Hydrogen‐bonded network in biphenyl‐4,4′‐diphosphonic acid

The crystal structure of the title compound, C₁₂H₁₂O₆P₂, displays two different regions alternating along the a axis: a hydrogen‐bonded region encompassing the end‐positioned phosphonic acid groups and a hydrophobic region formed by the aromatic spacers. The asymmetric unit contains only half of the biphenyl‐4,4′‐diphosphonic acid (4,4′‐bpdp) molecule, which is symmetric with an inversion centre imposed at the mid‐point between the two aromatic rings. The periodic organization of the molecules is controlled by two strong O—H...O interactions between the phosphonic acid sites. Weak C—H...π interactions are established in the aromatic regions.     

Two Disparate 2‐fold Interpenetrating Frameworks Constructed from ZnII, 4,4′‐Dipyridyl Disulfide and Maleic/ Fumaric Acid

The reaction of Zn^II nitrate with maleic acid (H₂mal) / fumaric acid (H₂fum) and 4,4′‐dipyridyl disulfide (4‐pds) resulted under same conditions in two distinct interpenetrated compounds, namely [Zn(4‐dps)₂(H₂O)₂]·2Hmal ( 1 ) and [Zn(4‐dps)(fum)] ( 2 ). In 1 , Hmal anion adopts bridging mode based on hydrogen bonding, affording a 2‐fold parallel interpenetrated 3D→3D α‐Po net hydrogen‐bonded framework, in which 1D double‐stranded chains are formed, and then extended to a 3D supramolecular architecture combining second‐sphere hydrogen‐bonded interactions. For 2 , fum dianion takes on bis‐dentate bridging coordination fashion, furnishing a 2‐fold interpenetrated 2D→2D (4,4) layered coordination network, in which the tetrahedral Zn^II atoms are interlinked by 4‐dps and fum. Additionally, the compound 2 shows strong fluorescence in the solid state at room temperature.     

Spectroscopic,Thermal, and Structural Studies of Two New Co‐Crystals of [4,4′‐Bithiazole]‐2,2′‐diamine

Two new 2 : 1 co‐crystals based on [4,4′‐bithiazole]‐2,2′‐diamine (=2,2′‐diamino‐4,4′‐bithiazole (DABTZ)) with 2,2′‐bipyridine (bipy) and benzo‐18‐crown‐6 (bk) were synthesized by slow‐evaporation method in MeOH. These co‐crystals were characterized by means of elemental analysis, and IR, and ¹H‐ and ¹³C‐NMR spectroscopy. Also, thermal analyses under air atmosphere and X‐ray crystallography have been performed on these structures. X‐Ray single‐crystal analyses revealed that these networks contain large vacant voids. These structures, [(DABTZ)₂(bipy)] and [(DABTZ)₂(bk)(MeOH)], crystallized in monoclinic and triclinic forms with space groups of P2₁/c and P , respectively. The self‐assembly of these compounds in the solid state is likely caused by both H‐bonding and π? π stacking.     

Hydrogen‐bonded layers in the 1:2 cocrystal of 2,2′‐dithiodibenzoic acid with isonicotinohydrazide

Cocrystallization of 2,2′‐dithiodibenzoic acid with isonicotinohydrazide from methanol solution yields the 1:2 cocrystal 2,2′‐dithiodibenzoic acid–isonicotinohydrazide (1/2), C₁₄H₁₀O₄S₂·2C₆H₇N₃O. The component molecules are linked by intermolecular O—H...N, N—H...O, N—H...N and C—H...O hydrogen bonds into layers running parallel to the (010) plane, and these layers are further linked into a three‐dimensional framework structure by means of weak aromatic π–π stacking interactions. As a potential cocrystallization agent, isonicotinohydrazide may be used for effective and versatile synthetic supramolecular strategies utilizing hydrogen bonding of specific molecular building blocks.     

Specific Intermolecular Interactions in the Supramolecular Structure of 5‐Hydroxy‐6‐Methyluracil: A DFT Study of the Hydrogen‐bonded Dimers

Studying the self‐assembly of uracil derivatives has great importance for biochemistry and nanotechnology. For example, modification of the sorbent surfaces by 5‐hydroxy‐6‐methyluracil (HMU ) enhances their adsorption activity. It is assumed that these changes are caused by the self‐assembly of the network‐like supramolecular associates of the uracil derivative on the sorbent surface. In the present work, the relative stabilities of 15 hydrogen‐bonded dimers HMU have been studied by the TPSSh /TZVP density functional theory method and the strengths of the noncovalent interactions analyzed in terms of the reduced density gradient and natural bond orbital approaches. It was found that the symmetric dimer stabilized by two intermolecular hydrogen bonds N1 –H∙∙∙O–C2 (dimer 1‐1) is the most stable. This suggests that the self‐assembly of HMU should occur through the intermediate formation of the dimer 1‐1. The results may be useful for understanding the processes of self‐assembly of the uracil derivatives and the rationalized design of the uracil‐based supramolecular structures with specific properties.     

