hand, our results indicate that teh positive hole semi-localized in an exo-C? X bond is better stabilized by the 2-norbornyl group than a semi-localized, positive hole in an endo-C? X bond.     

Synthese von ‘Push-Pull’- Eninen

Synthesis of ‘Push-Pull’ Enynes ‘Push-pull’ enynes 1a–1f are easily available by Pd catalyzed coupling of stannyl-ynamines 15 and silylynamines 16 with β-iodo-enones 8 (Schemes 7 and 8).     

Heterogeneous ‘Organoclick’ Derivatization of Polysaccharides

Summary: A simple method for the direct catalytic heterogeneous modification of polysaccharides is presented. The novel method is exemplified by the combination of organic acid‐catalyzed esterification and copper‐catalyzed Huisgen reaction (click chemistry) to attach a fluorescent probe to solid cellulose. The heterogeneous ‘organoclick’ derivatization of cellulose allows for a mild, highly modular surface modification of cellulose under environmentally benign reaction conditions.

Schematic of the combined organic acid‐catalyzed esterification and copper‐catalyzed Huisgen reaction (click chemistry) to modify a polysaccharide with a fluorescent probe.     

‘Tailored’ polymers for supported syntheses using boronic acids

A diethanolamine pendant polystyrene polymer was prepared by the copolymerization of diethanolaminomethyl styrene, styrene, and divinylbenzene. The composition of the polymer resins produced agreed with copolymerization starting ratios. The polymer resins readily immobilized phenylboronic acid in THF and released pure phenylboronic acid quantitatively in THF/water/acetic acid.     

Lithium Enolates: ‘Capricious’ Structures – Reliable Reagents for Synthesis

The first part of this review article deals with the structures of enolates. The development of research in this field during the last half century will be illustrated by highlightening seminal contributions, while, by no means, an attempt of comprehensiveness is made: the choice of spotlights has, admittedly, a personal touch. Aside from derivatization of lithium enolates and their crystal structures that meanwhile are classics, more recent solution studies are presented. In the second part, it will be shown by contributions of our laboratory that, despite their complicated structures, lithium enolates are reliable ‘workhorses’ in synthesis with emphasis being given to stereoselective C? C bond forming reactions due to the Pd‐catalyzed allylic alkylation of non‐stabilized, preformed enolates.     

‘Fast atom bombardment’—A rediscovered method for mass spectrometry

In 1966, Devienne and co-workers studied extensively the sputtering of various target materials by a high energy molecular beam obtained by charge exchange. They obtained secondary ions that characterized for instance, organic and biological materials. These ions were analysed by mass spectrometry. This method was developed to be patented and many devices were studied. The principle of the apparatus constructed is very simple. An ion source produces an ion current of some microamperes. The ions are accelerated at some keV, and injected into a collision chamber in order to obtain a neutral beam by resonant charge exchange. The residual ions are deflected and this beam bombards the target. The target itself is surrounded by a small metal cylinder which is held at an appropriate potential to extract the positive or negative secondary ions formed. The ion beam is accelerated and focused into the entrance slit of a mass spectrometer. After the first devices, two types of apparatus were built in 1973 and 1975. With the first one, the analysis of the masses was obtained only by an electromagnet. The energy range of the secondary ions varied from 1 to 10 keV. The second apparatus was formed by an electromagnet, a dissociation chamber, and an electrostatic analyser. With this apparatus, it was possible to measure directly masses as large as 6000 daltons. With the first apparatus it was possible to study the adsorption of oxygen on silicon, and to obtain spectra, of many organics such as camphor, nitrodiphenylamine and, as in the earlier device, the spectrum of a non-volatile organic liquid diethylhexyl azelate, was obtained. After studies on different uranium compounds and their dissociations, the second apparatus was devoted to the formation and study of the chemical properties of clusters.     

‘One-Pot’ Synthesis of Raumacline from Ajmaline

For the alkaloid raumacline ( 2 ), which is a biotransformation product of ajmaline ( 1 ) in Rauwolfia serpentina cell cultures, an efficient ‘one-pot’ synthesis was developed using a NaBH₄/riboflavin/light-mediated transformation of 1 into 2 with a total yield of 86%.     

Tetrazinodiheteroarene: ‘Charge-Transfer’-Komplexbildung mit Akzeptorverbindungen

Charge-Transfer Complexes of Tetrazinodiheteroarenes with Acceptor Compounds The formation of charge-transfer complexes and radical-ion pairs of donor compounds 1 – 6 with acceptor compounds 7 – 12 has been investigated by means of VIS/NIR-spectroscopic methods. The equilibrium constants K_CT up to 1100_M-1 for the donor/acceptor couple dipyrido[1,2-b:1,2′-e][1,2,4,5]tetrazine ( 2 )/ethylenetetracarbonitrile ( 11 ) and spectra of the CT complexes have been determined in 1,2-dichloroethane solution at 25°. Results are discussed in relation to known CT-complex properties and to voltammetric redox-potentials E_1/2.     

Versuche zur Synthese von ‘Push-Pull’-Diacetylenen

Attempted Synthesis of Push-Pull Diacetylenes Two alternative synthesis of push-pull diacetylenes of type 1 (5-amino-2,4-alkadiynals) are investigated. A bromination-dehydrobromination sequence starting with 5-dimethylamino-2,4-pentadienal ( 2 ) as well as the application of the well-known Cadiot-Chodkiewicz coupling reaction give new intermediates 3–5 , and 7 and 8 , respectively, but fail to give the target molecules 1 .