Hydrogen‐bonded assemblies in the molecular crystals of 2,2′‐thiodiacetic acid with ethylenediamine and o‐phenylenediamine

Carboxylate molecular crystals have been of interest due to the presence of hydrogen bonding, which plays a significant role in chemical and crystal engineering, as well as in supramolecular chemistry. Acid–base adducts possess hydrogen bonds which increase the thermal and mechanical stability of the crystal. 2,2′‐Thiodiacetic acid (Tda) is a versatile ligand that has been widely explored, employing its multidendate and chelating coordination abilities with many metals; however, charge‐transfer complexes of thiodiacetic acid have not been reported. Two salts, namely ethylenediaminium 2,2′‐thiodiacetate, C₂H₁₀N₂²⁺·C₄H₄O₄S₂²⁻, denoted Tdaen, and 2‐aminoanilinium 2‐(carboxymethylsulfanyl)acetate, C₆H₉N₂⁺·C₄H₅O₄S⁻, denoted Tdaophen, were synthesized and characterized by IR, ¹H and ¹³C NMR spectroscopies, and single‐crystal X‐ray diffraction. In these salts, Tda reacts with the aliphatic (ethylenediamine) and aromatic (o‐phenylenediamine) diamines, and deprotonates them to form anions with different valencies and different supramolecular networks. In Tdaen, the divalent Tda²⁻ anions form one‐dimensional linear supramolecular chains and these are extended into a three‐dimensional sandwich‐type supramolecular network by interaction with the ethylenediaminium cations. However, in Tdaophen, the monovalent Tda⁻ anions form one‐dimensional zigzag supramolecular chains, which are extended into a three‐dimensional supramolecular network by interaction with the 2‐aminoanilinium cations. Thus, both three‐dimensional structures display different ring motifs. The structures of these diamines, which are influenced by hydrogen‐bonded assemblies in the molecular crystals, are discussed in detail.     

The 3D Supramolecular Compound {[Cu2(L‐val)2(4,4′‐bipy)(H2O)2](NO3)2}n (L‐val = L‐valine anion, 4,4′‐bipy = 4,4′‐bipyridine)

{[Cu₂(L‐val)₂(4,4′‐bipy)(H₂O)₂](NO₃)₂}_n was synthesized and its crystal structure was determined by X‐ray diffraction. In the presence of 4,4′‐bipyridine, deprotoned L‐valine chelates Cu^II ions into coordination layers which were linked into a framework by hydrogen‐bonded chains resulting from nitrate anions and water molecules.     

Metal‐4,4′‐azobis(3,5‐dimethyl‐1H‐pyrazole) Complexes with Seven‐ and Nine‐membered Hydrogen‐bonded Rings Originating from the Pyrrolic NH Function

The metal complexes [Cu(NO₃)₂(H₂O)₂(H₂azbpz)₂] · 2H₂O ( 1 ) and [Ni(H₂O)₄(H₂azbpz)₂](NO₃)₂ · 2H₂O ( 2 ) of 4,4′‐azobis(3,5‐dimethyl‐1H‐pyrazole) (H₂azbpz) incorporate the bipyrazole as a monodentate ligand and are associated into supramolecular architectures by hydrogen bonds and azo‐pz π interactions in the solid state. In 1 a cis configuration is integrated and the NH function adjacent to the metal‐coordinating nitrogen atom gives rise to a seven‐membered anion‐assisted hydrogen‐bonded ring around the central metal atom bringing the NH function in endo‐position to the azo‐bridge. The interplay of hydrogen‐bonds and dimeric azo‐pz π interactions in 1 forms one‐dimensional supramolecular chains, which are further interconnected by a heterodromic D_2h symmetric tetrameric water ring. In 2 a trans form of H₂azbpz is mono‐coordinated and the synergy of hydrogen‐bonded rings around the central metal atom and continuous azo‐pz π interactions form a two‐dimensional supramolecular network structure. The supramolecular packings of 1 and 2 is further underpinned by the analysis of their Hirshfeld surface areas.     

Syntheses,Structures and Characterization of Four Metal‐Organic Frameworks constructed by 2,2′,6,6′‐Tetramethoxy‐4,4′‐biphenyldicarboxylic Acid

Four metal‐organic frameworks (MOFs), {[Mn_3.5L(OH)(HCOO)₄(DMF)] · H₂O} ( 1 ), {[In_2.5L₂O(OH)_1.5(H₂O)₂] · DMF · CH₃CN · 2H₂O} ( 2 ), {[Pb₄L₃O(DMA)] · CH₃CN} ( 3 ), and {[LaL(NO₃)(DMF)₂] · 2H₂O} ( 4 ) were synthesized by utilizing the ligand 2,2′,6,6′‐tetramethoxy‐4,4′‐biphenyldicarboxylic acid (H₂L) via solvothermal methods. All MOFs were characterized by single‐crystal X‐ray diffraction, powder X‐ray diffraction, thermogravimetric analysis, and infrared spectroscopy. In 1 , the Mn²⁺ ions are interconnected by formic groups in situ produced via DMF decomposition to form a rare 2D macrocyclic plane, which is further linked by L^2– to construct the final 3D network. In 2 , 1D zip‐like infinite chain is formed and then interconnected to build the 3D framework. In 3 , a [Pb₆(μ₄‐O)₂(O₂C)₁₀(DMA)₂] cluster with a centrosymmetric [Pb₆(μ₄‐O)₂]⁸⁺ octahedral core is formed in the 3D structure. In 4 , the La³⁺ ions are connected with each other through carboxylate groups of L^2– to generate 1D zigzag chain, which is further linked by L^2– to construct a 3D network with sra topology. Solid photoluminescence properties of 3 and 4 were also investigated.     

7,7′‐Diamino‐2,2′‐diindolylmethane: A Building Block for Highly Efficient and Selective Anion Receptors—Studies in Solution and in the Solid State

The easy‐to‐make 7,7′‐diamino‐2,2′‐diindolylmethane was used as a building block for the construction of anion receptors operating by hydrogen bonds. Its various bisamide and bisurea derivatives were designed and synthesised as acyclic as well as macrocyclic molecules, then their structural and anion binding properties were studied in solution and in the solid state. The bisamide receptors demonstrate high affinity towards oxoanions in highly polar and partially aqueous solutions (DMSO with up to 25 % H₂O) with significant selectivity for dihydrogen phosphate. Remarkably, the bisurea‐based molecules are able to bind anionic guests even in pure methanol and show selectivity toward tetrahedral oxoanions, that is, hydrogen sulphate and dihydrogen phosphate. X‐ray analysis revealed that both classes of molecules adopt a similar conformation in the solid state: a bent sheet shape with a binding pocket equipped with hydrogen‐bond donors (four for the amides and six for the bisureas), whose orientation is particularly tailored for oxoanions. The results of ROESY NMR experiments are in agreement with the findings for the solid state and confirmed that both bisamides and bisureas can easily adapt the conformation with convergent hydrogen‐bond donors, which is highly suitable for anion binding.     

2,2′,4,4′,6,6′‐Hexa­methyl‐4,4′‐bi­[4H‐pyran­yl]

The title mol­ecule, C₁₆H₂₂O₂, reveals C_i point symmetry in the crystal structure. The structure was disordered. The pyran ring is not planar; the O atom lies significantly out of the least‐squares plane (ten times the r.m.s. deviation of all six atoms).     

Pseudopolymorphism in hydroxybenzophenones: the dihydrate of 2,2′,4,4′‐tetrahydroxybenzophenone

A dihydrate pseudopolymorph of bis(2,4‐dihydroxyphenyl)methanone, C₁₃H₁₀O₅·2H₂O, (I), was obtained during polymorphism screening of hydroxybenzophenone derivatives. This structure, in which the molecule sits on a twofold axis, was compared with the known anhydrous form of (I) [Schlemper (1982). Acta Cryst. B 38 , 554–559]. The role of water in the crystal assembly was established on the basis of the known monohydrate pseudopolymorph of 3,4‐dihydroxybenzophenone [Landre, Souza, Corrêa, Martins & Doriguetto (2010). Acta Cryst. C 66 , o463–o465].     

4,4′‐Bis(2,2,2‐trifluoroethoxymethyl)‐2,2′‐bipyridine

As part of a homologous series of novel polyfluorinated bipyridyl (bpy) ligands, the title compound, C₁₆H₁₄F₆N₂O₂, contains the smallest fluorinated group, viz. CF₃. The molecule resides on a crystallographic inversion centre at the mid‐point of the pyridine C_ipso—C_ipso bond. Therefore, the bpy skeleton lies in an anti conformation to avoid repulsion between the two pyridyl N atoms. Weak intramolecular C—H...N and C—H...O interactions are observed, similar to those in related polyfluorinated bpy–metal complexes. A π–π interaction is observed between the bpy rings of adjacent molecules and this is probably a primary driving force in crystallization. Weak intermolecular C—H...N hydrogen bonding is present between one of the CF₃CH₂– methylene H atoms and a pyridyl N atom related by translation along the [010] direction, in addition to weak benzyl‐type C—H...F interactions to atoms of the terminal CF₃ group. It is of note that the O—CH₂CF₃ bond is almost perpendicular to the bpy plane.     

Building Functionality into 4′‐Hydrazone Derivatives of 2,2′: 6′,2″‐Terpyridine

The syntheses of the five 2,2′: 6′,2″‐terpyridine (tpy) ligands 5 – 9 functionalized in the 4′‐position with a hydrazone substituent RR′C?N? NH (R=R′=Me; R=H, R′=4‐BrC₆H₄, 4‐O₂NC₆H₄, 4‐MeOC₆H₄, or 3,5‐(MeO)₂C₆H₃) are described. Protonation of the tpy domain of the ligands is facile. Solution behaviour has been studied by NMR and electronic spectroscopies. Representative structural data are presented for neutral and monoprotonated ligands, and illustrate that H‐bonding involving the formal amine NH unit is a dominant structural motif in all cases.     

Supramolecular Assemblies of (±-2,2''''-Dihydroxy-1,1''''-binaphthyl with 2,2''''-Bipyridine and Naphthodiazine

Introduction Optically active 1,1'-bi-2-naphthol (BINOL) and its derivatives have been widely used as chiral ligands of catalysts for asymmetric reactions and effective host compounds for the isolation or optical resolution of a wide range of organic guest molecules through the for-mation of crystalline inclusion complexes.1,2 The wide-ranging and important applications of these com-pounds in organic synthesis have stimulated great inter-est in developing efficient methods for their prepara-…     

Anion Controlled Supramolecular Self‐Assembly of Tetraprotonated Tris[2‐(benzylamino)ethyl]amine

The novel supramolecular assembly of composition [{(bz₃tren)H₄}⁴⁺ · (ReO₄)^— · 3(Cl)^—] resulted from the self‐organization of a mixture of tris[2‐(benzylamino)ethyl]amine (bz₃tren), HCl and NH₄ReO₄ at a molar ratio of 1:4.7:1 in methanol. The crystal architecture is characterized by stacks of repeating sandwich‐type building blocks that contain charge‐assisted N—H···O(Re) hydrogen bonds [N···O 2.81‐2.86Å] and weaker C—H···O(Re) interactions [C···O 3.11Å]. The stacks are further linked by N—H···Cl [N···Cl 3.03Å] and weaker C—H···Cl [C···Cl 3.47‐3.74Å] interactions into two‐dimensional layers bordered by the benzyl groups of the [(bz₃tren)H₄]⁴⁺ cations. Edge‐to‐face C—H···π interactions involving the aromatic rings occur within and between the layers. The protonation constants of bz₃tren in methanol were determined by potentiometric titration. The corresponding structures of the ligand in its different protonation states were calculated at the DFT‐level.     

Hydrogen‐bonded complexes of nicotine with simple alcohols

Ab initio and density functional theory studies have been performed on the hydrogen‐bonded complexes of neutral and protonated nicotine with ethanol, methanol, and trifluromethanol to explore their relative stability in a systematic way. Among all the hydrogen‐bonded nicotine complexes considered here, protonated forms in nicotine–ethanol and nicotine–methanol, and neutral form in nicotine–trifluromethanol complexes have been found to be the most stable. In the former two complexes, the proton attached to the pyrrolidine nitrogen acts as a strong hydrogen bond donor, whereas the pyrrolidine nitrogen atom acts as a hydrogen bond acceptor in the latter case. Neutral complex of nicotine with trifluromethanol has been found to possess a very short hydrogen bond (1.57 Å) and basis set superposition error corrected hydrogen bond energy value of 19 kcal/mol. The nature of the various hydrogen bonds formed has been investigated through topological aspects using Bader's atoms in molecules theory. From the calculated topological results, excellent linear correlation is shown to exist among the hydrogen bond length, electron density, and its Laplacian at the bond critical points for all the complexes considered. The natural bond orbital analysis has been carried out to investigate the charge transfer in the nicotine alcohol complexes. In contrast to the blue shifting behavior that is generally exhibited by other C? H···O hydrogen bonds involving sp³ carbon atom, the C? H···O hydrogen bond in the protonated nicotine–ethanol and methanol complexes has been found to be proper with red shifting in nature. © 2011 Wiley Periodicals, Inc.     

Anion Recognition with Hydrogen‐Bonding Cyclodiphosphazanes

Modular cyclodiphosph(V)azanes are synthesised and their affinity for chloride and actetate anions were compared to those of a bisaryl urea derivative ( 1 ). The diamidocyclodiphosph(V)azanes cis‐[{ArNHP(O)(μ‐tBu)}₂] [Ar=Ph ( 2 ) and Ar=m‐(CF₃)₂Ph ( 3 )] were synthesised by reaction of [{ClP(μ‐NtBu)}₂] ( 4 ) with the respective anilines and subsequent oxidation with H₂O₂. Phosphazanes 2 and 3 were obtained as the cis isomers and were characterised by multinuclear NMR spectroscopy, FTIR spectroscopy, HRMS and single‐crystal X‐ray diffraction. The cyclodiphosphazanes 2 and 3 readily co‐crystallise with donor solvents such as MeOH, EtOH and DMSO through bidentate hydrogen bonding, as shown in the X‐ray analyses. Cyclodiphosphazane 3 showed a remarkably high affinity (log[K]=5.42) for chloride compared with the bisaryl urea derivative 1 (log[K]=4.25). The affinities for acetate (AcO^?) are in the same range ( 3 : log[K]=6.72, 1 : log[K]=6.91). Cyclodiphosphazane 2 , which does not contain CF₃ groups, exhibits weaker binding to chloride (log[K]=3.95) and acetate (log[K]=4.49). DFT computations and X‐ray analyses indicate that a squaramide‐like hydrogen‐bond directionality and C_α?H interactions account for the efficiency of 3 as an anion receptor. The C_α?H groups stabilise the Z,Z‐ 3 conformation, which is necessary for bidentate hydrogen bonding, as well as coordinating with the anion.     

Electrochemical Approach to the Radical Anion Formation from 2′‐Hydroxy Chalcone Derivatives

Three 2′‐hydroxy chalcone derivatives were electrochemically reduced to the radical anion by a reversible one‐electron transfer followed by a chemical dimerization reaction. Under suitable conditions of the medium, the one‐electron reduction produces very well resolved cyclic voltammograms due to the formation of the radical anion. By using appropriately the wide versatility of the cyclic voltammetric technique, was possible to study the generation of the radical anion and its stability.     

Mononuclear Carbene Dithiolate [Ni(NHX)(′S2C ′)] Complexes with HNX = HNPiPr3 or HNSPh2 Coligands (′S2C ′ 2– = 1,3‐ImidazolidinylN,N′‐bis(2‐benzenethiolate)(2–))

Cleavage reactions of the dinuclear [{Ni(′S₂C ′)}₂] · DMF (′S₂C ′ ^2– = 1,3‐imidazolidinyl‐N,N′‐bis(2‐benzenethiolate)(2–)) with HNPiPr₃ or HNSPh₂ yielded the mononuclear complexes [Ni(NHPiPr₃)(′S₂C ′)] ( 1 ) and [Ni(NHSPh₂)(′S₂C ′)] ( 2 ) which have been completely characterized. The nickel‐carbene‐dithiolate [Ni(′S₂C ′)] moiety is one of the very rare complex fragments that are able to coordinate both HNPR₃ or HNSR₂. IR spectra and X‐ray structure determinations show that 1 and 2 exhibit intramolecular N–H…S(thiolate) hydrogen bonds. Geometric parameters and NMR spectroscopic data of 1 and 2 are compatible with N–X single bonds and ylidic structures of the HNPiPr₃ and HNSPh₂ ligands. Comparison of Ni–N distances in diamagnetic and paramagnetic [Ni(NHSPh₂)] complexes was rendered possible through the X‐ray structure determination of the homoleptic [Ni(NHSPh₂)₆]Cl₂ ( 3 ) which formed as minor by‐product in the synthesis of 2 .